//

// Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

//

LOAD_SUITE	T_mmcsd

START_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0001

//! @SYMTestCaseID		BASE-BSP-SD-DRIVER-DMMCPsuBase-0001

//! @SYMTestCaseDesc		Load MMC/SD Logical Device Driver

//! @SYMTestPriority		high

//! @SYMTestActions		Load  D_MMCSDIF LDD Driver

//! @SYMTestExpectedResults	KErrNone

//! @SYMTestType		CIT

//! @SYMCreationDate		15/07/2008

//! @SYMAuthor		Saravanakumar

//! @SYMTestStatus		Implemented

//! @SYMAPI			User::LoadLogicalDevice(const TDesC {ref});

	START_TEST_BLOCK	100		T_mmcsd			\base\mmcsd\BASE-BSP-SD-PSUBASE-DRIVER.ini

		CREATE_OBJECT	MMCSDSession	mmcsdsession1

		COMMAND		mmcsdsession1	NewL

		COMMAND		mmcsdsession1	LoadDriver		BASE-BSP-SD-DRIVER-LDDName-CMD0001

		COMMAND		mmcsdsession1	~

	END_TEST_BLOCK

END_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0001

START_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0002

//! @SYMTestCaseID		BASE-BSP-SD-DRIVER-DMMCPsuBase-0002

//! @SYMTestCaseDesc		Checks whether this PSU is powering a bus containing a locked device,

//!				i.e. one that is recognised and in use by a client

//! @SYMTestPriority		high

//! @SYMTestActions		1. Create  RMMCSDTestControllerInterface Handle object.

//!				2. Load the Driver

//!				3. Open the driver connection

//!				4. Reads the power bus locked flag

//!				5. Display the power bus locked counter value

//!				6. Close the driver connection

//!				7. Destroy the object

//! @SYMTestExpectedResults	Displayed the power bus locked counter value (TRUE or FALSE)

//! @SYMTestType		CIT

//! @SYMCreationDate		15/07/2008

//! @SYMAuthor			Saravanakumar

//! @SYMTestStatus		Implemented

//! @SYMAPI			DPBusPsuBase::IsLocked();

	START_TEST_BLOCK	100		T_mmcsd			\base\mmcsd\BASE-BSP-SD-PSUBASE-DRIVER.ini

		CREATE_OBJECT	MMCSDSession	mmcsdsession1

		CREATE_OBJECT	MMCSDPsuBase	mmcsdpsubase1

		COMMAND		mmcsdsession1	NewL

		COMMAND		mmcsdsession1	DriverOpen		BASE-BSP-SD-DRIVER-StackNumber

		COMMAND		mmcsdpsubase1	NewL			BASE-BSP-SD-DRIVER-SessionWrapperName

		COMMAND		mmcsdpsubase1	IsLocked		BASE-BSP-SD-DRIVER-IsLocked-CMD002

		COMMAND		mmcsdsession1	Close

		COMMAND		mmcsdpsubase1	~

		COMMAND		mmcsdsession1	~

	END_TEST_BLOCK

END_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0002

START_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0003

//! @SYMTestCaseID		BASE-BSP-SD-DRIVER-DMMCPsuBase-0003

//! @SYMTestCaseDesc		Checks whether the PSU is off.

//!				The PSU is off when it is in the EPsuOff state

//! @SYMTestPriority		high

//! @SYMTestActions		1. Create  RMMCSDTestControllerInterface Handle object.

//!				2. Load the Driver

//!				3. Open the driver connection

//!				4. Reads the Psu State flag

//!				5. Display the PSU State

//!				6. Close the driver connection

//!				7. Destroy the object

//! @SYMTestExpectedResults	Displayed the  PSU State value (TRUE or FALSE)

//! @SYMTestType		CIT

//! @SYMCreationDate		15/07/2008

//! @SYMAuthor			Saravanakumar

//! @SYMTestStatus		Implemented

//! @SYMAPI			DPBusPsuBase::IsOff();

