// Copyright (c) 2008-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

//

//! @file te_hwrm_power.script

//! @SYMTestSuiteName DEVSRVS-HWRM

//! @SYMScriptTestEnvironment telephony

LOAD_SUITE te_hwrm

START_TESTCASE DEVSRVS-HWRM-B-0001

//!@SYMTestCaseID DEVSRVS-HWRM-B-0001

//!@SYMComponent telephony_hwrm

//!@SYMTestCaseDesc Checking all basic power status are correct

//!@SYMTestPriority High

//!@SYMTestActions open power state sessions, checking battery level, battery status and charging status is correct

//!@SYMTestExpectedResults Pass

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerStatesL

END_TESTCASE DEVSRVS-HWRM-B-0001

START_TESTCASE DEVSRVS-HWRM-P-0002

//!@SYMTestCaseID DEVSRVS-HWRM-P-0002

//!@SYMComponent telephony_hwrm

//!@SYMTestCaseDesc Opens a Power Session

//!@SYMTestPriority High

//!@SYMTestActions Opens a Power Session

//!@SYMTestExpectedResults Pass

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerConnectL

END_TESTCASE DEVSRVS-HWRM-P-0002

START_TESTCASE DEVSRVS-HWRM-P-0003

//!@SYMTestCaseID DEVSRVS-HWRM-P-0003

//!@SYMComponent telephony_hwrm

//!@SYMTestCaseDesc Client gets Battery Info

//!@SYMTestPriority High

//!@SYMTestActions Open Power Session, issue GetBatteryInfo request. Results returned from the PowerMockSy are checked that are the expected.

//!@SYMTestExpectedResults Pass

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerGetBatteryInfoL

END_TESTCASE DEVSRVS-HWRM-P-0003

START_TESTCASE DEVSRVS-HWRM-P-0004

//!@SYMTestCaseID DEVSRVS-HWRM-P-0004

//!@SYMComponent telephony_hwrm

//!@SYMTestCaseDesc 3 clients get Battery Info.

//!@SYMTestPriority High

//!@SYMTestActions Open 3Power Sessions, issue one GetBatteryInfo request for each client. Results returned from the PowerMockSy are checked that are the expected for each of the clients.

//!@SYMTestExpectedResults Pass

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerGetBatteryInfoMultiClientL

END_TESTCASE DEVSRVS-HWRM-P-0004

START_TESTCASE DEVSRVS-HWRM-P-0005

//!@SYMTestCaseID DEVSRVS-HWRM-P-0005

//!@SYMComponent telephony_hwrm

//!@SYMTestCaseDesc Gets Battery Info and a plugin error occurs.

//!@SYMTestPriority High

//!@SYMTestActions Open Power Session, issue GetBatteryInfo request. Expected error is returned from the PowerMockSy.

//!@SYMTestExpectedResults Pass

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerGetBatteryInfoWithPluginErrorL

END_TESTCASE DEVSRVS-HWRM-P-0005

START_TESTCASE DEVSRVS-HWRM-P-0006

//!@SYMTestCaseID DEVSRVS-HWRM-P-0006

//!@SYMComponent telephony_hwrm

//!@SYMTestCaseDesc Client gets Battery Voltage Info

//!@SYMTestPriority High

//!@SYMTestActions Open Power Session, issue GetBatteryVoltageInfo request. Results returned from the PowerMockSy are checked that are the expected.

//!@SYMTestExpectedResults Pass

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerGetBatteryVoltageInfoL

END_TESTCASE DEVSRVS-HWRM-P-0006

START_TESTCASE DEVSRVS-HWRM-P-0007

//!@SYMTestCaseID DEVSRVS-HWRM-P-0007

//!@SYMComponent telephony_hwrm

//!@SYMTestCaseDesc 3 clients get Battery Voltage Info.

//!@SYMTestPriority High

//!@SYMTestActions Open 3Power Sessions, issue one GetBatteryInfo request for each client. Results returned from the PowerMockSy are checked that are the expected for each of the clients.

