// Copyright (c) 2008-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of the License "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

// e32\nkernsmp\arm\nctimer.cia

// Fast Millisecond Timer Implementation

// 

//

#include <e32cia.h>

#include <arm.h>

#ifdef __MSTIM_MACHINE_CODED__

#ifdef _DEBUG

#define ASM_KILL_LINK(rp,rs)	asm("mov "#rs", #0xdf ");\

								asm("orr "#rs", "#rs", "#rs", lsl #8 ");\

								asm("orr "#rs", "#rs", "#rs", lsl #16 ");\

								asm("str "#rs", ["#rp"] ");\

								asm("str "#rs", ["#rp", #4] ");

#define ASM_KILL_LINK_OFFSET(rp,rs,offset)	asm("mov "#rs", #0xdf ");\

											asm("orr "#rs", "#rs", "#rs", lsl #8 ");\

											asm("orr "#rs", "#rs", "#rs", lsl #16 ");\

											asm("str "#rs", ["#rp", #"#offset"] ");\

											asm("str "#rs", ["#rp", #"#offset"+4] ");

#else

#define ASM_KILL_LINK(rp,rs)

#define ASM_KILL_LINK_OFFSET(rp,rs,offset)

#endif

#ifdef _DEBUG

#define __DEBUG_CALLBACK(n)	asm("stmfd sp!, {r0-r3,r12,lr} ");		\

							asm("ldr r0, __TheTimerQ ");			\

							asm("ldr r12, [r0, #%a0]!" : : "i" _FOFF(NTimerQ,iDebugFn));	\

							asm("cmp r12, #0 ");					\

							asm("movne r1, #" #n );					\

							asm("ldrne r0, [r0, #4] ");				\

							asm("movne lr, pc ");					\

							__JUMP(ne,r12);							\

							asm("ldmfd sp!, {r0-r3,r12,lr} ")

#else

#define __DEBUG_CALLBACK(n)

#endif

/** Start a nanokernel timer in zero-drift periodic mode with ISR or DFC callback.

	Queues the timer to expire in the specified number of nanokernel ticks,

	measured from the time at which it last expired. This allows exact periodic

	timers to be implemented with no drift caused by delays in requeueing the

	timer.

	The expiry handler will be called in the same context as the previous timer

	expiry. Generally the way this is used is that NTimer::OneShot() is used to start 

	the first time interval and this specifies whether the callback is in ISR context 

	or in the context of the nanokernel timer thread (DfcThread1) or other Dfc thread.

	The expiry handler then uses NTimer::Again() to requeue the timer.

	@param	aTime Timeout in nanokernel ticks

	@return	KErrNone if no error

	@return	KErrInUse if timer is already active

	@return	KErrArgument if the requested expiry time is in the past

	@pre	Any context

 */

__NAKED__ EXPORT_C TInt NTimer::Again(TInt /*aTime*/)

	{

	asm("mrs r12, cpsr ");

	INTS_OFF(r3, r12, INTS_ALL_OFF);	// all interrupts off

	asm("ldrb r3, [r0, #%a0]" : : "i" _FOFF(NTimer,iState));		// r3=iState

	asm("ldr r2, __TheTimerQ ");

	asm("cmp r3, #%a0" : : "i" ((TInt)EIdle));

	asm("ldreq r3, [r0, #%a0]" : : "i" _FOFF(NTimer,iTriggerTime));	// r3=iTriggerTime

	asm("bne add_mscb_in_use ");		// if already queued return KErrInUse

	asm("add r3, r3, r1 ");				// add requested time interval

	asm("ldr r1, [r2, #%a0]" : : "i" _FOFF(NTimerQ,iMsCount));		// r1=iMsCount

	asm("subs r1, r3, r1 ");			// r1=trigger time-next tick time

	asm("strpl r3, [r0, #%a0]" : : "i" _FOFF(NTimer,iTriggerTime));	// iTriggerTime+=aTime

	asm("bpl AddMsCallBack ");			// if time interval positive, ok

	asm("mov r0, #%a0" : : "i" ((TInt)KErrArgument));	// else return KErrArgument

	asm("b add_mscb_0 ");

	}

/** Start a nanokernel timer in one-shot mode with ISR callback.

