//

// Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

//

RUN_UTILS	MkDir	${SYSDRIVE}\bluetooth\

RUN_UTILS	MkDir	${SYSDRIVE}\bluetooth\tbtsockapi\

LOAD_SUITE	T_BTSockAPI

DELAY		2000

//! @file

//! @SYMTestSuiteName		BT-USER-SOCK-PublicApi-Unconnected

//! @SYMScriptTestEnvironment	This test script requires a basic ROM with bluetooth dongle.

// ****************************************************************************

// CBluetoothSocket

// **************************************************************************** 

// Service side unconnected tests

//Standard construction

START_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0001

//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Unconnected-0001

//! @SYMAPI			CBluetoothSocket

//! @SYMAuthor			Johan Eriksson

//! @SYMCreationDate		16/03/2006

//! @SYMTestCaseDesc		Create a CBluetoothSocket using the Standard Bluetooth socket NewL constructor.

//!				Uses API elements: NewL()1

//! @SYMTestActions    		1. Create and start a session on the socket server

//!				2. Call the first NewL of the CBluetoothSocket class

//!				3. Destroy object

//! @SYMTestStatus		Implemented

//! @SYMTestPriority		Critical

//! @SYMTestExpectedResults  	Object created successfully

//! @SYMTestType		CIT

	START_TEST_BLOCK	10	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Unconnected.ini

			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			COMMAND		CBluetoothSocket1	RSocketServerConnect

			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Unconnected-0001-0001command2NewL

			COMMAND		CBluetoothSocket1	~

			COMMAND		CBluetoothSocket1	RSocketServerClose

	END_TEST_BLOCK

END_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0001

//!START_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0002

//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Unconnected-0002

//! @SYMAPI			CBluetoothSocket

//! @SYMAuthor			Johan Eriksson

//! @SYMCreationDate		16/03/2006

//! @SYMTestCaseDesc		Create a CBluetoothSocket using the Standard Bluetooth socket NewL constructor, but with no session on the socket server

//!				Uses API elements: NewL()1

//! @SYMTestActions    		1. Call the first NewL of the CBluetoothSocket class without a session open on the socket server

//! @SYMTestStatus		Implemented

//! @SYMTestPriority		Critical

//! @SYMTestExpectedResults  	Leave, unable to create a socket

//! @SYMTestType		CIT

//!	START_TEST_BLOCK	10	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Unconnected.ini

//!			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

//!			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Unconnected-0002-0001command1NewL

//!			COMMAND		CBluetoothSocket1	~

//!	END_TEST_BLOCK	!PanicCode=0	!PanicString=KERN-EXEC

//!END_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0002

START_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0003

//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Unconnected-0003

//! @SYMAPI			CBluetoothSocket

//! @SYMAuthor			Johan Eriksson

//! @SYMCreationDate		16/03/2006

//! @SYMTestCaseDesc		Create a CBluetoothSocket using the Standard Bluetooth socket NewLC constructor.

//!				Uses API elements: NewLC()1

//! @SYMTestActions    		1. Create and start a session on the socket server

//!				2. Call the first NewLC of the CBluetoothSocket class

//!				3. Pop and destroy the CBluetoothSocket object from the cleanup stack	

//! @SYMTestStatus		Implemented

//! @SYMTestPriority		Critical

//! @SYMTestExpectedResults  	Object created successfully

//! @SYMTestType		CIT

	START_TEST_BLOCK	10	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Unconnected.ini

			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			COMMAND		CBluetoothSocket1	RSocketServerConnect

			COMMAND		CBluetoothSocket1	NewLC		BT-USER-SOCK-PublicAPI-Unconnected-0003-0001command2NewLC

			COMMAND		CBluetoothSocket1	~

			COMMAND		CBluetoothSocket1	RSocketServerClose

	END_TEST_BLOCK

END_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0003

//!START_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0004

//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Unconnected-0004

//! @SYMAPI			CBluetoothSocket

//! @SYMAuthor			Johan Eriksson

//! @SYMCreationDate		16/03/2006

//! @SYMTestCaseDesc		Create a CBluetoothSocket using the Standard Bluetooth socket NewLC constructor, but with no session on the socket server

//!				Uses API elements: NewLC()1

//! @SYMTestActions    		1. Call the first NewLC of the CBluetoothSocket class without a session open on the socket server

//! @SYMTestStatus		Implemented

//! @SYMTestPriority		Critical

//! @SYMTestExpectedResults  	Leave, unable to create a socket

//! @SYMTestType		CIT

//!	START_TEST_BLOCK	10	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Unconnected.ini

//!			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

//!			COMMAND		CBluetoothSocket1	NewLC		BT-USER-SOCK-PublicAPI-Unconnected-0004-0001command1NewLC

//!			COMMAND		CBluetoothSocket1	~

//!	END_TEST_BLOCK	!PanicCode=0	!PanicString=KERN-EXEC

//!END_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0004

//Constructor for Bluetooth blank socket, used for accepting incoming connections.