//!@SYMTestExpectedResults Pass

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerGetBatteryVoltageInfoMultiClientL

END_TESTCASE DEVSRVS-HWRM-P-0007

START_TESTCASE DEVSRVS-HWRM-P-0008

//!@SYMTestCaseID DEVSRVS-HWRM-P-0008

//!@SYMComponent telephony_hwrm

//!@SYMTestCaseDesc  Gets Battery Voltage Info and a plugin error occurs.

//!@SYMTestPriority High

//!@SYMTestActions Open Power Session, issue GetBatteryVoltageInfo request. Expected error is returned from the PowerMockSy.

//!@SYMTestExpectedResults Pass

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerGetBatteryVoltageInfoWithPluginErrorL

END_TESTCASE DEVSRVS-HWRM-P-0008

START_TESTCASE DEVSRVS-HWRM-P-0009

//!@SYMTestCaseID DEVSRVS-HWRM-P-0009

//!@SYMComponent telephony_hwrm

//!@SYMTestCaseDesc Gets Battery Base Interval used for measurements reporting.

//!@SYMTestPriority High

//!@SYMTestActions Open Power Session, request Base Time Interval (retrieved from Central Repository).

//!@SYMTestExpectedResults Pass

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerGetBaseTimeIntervalL

END_TESTCASE DEVSRVS-HWRM-P-0009

START_TESTCASE DEVSRVS-HWRM-P-0010

//!@SYMTestCaseID DEVSRVS-HWRM-P-0010

//!@SYMComponent telephony_hwrm

//!@SYMPREQ CR1833

//!@SYMREQ REQ12251 REQ12255 REQ12253 REQ12252

//!@SYMTestCaseDesc Verify the battery power notification from the system

//!@SYMTestPriority High

//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server

//!                2. Register the power notification callback

//!                3. Call power attribute notification request API

//!                4. Stop the notification after some time delay which should be less than max sampling period

//!@SYMTestExpectedResults Check the battery power attributes reported via the registered callback

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotifyL

END_TESTCASE DEVSRVS-HWRM-P-0010

START_TESTCASE DEVSRVS-HWRM-P-0011

//!@SYMTestCaseID DEVSRVS-HWRM-P-0011

//!@SYMComponent telephony_hwrm

//!@SYMPREQ CR1833

//!@SYMREQ REQ12251 REQ12255 REQ12253 REQ12252 REQ12254

//!@SYMTestCaseDesc Verify the duration of the power notification from the system

//!@SYMTestPriority High

//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server

//!                2. Register the power notification callback

//!                3. Set the maximum sampling period value to zero

//!                4. Call power attribute notification request API

//!                5. Stop the notification after 30msec time delay

//!@SYMTestExpectedResults Check the battery power attributes reported via the registered callback

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_InfiniteL

END_TESTCASE DEVSRVS-HWRM-P-0011

START_TESTCASE DEVSRVS-HWRM-P-0012

//!@SYMTestCaseID DEVSRVS-HWRM-P-0012

//!@SYMComponent telephony_hwrm

//!@SYMPREQ CR1833

//!@SYMREQ REQ12251 REQ12255 REQ12253 REQ12252 REQ12254

//!@SYMTestCaseDesc Verify the dynamic configuration of maximum sampling period.

//!@SYMTestPriority High

//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server

//!                2. Register the power notification callback

//!                3. Call power attribute notification request API

//!                4. Set the maximum sampling period to 30 sec

//!                5. Wait for the notification to stop after 30 sec over all.

//!                6. Change back the maximum sampling period to its old value

//!@SYMTestExpectedResults Check the timeout error after the maximum sampling period

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_AdjustReportingPeriodL

END_TESTCASE DEVSRVS-HWRM-P-0012

START_TESTCASE DEVSRVS-HWRM-P-0013

//!@SYMTestCaseID DEVSRVS-HWRM-P-0013

//!@SYMComponent telephony_hwrm

//!@SYMPREQ CR1833

//!@SYMREQ REQ12251 REQ12255 REQ12253 REQ12252

//!@SYMTestCaseDesc Verify the sampling interval accepted by the system

//!@SYMTestPriority High

//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server

//!                2. Register the power notification callback

//!                3. Call power attribute notification request API with a sampling interval greater than 10

