// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of the License "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

// @file PBASE-T_USBDI-0500.cpp

// @internalComponent

// 

//

#include "PBASE-T_USBDI-0500.h"

#include "testpolicy.h"

#include "modelleddevices.h"

#include "testliterals.h"

namespace NUnitTesting_USBDI

	{

const TInt KBulkMaxINTransferSize = 600;

const TInt KDeviceNumWriteBytesPreHalt = 256;

const TUint KHostNumReadBytesPreHalt1 = 512;

const TUint KHostNumReadBytesPreHalt2 = 512;

const TUint KHostNumReadBytesPostHalt1 = 256;

const TUint KHostNumReadBytesPostHalt2 = 257;

const TInt KDeviceNumWriteBytesPostHalt = 512;

//Make these single bit values ... 

// ... so that their completion can be easily recorded in a bit mask!

const TInt KBulkTransferInId0 = 1<<0;

const TInt KBulkTransferInId1 = 1<<4;

const TInt KUnexpectedTransferID = -101;

const TInt KUndefinedStep	 	 = -102;

_LIT(KTestCaseId,"PBASE-T_USBDI-0500");

const TFunctorTestCase<CUT_PBASE_T_USBDI_0500,TBool> CUT_PBASE_T_USBDI_0500::iFunctor(KTestCaseId);	

CUT_PBASE_T_USBDI_0500* CUT_PBASE_T_USBDI_0500::NewL(TBool aHostRole)

	{

	CUT_PBASE_T_USBDI_0500* self = new (ELeave) CUT_PBASE_T_USBDI_0500(aHostRole);

	CleanupStack::PushL(self);

	self->ConstructL();

	CleanupStack::Pop(self);

	return self;

	}

CUT_PBASE_T_USBDI_0500::CUT_PBASE_T_USBDI_0500(TBool aHostRole)

:	CBaseBulkTestCase(KTestCaseId,aHostRole),

	iCaseStep(EInProgress)

	{

	} 

void CUT_PBASE_T_USBDI_0500::ConstructL()

	{

	BaseBulkConstructL();

	}

CUT_PBASE_T_USBDI_0500::~CUT_PBASE_T_USBDI_0500()

	{

	}

void CUT_PBASE_T_USBDI_0500::Ep0TransferCompleteL(TInt aCompletionCode)

	{

	if(aCompletionCode != KErrNone)

		{

		if(iCaseStep == EFailed)

			{// ignore error, nad catch the TestFailed method called further down.

			}

		else

			{

			TBuf<256> msg;

			msg.Format(_L("<Error %d> Transfer to control endpoint 0 was not successful"),aCompletionCode);

			iCaseStep = EFailed;

			TTestCaseFailed request(aCompletionCode,msg);

			iControlEp0->SendRequest(request,this);

			return;

			}

		}

	switch(iCaseStep)

		{

		// Test case passed

		case EPassed:

			TestPassed();

			break;

		// Test case failed	

		case EFailed:

			TestFailed(KErrCompletion);

			break;

		case ETransferInHalt:

			iInTransfer[0]->TransferIn(KHostNumReadBytesPreHalt1);

			iInTransfer[1]->TransferIn(KHostNumReadBytesPreHalt2);

			break;

		case ETransferIn:

			iInTransfer[0]->TransferIn(KHostNumReadBytesPostHalt1);

			iInTransfer[1]->TransferIn(KHostNumReadBytesPostHalt2);

			break;

		default:

			TestFailed(KErrUnknown);

			break;

		}

	}

void CUT_PBASE_T_USBDI_0500::TransferCompleteL(TInt aTransferId,TInt aCompletionCode)

	{

	Cancel();

	TInt err(KErrNone);

	TBuf<256> msg;

	switch(iCaseStep)

		{

		case ETransferInHalt:

			{

			if(aCompletionCode != KErrUsbStalled)

				{

				iInTransfer[0]->Cancel();

				iInTransfer[1]->Cancel();

				err = KErrCorrupt;

				msg.Format(_L("<Error %d> The transfer completed with no errors but the endpoint should have halted"),aCompletionCode);

				break; //switch(iCaseStep)

				}

			switch(aTransferId)

				{

				case KBulkTransferInId0:

				case KBulkTransferInId1:

					iTransferComplete |= aTransferId;

					break; //switch(aTransferId)

				default:

					iTransferComplete = 0; //reset

					err = KUnexpectedTransferID;

					msg.Format(_L("<Error %d> Unexpected transfer ID, wanted %d or %d, got %d"),

							       err, KBulkTransferInId0, KBulkTransferInId1, aTransferId);

					break; //switch(aTransferId)

				}

			if(err==KErrNone && iTransferComplete == (KBulkTransferInId0 | KBulkTransferInId1))

				{

				iTransferComplete = 0; //reset

				// Acknowledge the stall and clear				

				err = iTestPipeInterface1BulkIn.ClearRemoteStall();

				if(err != KErrNone)

