# This is the global environment file to configure the MMC/SD on device specific

# The current default MMC/SD card values are configured for Devlon52 device.

# Licencees may need to configure below values to specific devices 

#Logical Device Driver developed to test MMC/SD controller 

[logicaldevice]

lddname			=D_MMCSDIF

[stack]

# Stack Number- Symbian Stack supports only Single cards at a time

stackno			=0

[cardinfo]

# Card Number

cardnumber		=0

[psuinfo]

# Power Supply information supported by the platform

# OCR from 3.1V to 3.2V (H4 voltage is 3.11V)

#voltage in OCR Register 32 Bit Format (Hexa Decimal)

supported_voltage	=0x00040000

#Current in MicroAmps

current			=0

#Voltage Interval

voltageinterval		=0

#Voltage Check

voltagecheck		=EDPsuChkComparator

#Inactivity count

inactivitycount		=0

#Notlockedcount

notlockedcount		=0

#Timeout for PowerDown in seconds

psuinactivitytimeOut	=4

#Bus not locked timeout period, in seconds

notlockedtimeOut	=0

#Lock State

lockstate		=EFalse

#Psu OFF

psuoff			=ETrue

[busstate]

cardbusstate		=EBusOff

[powersupply]

#power supply unit number ##Note## OMAP2420 Platform Not supported,Value is Reserved for other platforms

unit			=0

#Psu current Limit IsSafe?##Note## OMAP2420 Platform Not supported,Value is Reserved for other platforms

curlimit		=0

#power supply state

initvccstate		=EDPsuOff

[mediachange]

#Media Change Number ##Note## OMAP2420 Platform Not supported,Value is Reserved for other platforms

mcID			=0

[mediastate]

#Initial Media State

initialstate		=EClosed

#Force Media Change support

forcedstate		=EOpened

#Standbymode ON/OFF

standbymode 		=EFalse

#Replay Event Counts

eventcount		=0

#Bus type

bustype			=0

[bufferinfo]

#buflen

buflen			=69632

[machineinfo]

#machineinfo

expectedtotalsockets			=1

expectedtotalmediachanges		=0

expectedtotalprimarysupplies	=0

expectedbasebusnumber			=0

expectedspimode				=FALSE

hasflagsupportsspimode			=FALSE

hasflagsupportsdoublebuffering		=FALSE

hasflagsupportsr7			=FALSE

hasflagmaxtransferlength256k		=FALSE

hasflagmaxtransferlength512k		=FALSE

hasflagmaxtransferlength1m		=FALSE

hasflagmaxtransferlength2m		=FALSE

hasflagmaxtransferlength4m		=FALSE

hasflagmaxtransferlength8m		=FALSE

hasflagmaxtransferlength16m		=FALSE

hasflagdma8bitaddressing		=FALSE

hasflagdma16bitaddressing		=TRUE

hasflagdma32bitaddressing		=FALSE

hasflagdma64bitaddressing		=FALSE

hasflagsupportsdma			=TRUE

[partialreadinfo]

prdstart1				=0

prdend1					=512

expectedprdstart1			=0

expectedprdend1				=512

prdstart2				=0

prdend2					=4096

expectedprdstart2			=0

expectedprdend2				=512

prdstart3				=0

prdend3					=256

expectedprdstart3		=0

expectedprdend3			=512

prdstart4				=127

prdend4					=719

expectedprdstart4		=0

expectedprdend4			=512

[stacktests]

#stacktests

expectedasyncerror0004			=1

expectedstateoff			=EPBusOff

expectedstateon				=EPBusOn

[devinfo]

maxcards				=1

programperiodms				=1

[cardpdata]

transferspeed				=42

readcurrentinmilliamps 			=45