--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/resourcemgmt/hwresourcesmgr/test/te_hwrm/te_hwrm_power.script Tue Feb 02 00:53:00 2010 +0200
@@ -0,0 +1,532 @@
+// Copyright (c) 2008-2009 Nokia Corporation and/or its subsidiary(-ies).
+// All rights reserved.
+// This component and the accompanying materials are made available
+// under the terms of "Eclipse Public License v1.0"
+// which accompanies this distribution, and is available
+// at the URL "http://www.eclipse.org/legal/epl-v10.html".
+//
+// Initial Contributors:
+// Nokia Corporation - initial contribution.
+//
+// Contributors:
+//
+// Description:
+//
+
+//! @file te_hwrm_power.script
+//! @SYMTestSuiteName DEVSRVS-HWRM
+//! @SYMScriptTestEnvironment telephony
+
+LOAD_SUITE te_hwrm
+
+START_TESTCASE DEVSRVS-HWRM-B-0001
+//!@SYMTestCaseID DEVSRVS-HWRM-B-0001
+//!@SYMComponent telephony_hwrm
+//!@SYMTestCaseDesc Checking all basic power status are correct
+//!@SYMTestPriority High
+//!@SYMTestActions open power state sessions, checking battery level, battery status and charging status is correct
+//!@SYMTestExpectedResults Pass
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerStatesL
+END_TESTCASE DEVSRVS-HWRM-B-0001
+
+START_TESTCASE DEVSRVS-HWRM-P-0002
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0002
+//!@SYMComponent telephony_hwrm
+//!@SYMTestCaseDesc Opens a Power Session
+//!@SYMTestPriority High
+//!@SYMTestActions Opens a Power Session
+//!@SYMTestExpectedResults Pass
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerConnectL
+END_TESTCASE DEVSRVS-HWRM-P-0002
+
+START_TESTCASE DEVSRVS-HWRM-P-0003
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0003
+//!@SYMComponent telephony_hwrm
+//!@SYMTestCaseDesc Client gets Battery Info
+//!@SYMTestPriority High
+//!@SYMTestActions Open Power Session, issue GetBatteryInfo request. Results returned from the PowerMockSy are checked that are the expected.
+//!@SYMTestExpectedResults Pass
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerGetBatteryInfoL
+END_TESTCASE DEVSRVS-HWRM-P-0003
+
+START_TESTCASE DEVSRVS-HWRM-P-0004
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0004
+//!@SYMComponent telephony_hwrm
+//!@SYMTestCaseDesc 3 clients get Battery Info.
+//!@SYMTestPriority High
+//!@SYMTestActions Open 3Power Sessions, issue one GetBatteryInfo request for each client. Results returned from the PowerMockSy are checked that are the expected for each of the clients.
+//!@SYMTestExpectedResults Pass
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerGetBatteryInfoMultiClientL
+END_TESTCASE DEVSRVS-HWRM-P-0004
+
+START_TESTCASE DEVSRVS-HWRM-P-0005
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0005
+//!@SYMComponent telephony_hwrm
+//!@SYMTestCaseDesc Gets Battery Info and a plugin error occurs.
+//!@SYMTestPriority High
+//!@SYMTestActions Open Power Session, issue GetBatteryInfo request. Expected error is returned from the PowerMockSy.
+//!@SYMTestExpectedResults Pass
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerGetBatteryInfoWithPluginErrorL
+END_TESTCASE DEVSRVS-HWRM-P-0005
+
+START_TESTCASE DEVSRVS-HWRM-P-0006
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0006
+//!@SYMComponent telephony_hwrm
+//!@SYMTestCaseDesc Client gets Battery Voltage Info
+//!@SYMTestPriority High
+//!@SYMTestActions Open Power Session, issue GetBatteryVoltageInfo request. Results returned from the PowerMockSy are checked that are the expected.
+//!@SYMTestExpectedResults Pass
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerGetBatteryVoltageInfoL
+END_TESTCASE DEVSRVS-HWRM-P-0006
+
+START_TESTCASE DEVSRVS-HWRM-P-0007
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0007
+//!@SYMComponent telephony_hwrm
+//!@SYMTestCaseDesc 3 clients get Battery Voltage Info.