	Queues the timer to expire in the specified number of nanokernel ticks. The

	actual wait time will be at least that much and may be up to one tick more.

	The expiry handler will be called in ISR context.

	@param	aTime Timeout in nanokernel ticks

	@return	KErrNone if no error

	@return	KErrInUse if timer is already active

	@pre	Any context

 */

__NAKED__ EXPORT_C TInt NTimer::OneShot(TInt /*aTime*/)

	{

	asm("mov r2, #0 ");

	// fall through

	}

/** Start a nanokernel timer in one-shot mode with ISR or DFC callback.

	Queues the timer to expire in the specified number of nanokernel ticks. The

	actual wait time will be at least that much and may be up to one tick more.

	The expiry handler will be called in either ISR context or in the context

	of the nanokernel timer thread (DfcThread1).

	@param	aTime Timeout in nanokernel ticks

	@param	aDfc TRUE if DFC callback required, FALSE if ISR callback required.

	@return	KErrNone if no error

	@return	KErrInUse if timer is already active

	@pre	Any context

 */

__NAKED__ EXPORT_C TInt NTimer::OneShot(TInt /*aTime*/, TBool /*aDfc*/)

	{

	asm("mrs r12, cpsr ");

	INTS_OFF(r3, r12, INTS_ALL_OFF);	// all interrupts off

	asm("ldrb r3, [r0, #%a0]" : : "i" _FOFF(NTimer,iState));		// r3=iState

	asm("cmp r3, #%a0" : : "i" ((TInt)EIdle));

	asm("bne add_mscb_in_use ");		// if already queued return KErrInUse

	asm("strb r2, [r0, #%a0]" : : "i" _FOFF(NTimer,iCompleteInDfc));	// iCompleteInDfc=aDfc

	asm("ldr r2, __TheTimerQ ");

	asm("ldr r3, [r2, #%a0]" : : "i" _FOFF(NTimerQ,iMsCount));	// r3=iMsCount

	asm("add r3, r3, r1 ");

	asm("str r3, [r0, #%a0]" : : "i" _FOFF(NTimer,iTriggerTime));	// iTriggerTime=ms count + aTime

	// r0->CallBack, r2=TheTimerQ, r1=time interval, r3=trigger time

	asm("AddMsCallBack: ");

	asm("cmp r1, #32 ");				// compare interval with 32ms

	asm("bge add_mscb_holding ");		// if >=32ms put it on holding queue

	asm("ldrb r1, [r0, #%a0]" : : "i" _FOFF(NTimer,iCompleteInDfc));	// r1=iCompleteInDfc

	asm("and r3, r3, #0x1f ");			// r3=trigger time & 0x1f

	asm("cmp r1, #0 ");

	asm("add r1, r2, r3, lsl #4 ");		// r1->IntQ corresponding to trigger time

	asm("addne r1, r1, #8 ");			// if (iCompleteInDfc), r1 points to DfcQ

	asm("ldr r3, [r1, #4] ");			// r3=pQ->iA.iPrev

	asm("str r0, [r1, #4] ");			// pQ->iA.iPrev=pC

	asm("str r0, [r3, #0] ");			// pQ->iA.iPrev->iNext=pC

	asm("stmia r0, {r1,r3} ");			// pC->iNext=&pQ->iA, pC->iPrev=pQ->iA.iPrev

	asm("mov r1, #%a0" : : "i" ((TInt)EFinal));

