#

# This is STIFTestFramework initialization file

# Comment lines start with '#'-character.

# See STIF TestFramework users guide.doc for instructions

# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

# Set following test engine settings:

# - Set Test Reporting mode. TestReportMode's possible values are:

#     + 'Summary': Summary of the tested test cases.

#     + 'Environment': Hardware and software info.

#     + 'TestCases': Test case report.

#     + 'FullReport': Set of all above ones.

#     + Example 'TestReportMode= Summary TestCases'

#

#     - CreateTestReport setting controls report creation mode

#     + YES, Test report will created.

#     + NO, No Test report.

#

#     - File path indicates the base path of the test report.

#     - File name indicates the name of the test report.

#

#     - File format indicates the type of the test report.

#     + TXT, Test report file will be txt type, for example 'TestReport.txt'.

#     + HTML, Test report will be html type, for example 'TestReport.html'.

#

#     - File output indicates output source of the test report.

#     + FILE, Test report logging to file.

#     + RDEBUG, Test report logging to using rdebug.

#

#     - File Creation Mode indicates test report overwriting if file exist.

#     + OVERWRITE, Overwrites if the Test report file exist.

#     + APPEND, Continue logging after the old Test report information if 

#           report exist.

[Engine_Defaults]

TestReportMode= FullReport    # Possible values are: 

                              # 'Summary', 'Environment', 'TestCases' or 'FullReport'

CreateTestReport= YES         # Possible values: YES or NO

TestReportFilePath= C:\LOGS\TestFramework\

TestReportFileName= TestReport

TestReportFormat= TXT         # Possible values: TXT or HTML

TestReportOutput= FILE        # Possible values: FILE or RDEBUG

TestReportFileCreationMode= OVERWRITE    # Possible values: OVERWRITE or APPEND

UITestingSupport= Yes

SeparateProcesses= YES

[End_Defaults]

# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

# Module configurations start

# Modules are added between module tags

# tags. Module name is specified after ModuleName= tag, like

# ModuleName= testplatalfvisualtestplatalfvisualtestplatalfvisual

# Modules might have initialisation file, specified as

# IniFile= YYYYYY

# Modules might have several configuration files, like

# TestCaseFile= NormalCases.txt

# TestCaseFile= SmokeCases.txt

# TestCaseFile= ManualCases.txt

# (TestCaseFile is synonym for old term ConfigFile)

# Following case specifies demo module settings. Demo module

# does not read any settings from file, so tags 

# IniFile and TestCaseFile are not used.

# In the simplest case it is enough to specify only the

# name of the test module when adding new test module

[New_Module]

ModuleName= testcombiner

TestCaseFile= c:\testframework\tctestplatalfvisualvisual.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualanchorlayout.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualvisualfactory.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualbatchbuffer.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualborderbrush.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualcontrol.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualcontrolgroup.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualviewportlayout.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualutil.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualtransformation.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualtimedvalue.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualtextvisual.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualtextureprocessor.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualtexturegroup.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualtexturemanager.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualstatic.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualsymbiansbdrawer.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualtextstylemanager.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualtextstyle.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualtexture.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualtextureautosizeparams.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualshadowborderbrush.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualpropertyowner.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualroster.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualscreenbuffer.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualscrollerevent.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualcurvepath.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualcurvepathlayout.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualdecklayout.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualdisplay.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualdisplaybackgrounditem.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualdropsshadow.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualdropsshadowbrush.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualenv.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualevent.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualflowlayout.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualframebrush.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualgencomponent.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualimage.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualgradientbrush.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualgridlayout.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualimagebrush.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualimageloaderutil.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualimagevisual.cfg

TestCaseFile= c:\testframework\tctestplatalfvisuallayout.cfg

TestCaseFile= c:\testframework\tctestplatalfvisuallinevisual.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualmeshvisual.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualm3gmesh.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualmapfunc.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualmaterial.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualmesh.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualmetric.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualproceduralmesh.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualcommand.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualbrush.cfg