	START_TEST_BLOCK	100		T_mmcsd			\base\mmcsd\BASE-BSP-SD-PSUBASE-DRIVER.ini

		CREATE_OBJECT	MMCSDSession	mmcsdsession1

		CREATE_OBJECT	MMCSDPsuBase	mmcsdpsubase1

		COMMAND		mmcsdsession1	NewL

		COMMAND		mmcsdsession1	DriverOpen		BASE-BSP-SD-DRIVER-StackNumber

		COMMAND		mmcsdpsubase1	NewL			BASE-BSP-SD-DRIVER-SessionWrapperName

		COMMAND		mmcsdpsubase1	IsOff			BASE-BSP-SD-DRIVER-IsOff-CMD003

		COMMAND		mmcsdsession1	Close

		COMMAND		mmcsdpsubase1	~

		COMMAND		mmcsdsession1	~

	END_TEST_BLOCK

END_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0003

START_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0004

//! @SYMTestCaseID		BASE-BSP-SD-DRIVER-DMMCPsuBase-0004

//! @SYMTestCaseDesc		Gets the maximum current (in microAmps) that the PSU is able to supply

//! @SYMTestPriority		high

//! @SYMTestActions		1. Create  RMMCSDTestControllerInterface Handle object.

//!				2. Load the Driver

//!				3. Open the driver connection

//!				4. Reads maximum current (in microAmps)

//!				5. Display the maximum current that the PSU is able to supply

//!				6. Close the driver connection

//!				7. Destroy the object

//! @SYMTestExpectedResults	Displayed the  maximum current (in microAmps)

//! @SYMTestType		CIT

//! @SYMCreationDate		15/07/2008

//! @SYMAuthor			Saravanakumar

//! @SYMTestStatus		Implemented

//! @SYMAPI			DPBusPsuBase::MaxCurrentInMicroAmps();

	START_TEST_BLOCK	100		T_mmcsd			\base\mmcsd\BASE-BSP-SD-PSUBASE-DRIVER.ini

		CREATE_OBJECT	MMCSDSession	mmcsdsession1

		CREATE_OBJECT	MMCSDPsuBase	mmcsdpsubase1

		COMMAND		mmcsdsession1	NewL

		COMMAND		mmcsdsession1	DriverOpen		BASE-BSP-SD-DRIVER-StackNumber

		COMMAND		mmcsdpsubase1	NewL			BASE-BSP-SD-DRIVER-SessionWrapperName

		COMMAND		mmcsdpsubase1	MaxCurrentInMicroAmps	BASE-BSP-SD-DRIVER-MaxCurrentInMicroAmps-CMD004

		COMMAND		mmcsdsession1	Close

		COMMAND		mmcsdpsubase1	~

		COMMAND		mmcsdsession1	~

	END_TEST_BLOCK

END_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0004

START_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0005

//! @SYMTestCaseID		BASE-BSP-SD-DRIVER-DMMCPsuBase-0005

//! @SYMTestCaseDesc		Resets inactivity and not-locked counts

//! @SYMTestPriority		high

//! @SYMTestActions		1. Create  RMMCSDTestControllerInterface Handle object.

//!				2. Load the Driver

//!				3. Open the driver connection

//!				4. Resets inactivity and not-locked counts

//!				5. Display the inactivity and not-locked counter values

//!				6. Close the driver connection

//!				7. Destroy the object

//! @SYMTestExpectedResults	Displayed the  inactivity and not-locked counter values

//! @SYMTestType		CIT

//! @SYMCreationDate		15/07/2008

//! @SYMAuthor		Saravanakumar

//! @SYMTestStatus		Implemented

//! @SYMAPI			DPBusPsuBase::ResetInactivityTimer();

//!				DPBusPsuBase::iInactivityCount();

//!				DPBusPsuBase::iNotLockedCount();

	START_TEST_BLOCK	100		T_mmcsd			\base\mmcsd\BASE-BSP-SD-PSUBASE-DRIVER.ini

		CREATE_OBJECT	MMCSDSession	mmcsdsession1

		CREATE_OBJECT	MMCSDPsuBase	mmcsdpsubase1

		COMMAND		mmcsdsession1	NewL

		COMMAND		mmcsdsession1	DriverOpen		BASE-BSP-SD-DRIVER-StackNumber

		COMMAND		mmcsdpsubase1	NewL			BASE-BSP-SD-DRIVER-SessionWrapperName

		COMMAND		mmcsdpsubase1	ResetInactivityTimer

		COMMAND		mmcsdpsubase1	InactivityCount		BASE-BSP-SD-DRIVER-InactivityCount-CMD005

