/****************************************************************************

**

** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).

** All rights reserved.

** Contact: Nokia Corporation (qt-info@nokia.com)

**

** This file is part of the Qt Mobility Components.

**

** $QT_BEGIN_LICENSE:LGPL$

** No Commercial Usage

** This file contains pre-release code and may not be distributed.

** You may use this file in accordance with the terms and conditions

** contained in the Technology Preview License Agreement accompanying

** this package.

**

** GNU Lesser General Public License Usage

** Alternatively, this file may be used under the terms of the GNU Lesser

** General Public License version 2.1 as published by the Free Software

** Foundation and appearing in the file LICENSE.LGPL included in the

** packaging of this file.  Please review the following information to

** ensure the GNU Lesser General Public License version 2.1 requirements

** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.

**

** In addition, as a special exception, Nokia gives you certain additional

** rights.  These rights are described in the Nokia Qt LGPL Exception

** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.

**

** If you have questions regarding the use of this file, please contact

** Nokia at qt-info@nokia.com.

**

**

**

**

**

**

**

**

** $QT_END_LICENSE$

**

****************************************************************************/

#include "qcontactaction.h"

#include "qcontactmanager_p.h"

#include "qcontactactiondescriptor.h"

#include <QSet>

#include <QString>

QTM_BEGIN_NAMESPACE

QContactAction::~QContactAction()

{

}

/*!

  \class QContactAction

  \brief The QContactAction class provides an interface for performing an

  action on a QContact or QContactDetail.

  \ingroup contacts-main

  \ingroup contacts-actions

  An action is anything that can be performed on a contact, or a detail of a contact.  An example

  of an action might be "Send Email" or "Dial" or "Plot Navigation Route".  One action may be

  implemented by multiple vendors, and indeed one vendor may provide multiple implementations of

  the same action.  The name of an action identifies its semantics, while its implementation version

  distinguishes it from other implementations of the action by the same vendor.

  Invocation of an action is asynchronous; at some stage after calling \l invokeAction() the

  action instance will emit the \l stateChanged() signal.  Any results of the action may be retrieved

  by calling \l results(), and as results become available the action will emit \l resultsAvailable().

  Each instance of a QContactAction is created by a \l QContactActionFactory when

  \l QContactActionFactory::instance() is called; the caller takes ownership of the action instance.

  \sa QContactActionFactory, QContactActionFilter

 */

/*!

  \fn QContactAction::~QContactAction()

  Clears any memory in use by this instance of the action implementation

 */

/*!

  \fn QContactAction::actionDescriptor() const

  Returns the descriptor which uniquely identifies this action implementation.  A descriptor

  consists of an action name, a vendor name and an implementation version.

  The name of the action identifies the action provided; different implementations of an action

  with the same name must provide the same functionality, but may differ in implementation semantics.

  Hence, the action name includes the major version of the interface definition implemented.

  The vendor name is the identification string of the vendor which has provided this implementation.

  The implementation version is the (minor) version of the implementation, and is vendor-specific.

  \sa QContactActionDescriptor

 */

/*!

  \fn QContactAction::state() const

  Returns the current state of the action.

  \sa stateChanged()

 */

/*!

  \fn QContactAction::metaData() const

  Returns the meta-data associated with this action, such as icons, labels or sound cues

 */

/*!

  \fn QContactAction::contactFilter(const QVariant& value) const

  Returns a filter which may be used to filter contacts by the availability of this action implementation for them.

  If \a value is valid, only contacts which have a detail with the given value and for which the action is available are returned

 */

/*!

  \fn QContactAction::isDetailSupported(const QContactDetail &detail, const QContact &contact = QContact()) const

  Returns true if the provided \a detail contains the fields required for this action to be

  performed on it; otherwise, returns false.

  Some actions may require other information to be available in order to complete successfully; in that case,

  the action will also inspect the given \a contact to ensure that it contains the information required.

  If the contact contains the required information, the function will return true; otherwise, returns false.

 */

/*!

  \fn QContactAction::supportedDetails(const QContact& contact) const

  Returns a list of the details saved in the given \a contact which contain the fields required

  for this action to be performed on them.