//!                4. Stop the notification after some time delay

//!@SYMTestExpectedResults Check the battery power attributes reported via the registered callback

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_BigIntervalL

END_TESTCASE DEVSRVS-HWRM-P-0013

START_TESTCASE DEVSRVS-HWRM-P-0014

//!@SYMTestCaseID DEVSRVS-HWRM-P-0014

//!@SYMComponent telephony_hwrm

//!@SYMPREQ CR1833

//!@SYMREQ REQ12251

//!@SYMTestCaseDesc Verify the battery power notification from the system to multiple clients

//!@SYMTestPriority High

//!@SYMTestActions 1. Create three different power objects to mimic the multiple client session

//!                2. Register the power notification callbacks

//!                3. Call battery power notification request API for each power object

//!                4. Stop the request one by one after some time delay

//!@SYMTestExpectedResults Check the power notification registered via the callback

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_MultiClient_SameIntervalL

END_TESTCASE DEVSRVS-HWRM-P-0014

START_TESTCASE DEVSRVS-HWRM-P-0015

//!@SYMTestCaseID DEVSRVS-HWRM-P-0015

//!@SYMComponent telephony_hwrm

//!@SYMPREQ CR1833

//!@SYMREQ REQ12251

//!@SYMTestCaseDesc Verify the battery power notification from the system to multiple clients

//!@SYMTestPriority High

//!@SYMTestActions 1. Create three different power objects to mimic the multiple client session

//!                2. Register the power notification callbacks

//!                3. Call battery power notification request API for each power object

//!                4. Stop the request one by one after some time delay

//!@SYMTestExpectedResults Check the power notification registered via the callback

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_MultiClient_DiffIntervalL

END_TESTCASE DEVSRVS-HWRM-P-0015

START_TESTCASE DEVSRVS-HWRM-P-0016

//!@SYMTestCaseID DEVSRVS-HWRM-P-0016

//!@SYMComponent telephony_hwrm

//!@SYMPREQ CR1833

//!@SYMREQ REQ12251

//!@SYMTestCaseDesc Verify the system returns proper error code for the power notification request

//!@SYMTestPriority High

//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server

//!                2. Register the power notification callback

//!                3. Call power notification request API

//!                4. Call power notification request API again

//!@SYMTestExpectedResults The return error code at step 4 should be KErrAlreadyExists

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_RedundantL

END_TESTCASE DEVSRVS-HWRM-P-0016

START_TESTCASE DEVSRVS-HWRM-P-0017

//!@SYMTestCaseID DEVSRVS-HWRM-P-0017

//!@SYMComponent telephony_hwrm

//!@SYMPREQ CR1833

//!@SYMREQ REQ12251

//!@SYMTestCaseDesc Verify that the plug-in error code is passed back to the client

//!@SYMTestPriority Medium

//!@SYMTestActions 1. Create the power session

//!                2. Set the expected command for the MockSy plugin to power notification request

//!                3. Set the response package as error for the MockSy plugin

//!                4. Call power notification request API

//!@SYMTestExpectedResults Check the expected error code is receicved via the callback

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_Start_PluginErrorL

END_TESTCASE DEVSRVS-HWRM-P-0017

START_TESTCASE DEVSRVS-HWRM-P-0018

//!@SYMTestCaseID DEVSRVS-HWRM-P-0018

//!@SYMComponent telephony_hwrm

//!@SYMPREQ CR1833

//!@SYMREQ REQ12251

//!@SYMTestCaseDesc Verify that the notification cleanup is done by the system

//!@SYMTestPriority Medium

//!@SYMTestActions 1. Create the power session

//!                2. Call power notification request API

//!                3. Set the expected command for the MockSY plugin as stop power notification

//!                4. Set the response package as error for the MockSY plugin

//!                5. Call Stop power notification

//!@SYMTestExpectedResults Check the remaining results have been sent back to the client before cancelling the request

