bluetoothapitest/bluetoothsvs/T_BTUserAPI/scripts/BT-USER-BTPhysicalLinkAdapter-PublicApi.script
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/bluetoothapitest/bluetoothsvs/T_BTUserAPI/scripts/BT-USER-BTPhysicalLinkAdapter-PublicApi.script Fri Jan 15 08:13:17 2010 +0200
@@ -0,0 +1,336 @@
+//
+// Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).
+// All rights reserved.
+// This component and the accompanying materials are made available
+// under the terms of "Eclipse Public License v1.0"
+// which accompanies this distribution, and is available
+// at the URL "http://www.eclipse.org/legal/epl-v10.html".
+//
+// Initial Contributors:
+// Nokia Corporation - initial contribution.
+//
+// Contributors:
+//
+// Description:
+//
+///////////////////////////////////////////////////////////////////////////////
+//! @file
+//! @SYMTestSuiteName T_BTUserAPI
+//! @SYMScriptTestEnvironment This test script requires a basic ROM with bluetooth dongle.
+//! @SYMScriptDescription Tests all public elements of the RBTPhysicalLinkAdapter classe
+//! as a means of confidence that the API works as expected.
+//! The purpose is to provide a regression test suite of PublishedAll APIs for
+//! BT USER related classes.
+//! Negative testing is performed to confirm that correct errors are returned
+//! when incorrect parameters are given. The tests are fully automated.
+//! @SYMAuthor Zoe Chen
+//! @SYMCreationDate 03/04/2007
+///////////////////////////////////////////////////////////////////////////////
+
+RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\
+RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\user\
+
+LOAD_SUITE T_BTUserAPI
+DELAY 500
+
+
+// ****************************************************************************
+// RBTPhysicalLinkAdapter
+// ****************************************************************************
+
+START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0001
+//! @SYMTestCaseID BT-USER-BTPhysicalLinkAdapter-PublicApi-0001
+//! @SYMAPI RBTPhysicalLinkAdapter
+//! @SYMTestCaseDesc Create a RBTPhysicalLinkAdapter object
+//! Uses API elements: RBTPhysicalLinkAdapter()
+//! @SYMTestActions Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority Low
+//! @SYMTestExpectedResults RBTPhysicalLinkAdapter object was created successfully
+//! @SYMTestType CIT
+
+ START_TEST_BLOCK 10 T_BTUserAPI \bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini
+ CREATE_OBJECT RBTPhysicalLinkAdapter RBTPhysicalLinkAdapter1
+ COMMAND RBTPhysicalLinkAdapter1 RBTPhysicalLinkAdapter
+ END_TEST_BLOCK
+
+END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0001
+
+
+START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0002
+//! @SYMTestCaseID BT-USER-BTPhysicalLinkAdapter-PublicApi-0002
+//! @SYMAPI RBTPhysicalLinkAdapter, CBluetoothPhysicalLinks and RSocketServ
+//! @SYMTestCaseDesc Open a physical link adapter on an existing physical link
+//! Uses API elements: NewL(), CreateConnection() and destructor from CBluetoothPhysicalLinks
+//! RBTPhysicalLinkAdapter(), Open()2 and Close() from RBTPhysicalLinkAdapter
+//! RSocketServ(), Connect() and Close() from RSocketServ
+//! @SYMTestActions 1. Create and start a session on the socket server
+//! 2. Open a Bluetooth socket using NewL() function. Return KErrNone if successful
+//! 3. Bring in a new member to the piconet with a device address(11111111) using
+//! CreateConnection() function. Return KErrNone if successful
+//! 4. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function
+//! 5. Open a physical link adapter on an existing physical link with a device address(11111111)