START_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0005

//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Unconnected-0005

//! @SYMAPI			CBluetoothSocket

//! @SYMAuthor			Johan Eriksson

//! @SYMCreationDate		16/03/2006

//! @SYMTestCaseDesc		Create a CBluetoothSocket with a blank socket, using NewL constructor.

//!				Uses API elements: NewL()4

//! @SYMTestActions    		1. Create and start a session on the socket server

//!				2. Call the fourth NewL of the CBluetoothSocket class

//!				3. Destroy object

//! @SYMTestStatus		Implemented

//! @SYMTestPriority		Critical

//! @SYMTestExpectedResults  	Object created successfully

//! @SYMTestType		CIT

	START_TEST_BLOCK	10	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Unconnected.ini

			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			COMMAND		CBluetoothSocket1	RSocketServerConnect

			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Unconnected-0005-0001command2NewL

			COMMAND		CBluetoothSocket1	~

			COMMAND		CBluetoothSocket1	RSocketServerClose

	END_TEST_BLOCK

END_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0005

//!START_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0006

//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Unconnected-0006

//! @SYMAPI			CBluetoothSocket

//! @SYMAuthor			Johan Eriksson

//! @SYMCreationDate		16/03/2006

//! @SYMTestCaseDesc		Create a CBluetoothSocket with a blank socket, but with no session on the socket server

//!				Uses API elements: NewL()4

//! @SYMTestActions    		1. Call the fourth NewL of the CBluetoothSocket class without a session open on the socket server

//! @SYMTestStatus		Implemented

//! @SYMTestPriority		Critical

//! @SYMTestExpectedResults  	Leave, unable to create a socket

//! @SYMTestType		CIT

//!	START_TEST_BLOCK	10	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Unconnected.ini

//!			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

//!			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Unconnected-0006-0001command1NewL

//!			COMMAND		CBluetoothSocket1	~

//!	END_TEST_BLOCK	!PanicCode=0	!PanicString=KERN-EXEC

//!END_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0006

START_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0007

//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Unconnected-0007

//! @SYMAPI			CBluetoothSocket

//! @SYMAuthor			Johan Eriksson

//! @SYMCreationDate		16/03/2006

//! @SYMTestCaseDesc		Create a CBluetoothSocket with a blank socket, using NewLC constructor.

//!				Uses API elements: NewLC()4

//! @SYMTestActions    		1. Create and start a session on the socket server

//!				2. Call the fourth NewLC of the CBluetoothSocket class

//!				3. Pop and destroy the CBluetoothSocket object from the cleanup stack

//! @SYMTestStatus		Implemented

//! @SYMTestPriority		Critical

//! @SYMTestExpectedResults  	Object created successfully

//! @SYMTestType		CIT

	START_TEST_BLOCK	10	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Unconnected.ini

			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			COMMAND		CBluetoothSocket1	RSocketServerConnect

			COMMAND		CBluetoothSocket1	NewLC		BT-USER-SOCK-PublicAPI-Unconnected-0007-0001command2NewLC

			COMMAND		CBluetoothSocket1	~

			COMMAND		CBluetoothSocket1	RSocketServerClose

	END_TEST_BLOCK

END_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0007

//!START_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0008

//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Unconnected-0008

//! @SYMAPI			CBluetoothSocket

//! @SYMAuthor			Johan Eriksson

//! @SYMCreationDate		16/03/2006

//! @SYMTestCaseDesc		Create a CBluetoothSocket with a blank socket, but with no session on the socket server

//!				Uses API elements: NewLC()4

//! @SYMTestActions    		1. Call the fourth NewLC of the CBluetoothSocket class without a session open on the socket server

//! @SYMTestStatus		Implemented

//! @SYMTestPriority		Critical

//! @SYMTestExpectedResults  	Leave, unable to create a socket

//! @SYMTestType		CIT

//!	START_TEST_BLOCK	10	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Unconnected.ini

//!			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

//!			COMMAND		CBluetoothSocket1	NewLC		BT-USER-SOCK-PublicAPI-Unconnected-0008-0001command1NewLC