+//!@SYMTestPriority High
+//!@SYMTestActions Open 3Power Sessions, issue one GetBatteryInfo request for each client. Results returned from the PowerMockSy are checked that are the expected for each of the clients.
+//!@SYMTestExpectedResults Pass
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerGetBatteryVoltageInfoMultiClientL
+END_TESTCASE DEVSRVS-HWRM-P-0007
+
+START_TESTCASE DEVSRVS-HWRM-P-0008
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0008
+//!@SYMComponent telephony_hwrm
+//!@SYMTestCaseDesc Gets Battery Voltage Info and a plugin error occurs.
+//!@SYMTestPriority High
+//!@SYMTestActions Open Power Session, issue GetBatteryVoltageInfo request. Expected error is returned from the PowerMockSy.
+//!@SYMTestExpectedResults Pass
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerGetBatteryVoltageInfoWithPluginErrorL
+END_TESTCASE DEVSRVS-HWRM-P-0008
+
+START_TESTCASE DEVSRVS-HWRM-P-0009
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0009
+//!@SYMComponent telephony_hwrm
+//!@SYMTestCaseDesc Gets Battery Base Interval used for measurements reporting.
+//!@SYMTestPriority High
+//!@SYMTestActions Open Power Session, request Base Time Interval (retrieved from Central Repository).
+//!@SYMTestExpectedResults Pass
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerGetBaseTimeIntervalL
+END_TESTCASE DEVSRVS-HWRM-P-0009
+
+START_TESTCASE DEVSRVS-HWRM-P-0010
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0010
+//!@SYMComponent telephony_hwrm
+//!@SYMPREQ CR1833
+//!@SYMREQ REQ12251 REQ12255 REQ12253 REQ12252
+//!@SYMTestCaseDesc Verify the battery power notification from the system
+//!@SYMTestPriority High
+//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server
+//! 2. Register the power notification callback
+//! 3. Call power attribute notification request API
+//! 4. Stop the notification after some time delay which should be less than max sampling period
+//!@SYMTestExpectedResults Check the battery power attributes reported via the registered callback
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotifyL
+END_TESTCASE DEVSRVS-HWRM-P-0010
+
+START_TESTCASE DEVSRVS-HWRM-P-0011
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0011
+//!@SYMComponent telephony_hwrm
+//!@SYMPREQ CR1833
+//!@SYMREQ REQ12251 REQ12255 REQ12253 REQ12252 REQ12254
+//!@SYMTestCaseDesc Verify the duration of the power notification from the system
+//!@SYMTestPriority High
+//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server
+//! 2. Register the power notification callback
+//! 3. Set the maximum sampling period value to zero
+//! 4. Call power attribute notification request API
+//! 5. Stop the notification after 30msec time delay
+//!@SYMTestExpectedResults Check the battery power attributes reported via the registered callback
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_InfiniteL
+END_TESTCASE DEVSRVS-HWRM-P-0011
+
+START_TESTCASE DEVSRVS-HWRM-P-0012
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0012
+//!@SYMComponent telephony_hwrm
+//!@SYMPREQ CR1833
+//!@SYMREQ REQ12251 REQ12255 REQ12253 REQ12252 REQ12254
+//!@SYMTestCaseDesc Verify the dynamic configuration of maximum sampling period.
+//!@SYMTestPriority High
+//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server
+//! 2. Register the power notification callback
+//! 3. Call power attribute notification request API
+//! 4. Set the maximum sampling period to 30 sec
+//! 5. Wait for the notification to stop after 30 sec over all.