	asm("strb r1, [r0, #%a0]" : : "i" _FOFF(NTimer,iState));		// iState=EFinal

	asm("ldr r0, [r0, #%a0]" : : "i" _FOFF(NTimer,iTriggerTime));	// r0=iTriggerTime

	asm("ldr r3, [r2, #%a0]" : : "i" _FOFF(NTimerQ,iPresent));	// r3=TheTimerQ->iPresent

	asm("and r0, r0, #0x1f ");

	asm("mov r1, #1 ");

	asm("orr r3, r3, r1, lsl r0 ");		// iPresent |= (1<<index)

	asm("str r3, [r2, #%a0]" : : "i" _FOFF(NTimerQ,iPresent));

	asm("mov r0, #0 ");					// return KErrNone

	asm("msr cpsr, r12 ");

	__JUMP(,lr);

	asm("add_mscb_holding: ");

	asm("ldr r3, [r2, #%a0]!" : : "i" _FOFF(NTimerQ,iHoldingQ.iA.iPrev));	// r3=pQ->iPrev, r2=&iHoldingQ.iA.iPrev

	asm("mov r1, #%a0" : : "i" ((TInt)EHolding));

	asm("strb r1, [r0, #%a0]" : : "i" _FOFF(NTimer,iState));	// iState=EHolding

	asm("str r0, [r2], #-4 ");			// pQ->iPrev=pC, r2=&iHoldingQ

	asm("str r0, [r3, #0] ");			// pQ->iPrev->iNext=pC

	asm("stmia r0, {r2,r3} ");			// pC->iNext=pQ, pC->iPrev=pQ->iPrev

	asm("mov r0, #0 ");					// return KErrNone

	asm("add_mscb_0: ");

	asm("msr cpsr, r12 ");

	__JUMP(,lr);

	asm("add_mscb_in_use: ");

	asm("mov r0, #%a0" : : "i" ((TInt)KErrInUse));		// return KErrInUse

	asm("msr cpsr, r12 ");

	__JUMP(,lr);

	asm("__TheTimerQ: ");

	asm(".word TheTimerQ ");

	}

/** Starts a nanokernel timer in one-shot mode with callback in dfc thread that provided DFC belongs to.

	Queues the timer to expire in the specified number of nanokernel ticks. The

	actual wait time will be at least that much and may be up to one tick more.

	On expiry aDfc will be queued in ISR context.

    Note that NKern::TimerTicks() can be used to convert milliseconds to ticks.

	@param	aTime Timeout in nanokernel ticks

	@param	aDfc - Dfc to be queued when the timer expires.

	@return	KErrNone if no error; KErrInUse if timer is already active.

	@pre	Any context

	@see    NKern::TimerTicks()

 */

__NAKED__ EXPORT_C TInt NTimer::OneShot(TInt /*aTime*/, TDfc& /*aDfc*/)

	{

	asm("mrs r12, cpsr ");

	INTS_OFF(r3, r12, INTS_ALL_OFF);	// all interrupts off

	asm("ldrb r3, [r0, #%a0]" : : "i" _FOFF(NTimer,iState));		// r3=iState

	asm("cmp r3, #%a0" : : "i" ((TInt)EIdle));

	asm("bne add_mscb_in_use ");		// if already queued return KErrInUse

	asm("mov r3, #0 ");

	asm("strb r3, [r0, #%a0]" : : "i" _FOFF(NTimer,iCompleteInDfc));	// iCompleteInDfc=0

	asm("str r3,  [r0, #%a0]" : : "i" _FOFF(NTimer,iFunction));			// iFunction=NULL

	asm("str r2,  [r0, #%a0]" : : "i" _FOFF(NTimer,iPtr));				// iPtr= &aDfc

	asm("ldr r2, __TheTimerQ ");

	asm("ldr r3, [r2, #%a0]" : : "i" _FOFF(NTimerQ,iMsCount));	// r3=iMsCount

	asm("add r3, r3, r1 ");

	asm("str r3, [r0, #%a0]" : : "i" _FOFF(NTimer,iTriggerTime));	// iTriggerTime=ms count + aTime

	asm("b AddMsCallBack ");

	}

/** Cancel a nanokernel timer.

