/*

* All rights reserved.

* This component and the accompanying materials are made available

* under the terms of "Eclipse Public License v1.0"

* which accompanies this distribution, and is available

* at the URL "http://www.eclipse.org/legal/epl-v10.html".

*

* Initial Contributors:

* Nokia Corporation - initial contribution.

*

* Contributors:

*

* Description:  usbdevcon state machine

*

*/

#include "cusbdevcon.h"

#include "cstatemachine.h"

#include "cep0reader.h"

#include "cep0writer.h"

#include "crequestshandler.h"

#include "debug.h"

const TUint KOneByte = 8; // for shifting data to one byte

// binary constant for checking if bit 7 is set

const TUint KUsbDevConBit7 = 0x80;

const TUint KLengthLoByte = 6;

const TUint KLengthHiByte = 7;

// ---------------------------------------------------------------------------

// Two-phase construction

// ---------------------------------------------------------------------------

//

CStateMachine* CStateMachine::NewL(CRequestsHandler& aRequestsHandler, RDevUsbcClient& iLdd)

    {

    FLOG( _L( "[USBDEVCON]\tCStateMachine::NewL" ) );

    CStateMachine* self = new (ELeave) CStateMachine(aRequestsHandler, iLdd);

    CleanupStack::PushL(self);

    self->ConstructL();

    CleanupStack::Pop(self);

    return self;    

    }

// ---------------------------------------------------------------------------

// Two-phase constructon

// ---------------------------------------------------------------------------

//

void CStateMachine::ConstructL()

    {

    FLOG( _L( "[USBDEVCON]\tCStateMachine::ConstructL" ) );

    iBuffer.CreateL(0); // later will be reallocated with required size

    // reader

    iEP0Reader = CEP0Reader::NewL(*this,iLdd);

    // writer

    iEP0Writer = CEP0Writer::NewL(*this, iLdd);

    }

// ---------------------------------------------------------------------------

// Default construction

// ---------------------------------------------------------------------------

//

CStateMachine::CStateMachine(CRequestsHandler& aRequestsHandler, RDevUsbcClient& aLdd) : 

                            iRequestsHandler(aRequestsHandler),

                            iLdd (aLdd),

                            iState(ENoneState)

    {

    }

// ---------------------------------------------------------------------------

// Destruction

// ---------------------------------------------------------------------------

//

CStateMachine::~CStateMachine()

    {

    delete iEP0Writer;

    delete iEP0Reader;

    iBuffer.Close();    

    }   

// ---------------------------------------------------------------------------

// Starts state machine

// ---------------------------------------------------------------------------

//

    {

    FLOG( _L( "[USBDEVCON]\tCStateMachine::Start" ) );

    // resetting, if it's been already started

    if(IsStarted())

        {

        Stop();

        }

    iState = ESetupStage;   

    }

// ---------------------------------------------------------------------------

// Stops machine

// ---------------------------------------------------------------------------

//

void CStateMachine::Stop()

    {

    FLOG( _L( "[USBDEVCON]\tCStateMachine::Stop" ) );

    iEP0Reader->Cancel();

    iEP0Writer->Cancel();

    iState = ENoneState;

    }

// ---------------------------------------------------------------------------

// ETrue if state machine is started

// ---------------------------------------------------------------------------

//

TInt CStateMachine::IsStarted() const

    {

    if(ENoneState == iState)

        {

        FLOG( _L( "[USBDEVCON]\tCStateMachine::IsStarted == EFalse" ) );

        return EFalse;

        }

        else

        {

        FLOG( _L( "[USBDEVCON]\tCStateMachine::IsStarted == ETrue" ) );

        }

    return ETrue;

    }

// ---------------------------------------------------------------------------

// Something has been read from EP0 

// ---------------------------------------------------------------------------

//

    {

    FTRACE(FPrint(

            _L("[USBDEVCON]\tCStateMachine::ReadEP0: BufferLength = %d, aStatus = %d" ),aBuffer.Length(), aStatus.Int()));

    // all errors while reading data lead to idle state (ESetupStage in our case)

    if(KErrNone != aStatus.Int())

        {

        // restart

        return;

        }

    TInt err(KErrNone);

    switch(iState)

        {

        case ESetupStage: // setup transaction received

            {

            FLOG( _L( "[USBDEVCON]\tCStateMachine::ReadEP0 processing ESetupStage" ) );

            if(aBuffer.Length() != KSetupPacketLength) // SetupPacket is always 8 bytes

                {

                return;

                }

            break;

            }

        case EDataStage:  // some data received from host. This data is required for the request, received on setup stage

            {

            FLOG( _L( "[USBDEVCON]\tCStateMachine::ReadEP0 processing EDataStage" ) );

            // handle request, providing data together with request descriptor

            // iBuffer == request, aBuffer == data from host

            err = iRequestsHandler.Handle(iBuffer, aBuffer);

            if(KErrNone != err) // some error happened while handling request

                {

                iLdd.EndpointZeroRequestError(); // stall EP0

                }

                else

                {

                // send Status Packet, indicating that we received request, data, and handled request. OK

                iLdd.SendEp0StatusPacket();