		COMMAND		mmcsdpsubase1	NotLockedCount		BASE-BSP-SD-DRIVER-NotLockedCount-CMD005

		COMMAND		mmcsdsession1	Close

		COMMAND		mmcsdpsubase1	~

		COMMAND		mmcsdsession1	~

	END_TEST_BLOCK

END_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0005

START_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0006

//! @SYMTestCaseID		BASE-BSP-SD-DRIVER-DMMCPsuBase-0006

//! @SYMTestCaseDesc		Gets the voltage level, or range of supported voltage levels

//! @SYMTestPriority		high

//! @SYMTestActions		1. Create  RMMCSDTestControllerInterface Handle object.

//!				2. Load the Driver

//!				3. Open the driver connection

//!				4. Reads the voltage level, or range of supported voltage levels

//!				5. Display the voltage in OCR format

//!				6. Close the driver connection

//!				7. Destroy the object

//! @SYMTestExpectedResults	Displayed the voltage in OCR format

//! @SYMTestType		CIT

//! @SYMCreationDate		15/07/2008

//! @SYMAuthor			Saravanakumar

//! @SYMTestStatus		Implemented

//! @SYMAPI			DPBusPsuBase::VoltageSupported();

	START_TEST_BLOCK	100		T_mmcsd			\base\mmcsd\BASE-BSP-SD-PSUBASE-DRIVER.ini

		CREATE_OBJECT	MMCSDSession	mmcsdsession1

		CREATE_OBJECT	MMCSDPsuBase	mmcsdpsubase1

		COMMAND		mmcsdsession1	NewL

		COMMAND		mmcsdsession1	DriverOpen		BASE-BSP-SD-DRIVER-StackNumber

		COMMAND		mmcsdpsubase1	NewL			BASE-BSP-SD-DRIVER-SessionWrapperName

		COMMAND		mmcsdpsubase1	VoltageSupported	BASE-BSP-SD-DRIVER-VoltageSupported-CMD006

		COMMAND		mmcsdsession1	Close

		COMMAND		mmcsdpsubase1	~

		COMMAND		mmcsdsession1	~

	END_TEST_BLOCK

END_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0006

START_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0007

//! @SYMTestCaseID		BASE-BSP-SD-DRIVER-DMMCPsuBase-0007

//! @SYMTestCaseDesc		Reads the Bus inactivity counter value

//! @SYMTestPriority		high

//! @SYMTestActions		1. Create  RMMCSDTestControllerInterface Handle object.

//!				2. Load the Driver

//!				3. Open the driver connection

//!				4. Reads the Bus inactivity counter.

//!				5. Display the Bus inactivity counter.

//!				6. Close the driver connection

//!				7. Destroy the object

//! @SYMTestExpectedResults	Displayed Bus inactivity counter

//! @SYMTestType		CIT

//! @SYMCreationDate		15/07/2008

//! @SYMAuthor		Saravanakumar

//! @SYMTestStatus		Implemented

//! @SYMAPI			DPBusPsuBase::iInactivityCount();

	START_TEST_BLOCK	100		T_mmcsd			\base\mmcsd\BASE-BSP-SD-PSUBASE-DRIVER.ini

		CREATE_OBJECT	MMCSDSession	mmcsdsession1

		CREATE_OBJECT	MMCSDPsuBase	mmcsdpsubase1

		COMMAND		mmcsdsession1	NewL

		COMMAND		mmcsdsession1	DriverOpen		BASE-BSP-SD-DRIVER-StackNumber

		COMMAND		mmcsdpsubase1	NewL			BASE-BSP-SD-DRIVER-SessionWrapperName

		COMMAND		mmcsdpsubase1	InactivityCount		BASE-BSP-SD-DRIVER-InactivityCount-CMD007

		COMMAND		mmcsdsession1	Close

		COMMAND		mmcsdpsubase1	~

		COMMAND		mmcsdsession1	~

	END_TEST_BLOCK

END_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0007

START_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0008

//! @SYMTestCaseID		BASE-BSP-SD-DRIVER-DMMCPsuBase-0008

//! @SYMTestCaseDesc		Reads Bus not locked counter

//! @SYMTestPriority		high

//! @SYMTestActions		1. Create  RMMCSDTestControllerInterface Handle object.