TestCaseFile= c:\testframework\tctestplatalfvisualbrusharray.cfg

[End_Module]

# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

#Load testmoduletestplatalfvisual, optionally with initialization file and/or test case files

#[New_Module]

#ModuleName= testmodulexxx

#TestModuletestplatalfvisual used initialization file

#IniFile= init.txt

#TestModuletestplatalfvisual used configuration file(s)

#TestCaseFile= testcases1.cfg

#TestCaseFile= testcases2.cfg

#TestCaseFile= manualtestcases.cfg

#[End_Module]

# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

# Set STIFTestFramework logging overwrite parameters for Logger.

# Hardware and emulator environment logging path and styles can

# be configured from here to overwrite the Logger's implemented values.

#   

# Settings description:

# - Indicates option for creation log directory/directories. If log directory/directories

#       is/are not created by user they will make by software.

#     + YES, Create log directory/directories if not allready exist.

#     + NO, Log directory/directories not created. Only created one is used.

#

# - Overwrite emulator path setting.

#     + Example: If 'EmulatorBasePath= C:\LOGS\TestFramework\' and in code is defined 

#       Logger's path 'D:\\LOGS\\Module\\' with those definition the path

#       will be 'C:\LOGS\TestFramework\LOGS\Module\'

#

# - Overwrite emulator's logging format.

#     + TXT, Log file(s) will be txt type(s), for example 'Module.txt'.

#     + HTML, Log file(s) will be html type(s), for example 'Module.html'.

#

# - Overwrited emulator logging output source.

#     + FILE, Logging to file(s).

#     + RDEBUG, Logging to using rdebug(s).

#

# - Overwrite hardware path setting (Same description as above in emulator path).

# - Overwrite hardware's logging format(Same description as above in emulator format).

# - Overwrite hardware's logging output source(Same description as above in emulator output).

#

# - File Creation Mode indicates file overwriting if file exist.

#     + OVERWRITE, Overwrites if file(s) exist.

#     + APPEND, Continue logging after the old logging information if file(s) exist.

#

# - Will thread id include to the log filename.

#     + YES, Thread id to log file(s) name, Example filename 'Module_b9.txt'.

#     + NO, No thread id to log file(s), Example filename 'Module.txt'.

#

# - Will time stamps include the to log file.

#     + YES, Time stamp added to each line in log file(s). Time stamp is 

#       for example'12.Nov.2003 115958 LOGGING INFO'

#     + NO, No time stamp(s).

#

# - Will line breaks include to the log file.

#     + YES, Each logging event includes line break and next log event is in own line.

#     + NO, No line break(s).

#

# - Will event ranking include to the log file.

#     + YES, Event ranking number added to each line in log file(s). Ranking number 

#       depends on environment's tics, for example(includes time stamp also)

#       '012   12.Nov.2003 115958    LOGGING INFO'

#     + NO, No event ranking.

#

[Logger_Defaults]

#NOTE: If you want to set Logger using next setting(s) remove comment(s)'#' 

CreateLogDirectories= YES    # Possible values: YES or NO

EmulatorBasePath= C:\LOGS\TestFramework\

EmulatorFormat= HTML         # Possible values: TXT or HTML

EmulatorOutput= FILE         # Possible values: FILE or RDEBUG

#HardwareBasePath= D:\LOGS\TestFramework\

#HardwareFormat= HTML        # Possible values: TXT or HTML

#HardwareOutput= FILE        # Possible values: FILE or RDEBUG

FileCreationMode= OVERWRITE  # Possible values: OVERWRITE or APPEND

#ThreadIdToLogFile= YES      # Possible values: YES or NO

#WithTimeStamp= YES          # Possible values: YES or NO

#WithLineBreak= YES          # Possible values: YES or NO

#WithEventRanking= YES       # Possible values: YES or NO

[End_Logger_Defaults]

# -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

# End of file