+//! using Open()2 function. Return KErrNone if successful
+//! 6. Close the physical link adapter using Close() function
+//! 7. Delete the socket using destructor
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority Low
+//! @SYMTestExpectedResults KErrNone returned
+//! @SYMTestType CIT
+
+ START_TEST_BLOCK 10 T_BTUserAPI \bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini
+ CREATE_OBJECT RBTPhysicalLinkAdapter RBTPhysicalLinkAdapter1
+ CREATE_OBJECT CBluetoothPhysicalLinks CBluetoothPhysicalLinks1
+ CREATE_OBJECT RSocketServ RSocketServ1
+ COMMAND RSocketServ1 RSocketServ
+ COMMAND RSocketServ1 Connect
+ COMMAND CBluetoothPhysicalLinks1 NewL BT-USER-BTPhysicalLinkAdapter-PublicApi-0002-0001command5NewL
+ COMMAND CBluetoothPhysicalLinks1 CreateConnection BT-USER-BTPhysicalLinkAdapter-PublicApi-0002-0001command6CreateConnection
+ COMMAND RBTPhysicalLinkAdapter1 RBTPhysicalLinkAdapter
+ COMMAND RBTPhysicalLinkAdapter1 Open BT-USER-BTPhysicalLinkAdapter-PublicApi-0002-0001command9Open
+ COMMAND RBTPhysicalLinkAdapter1 Close
+ COMMAND CBluetoothPhysicalLinks1 ~
+ COMMAND RSocketServ1 Close
+ END_TEST_BLOCK
+
+END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0002
+
+
+START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0003
+//! @SYMTestCaseID BT-USER-BTPhysicalLinkAdapter-PublicApi-0003
+//! @SYMAPI RBTPhysicalLinkAdapter, CBluetoothPhysicalLinks and RSocketServ
+//! @SYMTestCaseDesc Check whether the physical link adapter is open
+//! Uses API elements: NewL(), CreateConnection() and destructor from CBluetoothPhysicalLinks
+//! RBTPhysicalLinkAdapter(), Open()2 and IsOpen() from RBTPhysicalLinkAdapter
+//! RSocketServ(), Connect() and Close() from RSocketServ
+//! @SYMTestActions 1. Create and start a session on the socket server
+//! 2. Open a Bluetooth socket using NewL() function. Return KErrNone if successful
+//! 3. Bring in a new member to the piconet with a device address(11111111) using
+//! CreateConnection() function. Return KErrNone if successful
+//! 4. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function
+//! 5. Check whether the physical link adapter is open using IsOpen() function.
+//! 6. Verify that the result (False) is as expected (False)
+//! 7. Open a physical link adapter on an existing physical link with a device address(11111111)
+//! using Open()2 function. Return KErrNone if successful
+//! 8. Check whether the physical link adapter is open using IsOpen() function.
+//! 9. Verify that the result (True) is as expected (True)
+//! 10. Delete the socket using destructor
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority Low
+//! @SYMTestExpectedResults True if the physical link adapter is open, otherwise false
+//! @SYMTestType CIT
+
+ START_TEST_BLOCK 10 T_BTUserAPI \bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini
+ CREATE_OBJECT RBTPhysicalLinkAdapter RBTPhysicalLinkAdapter1
+ CREATE_OBJECT CBluetoothPhysicalLinks CBluetoothPhysicalLinks1
+ CREATE_OBJECT RSocketServ RSocketServ1
+ COMMAND RSocketServ1 RSocketServ
+ COMMAND RSocketServ1 Connect
+ COMMAND CBluetoothPhysicalLinks1 NewL BT-USER-BTPhysicalLinkAdapter-PublicApi-0003-0001command5NewL
+ COMMAND CBluetoothPhysicalLinks1 CreateConnection BT-USER-BTPhysicalLinkAdapter-PublicApi-0003-0001command6CreateConnection
+ COMMAND RBTPhysicalLinkAdapter1 RBTPhysicalLinkAdapter
+ COMMAND RBTPhysicalLinkAdapter1 IsOpen BT-USER-BTPhysicalLinkAdapter-PublicApi-0003-0001command9IsOpen
+ COMMAND RBTPhysicalLinkAdapter1 Open BT-USER-BTPhysicalLinkAdapter-PublicApi-0003-0001command10Open