//!				2. Load the Driver

//!				3. Open the driver connection

//!				4. Reads the BBus not locked counter.

//!				5. Display the Bus not locked counter.

//!				6. Close the driver connection

//!				7. Destroy the object

//! @SYMTestExpectedResults	Displayed Bus not locked counter value

//! @SYMTestType		CIT

//! @SYMCreationDate		15/07/2008

//! @SYMAuthor			Saravanakumar

//! @SYMTestStatus		Implemented

//! @SYMAPI			DPBusPsuBase::iInactivityCount();

	START_TEST_BLOCK	100		T_mmcsd			\base\mmcsd\BASE-BSP-SD-PSUBASE-DRIVER.ini

		CREATE_OBJECT	MMCSDSession	mmcsdsession1

		CREATE_OBJECT	MMCSDPsuBase	mmcsdpsubase1

		COMMAND		mmcsdsession1	NewL

		COMMAND		mmcsdsession1	DriverOpen		BASE-BSP-SD-DRIVER-StackNumber

		COMMAND		mmcsdpsubase1	NewL			BASE-BSP-SD-DRIVER-SessionWrapperName

		COMMAND		mmcsdpsubase1	NotLockedCount		BASE-BSP-SD-DRIVER-NotLockedCount-CMD008

		COMMAND		mmcsdsession1	Close

		COMMAND		mmcsdpsubase1	~

		COMMAND		mmcsdsession1	~

	END_TEST_BLOCK

END_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0008

START_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0009

//! @SYMTestCaseID		BASE-BSP-SD-DRIVER-DMMCPsuBase-0009

//! @SYMTestCaseDesc		Reads Bus inactivity timeout period, in seconds, when clients are registered

//! @SYMTestPriority		high

//! @SYMTestActions		1. Create  RMMCSDTestControllerInterface Handle object.

//!				2. Load the Driver

//!				3. Open the driver connection

//!				4. Reads the Bus inactivity timeout counter.

//!				5. Display the inactivity timeout counter.

//!				6. Close the driver connection

//!				7. Destroy the object

//! @SYMTestExpectedResults	Displayed inactivity timeout counter value

//! @SYMTestType		CIT

//! @SYMCreationDate		15/07/2008

//! @SYMAuthor			Saravanakumar

//! @SYMTestStatus		Implemented

//! @SYMAPI			DPBusPsuBase::iInactivityTimeout();

	START_TEST_BLOCK	100		T_mmcsd			\base\mmcsd\BASE-BSP-SD-PSUBASE-DRIVER.ini

		CREATE_OBJECT	MMCSDSession	mmcsdsession1

		CREATE_OBJECT	MMCSDPsuBase	mmcsdpsubase1

		COMMAND		mmcsdsession1	NewL

		COMMAND		mmcsdsession1	DriverOpen		BASE-BSP-SD-DRIVER-StackNumber

		COMMAND		mmcsdpsubase1	NewL			BASE-BSP-SD-DRIVER-SessionWrapperName

		COMMAND		mmcsdpsubase1	InactivityTimeout	BASE-BSP-SD-DRIVER-InactivityTimeout-CMD009

		COMMAND		mmcsdsession1	Close

		COMMAND		mmcsdpsubase1	~

		COMMAND		mmcsdsession1	~

	END_TEST_BLOCK

END_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0009

START_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0010

//! @SYMTestCaseID		BASE-BSP-SD-DRIVER-DMMCPsuBase-0010

//! @SYMTestCaseDesc		Reads Bus not locked timeout period, in seconds, when no clients are registered

//! @SYMTestPriority		high

//! @SYMTestActions		1. Create  RMMCSDTestControllerInterface Handle object.

//!				2. Load the Driver

//!				3. Open the driver connection

//!				4. Reads the not locked timeout counter.