+//! 6. Change back the maximum sampling period to its old value
+//!@SYMTestExpectedResults Check the timeout error after the maximum sampling period
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_AdjustReportingPeriodL
+END_TESTCASE DEVSRVS-HWRM-P-0012
+
+START_TESTCASE DEVSRVS-HWRM-P-0013
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0013
+//!@SYMComponent telephony_hwrm
+//!@SYMPREQ CR1833
+//!@SYMREQ REQ12251 REQ12255 REQ12253 REQ12252
+//!@SYMTestCaseDesc Verify the sampling interval accepted by the system
+//!@SYMTestPriority High
+//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server
+//! 2. Register the power notification callback
+//! 3. Call power attribute notification request API with a sampling interval greater than 10
+//! 4. Stop the notification after some time delay
+//!@SYMTestExpectedResults Check the battery power attributes reported via the registered callback
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_BigIntervalL
+END_TESTCASE DEVSRVS-HWRM-P-0013
+
+START_TESTCASE DEVSRVS-HWRM-P-0014
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0014
+//!@SYMComponent telephony_hwrm
+//!@SYMPREQ CR1833
+//!@SYMREQ REQ12251
+//!@SYMTestCaseDesc Verify the battery power notification from the system to multiple clients
+//!@SYMTestPriority High
+//!@SYMTestActions 1. Create three different power objects to mimic the multiple client session
+//! 2. Register the power notification callbacks
+//! 3. Call battery power notification request API for each power object
+//! 4. Stop the request one by one after some time delay
+//!@SYMTestExpectedResults Check the power notification registered via the callback
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_MultiClient_SameIntervalL
+END_TESTCASE DEVSRVS-HWRM-P-0014
+
+START_TESTCASE DEVSRVS-HWRM-P-0015
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0015
+//!@SYMComponent telephony_hwrm
+//!@SYMPREQ CR1833
+//!@SYMREQ REQ12251
+//!@SYMTestCaseDesc Verify the battery power notification from the system to multiple clients
+//!@SYMTestPriority High
+//!@SYMTestActions 1. Create three different power objects to mimic the multiple client session
+//! 2. Register the power notification callbacks
+//! 3. Call battery power notification request API for each power object
+//! 4. Stop the request one by one after some time delay
+//!@SYMTestExpectedResults Check the power notification registered via the callback
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_MultiClient_DiffIntervalL
+END_TESTCASE DEVSRVS-HWRM-P-0015
+
+START_TESTCASE DEVSRVS-HWRM-P-0016
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0016
+//!@SYMComponent telephony_hwrm
+//!@SYMPREQ CR1833
+//!@SYMREQ REQ12251
+//!@SYMTestCaseDesc Verify the system returns proper error code for the power notification request
+//!@SYMTestPriority High
+//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server
+//! 2. Register the power notification callback
+//! 3. Call power notification request API
+//! 4. Call power notification request API again
+//!@SYMTestExpectedResults The return error code at step 4 should be KErrAlreadyExists
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_RedundantL
+END_TESTCASE DEVSRVS-HWRM-P-0016
+
+START_TESTCASE DEVSRVS-HWRM-P-0017
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0017
+//!@SYMComponent telephony_hwrm
+//!@SYMPREQ CR1833
+//!@SYMREQ REQ12251
+//!@SYMTestCaseDesc Verify that the plug-in error code is passed back to the client
+//!@SYMTestPriority Medium
+//!@SYMTestActions 1. Create the power session
+//! 2. Set the expected command for the MockSy plugin to power notification request
+//! 3. Set the response package as error for the MockSy plugin
+//! 4. Call power notification request API
+//!@SYMTestExpectedResults Check the expected error code is receicved via the callback
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_Start_PluginErrorL
+END_TESTCASE DEVSRVS-HWRM-P-0017
+
+START_TESTCASE DEVSRVS-HWRM-P-0018
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0018
+//!@SYMComponent telephony_hwrm
+//!@SYMPREQ CR1833
+//!@SYMREQ REQ12251
+//!@SYMTestCaseDesc Verify that the notification cleanup is done by the system
+//!@SYMTestPriority Medium
+//!@SYMTestActions 1. Create the power session
+//! 2. Call power notification request API
+//! 3. Set the expected command for the MockSY plugin as stop power notification