	Removes this timer from the nanokernel timer queue. Does nothing if the

	timer is inactive or has already expired.

	Note that if the timer was queued and DFC callback requested it is possible

	for the expiry handler to run even after Cancel() has been called. This will

	occur in the case where DfcThread1 is preempted just before calling the

	expiry handler for this timer and the preempting thread/ISR/IDFC calls

	Cancel() on the timer.

	@pre	Any context

 */

EXPORT_C __NAKED__ void NTimer::Cancel()

	{

	asm("mrs r12, cpsr ");

	INTS_OFF(r3, r12, INTS_ALL_OFF);	// all interrupts off

	asm("ldrb r3, [r0, #%a0]" : : "i" _FOFF(NTimer,iState));

	asm("mov r1, #0 ");

	asm("cmp r3, #%a0" : : "i" ((TInt)ETransferring));

	asm("bcc cancel_idle ");			// if EIdle, nothing to do

	asm("strb r1, [r0, #%a0]" : : "i" _FOFF(NTimer,iState));	// iState=EIdle

	asm("beq cancel_xfer ");			// if ETransferring, branch

	asm("ldmia r0, {r1,r2} ");			// If queued, dequeue - r1=next, r2=prev

	asm("cmp r3, #%a0" : : "i" ((TInt)ECritical));

	asm("str r1, [r2, #0] ");			// if queued, prev->next=next

	asm("str r2, [r1, #4] ");			// and next->prev=prev

	ASM_KILL_LINK(r0,r1);

	asm("ldrcs r1, __TheTimerQ ");

	asm("ldrhi r0, [r0, #%a0]" : : "i" _FOFF(NTimer,iTriggerTime));	// r0=iTriggerTime

	asm("ldrhi r3, [r1, #%a0]" : : "i" _FOFF(NTimerQ,iMsCount));	// r3=iMsCount

	asm("bcc cancel_idle ");			// if EHolding or EOrdered, finished

	asm("beq cancel_critical ");		// if ECritical, branch

										// r1->ms timer, state was EFinal

	asm("subs r3, r0, r3 ");			// r3=trigger time - next tick

	asm("bmi cancel_idle ");			// if trigger time already expired, don't touch iPresent (was on iCompletedQ)

	asm("and r0, r0, #0x1f ");			// r0=iTriggerTime&0x1f = queue index

	asm("mov r3, r1 ");

	asm("ldr r2, [r3, r0, lsl #4]! ");	// r3->iIntQ for this timer, r2=iIntQ head pointer

	asm("cmp r2, r3 ");

	asm("bne cancel_idle ");			// iIntQ not empty so finished

	asm("ldr r2, [r3, #8]! ");			// r2=iDfcQ head pointer

	asm("cmp r2, r3 ");

	asm("bne cancel_idle ");			// iDfcQ not empty so finished

	asm("ldr r2, [r1, #%a0]" : : "i" _FOFF(NTimerQ,iPresent));	// r2=TheTimerQ->iPresent

	asm("mov r3, #1 ");

	asm("bic r2, r2, r3, lsl r0 ");		// iPresent &= ~(1<<index)

	asm("str r2, [r1, #%a0]" : : "i" _FOFF(NTimerQ,iPresent));

	asm("cancel_idle: ");

	asm("msr cpsr, r12 ");

	__JUMP(,lr);

	asm("cancel_xfer: ");

	asm("ldr r1, __TheTimerQ ");		// r1->ms timer, state was ETransferring

	asm("strb r3, [r1, #%a0]" : : "i" _FOFF(NTimerQ,iTransferringCancelled));

	asm("msr cpsr, r12 ");

	__JUMP(,lr);

	asm("cancel_critical: ");			// r1->ms timer, state was ECritical

	asm("strb r3, [r1, #%a0]" : : "i" _FOFF(NTimerQ,iCriticalCancelled));

	asm("msr cpsr, r12 ");

	__JUMP(,lr);

	}

/** Return the number of ticks before the next nanokernel timer expiry.