//!				5. Display the not locked timeout counter.

//!				6. Close the driver connection

//!				7. Destroy the object

//! @SYMTestExpectedResults	Displayed not locked timeout counter value

//! @SYMTestType		CIT

//! @SYMCreationDate		15/07/2008

//! @SYMAuthor			Saravanakumar

//! @SYMTestStatus		Implemented

//! @SYMAPI			DPBusPsuBase::iNotLockedTimeout();

	START_TEST_BLOCK	100		T_mmcsd			\base\mmcsd\BASE-BSP-SD-PSUBASE-DRIVER.ini

		CREATE_OBJECT	MMCSDSession	mmcsdsession1

		CREATE_OBJECT	MMCSDPsuBase	mmcsdpsubase1

		COMMAND		mmcsdsession1	NewL

		COMMAND		mmcsdsession1	DriverOpen		BASE-BSP-SD-DRIVER-StackNumber

		COMMAND		mmcsdpsubase1	NewL			BASE-BSP-SD-DRIVER-SessionWrapperName

		COMMAND		mmcsdpsubase1	NotLockedTimeout	BASE-BSP-SD-DRIVER-NotLockedTimeout-CMD010

		COMMAND		mmcsdsession1	Close

		COMMAND		mmcsdpsubase1	~

		COMMAND		mmcsdsession1	~

	END_TEST_BLOCK

END_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0010

START_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0011

//! @SYMTestCaseID		BASE-BSP-SD-DRIVER-DMMCPsuBase-0011

//! @SYMTestCaseDesc		Reads the voltage level, or range of voltages supported .

//!				The voltage level, or range of voltages is reported as a

//!				bit mask in the same format as defined for the OCR register.

//! @SYMTestPriority		high

//! @SYMTestActions		1. Create  RMMCSDTestControllerInterface Handle object.

//!				2. Load the Driver

//!				3. Open the driver connection

//!				4. Reads the voltage level in OCR format.

//!				5. Display the voltage level in OCR format.

//!				6. Close the driver connection

//!				7. Destroy the object

//! @SYMTestExpectedResults	Displayed voltage level in OCR format

//! @SYMTestType		CIT

//! @SYMCreationDate		15/07/2008

//! @SYMAuthor			Saravanakumar

//! @SYMTestStatus		Implemented

//! @SYMAPI			DPBusPsuBase::iVoltageSupported();

	START_TEST_BLOCK	100		T_mmcsd			\base\mmcsd\BASE-BSP-SD-PSUBASE-DRIVER.ini

		CREATE_OBJECT	MMCSDSession	mmcsdsession1

		CREATE_OBJECT	MMCSDPsuBase	mmcsdpsubase1

		COMMAND		mmcsdsession1	NewL

		COMMAND		mmcsdsession1	DriverOpen		BASE-BSP-SD-DRIVER-StackNumber

		COMMAND		mmcsdpsubase1	NewL			BASE-BSP-SD-DRIVER-SessionWrapperName

		COMMAND		mmcsdpsubase1	MemVoltageSupported	BASE-BSP-SD-DRIVER-MemVoltageSupported-CMD011

		COMMAND		mmcsdsession1	Close

		COMMAND		mmcsdpsubase1	~

		COMMAND		mmcsdsession1	~

	END_TEST_BLOCK

END_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0011

START_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0012

//! @SYMTestCaseID		BASE-BSP-SD-DRIVER-DMMCPsuBase-0012

//! @SYMTestCaseDesc		The maximum current (in microAmps) that the PSU is able to supply

//! @SYMTestPriority		high

//! @SYMTestActions		1. Create  RMMCSDTestControllerInterface Handle object.

//!				2. Load the Driver

//!				3. Open the driver connection

//!				4. Reads the maximum current (in microAmps).

//!				5. Display the maximum current (in microAmps).