+ COMMAND RBTPhysicalLinkAdapter1 IsOpen BT-USER-BTPhysicalLinkAdapter-PublicApi-0003-0001command11IsOpen
+ COMMAND CBluetoothPhysicalLinks1 ~
+ COMMAND RSocketServ1 Close
+ END_TEST_BLOCK
+
+END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0003
+
+
+START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0004
+//! @SYMTestCaseID BT-USER-BTPhysicalLinkAdapter-PublicApi-0004
+//! @SYMAPI RBTPhysicalLinkAdapter, CBluetoothPhysicalLinks and RSocketServ
+//! @SYMTestCaseDesc Update the set of baseband packet types that are allowed locally
+//! Uses API elements: NewL(), CreateConnection() and destructor from CBluetoothPhysicalLinks
+//! RBTPhysicalLinkAdapter(), Open()2, RequestChangeSupportedPacketTypes() and Close() from RBTPhysicalLinkAdapter
+//! RSocketServ(), Connect() and Close() from RSocketServ
+//! @SYMTestActions 1. Create and start a session on the socket server
+//! 2. Open a Bluetooth socket using NewL() function. Return KErrNone if successful
+//! 3. Bring in a new member to the piconet with a device address(11111111) using
+//! CreateConnection() function. Return KErrNone if successful
+//! 4. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function
+//! 5. Open a physical link adapter on an existing physical link with a device address(11111111)
+//! using Open()2 function. Return KErrNone if successful
+//! 6. Update the set of baseband packet types that are allowed locally using
+//! RequestChangeSupportedPacketTypes() function. Return KErrNone if successful
+//! 7. Close the physical link adapter using Close() function
+//! 8. Delete the socket using destructor
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority Low
+//! @SYMTestExpectedResults KErrNone returned
+//! @SYMTestType CIT
+
+ START_TEST_BLOCK 10 T_BTUserAPI \bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini
+ CREATE_OBJECT RBTPhysicalLinkAdapter RBTPhysicalLinkAdapter1
+ CREATE_OBJECT CBluetoothPhysicalLinks CBluetoothPhysicalLinks1
+ CREATE_OBJECT RSocketServ RSocketServ1
+ COMMAND RSocketServ1 RSocketServ
+ COMMAND RSocketServ1 Connect
+ COMMAND CBluetoothPhysicalLinks1 NewL BT-USER-BTPhysicalLinkAdapter-PublicApi-0004-0001command5NewL
+ COMMAND CBluetoothPhysicalLinks1 CreateConnection BT-USER-BTPhysicalLinkAdapter-PublicApi-0004-0001command6CreateConnection
+ COMMAND RBTPhysicalLinkAdapter1 RBTPhysicalLinkAdapter
+ COMMAND RBTPhysicalLinkAdapter1 Open BT-USER-BTPhysicalLinkAdapter-PublicApi-0004-0001command9Open
+ COMMAND RBTPhysicalLinkAdapter1 RequestChangeSupportedPacketTypes BT-USER-BTPhysicalLinkAdapter-PublicApi-0004-0001command10RequestChangeSupportedPacketTypes
+ COMMAND RBTPhysicalLinkAdapter1 Close
+ COMMAND CBluetoothPhysicalLinks1 ~
+ COMMAND RSocketServ1 Close
+ END_TEST_BLOCK
+
+END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0004
+
+
+// ****************************************************************************
+// Negative test cases
+// ****************************************************************************
+
+START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0005
+//! @SYMTestCaseID BT-USER-BTPhysicalLinkAdapter-PublicApi-0005
+//! @SYMAPI RBTPhysicalLinkAdapter and RSocketServ
+//! @SYMTestCaseDesc Open a physical link adapter on a socket which is not open and connected
+//! Uses API elements: RBTPhysicalLinkAdapter(), Open()1 and Close() from RBTPhysicalLinkAdapter
+//! RSocketServ(), Connect() and Close() from RSocketServ
+//! @SYMTestActions 1. Create and start a session on the socket server
+//! 2. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function
