/****************************************************************************

**

** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).

** All rights reserved.

** Contact: Nokia Corporation (qt-info@nokia.com)

**

** This file is part of the documentation of the Qt Toolkit.

**

** $QT_BEGIN_LICENSE:LGPL$

** No Commercial Usage

** This file contains pre-release code and may not be distributed.

** You may use this file in accordance with the terms and conditions

** contained in the Technology Preview License Agreement accompanying

** this package.

**

** GNU Lesser General Public License Usage

** Alternatively, this file may be used under the terms of the GNU Lesser

** General Public License version 2.1 as published by the Free Software

** Foundation and appearing in the file LICENSE.LGPL included in the

** packaging of this file.  Please review the following information to

** ensure the GNU Lesser General Public License version 2.1 requirements

** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.

**

** In addition, as a special exception, Nokia gives you certain additional

** rights.  These rights are described in the Nokia Qt LGPL Exception

** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.

**

** If you have questions regarding the use of this file, please contact

** Nokia at qt-info@nokia.com.

**

**

**

**

**

**

**

**

** $QT_END_LICENSE$

**

****************************************************************************/

/*!

    \example widgets/sliders

    \title Sliders Example

    Qt provides three types of slider-like widgets: QSlider,

    QScrollBar and QDial. They all inherit most of their

    functionality from QAbstractSlider, and can in theory replace

    each other in an application since the differences only concern

    their look and feel. This example shows what they look like, how

    they work and how their behavior and appearance can be

    manipulated through their properties.

    The example also demonstrates how signals and slots can be used to

    synchronize the behavior of two or more widgets.

    \image sliders-example.png Screenshot of the Sliders example

    The Sliders example consists of two classes:

    \list

    \o \c SlidersGroup is a custom widget. It combines a QSlider, a

    QScrollBar and a QDial.

    \o \c Window is the main widget combining a QGroupBox and a

    QStackedWidget. In this example, the QStackedWidget provides a

    stack of two \c SlidersGroup widgets. The QGroupBox contain

    several widgets that control the behavior of the slider-like

    widgets.

    \endlist

    First we will review the \c Window class, then we

    will take a look at the \c SlidersGroup class.

    \section1 Window Class Definition

    \snippet examples/widgets/sliders/window.h 0

    The \c Window class inherits from QWidget. It displays the slider

    widgets and allows the user to set their minimum, maximum and

    current values and to customize their appearance, key bindings

    and orientation. We use a private \c createControls() function to

    create the widgets that provide these controlling mechanisms and

    to connect them to the slider widgets.

    \section1 Window Class Implementation

    \snippet examples/widgets/sliders/window.cpp 0

    In the constructor we first create the two \c SlidersGroup

    widgets that display the slider widgets horizontally and

    vertically, and add them to the QStackedWidget. QStackedWidget

    provides a stack of widgets where only the top widget is visible.

    With \c createControls() we create a connection from a

    controlling widget to the QStackedWidget, making the user able to

    choose between horizontal and vertical orientation of the slider

    widgets. The rest of the controlling mechanisms is implemented by

    the same function call.

    \snippet examples/widgets/sliders/window.cpp 1

    \snippet examples/widgets/sliders/window.cpp 2

    Then we connect the \c horizontalSliders, \c verticalSliders and

    \c valueSpinBox to each other, so that the slider widgets and the

    control widget will behave synchronized when the current value of

    one of them changes. The \c valueChanged() signal is emitted with

    the new value as argument. The \c setValue() slot sets the

    current value of the widget to the new value, and emits \c

    valueChanged() if the new value is different from the old one.

    We put the group of control widgets and the stacked widget in a

    horizontal layout before we initialize the minimum, maximum and

    current values. The initialization of the current value will

    propagate to the slider widgets through the connection we made

    between \c valueSpinBox and the \c SlidersGroup widgets. The

    minimum and maximum values propagate through the connections we

    created with \c createControls().

    \snippet examples/widgets/sliders/window.cpp 3

    \snippet examples/widgets/sliders/window.cpp 4

    In the private \c createControls() function, we let a QGroupBox

    (\c controlsGroup) display the control widgets. A group box can

    provide a frame, a title and a keyboard shortcut, and displays

    various other widgets inside itself. The group of control widgets

    is composed by two checkboxes, three spin boxes (with labels) and

    one combobox.

    After creating the labels, we create the two checkboxes.

    Checkboxes are typically used to represent features in an

    application that can be enabled or disabled. When \c

    invertedAppearance is enabled, the slider values are inverted.

    The table below shows the appearance for the different

    slider-like widgets:

    \table

    \header \o                \o{2,1} QSlider                   \o{2,1} QScrollBar                \o{2,1} QDial

    \header \o                \o Normal        \o Inverted      \o Normal        \o Inverted      \o Normal         \o Inverted

    \row    \o Qt::Horizontal \o Left to right \o Right to left \o Left to right \o Right to left \o Clockwise \o Counterclockwise

    \row    \o Qt::Vertical   \o Bottom to top \o Top to bottom \o Top to bottom \o Bottom to top \o Clockwise \o Counterclockwise

    \endtable

    It is common to invert the appearance of a vertical QSlider. A

    vertical slider that controls volume, for example, will typically

    go from bottom to top (the non-inverted appearance), whereas a

    vertical slider that controls the position of an object on screen

    might go from top to bottom, because screen coordinates go from

    top to bottom.