//!				6. Close the driver connection

//!				7. Destroy the object

//! @SYMTestExpectedResults	Displayed maximum current (in microAmps)

//! @SYMTestType		CIT

//! @SYMCreationDate		15/07/2008

//! @SYMAuthor			Saravanakumar

//! @SYMTestStatus		Implemented

//! @SYMAPI			DPBusPsuBase::iMaxCurrentInMicroAmps();

	START_TEST_BLOCK	100		T_mmcsd				\base\mmcsd\BASE-BSP-SD-PSUBASE-DRIVER.ini

		CREATE_OBJECT	MMCSDSession	mmcsdsession1

		CREATE_OBJECT	MMCSDPsuBase	mmcsdpsubase1

		COMMAND		mmcsdsession1	NewL

		COMMAND		mmcsdsession1	DriverOpen		BASE-BSP-SD-DRIVER-StackNumber

		COMMAND		mmcsdpsubase1	NewL			BASE-BSP-SD-DRIVER-SessionWrapperName

		COMMAND		mmcsdpsubase1	MemMaxCurrentInMicroAmps	BASE-BSP-SD-DRIVER-MemMaxCurrentInMicroAmps-CMD012

		COMMAND		mmcsdsession1	Close

		COMMAND		mmcsdpsubase1	~

		COMMAND		mmcsdsession1	~

	END_TEST_BLOCK

END_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0012

START_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0013

//! @SYMTestCaseID		BASE-BSP-SD-DRIVER-DMMCPsuBase-0013

//! @SYMTestCaseDesc		Indicates whether the platform hardware has support for checking whether the voltage level of the

//!				PSU is within its expected voltage limit while turned on

//! @SYMTestPriority		high

//! @SYMTestActions		1. Create  RMMCSDTestControllerInterface Handle object.

//!				2. Load the Driver

//!				3. Open the driver connection

//!				4. Reads the Volt Check Interval.

//!				5. Display the Volt Check Interval.

//!				6. Close the driver connection

//!				7. Destroy the object

//! @SYMTestExpectedResults	Displayed Volt Check Interval value

//! @SYMTestType		CIT

//! @SYMCreationDate		15/07/2008

//! @SYMAuthor			Saravanakumar

//! @SYMTestStatus		Implemented

//! @SYMAPI			DPBusPsuBase::iVoltCheckInterval();

	START_TEST_BLOCK	100		T_mmcsd			\base\mmcsd\BASE-BSP-SD-PSUBASE-DRIVER.ini

		CREATE_OBJECT	MMCSDSession	mmcsdsession1

		CREATE_OBJECT	MMCSDPsuBase	mmcsdpsubase1

		COMMAND		mmcsdsession1	NewL

		COMMAND		mmcsdsession1	DriverOpen		BASE-BSP-SD-DRIVER-StackNumber

		COMMAND		mmcsdpsubase1	NewL			BASE-BSP-SD-DRIVER-SessionWrapperName

		COMMAND		mmcsdpsubase1	VoltCheckInterval	BASE-BSP-SD-DRIVER-VoltCheckInterval-CMD013

		COMMAND		mmcsdsession1	Close

		COMMAND		mmcsdpsubase1	~

		COMMAND		mmcsdsession1	~

	END_TEST_BLOCK

END_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0013

START_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0014

//! @SYMTestCaseID		BASE-BSP-SD-DRIVER-DMMCPsuBase-0014

//! @SYMTestCaseDesc		UnLoad MMC/SD Logical Device Driver.

//! @SYMTestPriority		high

//! @SYMTestActions		Load D_MMCSDIF LDD Driver

//! @SYMTestExpectedResults	KErrNone

//! @SYMTestType		CIT

//! @SYMCreationDate		1/4/2008

//! @SYMAuthor			Saravanakumar

//! @SYMTestStatus		Implemented

//! @SYMAPI			User::FreeLogicalDevice(const TDesC{ref});

	START_TEST_BLOCK 	100		T_mmcsd			\base\mmcsd\BASE-BSP-SD-PSUBASE-DRIVER.ini

		CREATE_OBJECT	MMCSDSession	mmcsdsession1

		COMMAND		mmcsdsession1	NewL

		COMMAND		mmcsdsession1	UnLoadDriver		BASE-BSP-SD-DRIVER-LDDName-CMD0001

		COMMAND		mmcsdsession1	~

	END_TEST_BLOCK

END_TESTCASE			BASE-BSP-SD-DRIVER-DMMCPsuBase-0014