+//! 4. Set the response package as error for the MockSY plugin
+//! 5. Call Stop power notification
+//!@SYMTestExpectedResults Check the remaining results have been sent back to the client before cancelling the request
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_Stop_PluginErrorL
+END_TESTCASE DEVSRVS-HWRM-P-0018
+
+START_TESTCASE DEVSRVS-HWRM-P-0019
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0019
+//!@SYMComponent telephony_hwrm
+//!@SYMPREQ CR1833
+//!@SYMREQ REQ12251
+//!@SYMTestCaseDesc Verify the sampling interval accepted by the system
+//!@SYMTestPriority High
+//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server
+//! 2. Register the power notification callback
+//! 3. Call power attribute notification request API with a sampling interval 20
+//! 4. Stop the notification after some time delay
+//!@SYMTestExpectedResults Check atleast one battery power attributes reported via the registered callback
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_IntervalEqualL
+END_TESTCASE DEVSRVS-HWRM-P-0019
+
+START_TESTCASE DEVSRVS-HWRM-P-0020
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0020
+//!@SYMComponent telephony_hwrm
+//!@SYMPREQ CR1833
+//!@SYMREQ REQ12251
+//!@SYMTestCaseDesc Verify the sampling interval accepted by the system
+//!@SYMTestPriority High
+//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server
+//! 2. Register the power notification callback
+//! 3. Call power attribute notification request API with a sampling interval 50
+//!@SYMTestExpectedResults Check the timeout error after the maximum sampling period
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_IntervalGreaterL
+END_TESTCASE DEVSRVS-HWRM-P-0020
+
+START_TESTCASE DEVSRVS-HWRM-P-0021
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0021
+//!@SYMComponent telephony_hwrm
+//!@SYMPREQ CR1833
+//!@SYMREQ REQ12254
+//!@SYMTestCaseDesc Verify the system accepts the new maximum sampling period
+//!@SYMTestPriority High
+//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server
+//! 2. Register the power notification callback
+//! 3. Change the maximum sampling period other than the old value
+//! 4. Call power attribute notification request API
+//! 5. Wait till the new time interval elapses
+//!@SYMTestExpectedResults Check the timeout error after the new maximum sampling period
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_AdjustReportingPeriod_WithoutRequestL
+END_TESTCASE DEVSRVS-HWRM-P-0021
+
+START_TESTCASE DEVSRVS-HWRM-P-0022
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0022
+//!@SYMComponent telephony_hwrm
+//!@SYMPREQ CR1833
+//!@SYMREQ REQ12254
+//!@SYMTestCaseDesc Verify the dynamic configuration of maximum sampling period.
+//!@SYMTestPriority Medium
+//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server
+//! 2. Register the power notification callback
+//! 3. Call power attribute notification request API
+//! 4. Set the maximum sampling period to 30 sec
+//! 5. Wait for the notification to stop after 30 sec over all.
+//! 6. Change back the maximum sampling period to its old value
+//!@SYMTestExpectedResults Check the timeout error after the maximum sampling period
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_AdjustReportingPeriod_ElapsedTimeLessL
+END_TESTCASE DEVSRVS-HWRM-P-0045
+
+START_TESTCASE DEVSRVS-HWRM-P-0046
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0046
+//!@SYMComponent telephony_hwrm
+//!@SYMPREQ CR1833
+//!@SYMREQ REQ12254
+//!@SYMTestCaseDesc Verify the dynamic configuration of maximum sampling period.
+//!@SYMTestPriority Medium
+//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server
+//! 2. Register the power notification callback
+//! 3. Call power attribute notification request API
+//! 4. Set the maximum sampling period to 10 sec after 10 sec
+//! 5. Wait for the notification to stop.
+//! 6. Change back the maximum sampling period to its old value
+//!@SYMTestExpectedResults Check the timeout error at step 5
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_AdjustReportingPeriod_ElapsedTimeMoreL
+END_TESTCASE DEVSRVS-HWRM-P-0022
+
+START_TESTCASE DEVSRVS-HWRM-P-0023
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0023
+//!@SYMComponent telephony_hwrm
+//!@SYMPREQ CR1833
+//!@SYMREQ REQ12254
+//!@SYMTestCaseDesc Verify the dynamic configuration of maximum sampling period.