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_Stop_PluginErrorL

END_TESTCASE DEVSRVS-HWRM-P-0018

START_TESTCASE DEVSRVS-HWRM-P-0019

//!@SYMTestCaseID DEVSRVS-HWRM-P-0019

//!@SYMComponent telephony_hwrm

//!@SYMPREQ CR1833

//!@SYMREQ REQ12251

//!@SYMTestCaseDesc Verify the sampling interval accepted by the system

//!@SYMTestPriority High

//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server

//!                2. Register the power notification callback

//!                3. Call power attribute notification request API with a sampling interval 20

//!                4. Stop the notification after some time delay

//!@SYMTestExpectedResults Check atleast one battery power attributes reported via the registered callback

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_IntervalEqualL

END_TESTCASE DEVSRVS-HWRM-P-0019

START_TESTCASE DEVSRVS-HWRM-P-0020

//!@SYMTestCaseID DEVSRVS-HWRM-P-0020

//!@SYMComponent telephony_hwrm

//!@SYMPREQ CR1833

//!@SYMREQ REQ12251

//!@SYMTestCaseDesc Verify the sampling interval accepted by the system

//!@SYMTestPriority High

//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server

//!                2. Register the power notification callback

//!                3. Call power attribute notification request API with a sampling interval 50

//!@SYMTestExpectedResults Check the timeout error after the maximum sampling period

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_IntervalGreaterL

END_TESTCASE DEVSRVS-HWRM-P-0020

START_TESTCASE DEVSRVS-HWRM-P-0021

//!@SYMTestCaseID DEVSRVS-HWRM-P-0021

//!@SYMComponent telephony_hwrm

//!@SYMPREQ CR1833

//!@SYMREQ REQ12254

//!@SYMTestCaseDesc Verify the system accepts the new maximum sampling period

//!@SYMTestPriority High

//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server

//!                2. Register the power notification callback

//!                3. Change the maximum sampling period other than the old value

//!                4. Call power attribute notification request API

//!                5. Wait till the new time interval elapses

//!@SYMTestExpectedResults Check the timeout error after the new maximum sampling period

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_AdjustReportingPeriod_WithoutRequestL

END_TESTCASE DEVSRVS-HWRM-P-0021

START_TESTCASE DEVSRVS-HWRM-P-0022

//!@SYMTestCaseID DEVSRVS-HWRM-P-0022

//!@SYMComponent telephony_hwrm

//!@SYMPREQ CR1833

//!@SYMREQ REQ12254

//!@SYMTestCaseDesc Verify the dynamic configuration of maximum sampling period.

//!@SYMTestPriority Medium

//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server

//!                2. Register the power notification callback

//!                3. Call power attribute notification request API

//!                4. Set the maximum sampling period to 30 sec

//!                5. Wait for the notification to stop after 30 sec over all.

//!                6. Change back the maximum sampling period to its old value

//!@SYMTestExpectedResults Check the timeout error after the maximum sampling period

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_AdjustReportingPeriod_ElapsedTimeLessL

END_TESTCASE DEVSRVS-HWRM-P-0045

START_TESTCASE DEVSRVS-HWRM-P-0046

//!@SYMTestCaseID DEVSRVS-HWRM-P-0046

//!@SYMComponent telephony_hwrm

//!@SYMPREQ CR1833

//!@SYMREQ REQ12254

//!@SYMTestCaseDesc Verify the dynamic configuration of maximum sampling period.

//!@SYMTestPriority Medium

//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server

//!                2. Register the power notification callback

//!                3. Call power attribute notification request API

//!                4. Set the maximum sampling period to 10 sec after 10 sec

//!                5. Wait for the notification to stop. 

//!                6. Change back the maximum sampling period to its old value

//!@SYMTestExpectedResults Check the timeout error at step 5

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_AdjustReportingPeriod_ElapsedTimeMoreL

END_TESTCASE DEVSRVS-HWRM-P-0022

START_TESTCASE DEVSRVS-HWRM-P-0023

//!@SYMTestCaseID DEVSRVS-HWRM-P-0023

//!@SYMComponent telephony_hwrm

//!@SYMPREQ CR1833

//!@SYMREQ REQ12254

//!@SYMTestCaseDesc Verify the dynamic configuration of maximum sampling period.