	May on occasion return a pessimistic estimate (i.e. too low).

	Used by base port to disable the system tick interrupt when the system

	is idle.

	@return	The number of ticks before the next nanokernel timer expiry.

	@pre	Interrupts must be disabled.

	@post	Interrupts are disabled.

 */

EXPORT_C __NAKED__ TInt NTimerQ::IdleTime()

	{

	ASM_CHECK_PRECONDITIONS(MASK_INTERRUPTS_DISABLED);

	asm("ldr r12, __TheTimerQ ");

	asm("mvn r0, #0x80000000 ");		// set r0=KMaxTInt initially

	asm("ldr r2, [r12, #%a0]!" : : "i" _FOFF(NTimerQ,iOrderedQ));	// r12->iOrderedQ, r2=iOrderedQ first

	asm("ldr r3, [r12, #-12] ");		// r3=next tick number

	asm("cmp r2, r12 ");				// check if iOrderedQ empty

	asm("ldrne r0, [r2, #%a0]" : : "i" _FOFF(NTimer,iTriggerTime));	// if not, r0=ordered Q first->trigger time

	asm("ldr r1, [r12, #-8]! ");		// r1=iHoldingQ first, r12->iHoldingQ

	asm("bicne r0, r0, #0x0f ");

	asm("subne r0, r0, #16 ");			// r0=tick at which transfer to final queue would occur

	asm("subne r0, r0, r3 ");			// return value = trigger time - iMsCount

	asm("cmp r1, r12 ");				// holding Q empty?

	asm("ldr r1, [r12, #-8] ");			// r1=iPresent

	asm("and r12, r3, #0x1f ");			// r12=next tick mod 32

	asm("beq 1f ");						// branch if holding Q empty

	asm("ands r2, r3, #0x0f ");			// else r2=next tick no. mod 16

	asm("rsbne r2, r2, #16 ");			// if nonzero, subtract from 16 to give #ticks before next multiple of 16

	asm("cmp r2, r0 ");

	asm("movlt r0, r2 ");				// update result if necessary

	asm("1: ");

	asm("movs r1, r1, ror r12 ");		// r1=iPresent rotated so that LSB corresponds to next tick

	__JUMP(eq,lr);						// if iPresent=0, finished

	asm("mov r3, #0 ");					// r3 will accumulate bit number of least significant 1

	asm("movs r2, r1, lsl #16 ");

	asm("movne r1, r2 ");

	asm("addeq r3, r3, #16 ");

	asm("movs r2, r1, lsl #8 ");

	asm("movne r1, r2 ");

	asm("addeq r3, r3, #8 ");

	asm("movs r2, r1, lsl #4 ");

	asm("movne r1, r2 ");

	asm("addeq r3, r3, #4 ");

	asm("movs r2, r1, lsl #2 ");

	asm("movne r1, r2 ");

	asm("addeq r3, r3, #2 ");

	asm("movs r2, r1, lsl #1 ");

	asm("addeq r3, r3, #1 ");

	asm("cmp r3, r0 ");

	asm("movlt r0, r3 ");				// update result if necessary

	__JUMP(,lr);

	}

/** Tick over the nanokernel timer queue.

	This function should be called by the base port in the system tick timer ISR.

	It should not be called at any other time.

	The value of 'this' to pass is the value returned by NTimerQ::TimerAddress().