+//!@SYMTestPriority Medium
+//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server
+//! 2. Register the power notification callback
+//! 3. Call power attribute notification request API
+//! 4. Set the maximum sampling period to 0
+//! 5. Wait for the notification till 2 mins then stop it
+//! 6. Change back the maximum sampling period to its old value
+//!@SYMTestExpectedResults Check the notification does not stop
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_AdjustReportingPeriod_NonZeroToZeroL
+END_TESTCASE DEVSRVS-HWRM-P-0023
+
+START_TESTCASE DEVSRVS-HWRM-P-0024
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0024
+//!@SYMComponent telephony_hwrm
+//!@SYMPREQ CR1833
+//!@SYMREQ REQ12254
+//!@SYMTestCaseDesc Verify the dynamic configuration of maximum sampling period.
+//!@SYMTestPriority Medium
+//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server
+//! 2. Register the power notification callback
+//! 3. Call power attribute notification request API
+//! 4. Set the maximum sampling period to 0
+//! 5. Wait for the notification till 2 minst
+//! 6. Change back the maximum sampling period to its old value7. Wait for the notification to stop after 20 sec
+//!@SYMTestExpectedResults Check the timeout error after the maximum sampling period at state 7
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_AdjustReportingPeriod_ZeroToNonZeroL
+END_TESTCASE DEVSRVS-HWRM-P-0024
+
+START_TESTCASE DEVSRVS-HWRM-P-0025
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0025
+//!@SYMComponent telephony_hwrm
+//!@SYMPREQ CR1833
+//!@SYMREQ REQ12254
+//!@SYMTestCaseDesc Verify the dynamic configuration of maximum sampling period.
+//!@SYMTestPriority Medium
+//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server
+//! 2. Register the power notification callback
+//! 3. Call power attribute notification request API
+//! 4. Set the maximum sampling period to 20(same)
+//! 5. Wait for the notification till it stops
+//! 6. Change back the maximum sampling period to its old value
+//!@SYMTestExpectedResults Check the timeout error after the maximum sampling period
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_AdjustReportingPeriod_SameValueL
+END_TESTCASE DEVSRVS-HWRM-P-0025
+
+START_TESTCASE DEVSRVS-HWRM-P-0026
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0026
+//!@SYMComponent telephony_hwrm
+//!@SYMPREQ CR1833
+//!@SYMREQ REQ12254
+//!@SYMTestCaseDesc Verify the dynamic configuration of maximum sampling period.
+//!@SYMTestPriority Medium
+//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server
+//! 2. Register the power notification callback
+//! 3. Call power attribute notification request API
+//! 4. Set the maximum sampling period to a negative value
+//!@SYMTestExpectedResults Check the notification stops with KErrGeneral
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_AdjustReportingPeriod_NegativeValueL
+END_TESTCASE DEVSRVS-HWRM-P-0026
+
+START_TESTCASE DEVSRVS-HWRM-P-0027
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0027
+//!@SYMComponent telephony_hwrm
+//!@SYMPREQ CR1833
+//!@SYMREQ REQ12251
+//!@SYMTestCaseDesc Verify that the system queues the measurements and sent it to the client which are slow in processing each notification
+//!@SYMTestPriority High
+//!@SYMTestActions 1. Create power session
+//! 2. Register the callback for power notification
+//! 3. Introduce a delay of 200 millisec in the callback implementation
+//! 4. Start power notification
+//! 5. Stop the notification
+//!@SYMTestExpectedResults Check the notification receives multiple measurements
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_SlowClientL
+END_TESTCASE DEVSRVS-HWRM-P-0027
+
+START_TESTCASE DEVSRVS-HWRM-P-0028
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0028
+//!@SYMComponent telephony_hwrm
+//!@SYMPREQ CR1833
+//!@SYMREQ REQ12251
+//!@SYMTestCaseDesc Verify the system returns proper error code for notification request without callback
+//!@SYMTestPriority Medium
+//!@SYMTestActions 1. Create a power session
+//! 2. Start power notification
+//!@SYMTestExpectedResults KErrBadHandle error code
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_WithoutCallbackL
+END_TESTCASE DEVSRVS-HWRM-P-0028
+
+START_TESTCASE DEVSRVS-HWRM-P-0029
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0029
+//!@SYMComponent telephony_hwrm
+//!@SYMPREQ CR1833
+//!@SYMREQ REQ12251
+//!@SYMTestCaseDesc Verify the battery power notification from the system to multiple clients
+//!@SYMTestPriority Medium
+//!@SYMTestActions 1. Create two different power objects to mimic the multiple client session
+//! 2. Register the power notification callbacks
+//! 3. Call battery power notification request API for each power object. One client should request the notification with interval greater than the max sampling period.