+//! 3. Open a physical link adapter on an existing physical with a RSocket object link
+//! using Open()1 function. Return KErrNone if successful
+//! 4. Close the physical link adapter using Close() function
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority Low
+//! @SYMTestExpectedResults KErrNotReady(-18) returned at step 2
+//! @SYMTestType CIT
+
+ START_TEST_BLOCK 10 T_BTUserAPI \bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini
+ CREATE_OBJECT RBTPhysicalLinkAdapter RBTPhysicalLinkAdapter1
+ CREATE_OBJECT RSocket RSocket1
+ CREATE_OBJECT RSocketServ RSocketServ1
+ COMMAND RSocketServ1 RSocketServ
+ COMMAND RSocketServ1 Connect
+ COMMAND RBTPhysicalLinkAdapter1 RBTPhysicalLinkAdapter
+ COMMAND !Error=-18 RBTPhysicalLinkAdapter1 Open BT-USER-BTPhysicalLinkAdapter-PublicApi-0005-0001command6Open
+ COMMAND RBTPhysicalLinkAdapter1 Close
+ COMMAND RSocketServ1 Close
+ END_TEST_BLOCK
+
+END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0005
+
+
+START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0007
+//! @SYMTestCaseID BT-USER-BTPhysicalLinkAdapter-PublicApi-0007
+//! @SYMAPI RBTPhysicalLinkAdapter, CBluetoothPhysicalLinks and RSocketServ
+//! @SYMTestCaseDesc Block a role switch
+//! Uses API elements: NewL(), CreateConnection() and destructor from CBluetoothPhysicalLinks
+//! RBTPhysicalLinkAdapter(), Open()2, AllowRoleSwitch(), PreventRoleSwitch() and Close() from RBTPhysicalLinkAdapter
+//! RSocketServ(), Connect() and Close() from RSocketServ
+//! @SYMTestActions 1. Create and start a session on the socket server
+//! 2. Open a Bluetooth socket using NewL() function. Return KErrNone if successful
+//! 3. Bring in a new member to the piconet with a device address(22222222) using
+//! CreateConnection() function. Return KErrNone if successful
+//! 4. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function
+//! 5. Open a physical link adapter on an existing physical link with a device address(22222222)
+//! using Open()2 function. Return KErrNone if successful
+//! 6. Ensure this object does not block a role switch using AllowRoleSwitch() function.
+//! Return KErrNone if successful
+//! 7. Block a role switch using PreventRoleSwitch() function. Return KErrNone if successful
+//! 8. Close the physical link adapter using Close() function
+//! 9. Delete the socket using destructor
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority Low
+//! @SYMTestExpectedResults KErrDisconnected(-36) returned at step 6 and 7
+//! @SYMTestType CIT
+
+ START_TEST_BLOCK 10 T_BTUserAPI \bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini
+ CREATE_OBJECT RBTPhysicalLinkAdapter RBTPhysicalLinkAdapter1
+ CREATE_OBJECT CBluetoothPhysicalLinks CBluetoothPhysicalLinks1
+ CREATE_OBJECT RSocketServ RSocketServ1
+ COMMAND RSocketServ1 RSocketServ
+ COMMAND RSocketServ1 Connect
+ COMMAND CBluetoothPhysicalLinks1 NewL BT-USER-BTPhysicalLinkAdapter-PublicApi-0007-0001command5NewL
+ COMMAND CBluetoothPhysicalLinks1 CreateConnection BT-USER-BTPhysicalLinkAdapter-PublicApi-0007-0001command6CreateConnection
+ COMMAND RBTPhysicalLinkAdapter1 RBTPhysicalLinkAdapter
+ COMMAND RBTPhysicalLinkAdapter1 Open BT-USER-BTPhysicalLinkAdapter-PublicApi-0007-0001command9Open
+ COMMAND !Error=-36 RBTPhysicalLinkAdapter1 AllowRoleSwitch
+ COMMAND !Error=-36 RBTPhysicalLinkAdapter1 PreventRoleSwitch
+ COMMAND RBTPhysicalLinkAdapter1 Close
+ COMMAND CBluetoothPhysicalLinks1 ~
+ COMMAND RSocketServ1 Close
+ END_TEST_BLOCK
+
+END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0007