	@see NTimerQ::TimerAddress()

 */

__NAKED__ EXPORT_C void NTimerQ::Tick()

	{

	// Enter with r0 pointing to NTimerQ

	asm("ldr r1, __TheScheduler ");

	asm("mrs r12, cpsr ");

	// do the timeslice tick - on ARM __SCHEDULER_MACHINE_CODED is mandatory

	asm("ldr r2, [r1, #%a0]" : : "i" _FOFF(TScheduler,iCurrentThread));

	asm("ldr r3, [r2, #%a0]" : : "i" _FOFF(NThread,iTime));

	asm("subs r3, r3, #1 ");

	asm("strge r3, [r2, #%a0]" : : "i" _FOFF(NThread,iTime));

	asm("streqb r12, [r1, #%a0]" : : "i" _FOFF(TScheduler,iRescheduleNeededFlag));	// r12 lower byte is never 0

	INTS_OFF(r3, r12, INTS_ALL_OFF);	// disable all interrupts

	asm("ldr r1, [r0, #%a0]" : : "i" _FOFF(NTimerQ,iMsCount));	// r1=iMsCount

	asm("ldr r3, [r0, #%a0]" : : "i" _FOFF(NTimerQ,iPresent));	// r3=iPresent

	asm("and r2, r1, #0x1f ");			// r2=iMsCount & 0x1f

	asm("add r1, r1, #1 ");

	asm("str r1, [r0, #%a0]" : : "i" _FOFF(NTimerQ,iMsCount));	// iMsCount++

	asm("mov r1, #1 ");

	asm("tst r3, r1, lsl r2 ");			// test iPresent bit for this tick

	asm("bic r1, r3, r1, lsl r2 ");		// clear iPresent bit

	asm("strne r1, [r0, #%a0]" : : "i" _FOFF(NTimerQ,iPresent));	// update iPresent if necessary

	asm("bne mstim_tick_1 ");			// if bit was set, we have work to do

	asm("tst r2, #0x0f ");				// else test for tick 0 or 16

	asm("msrne cpsr_c, r12 ");			// if neither return

	__JUMP(ne,lr);

	asm("mstim_tick_1: ");				// get here if timers complete this tick

	asm("stmfd sp!, {r4-r6,lr} ");

	asm("add r1, r0, r2, lsl #4 ");		// r1->IntQ for this tick

	asm("ldr r3, [r1, #8]! ");			// r1->DfcQ and r3=DfcQ first

	asm("mov r5, #0 ");					// r5=doDfc=FALSE

	asm("cmp r3, r1 ");

	asm("beq mstim_tick_2 ");			// skip if DfcQ empty

	// Move DFC completions from iDfcQ to iCompletedQ

	asm("ldr lr, [r0, #%a0]" : : "i" _FOFF(NTimerQ,iCompletedQ.iA.iPrev));	// lr=last completed

	asm("ldr r4, [r1, #4] ");			// r4=DfcQ last

	asm("add r5, r0, #%a0" : : "i" _FOFF(NTimerQ,iDfc));	// doDfc=TRUE

	asm("str r3, [lr, #0] ");			// old last pending->next = DfcQ first

	asm("str r4, [r0, #%a0]" : : "i" _FOFF(NTimerQ,iCompletedQ.iA.iPrev));	// last pending=DfcQ last

	asm("str lr, [r3, #4] ");			// DfcQ first->prev = old last pending

	asm("add lr, r0, #%a0" : : "i" _FOFF(NTimerQ,iCompletedQ));				// lr=&iCompletedQ.iA

	asm("str lr, [r4, #0] ");			// DfcQ last->next=&iPending

	asm("str r1, [r1, #0] ");			// DfcQ first=&DfcQ

	asm("str r1, [r1, #4] ");			// DfcQ last=&DfcQ

	asm("mstim_tick_2: ");

	asm("tst r2, #0x0f ");				// check for tick 0 or 16

	asm("bne mstim_tick_3 ");			// skip if not

	// Tick 0 or 16 - must check holding queue and ordered queue

	asm("ldr r3, [r0, #%a0]" : : "i" _FOFF(NTimerQ,iHoldingQ));	// r3=iHoldingQ first