    When the \c invertedKeyBindings option is enabled (corresponding

    to the QAbstractSlider::invertedControls property), the slider's

    wheel and key events are inverted. The normal key bindings mean

    that scrolling the mouse wheel "up" or using keys like page up

    will increase the slider's current value towards its maximum.

    Inverted, the same wheel and key events will move the value

    toward the slider's minimum. This can be useful if the \e

    appearance of a slider is inverted: Some users might expect the

    keys to still work the same way on the value, whereas others

    might expect \key PageUp to mean "up" on the screen.

    Note that for horizontal and vertical scroll bars, the key

    bindings are inverted by default: \key PageDown increases the

    current value, and \key PageUp decreases it.

    \snippet examples/widgets/sliders/window.cpp 5

    \snippet examples/widgets/sliders/window.cpp 6

    Then we create the spin boxes. QSpinBox allows the user to choose

    a value by clicking the up and down buttons or pressing the \key

    Up and \key Down keys on the keyboard to modify the value

    currently displayed. The user can also type in the value

    manually. The spin boxes control the minimum, maximum and current

    values for the QSlider, QScrollBar, and QDial widgets.

    We create a QComboBox that allows the user to choose the

    orientation of the slider widgets. The QComboBox widget is a

    combined button and popup list. It provides a means of presenting

    a list of options to the user in a way that takes up the minimum

    amount of screen space.

    \snippet examples/widgets/sliders/window.cpp 7

    \snippet examples/widgets/sliders/window.cpp 8

    We synchronize the behavior of the control widgets and the slider

    widgets through their signals and slots. We connect each control

    widget to both the horizontal and vertical group of slider

    widgets. We also connect \c orientationCombo to the

    QStackedWidget, so that the correct "page" is shown. Finally, we

    lay out the control widgets in a QGridLayout within the \c

    controlsGroup group box.

    \section1 SlidersGroup Class Definition

    \snippet examples/widgets/sliders/slidersgroup.h 0

    The \c SlidersGroup class inherits from QGroupBox. It provides a

    frame and a title, and contains a QSlider, a QScrollBar and a

    QDial.

    We provide a \c valueChanged() signal and a public \c setValue()

    slot with equivalent functionality to the ones in QAbstractSlider

    and QSpinBox. In addition, we implement several other public

    slots to set the minimum and maximum value, and invert the slider

    widgets' appearance as well as key bindings.

    \section1 SlidersGroup Class Implementation

    \snippet examples/widgets/sliders/slidersgroup.cpp 0

    First we create the slider-like widgets with the appropiate

    properties. In particular we set the focus policy for each

    widget. Qt::FocusPolicy is an enum type that defines the various

    policies a widget can have with respect to acquiring keyboard

    focus. The Qt::StrongFocus policy means that the widget accepts

    focus by both tabbing and clicking.

    Then we connect the widgets with each other, so that they will

    stay synchronized when the current value of one of them changes.

    \snippet examples/widgets/sliders/slidersgroup.cpp 1

    \snippet examples/widgets/sliders/slidersgroup.cpp 2

    We connect \c {dial}'s \c valueChanged() signal to the

    \c{SlidersGroup}'s \c valueChanged() signal, to notify the other

    widgets in the application (i.e., the control widgets) of the

    changed value.

    \snippet examples/widgets/sliders/slidersgroup.cpp 3

    \codeline

    \snippet examples/widgets/sliders/slidersgroup.cpp 4

    Finally, depending on the \l {Qt::Orientation}{orientation} given

    at the time of construction, we choose and create the layout for

    the slider widgets within the group box.

    \snippet examples/widgets/sliders/slidersgroup.cpp 5

    \snippet examples/widgets/sliders/slidersgroup.cpp 6

    The \c setValue() slot sets the value of the QSlider. We don't

    need to explicitly call

    \l{QAbstractSlider::setValue()}{setValue()} on the QScrollBar and

    QDial widgets, since QSlider will emit the

    \l{QAbstractSlider::valueChanged()}{valueChanged()} signal when

    its value changes, triggering a domino effect.

    \snippet examples/widgets/sliders/slidersgroup.cpp 7

    \snippet examples/widgets/sliders/slidersgroup.cpp 8

    \codeline

    \snippet examples/widgets/sliders/slidersgroup.cpp 9

    \snippet examples/widgets/sliders/slidersgroup.cpp 10

    The \c setMinimum() and \c setMaximum() slots are used by the \c

    Window class to set the range of the QSlider, QScrollBar, and

    QDial widgets.

    \snippet examples/widgets/sliders/slidersgroup.cpp 11

    \snippet examples/widgets/sliders/slidersgroup.cpp 12

    \codeline

    \snippet examples/widgets/sliders/slidersgroup.cpp 13

    \snippet examples/widgets/sliders/slidersgroup.cpp 14

    The \c invertAppearance() and \c invertKeyBindings() slots

    control the child widgets'

    \l{QAbstractSlider::invertedAppearance}{invertedAppearance} and

    \l{QAbstractSlider::invertedControls}{invertedControls}

    properties.

*/