+
+
+START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0008
+//! @SYMTestCaseID BT-USER-BTPhysicalLinkAdapter-PublicApi-0008
+//! @SYMAPI RBTPhysicalLinkAdapter
+//! @SYMTestCaseDesc Check whether the physical link adapter is open
+//! Uses API elements: RBTPhysicalLinkAdapter() and IsOpen()
+//! @SYMTestActions 1. Create an empty RBTPhysicalLinkAdapter object
+//! 2. Verify that if the physical link adapter is open
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority Low
+//! @SYMTestExpectedResults Returned False
+//! @SYMTestType CIT
+
+ START_TEST_BLOCK 10 T_BTUserAPI \bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini
+ CREATE_OBJECT RBTPhysicalLinkAdapter RBTPhysicalLinkAdapter1
+ COMMAND RBTPhysicalLinkAdapter1 RBTPhysicalLinkAdapter
+ COMMAND RBTPhysicalLinkAdapter1 IsOpen BT-USER-BTPhysicalLinkAdapter-PublicApi-0008-0001command2IsOpen
+ END_TEST_BLOCK
+
+END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0008
+
+
+START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0009
+//! @SYMTestCaseID BT-USER-BTPhysicalLinkAdapter-PublicApi-0009
+//! @SYMAPI RBTPhysicalLinkAdapter and RSocketServ
+//! @SYMTestCaseDesc Open a physical link adapter on a socket which is not open and connected
+//! Uses API elements: RBTPhysicalLinkAdapter(), Open()2 and Close() from RBTPhysicalLinkAdapter
+//! RSocketServ(), Connect() and Close() from RSocketServ
+//! @SYMTestActions 1. Create and start a session on the socket server
+//! 2. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function
+//! 3. Open a physical link adapter without an existing physical links using Open()2 function.
+//! Return KErrNone if successful
+//! 4. Close the physical link adapter using Close() function
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority Low
+//! @SYMTestExpectedResults KErrNone returned
+//! @SYMTestType CIT
+
+ START_TEST_BLOCK 10 T_BTUserAPI \bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini
+ CREATE_OBJECT RBTPhysicalLinkAdapter RBTPhysicalLinkAdapter1
+ CREATE_OBJECT RSocketServ RSocketServ1
+ COMMAND RSocketServ1 RSocketServ
+ COMMAND RSocketServ1 Connect
+ COMMAND RBTPhysicalLinkAdapter1 RBTPhysicalLinkAdapter
+ COMMAND RBTPhysicalLinkAdapter1 Open BT-USER-BTPhysicalLinkAdapter-PublicApi-0009-0001command6Open
+ COMMAND RBTPhysicalLinkAdapter1 Close
+ COMMAND RSocketServ1 Close
+ END_TEST_BLOCK
+
+END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0009
+
+
+//!START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0006
+//! @SYMTestCaseID BT-USER-BTPhysicalLinkAdapter-PublicApi-0006
+//! @SYMAPI RBTPhysicalLinkAdapter and RSocketServ
+//! @SYMTestCaseDesc Open a physical link adapter on a socket which is not open and connected
+//! Uses API elements: RBTPhysicalLinkAdapter() and Open()2
+//! @SYMTestActions 1. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function
+//! 2. Open a physical link adapter without an existing physical links
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority Low
+//! @SYMTestExpectedResults Panic at step 2
+//! @SYMTestType CIT
+
+//! START_TEST_BLOCK 10 T_BTUserAPI \bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini
+//! CREATE_OBJECT RBTPhysicalLinkAdapter RBTPhysicalLinkAdapter1
+//! CREATE_OBJECT RSocketServ RSocketServ1
+//! COMMAND RBTPhysicalLinkAdapter1 RBTPhysicalLinkAdapter
+//! COMMAND RBTPhysicalLinkAdapter1 Open BT-USER-BTPhysicalLinkAdapter-PublicApi-0006-0001command2Open
+//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC
+
+//!END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0006
+
+
+DELAY 2000