	asm("add r6, r0, #%a0" : : "i" _FOFF(NTimerQ,iHoldingQ));	// r6=&iHoldingQ

	asm("cmp r3, r6 ");

	asm("addne r5, r0, #%a0" : : "i" _FOFF(NTimerQ,iDfc));	// if iHoldingQ nonempty, doDfc=TRUE and skip ordered queue check

	asm("bne mstim_tick_3 ");			// skip if iHoldingQ nonempty

	asm("ldr r3, [r0, #%a0]" : : "i" _FOFF(NTimerQ,iOrderedQ));	// r3=iOrderedQ first

	asm("add r6, r0, #%a0" : : "i" _FOFF(NTimerQ,iOrderedQ));	// r6=&iOrderedQ

	asm("cmp r3, r6 ");

	asm("beq mstim_tick_3 ");			// skip if iOrderedQ empty

	asm("ldr r4, [r0, #%a0]" : : "i" _FOFF(NTimerQ,iMsCount));		// else r4=iMsCount

	asm("ldr r3, [r3, #%a0]" : : "i" _FOFF(NTimer,iTriggerTime));	// and r3=trigger time of first on ordered queue

	asm("sub r3, r3, r4 ");				// r3=trigger time-iMsCount

	asm("cmp r3, #31 ");

	asm("addls r5, r0, #%a0" : : "i" _FOFF(NTimerQ,iDfc));	// if first expiry in <=31ms, doDfc=TRUE

	// Check iIntQ

	asm("mstim_tick_3: ");

	asm("ldr r3, [r1, #-8]! ");			// r1->iIntQ, r3=iIntQ first

	asm("mov r6, r12 ");				// r6=original cpsr

	asm("cmp r3, r1 ");					// test if iIntQ empty

	asm("beq mstim_tick_4 ");			// branch if it is

	// Transfer iIntQ to a temporary queue

	asm("ldr r4, [r1, #4] ");			// r4=iIntQ last

	asm("str r1, [r1, #0] ");			// clear iIntQ

	asm("str r1, [r1, #4] ");

	asm("stmfd sp!, {r3,r4} ");			// copy queue onto stack

	asm("str sp, [r4, #0] ");			// iIntQ last->next=sp

	asm("str sp, [r3, #4] ");			// iIntQ first->prev=sp

	INTS_OFF_1(r4, r6, INTS_ALL_OFF);	// r4=cpsr with all interrupts off

	// Walk the temporary queue and complete timers

	asm("mstim_tick_5: ");

	INTS_OFF_2(r4, r6, INTS_ALL_OFF);	// all interrupts off

	asm("ldr r0, [sp, #0] ");			// r0=q.iNext

	asm("mov r3, #%a0" : : "i" ((TInt)NTimer::EIdle));

	asm("cmp r0, sp ");					// end of queue?

	asm("beq mstim_tick_6 ");			// if so, branch out

	asm("ldmia r0!, {r1,r2} ");			// r1=next r2=prev, r0->iPtr

	asm("strb r3, [r0, #%a0]" : : "i" (_FOFF(NTimer,iState)-8));	// iState=EIdle

	ASM_KILL_LINK_OFFSET(r0,r12,-8);

	asm("ldmia r0, {r0,r12} ");			// r0=iPtr, r12=iFunction

	asm("str r1, [r2, #0] ");			// prev->next=next

	asm("str r2, [r1, #4] ");			// next->prev=prev

	asm("adr lr, mstim_tick_5 ");		// return to mstim_tick_5

	asm("msr cpsr, r6 ");				// restore interrupts

	asm("cmp r12, #0 ");				// iFunction==NULL ?

	asm("beq mstim_tick_7 ");			// if so queue Dfc (iPtr is a pointer to TDfc )