//!			COMMAND		CBluetoothSocket1	~

//!	END_TEST_BLOCK	!PanicCode=0	!PanicString=KERN-EXEC

//!END_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0008

// Options

// SockType 	: KSockStream, KSockDatagram, KSockSeqPacket, KSockRaw

// Protocol 	: KL2CAP, KRFCOMM, KSD, KAVCTP, KTCIL2CAP

// Port		: RFCOMM 1-30 & KRfcommPassiveAutoBind, KL2CAPPassiveAutoBind,

START_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0009

//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Unconnected-0009

//! @SYMAPI			CBluetoothSocket

//! @SYMAuthor			Johan Eriksson

//! @SYMCreationDate		20/03/2006

//! @SYMTestCaseDesc		Set up a Bluetooth endpoint

//!				Uses API elements: NewL()1, Bind, listen()1

//! @SYMTestActions    		1. Create and start a session on the socket server

//!				2. Create a CBluetoothSocket using the NewL()1 with  KSockStream and KRFCOMM

//!				3. Create and instantiate a TBTSockAddr class

//!				4. Create a TBTServiceSecurity object and set all security settings to false

//!				5. Set the security of TBTSockAddr to the TBTServiceSecurity object

//!				6. Set the port of the TBTSockAddr to 1 (RFCOMM range is 1-30)

//!				7. Use the Bind method of the CBluetoothSocket to bind the TBTSockAddr to the Bluetooth object

//!				8. Call the listen1 method of the CBluetoothSocket object

//!				9. Do socket cleanup

//!				10. Delete CBluetoothSocket object

//! @SYMTestStatus		Implemented

//! @SYMTestPriority		Critical

//! @SYMTestExpectedResults  	No errors found

//! @SYMTestType		CIT

	START_TEST_BLOCK	10	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Unconnected.ini

			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			CREATE_OBJECT	TBTSockAddr	TBTSockAddr1	

			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	

			COMMAND		CBluetoothSocket1	RSocketServerConnect

			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Unconnected-0009-0001command2NewL

			COMMAND		TBTServiceSecurity1	Construct

			COMMAND		TBTSockAddr1	Construct

			COMMAND		TBTSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Unconnected-0009-0001command7SetSecurity

			COMMAND		TBTSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Unconnected-0009-0001command8SetBTAddr

			COMMAND		TBTSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Unconnected-0009-0001command9SetPort

			COMMAND		TBTSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Unconnected-0009-0001command10BTAddr

			COMMAND		CBluetoothSocket1	Bind		BT-USER-SOCK-PublicAPI-Unconnected-0009-0001command12Bind

			COMMAND		CBluetoothSocket1	Listen		BT-USER-SOCK-PublicAPI-Unconnected-0009-0001command13Listen

			COMMAND		CBluetoothSocket1	~

			COMMAND		CBluetoothSocket1	RSocketServerClose

	END_TEST_BLOCK

END_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0009

START_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0010

//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Unconnected-0010

//! @SYMAPI			CBluetoothSocket

//! @SYMAuthor			Johan Eriksson

//! @SYMCreationDate		20/03/2006

//! @SYMTestCaseDesc		Set up a Bluetooth endpoint

//!				Uses API elements: NewLC()1, SetLocalport, listen()2,LocalPort 

//! @SYMTestActions    		1. Create and start a session on the socket server

//!				2. Create a CBluetoothSocket using the NewLC()1 with KSockStream and KRFCOMM

//!				3. Use SetLocalport to bind with only port set use port 32

//!				4. Call the listen2 method of the CBluetoothSocket object

//!				5. Find out and verify the local port that has been allocated using LocalPort method

//!				6. Do socket cleanup

//!				7. Delete CBluetoothSocket object

//! @SYMTestStatus		Implemented

//! @SYMTestPriority		Critical

//! @SYMTestExpectedResults  	No errors found

//! @SYMTestType		CIT

	START_TEST_BLOCK	10	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Unconnected.ini

			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			COMMAND		CBluetoothSocket1	RSocketServerConnect

			COMMAND		CBluetoothSocket1	NewLC		BT-USER-SOCK-PublicAPI-Unconnected-0010-0001command2NewLC

			COMMAND		CBluetoothSocket1	SetLocalPort		BT-USER-SOCK-PublicAPI-Unconnected-0010-0001command3SetLocalPort