//!@SYMTestPriority Medium

//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server

//!                2. Register the power notification callback

//!                3. Call power attribute notification request API

//!                4. Set the maximum sampling period to 0

//!                5. Wait for the notification till 2 mins then stop it 

//!                6. Change back the maximum sampling period to its old value

//!@SYMTestExpectedResults Check the notification does not stop

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_AdjustReportingPeriod_NonZeroToZeroL

END_TESTCASE DEVSRVS-HWRM-P-0023

START_TESTCASE DEVSRVS-HWRM-P-0024

//!@SYMTestCaseID DEVSRVS-HWRM-P-0024

//!@SYMComponent telephony_hwrm

//!@SYMPREQ CR1833

//!@SYMREQ REQ12254

//!@SYMTestCaseDesc Verify the dynamic configuration of maximum sampling period.

//!@SYMTestPriority Medium

//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server

//!                2. Register the power notification callback

//!                3. Call power attribute notification request API

//!                4. Set the maximum sampling period to 0

//!                5. Wait for the notification till 2 minst 

//!                6. Change back the maximum sampling period to its old value7. Wait for the notification to stop after 20 sec

//!@SYMTestExpectedResults Check the timeout error after the maximum sampling period at state 7

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_AdjustReportingPeriod_ZeroToNonZeroL

END_TESTCASE DEVSRVS-HWRM-P-0024

START_TESTCASE DEVSRVS-HWRM-P-0025

//!@SYMTestCaseID DEVSRVS-HWRM-P-0025

//!@SYMComponent telephony_hwrm

//!@SYMPREQ CR1833

//!@SYMREQ REQ12254

//!@SYMTestCaseDesc Verify the dynamic configuration of maximum sampling period.

//!@SYMTestPriority Medium

//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server

//!                2. Register the power notification callback

//!                3. Call power attribute notification request API

//!                4. Set the maximum sampling period to 20(same)

//!                5. Wait for the notification till it stops 

//!                6. Change back the maximum sampling period to its old value

//!@SYMTestExpectedResults Check the timeout error after the maximum sampling period

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_AdjustReportingPeriod_SameValueL

END_TESTCASE DEVSRVS-HWRM-P-0025

START_TESTCASE DEVSRVS-HWRM-P-0026

//!@SYMTestCaseID DEVSRVS-HWRM-P-0026

//!@SYMComponent telephony_hwrm

//!@SYMPREQ CR1833

//!@SYMREQ REQ12254

//!@SYMTestCaseDesc Verify the dynamic configuration of maximum sampling period.

//!@SYMTestPriority Medium

//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server

//!                2. Register the power notification callback

//!                3. Call power attribute notification request API

//!                4. Set the maximum sampling period to a negative value

//!@SYMTestExpectedResults Check the notification stops with KErrGeneral

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_AdjustReportingPeriod_NegativeValueL

END_TESTCASE DEVSRVS-HWRM-P-0026

START_TESTCASE DEVSRVS-HWRM-P-0027

//!@SYMTestCaseID DEVSRVS-HWRM-P-0027

//!@SYMComponent telephony_hwrm

//!@SYMPREQ CR1833

//!@SYMREQ REQ12251

//!@SYMTestCaseDesc Verify that the system queues the measurements and sent it to the client which are slow in processing each notification

//!@SYMTestPriority High

//!@SYMTestActions 1. Create power session

//!                2. Register the callback for power notification

//!                3. Introduce a delay of 200 millisec in the callback implementation

//!                4. Start power notification

//!                5. Stop the notification

//!@SYMTestExpectedResults Check the notification receives multiple measurements

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_SlowClientL

END_TESTCASE DEVSRVS-HWRM-P-0027

START_TESTCASE DEVSRVS-HWRM-P-0028

//!@SYMTestCaseID DEVSRVS-HWRM-P-0028

//!@SYMComponent telephony_hwrm

//!@SYMPREQ CR1833

//!@SYMREQ REQ12251

//!@SYMTestCaseDesc Verify the system returns proper error code for notification request without callback