                }

            // all done, go to idle state

            iState = ESetupStage;

            break;

            }

        default:

            {

            FLOG( _L( "[USBDEVCON]\tCStateMachine::ReadEP0 processing ***NOT_DEFINED state***" ) );

            }

        }

    }

// ---------------------------------------------------------------------------

// Processing setup packet 

// ---------------------------------------------------------------------------

//

    {

    FLOG( _L( "[USBDEVCON]\tCStateMachine::ProcessSetupPacket" ) );

    TUint datalength(0); // data length, to be received from host

    if(IsDataFromHostRequired(aSetupPacket, datalength)) // then goes to data stage

        {

        FTRACE(FPrint(

            _L("[USBDEVCON]\tCStateMachine::ProcessSetupPacket. Data from host is required: %d bytes" ),datalength));

        // save request, until receiving following data

        iBuffer.Close();

        // switch to Data state

        iState = EDataStage;

        return;

        }

    TInt err(KErrNone); 

    // Handle request. It does not require data from host   

    // aSetupPacket == request, iBuffer = result of the request

    err = iRequestsHandler.Handle(aSetupPacket, iBuffer);

    if(KErrNone != err) // some error happened while handling request

        {

        FTRACE(FPrint(

            _L("[USBDEVCON]\tCStateMachine::ProcessSetupPacket. Error while handling request, errcode: %d" ), err));

        iLdd.EndpointZeroRequestError(); // stall EP0

        // listen to EP0

        iState = ESetupStage;

        return;

        }

    // send response, size of datalength

    if(IsDataFromDeviceRequired(aSetupPacket, datalength))

        {

        FTRACE(FPrint(

          _L("[USBDEVCON]\tCStateMachine::ProcessSetupPacket. Data from device is required: %d bytes" ),datalength));

        iState = EStatusStage;

        return;

        }

    // status stage 

    iLdd.SendEp0StatusPacket();

    // all is done, listen to EP0, in setup stage

    iState = ESetupStage;

    }

// ---------------------------------------------------------------------------

// Something has been written to EP0 

// ---------------------------------------------------------------------------

//

    {

    FTRACE(FPrint(

            _L("[USBDEVCON]\tCStateMachine::WroteEP0: iStatus = %d" ), aStatus.Int()));

    // all errors while writing data lead to idle state (ESetupStage in our case)

    if(KErrNone != aStatus.Int())

        {

        // restart

        }

    switch(iState)

        {

        case EStatusStage:

            {

            FLOG( _L( "[USBDEVCON]\tCStateMachine::WroteEP0 EStatusStage -> ESetupStage" ) );

            // successfully wrote data to EP0

            // go to idle

            iState = ESetupStage;

            break;

            }

        default:

            {

            FLOG( _L( "[USBDEVCON]\tCStateMachine::WroteEP0 ***ENoneState***" ) );

            }

        }

    }

// ---------------------------------------------------------------------------

// ETrue if data required to be send from host 

// ---------------------------------------------------------------------------

//

TBool CStateMachine::IsDataFromHostRequired(const RBuf8& aSetupPacket, TUint& aDataLength) const

    {

        // bits 6 and 7 of SetupPacket contain wLength - length of data in Data stage  

        aDataLength = static_cast<TUint16>(aSetupPacket[KLengthLoByte] |

                                            (aSetupPacket[KLengthHiByte] << KOneByte));

        if(0 == aDataLength)

            {

            // no data required in any direction

            return EFalse;

            }

        // direction of data

        // bit 7 of byte 0 of aSetupPacket (means bmRequestType one) contains:

        // 0, if no data or data goes from host to device

        // 1 means data goes from device to host

        if(KUsbDevConBit7 & aSetupPacket[0])

            { // bit 7 is set => data flow is from device to host

            return EFalse;

            }

        return ETrue;

    }

// ---------------------------------------------------------------------------

// ETrue if data required to be send to host

// ---------------------------------------------------------------------------

//

TBool CStateMachine::IsDataFromDeviceRequired(const RBuf8& aSetupPacket, TUint& aDataLength) const

    {

        // bytes 6 and 7 of SetupPacket contain wLength - length of data in Data stage

        aDataLength = static_cast<TUint16>(aSetupPacket[KLengthLoByte] |

                                            (aSetupPacket[KLengthHiByte] << KOneByte));

        if(0 == aDataLength)

            {

            // no data required in any direction

            return EFalse;

            }

        // direction of data

        // bit 7 of byte 0 of aSetupPacket (means bmRequestType one) contains:

        // 0, if no data or data goes from host to device

        // 1 means data goes from device to host

        if(KUsbDevConBit7 & aSetupPacket[0])

            { // bit 7 is set => data flow is from device to host

            return ETrue;

            }

        return EFalse;

    }