			COMMAND		CBluetoothSocket1	LocalPort

			COMMAND	!Error=-5	CBluetoothSocket1	Listen		BT-USER-SOCK-PublicAPI-Unconnected-0010-0001command5Listen

			COMMAND		CBluetoothSocket1	~

			COMMAND		CBluetoothSocket1	RSocketServerClose

	END_TEST_BLOCK

END_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0010

START_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0011

//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Unconnected-0011

//! @SYMAPI			CBluetoothSocket 

//! @SYMAuthor			Johan Eriksson

//! @SYMCreationDate		27/03/2006

//! @SYMTestCaseDesc		Set up a Bluetooth endpoint

//!				Uses API elements: NewL()1, Bind, Listen()3

//! @SYMTestActions    		1. Create and start a session on the socket server

//!				2. Create a CBluetoothSocket using the NewL()1 with  KSockStream and KRFCOMM

//!				3. Create and instantiate a TBTSockAddr class

//!				4. Create a TBTServiceSecurity object and set all security settings to false

//!				5. Set the security of TBTSockAddr to the TBTServiceSecurity object

//!				6. Set the port of the TBTSockAddr to 30 (RFCOMM range is 1-30)

//!				7. Use the Bind method of the CBluetoothSocket to bind the TBTSockAddr to the Bluetooth object

//!				8. Call the listen()3 method of the CBluetoothSocket object

//!				9. Do socket cleanup

//!				10. delete CBluetoothSocket object

//! @SYMTestStatus		Implemented

//! @SYMTestPriority		Critical

//! @SYMTestExpectedResults  	No errors found

//! @SYMTestType		CIT

	START_TEST_BLOCK	10	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Unconnected.ini

			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			CREATE_OBJECT	TBTSockAddr	TBTSockAddr1	

			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	

			COMMAND		CBluetoothSocket1	RSocketServerConnect

			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Unconnected-0011-0001command2NewL

			COMMAND		TBTServiceSecurity1	Construct

			COMMAND		TBTSockAddr1	Construct

			COMMAND		TBTSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Unconnected-0011-0001command7SetSecurity

			COMMAND		TBTSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Unconnected-0011-0001command8SetBTAddr

			COMMAND		TBTSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Unconnected-0011-0001command9SetPort

			COMMAND		CBluetoothSocket1	Bind		BT-USER-SOCK-PublicAPI-Unconnected-0011-0001command11Bind

			COMMAND		CBluetoothSocket1	Listen		BT-USER-SOCK-PublicAPI-Unconnected-0011-0001command12Listen

			COMMAND		CBluetoothSocket1	~

			COMMAND		CBluetoothSocket1	RSocketServerClose

	END_TEST_BLOCK

END_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0011

START_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0012

//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Unconnected-0012

//! @SYMAPI			CBluetoothSocket 

//! @SYMAuthor			Johan Eriksson

//! @SYMCreationDate		27/03/2006

//! @SYMTestCaseDesc		Set up a Bluetooth endpoint and test options

//!				Uses API elements: NewL()1, Bind, setOpt()1, setOpt()2, setOption(), getOpt()1, getOpt()2

//! @SYMTestActions    		1. Create and start a session on the socket server

//!				2. Create a CBluetoothSocket using the NewL()1 with  KSockStream and KRFCOMM

//!				3. Create and instantiate a TBTSockAddr class

//!				4. Create a TBTServiceSecurity object and set all security settings to false

//!				5. Set the security of TBTSockAddr to the TBTServiceSecurity object

//!				6. Set the port of the TBTSockAddr to 16 (RFCOMM range is 1-30)

//!				7. Use the Bind method of the CBluetoothSocket to bind the TBTSockAddr to the Bluetooth object

//!				8. Use setOpt()1 to set an option as a integer value

//!				9. Use setOpt()2 to set an option as a descriptor value

//!				10. Use setOption to set an option as a descriptor value

//!				11. Use getOpt()1 to get the option value as an int, set in step 8 and verify it

//!				12. Use getOpt()1 to get the option value as an int, set in step 9 and verify it

//!				13. Use getOpt()2 to get the option value as a descriptor, set in step 10 and verify it

//!				14. Use localName to get the unique name of the socket and verify it?