					{

					msg.Format(_L("<Error %d> The remote stall cannot be cleared"),err);

					break; //switch(iCaseStep)

					}

				iCaseStep = ETransferIn;

				TEndpointPatternSynchronousWriteRequest request(1,1, KLiteralEnglish8().Mid(0,KDeviceNumWriteBytesPostHalt), KDeviceNumWriteBytesPostHalt);// EP1 because 1st writter EP

				iControlEp0->SendRequest(request,this);	

				}

			}

			break; //switch(iCaseStep)

		case ETransferIn:

			{

			if(aCompletionCode != KErrNone)

				{

				iInTransfer[0]->Cancel();

				iInTransfer[1]->Cancel();

				err = KErrCorrupt;			

				msg.Format(_L("<Error %d> No data sent on bulk IN request"),aCompletionCode);

				break; //switch(iCaseStep)

				}

			switch(aTransferId)

				{

				case KBulkTransferInId0:

				case KBulkTransferInId1:

					iTransferComplete |= aTransferId;

					break; //switch(aTransferId)

				default:

					iTransferComplete = 0; //reset

					err = KUnexpectedTransferID;

					msg.Format(_L("<Error %d> Unexpected transfer ID, wanted %d or %d, got %d"),

							       err, KBulkTransferInId0, KBulkTransferInId1, aTransferId);

					break; //switch(aTransferId)

				}

			if(err==KErrNone && iTransferComplete == (KBulkTransferInId0 | KBulkTransferInId1))

				{

				// ok, compare data rcvd now

				iTransferComplete = 0; //reset

				TPtrC8 data1(iInTransfer[0]->DataPolled());		

				TPtrC8 data2(iInTransfer[1]->DataPolled());		

				//Validate first transfer for number of bytes requested.

				if(ValidateData(data1, KLiteralEnglish8(), KHostNumReadBytesPostHalt1) == EFalse)

					{

					err = KErrCompletion; //indicates data validation failure

					break; //switch(iCaseStep)

					}

				//Validate second transfer for the remainder of bytes that the device should have written.

				//NB The number of bytes requested is more than this remainder to accommodate the ZLP.

				if(ValidateData(data2, KLiteralEnglish8(), KHostNumReadBytesPostHalt1, KDeviceNumWriteBytesPostHalt-KHostNumReadBytesPostHalt1) == EFalse)

					{

					err = KErrCompletion; //indicates data validation failure

					break; //switch(iCaseStep)

					}

				// Comparison is a match

				iCaseStep = EPassed;

				TTestCasePassed request;

				iControlEp0->SendRequest(request,this);

				}

			}

			break; //switch(iCaseStep)

		default:

			err = KUndefinedStep;

			msg.Format(_L("<Error %d> Undefined case step %d reached"),KUndefinedStep, iCaseStep);

			break; //switch(iCaseStep)

		}

	if(err == KErrCompletion)

		//indicates data validation failure

		{

		msg.Format(_L("<Error %d> Bulk transfer IN data received does not match Bulk Transfer OUT data"), err);

		}

	if(err!=KErrNone)

		{	

		iCaseStep = EFailed;

		TTestCaseFailed request(err,msg);

		return iControlEp0->SendRequest(request,this);

		}	

	}

void CUT_PBASE_T_USBDI_0500::DeviceInsertedL(TUint aDeviceHandle)

	{

	Cancel();

	TBuf<256> msg;

	TInt err = KErrNone;

	if(BaseBulkDeviceInsertedL(aDeviceHandle, EFalse) == EDeviceConfigurationError)

		// Prepare for response from control transfer to client

		{

		err = KErrGeneral;

		msg.Format(_L("Base class DeviceInsertedL failed"));

		}

	else

		{

		iInTransfer[0] = new (ELeave) CBulkTransfer(iTestPipeInterface1BulkIn,iUsbInterface1,KBulkMaxINTransferSize,*this,KBulkTransferInId0);

		iInTransfer[1] = new (ELeave) CBulkTransfer(iTestPipeInterface1BulkIn,iUsbInterface1,KBulkMaxINTransferSize,*this,KBulkTransferInId1);

		// Initialise the descriptors for transfer		

		err = iUsbInterface1.InitialiseTransferDescriptors();

		if(err != KErrNone)

			{

			msg.Format(_L("<Error %d> Unable to initialise transfer descriptors"),err);

			}

		}

	if(err != KErrNone)

		{

		iCaseStep = EFailed;

		TTestCaseFailed request(err,msg);

		iControlEp0->SendRequest(request,this);

		}

	else

		{

		iCaseStep = ETransferInHalt;	

		TEndpointPatternSynchronousWriteAndHaltRequest request(1,1,KLiteralFrench4(),KDeviceNumWriteBytesPreHalt);// EP1 means endpoint index 1 not the actual endpoint number

		iControlEp0->SendRequest(request,this);

		}

	}

	} //end namespace