//!@SYMTestPriority Medium

//!@SYMTestActions 1. Create a power session

//!                2. Start power notification

//!@SYMTestExpectedResults KErrBadHandle error code

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_WithoutCallbackL

END_TESTCASE DEVSRVS-HWRM-P-0028

START_TESTCASE DEVSRVS-HWRM-P-0029

//!@SYMTestCaseID DEVSRVS-HWRM-P-0029

//!@SYMComponent telephony_hwrm

//!@SYMPREQ CR1833

//!@SYMREQ REQ12251

//!@SYMTestCaseDesc Verify the battery power notification from the system to multiple clients

//!@SYMTestPriority Medium

//!@SYMTestActions 1. Create two different power objects to mimic the multiple client session

//!                2. Register the power notification callbacks

//!                3. Call battery power notification request API for each power object. One client should request the notification with interval greater than the max sampling period.

//!                4. Stop the request one by one after some time delay

//!@SYMTestExpectedResults Check the power notification registered via the callback. Only one client among the two should get the notification.

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_MultiClient_DiffInterval_SpecialCaseL

END_TESTCASE DEVSRVS-HWRM-P-0029

START_TESTCASE DEVSRVS-HWRM-P-0030

//!@SYMTestCaseID DEVSRVS-HWRM-P-0030

//!@SYMComponent telephony_hwrm

//!@SYMPREQ CR1833

//!@SYMREQ REQ12251

//!@SYMTestCaseDesc Verify that the system returns proper error code for power notification cancellation

//!@SYMTestPriority Medium

//!@SYMTestActions 1. Create the power session

//!                2. Call the cancel request API for power notification

//!@SYMTestExpectedResults Check the request is completed without any error.

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_Stop_WithoutStartL

END_TESTCASE DEVSRVS-HWRM-P-0030

START_TESTCASE DEVSRVS-HWRM-P-0031

//!@SYMTestCaseID DEVSRVS-HWRM-P-0031

//!@SYMComponent telephony_hwrm

//!@SYMPREQ CR1833

//!@SYMREQ REQ12251

//!@SYMTestCaseDesc Verify the battery power notification from the system

//!@SYMTestPriority Medium

//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server

//!                2. Register the power notification callback

//!                3. Call power attribute notification request API

//!                4. Stop the notification after some time delay which should be less than max sampling period

//!                5. Send Stop notification again

//!@SYMTestExpectedResults Check the battery power attributes reported via the registered callback. Check the second stop request is completed without any error.

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_Stop_RedundantL

END_TESTCASE DEVSRVS-HWRM-P-0031

START_TESTCASE DEVSRVS-HWRM-P-0032

//!@SYMTestCaseID DEVSRVS-HWRM-P-0032

//!@SYMComponent telephony_hwrm

//!@SYMPREQ CR1833

//!@SYMREQ REQ12251

//!@SYMTestCaseDesc Verify that the plug-in error code is passed back to the client

//!@SYMTestPriority Medium

//!@SYMTestActions 1. Create the power session

//!                2. Set the expected command for the MockSy plugin to power notification request

//!                3. Set the response package as error for the MockSy plugin

//!                4. Call power notification request API

//!@SYMTestExpectedResults Check the expected error code is receicved via the callback

//!@SYMTestType CT

RUN_TEST_STEP 100 te_hwrm TEFUnit.CHWRMTest.TestPowerNotify_Start_Set_PluginErrorL

END_TESTCASE DEVSRVS-HWRM-P-0032

START_TESTCASE DEVSRVS-HWRM-P-0033

//!@SYMTestCaseID DEVSRVS-HWRM-P-0033

//!@SYMComponent telephony_hwrm

//!@SYMPREQ CR1833

//!@SYMREQ REQ12254

//!@SYMTestCaseDesc Verify the dynamic configuration of maximum sampling period.

//!@SYMTestPriority Medium

//!@SYMTestActions 1. Create a CHWRMPower object to open a session with HWRM server

//!                2. Register the power notification callback

//!                3. Call power,voltage,consumption attribute notification request API

//!                4. Set the maximum sampling period to a negative value

//!@SYMTestExpectedResults Check the notification stops with KErrGeneral