+//! 4. Stop the request one by one after some time delay
+//!@SYMTestExpectedResults Check the power notification registered via the callback. Only one client among the two should get the notification.
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_MultiClient_DiffInterval_SpecialCaseL
+END_TESTCASE DEVSRVS-HWRM-P-0029
+
+START_TESTCASE DEVSRVS-HWRM-P-0030
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0030
+//!@SYMComponent telephony_hwrm
+//!@SYMPREQ CR1833
+//!@SYMREQ REQ12251
+//!@SYMTestCaseDesc Verify that the system returns proper error code for power notification cancellation
+//!@SYMTestPriority Medium
+//!@SYMTestActions 1. Create the power session
+//! 2. Call the cancel request API for power notification
+//!@SYMTestExpectedResults Check the request is completed without any error.
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_Stop_WithoutStartL
+END_TESTCASE DEVSRVS-HWRM-P-0030
+
+START_TESTCASE DEVSRVS-HWRM-P-0031
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0031
+//!@SYMComponent telephony_hwrm
+//!@SYMPREQ CR1833
+//!@SYMREQ REQ12251
+//!@SYMTestCaseDesc Verify the battery power notification from the system
+//!@SYMTestPriority Medium
+//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server
+//! 2. Register the power notification callback
+//! 3. Call power attribute notification request API
+//! 4. Stop the notification after some time delay which should be less than max sampling period
+//! 5. Send Stop notification again
+//!@SYMTestExpectedResults Check the battery power attributes reported via the registered callback. Check the second stop request is completed without any error.
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_Stop_RedundantL
+END_TESTCASE DEVSRVS-HWRM-P-0031
+
+START_TESTCASE DEVSRVS-HWRM-P-0032
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0032
+//!@SYMComponent telephony_hwrm
+//!@SYMPREQ CR1833
+//!@SYMREQ REQ12251
+//!@SYMTestCaseDesc Verify that the plug-in error code is passed back to the client
+//!@SYMTestPriority Medium
+//!@SYMTestActions 1. Create the power session
+//! 2. Set the expected command for the MockSy plugin to power notification request
+//! 3. Set the response package as error for the MockSy plugin
+//! 4. Call power notification request API
+//!@SYMTestExpectedResults Check the expected error code is receicved via the callback
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_Start_Set_PluginErrorL
+END_TESTCASE DEVSRVS-HWRM-P-0032
+
+START_TESTCASE DEVSRVS-HWRM-P-0033
+//!@SYMTestCaseID DEVSRVS-HWRM-P-0033
+//!@SYMComponent telephony_hwrm
+//!@SYMPREQ CR1833
+//!@SYMREQ REQ12254
+//!@SYMTestCaseDesc Verify the dynamic configuration of maximum sampling period.
+//!@SYMTestPriority Medium
+//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server
+//! 2. Register the power notification callback
+//! 3. Call power,voltage,consumption attribute notification request API
+//! 4. Set the maximum sampling period to a negative value
+//!@SYMTestExpectedResults Check the notification stops with KErrGeneral
+//!@SYMTestType CT
+RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_All_AdjustReportingPeriod_NegativeValueL
+END_TESTCASE DEVSRVS-HWRM-P-0033
+PRINT Completed te_hwrm_power tests