//!				15. Do socket cleanup

//!				16. delete CBluetoothSocket object

//! @SYMTestStatus		Implemented

//! @SYMTestPriority		Critical

//! @SYMTestExpectedResults  	No errors found, options set and retrieved correctly

//! @SYMTestType		CIT

	START_TEST_BLOCK	10	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Unconnected.ini

			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			CREATE_OBJECT	TBTSockAddr	TBTSockAddr1	

			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	

			COMMAND		CBluetoothSocket1	RSocketServerConnect

			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Unconnected-0012-0001command2NewL

			COMMAND		TBTServiceSecurity1	Construct

			COMMAND		TBTSockAddr1	Construct

			COMMAND		TBTSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Unconnected-0012-0001command7SetSecurity

			COMMAND		TBTSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Unconnected-0012-0001command8SetBTAddr

			COMMAND		CBluetoothSocket1	SetOption		BT-USER-SOCK-PublicAPI-Unconnected-0012-0001command10SetOption

			COMMAND		CBluetoothSocket1	GetOpt		BT-USER-SOCK-PublicAPI-Unconnected-0012-0001command11GetOpt

			COMMAND		CBluetoothSocket1	SetOpt		BT-USER-SOCK-PublicAPI-Unconnected-0012-0001command12SetOpt

			COMMAND		CBluetoothSocket1	GetOpt		BT-USER-SOCK-PublicAPI-Unconnected-0012-0001command13GetOpt

			COMMAND		CBluetoothSocket1	SetOpt		BT-USER-SOCK-PublicAPI-Unconnected-0012-0001command14SetOpt

			COMMAND		CBluetoothSocket1	GetOpt		BT-USER-SOCK-PublicAPI-Unconnected-0012-0001command15GetOpt

			COMMAND		CBluetoothSocket1	SetOpt		BT-USER-SOCK-PublicAPI-Unconnected-0012-0001command16SetOpt

			COMMAND		CBluetoothSocket1	GetOpt		BT-USER-SOCK-PublicAPI-Unconnected-0012-0001command17GetOpt

			COMMAND		CBluetoothSocket1	SetOpt		BT-USER-SOCK-PublicAPI-Unconnected-0012-0001command18SetOpt

			COMMAND		CBluetoothSocket1	GetOpt		BT-USER-SOCK-PublicAPI-Unconnected-0012-0001command19GetOpt

			COMMAND		CBluetoothSocket1	SetOpt		BT-USER-SOCK-PublicAPI-Unconnected-0012-0001command20SetOpt

			COMMAND		CBluetoothSocket1	GetOpt		BT-USER-SOCK-PublicAPI-Unconnected-0012-0001command21GetOpt

			COMMAND		CBluetoothSocket1	SetOpt		BT-USER-SOCK-PublicAPI-Unconnected-0012-0001command22SetOpt

			COMMAND		CBluetoothSocket1	GetOpt		BT-USER-SOCK-PublicAPI-Unconnected-0012-0001command23GetOpt

			COMMAND		CBluetoothSocket1	~

			COMMAND		CBluetoothSocket1	RSocketServerClose

	END_TEST_BLOCK

END_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0012

START_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0013

//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Unconnected-0013

//! @SYMAPI			CBluetoothSocket 

//! @SYMAuthor			Johan Eriksson

//! @SYMCreationDate		27/03/2006

//! @SYMTestCaseDesc		Set up a Bluetooth endpoint to test transfer

//!				Uses API elements: NewL()1, Bind, Name, Transfer, Info

//! @SYMTestActions    		1. Create and start a session on the socket server

//!				2. Create a CBluetoothSocket using the NewL()1 with  KSockStream and KRFCOMM

//!				3. Create and instantiate a TBTSockAddr class

//!				4. Create a TBTServiceSecurity object and set all security settings to false

//!				5. Set the security of TBTSockAddr to the TBTServiceSecurity object

//!				6. Set the port of the TBTSockAddr to 16 (RFCOMM range is 1-30)

//!				7. Use the Bind method of the CBluetoothSocket to bind the TBTSockAddr to the Bluetooth object

//!				8. Call Name to get the system name of the socket

//!				9. Create and start the second session on the socket server

//!				10. Use SetTransferAble to use SetOpt to conform to platsec requirments for transfer

//!				11. Call Transfer to transfer a socket from a socket server to the second one. 

//!				12. Call Info on the originating socket to verify the transfer, which returns KErrNone if the transfer failed, and KErrBadHandle if it succeeded. 