  The default implementation of this function simply tests all the details in the contact

  using \l isDetailSupported()

 */

QList<QContactDetail> QContactAction::supportedDetails(const QContact& contact) const

{

    QList<QContactDetail> ret;

    QList<QContactDetail> details = contact.details();

    for (int j=0; j < details.count(); j++) {

        if (isDetailSupported(details.at(j), contact))

            ret.append(details.at(j));

    }

    return ret;

}

/*!

  \fn QContactAction::invokeAction(const QContact& contact, const QContactDetail& detail = QContactDetail(), const QVariantMap& parameters = QVariantMap())

  Initiates the implemented action on the specified \a detail of the given \a contact, or on the first

  eligible detail saved in the contact if the given \a detail is empty, with the given \a parameters specified.

  At some point after invocation, one or more \l resultsAvailable() signals will be emitted by the action instance.

  The results of the action (if any) may be retrieved by calling \l results().

  When the state of the action changes, the \l stateChanged() signal will be emitted.

  Returns true if the action was invoked successfully, otherwise false.  The return value says nothing

  about whether the action which was invoked was successful or not, only whether it was initiated or

  the request for it to be initiated was sent successfully (e.g., if the action is implemented as a one-way

  RPC call).

  \sa results(), stateChanged()

 */

/*!

  \fn QContactAction::results() const

  Returns the result of the action, if any exists.  Calling this function prior to receiving the \l resultsAvailable()

  signal will not return a meaningful result.

 */

/*!

  \enum QContactAction::State

  Describes the current status of the asynchronous action operation

  \value InactiveState The operation has not yet been initiated

  \value FinishedDetachedState The operation was initiated but no further information is or will be available

  \value ActiveState The operation was initiated and is not yet finished

  \value FinishedState The operation successfully completed

  \value FinishedWithErrorState The operation has finished, but an error occurred

 */

/*!

  \fn QContactAction::resultsAvailable()

  This signal is emitted by an action instance whose functionality has been initiated with \l invokeAction()

  when results of the action are available.  Not all actions will have results, and these

  actions will not emit the resultsAvailable() signal.

  If the action implementation is incapable of reporting results of the operation (for example, the

  action is implemented via a one-way IPC call) it should transition to the \c QContactAction::FinishedDetachedState state

  immediately upon invocation.

 */

/*!

  \fn QContactAction::stateChanged(QContactAction::State newState)

  This signal is emitted when the state of an action changes to the given \a newState.

  \sa state()

 */

/*!

  Returns a list of identifiers of the available actions which are provided by the given \a vendor and of the given \a implementationVersion.

  If \a vendor is empty, actions from all vendors and of any implementation version are returned; if \a implementationVersion is empty,

  any actions from the given \a vendor (regardless of implementation version) are returned.

 */

QStringList QContactAction::availableActions(const QString& vendor, int implementationVersion)

{

    // SLOW naive implementation...

    QSet<QString> ret;

    QContactManagerData::loadFactories();

    QList<QContactActionDescriptor> actionDescriptors = QContactManagerData::actionDescriptors(QString(), vendor, implementationVersion);

    for (int i = 0; i < actionDescriptors.size(); i++) {

        QContactActionDescriptor descriptor = actionDescriptors.at(i);

        ret.insert(descriptor.actionName());

    }

    return ret.toList();

}

/*!

  Returns a list of QContactActionDescriptor instances which identified implementations of the given \a actionName which are provided by the

  given \a vendorName and are of the given \a implementationVersion.  If \a actionName is empty, descriptors for

  implementations of all actions are returned; if \a vendorName is empty, descriptors for implementations provided by any vendor and

  of any implementation version are returned; if \a implementationVersion is empty, descriptors for any implementations provided by the

  given \a vendorName of the given \a actionName are returned.

 */

QList<QContactActionDescriptor> QContactAction::actionDescriptors(const QString& actionName, const QString& vendorName, int implementationVersion)

{

    QContactManagerData::loadFactories();

    return QContactManagerData::actionDescriptors(actionName, vendorName, implementationVersion);

}

/*!

  Returns a pointer to a new instance of the action implementation identified by the given \a descriptor.

  The caller takes ownership of the action implementation and must delete it to avoid leaking memory.

 */

QContactAction* QContactAction::action(const QContactActionDescriptor& descriptor)

{

    QContactManagerData::loadFactories();

    return QContactManagerData::action(descriptor);

}

#include "moc_qcontactaction.cpp"

QTM_END_NAMESPACE