//!				13. Do socket cleanup

//!				14. delete CBluetoothSocket object

//! @SYMTestStatus		Implemented

//! @SYMTestPriority		Critical

//! @SYMTestExpectedResults  	KErrBadHandle found at step 10 indicating successful transfer

//! @SYMTestType		CIT

	START_TEST_BLOCK	10	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Unconnected.ini

			CREATE_OBJECT	RSocket	RSocket1	

			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			COMMAND		RSocket1	RSocketServerConnect

			COMMAND		RSocket1	RSocketOpen		BT-USER-SOCK-PublicAPI-Unconnected-0013-0001command2RSocketOpen

			COMMAND		CBluetoothSocket1	RSocketServerConnect

			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Unconnected-0013-0001command5NewL

			COMMAND		CBluetoothSocket1	Transfer		BT-USER-SOCK-PublicAPI-Unconnected-0013-0001command6Transfer

			COMMAND		CBluetoothSocket1	Info		BT-USER-SOCK-PublicAPI-Unconnected-0013-0001command7Info

			COMMAND		CBluetoothSocket1	Name

			COMMAND	!Error=-8	RSocket1	Info

			COMMAND		RSocket1	RSocketClose

			COMMAND		RSocket1	RSocketServerClose

			COMMAND		CBluetoothSocket1	~

			COMMAND		CBluetoothSocket1	RSocketServerClose

	END_TEST_BLOCK

END_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0013

// Client side unconnected tests

// Construction using Bluetooth socket named protocol 

START_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0018

//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Unconnected-0018

//! @SYMAPI			CBluetoothSocket

//! @SYMAuthor			Johan Eriksson

//! @SYMCreationDate		16/03/2006

//! @SYMTestCaseDesc		Create a CBluetoothSocket with a named protocol, using NewL constructor.

//!				Uses API elements: NewL()3 

//! @SYMTestActions    		1. Create and start a session on the socket server

//!				2. Call the third NewL of the CBluetoothSocket class

//!				3. Destroy object

//! @SYMTestStatus		Implemented

//! @SYMTestPriority		Critical

//! @SYMTestExpectedResults  	Object created successfully

//! @SYMTestType		CIT

	START_TEST_BLOCK	10	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Unconnected.ini

			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			COMMAND		CBluetoothSocket1	RSocketServerConnect

			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Unconnected-0018-0001command2NewL

			COMMAND		CBluetoothSocket1	~

			COMMAND		CBluetoothSocket1	RSocketServerClose

	END_TEST_BLOCK

END_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0018

//!START_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0019

//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Unconnected-0019

//! @SYMAPI			CBluetoothSocket

//! @SYMAuthor			Johan Eriksson

//! @SYMCreationDate		16/03/2006

//! @SYMTestCaseDesc		Create a CBluetoothSocket with a named protocol, but with no session on the socket server

//!				Uses API elements: NewL()3 

//! @SYMTestActions    		1. Call the third NewL of the CBluetoothSocket class without a session open on the socket server

//! @SYMTestStatus		Implemented

//! @SYMTestPriority		Critical

//! @SYMTestExpectedResults  	Leave, unable to create a socket

//! @SYMTestType		CIT

//!	START_TEST_BLOCK	10	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Unconnected.ini

//!			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

//!			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Unconnected-0019-0001command1NewL

//!			COMMAND		CBluetoothSocket1	~

//!	END_TEST_BLOCK	!PanicCode=0	!PanicString=KERN-EXEC

//!END_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0019

START_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0020

//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Unconnected-0020

//! @SYMAPI			CBluetoothSocket

//! @SYMAuthor			Johan Eriksson

//! @SYMCreationDate		16/03/2006

//! @SYMTestCaseDesc		Create a CBluetoothSocket with a named protocol, using NewLC constructor.

//!				Uses API elements: NewLC()3 

//! @SYMTestActions    		1. Create and start a session on the socket server

//!				2. Call the third NewLC of the CBluetoothSocket class

//!				3. Pop and destroy the CBluetoothSocket object from the cleanup stack

//! @SYMTestStatus		Implemented

//! @SYMTestPriority		Critical

//! @SYMTestExpectedResults  	Object created successfully

//! @SYMTestType		CIT

	START_TEST_BLOCK	10	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Unconnected.ini

			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			COMMAND		CBluetoothSocket1	RSocketServerConnect

			COMMAND		CBluetoothSocket1	NewLC		BT-USER-SOCK-PublicAPI-Unconnected-0020-0001command2NewLC

			COMMAND		CBluetoothSocket1	~

			COMMAND		CBluetoothSocket1	RSocketServerClose

	END_TEST_BLOCK

END_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0020

//!START_TESTCASE BT-USER-SOCK-PublicAPI-Unconnected-0021

//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Unconnected-0021

//! @SYMAPI			CBluetoothSocket

//! @SYMAuthor			Johan Eriksson