	__JUMP(,r12);						// call timer callback with r0=iPtr

	asm("b mstim_tick_6 ");				// skip queuing of Dfc

	asm("mstim_tick_7: ");

	asm("b  " CSM_ZN4TDfc3AddEv);		// add the DFC with r0=iPtr - a pointer to TDfc

	asm("mstim_tick_6: ");

	asm("add sp, sp, #8 ");				// take temporary queue off stack

	asm("mstim_tick_4: ");

	asm("msr cpsr, r6 ");				// restore original interrupt state

	asm("movs r0, r5 ");				// DFC needed? if so, r0->iDfc

	asm("ldmfd sp!, {r4-r6,lr} ");		// restore registers

	asm("bne  " CSM_ZN4TDfc3AddEv);				// add the DFC if required

	__JUMP(,lr);						// if no DFC needed, return

	asm("__TheScheduler: ");

	asm(".word TheScheduler ");

	}

__NAKED__ void NTimerQ::DfcFn(TAny* /*aPtr*/)

	{

	// Enter with r0 pointing to NTimerQ

	asm("stmfd sp!, {r7-r11,lr} ");

	SET_INTS_1(r11, MODE_SVC, INTS_ALL_ON);		// always called from SVC mode 

	SET_INTS_1(r10, MODE_SVC, INTS_ALL_OFF);	// with interruts enabled

	// First transfer entries on the Ordered queue to the Final queues

	asm("mstim_dfc_0: ");

	SET_INTS_2(r10, MODE_SVC, INTS_ALL_OFF);	// disable interrupts

	asm("ldr r1, [r0, #%a0]!" : : "i" _FOFF(NTimerQ,iOrderedQ));	// r0->iOrderedQ, r1=orderedQ first

	asm("cmp r1, r0 ");

	asm("beq mstim_dfc_1 ");			// ordered Q empty so move to next stage

	asm("ldr r2, [r1, #%a0]" : : "i" _FOFF(NTimer,iTriggerTime));	// r2=r1->trigger time

	asm("ldr r3, [r0, #-12] ");			// r3=iMsCount

	asm("subs r3, r2, r3 ");			// r3=trigger time-iMsCount

	asm("cmp r3, #31 ");				// test if remaining time <32ms or has already passed

	asm("bgt mstim_dfc_1 ");			// if >31ms, move to next stage (signed comparison to catch already passed case)

	asm("sub r0, r0, #%a0" : : "i" _FOFF(NTimerQ,iOrderedQ));		// r0->NTimerQ

	asm("bl dequeaddfinal ");			// <=31ms, so deque and add to final queue

	SET_INTS_2(r11, MODE_SVC, INTS_ALL_ON);	// let interrupts in

	__DEBUG_CALLBACK(0);

	asm("b mstim_dfc_0 ");

	asm("mstim_dfc_1: ");

	SET_INTS_2(r11, MODE_SVC, INTS_ALL_ON);	// let interrupts in

	asm("sub r0, r0, #%a0" : : "i" _FOFF(NTimerQ,iOrderedQ));		// r0->NTimerQ

	__DEBUG_CALLBACK(1);

	// Next transfer entries on the Holding queue to the Ordered queue or final queue

	asm("mstim_dfc_2: ");

	SET_INTS_2(r10, MODE_SVC, INTS_ALL_OFF);	// disable interrupts

	asm("ldr r1, [r0, #%a0]!" : : "i" _FOFF(NTimerQ,iHoldingQ));	// r0->iHoldingQ, r1=holdingQ first

	asm("cmp r1, r0 ");

	asm("beq mstim_dfc_3 ");			// holding Q empty so move to next stage

	asm("ldr r2, [r1, #%a0]" : : "i" _FOFF(NTimer,iTriggerTime));	// r2=r1->trigger time

	asm("ldr r3, [r0, #-4] ");			// r3=iMsCount

	asm("sub r0, r0, #%a0" : : "i" _FOFF(NTimerQ,iHoldingQ));		// r0->NTimerQ

	asm("subs r3, r2, r3 ");			// r3=trigger time-iMsCount

	asm("cmp r3, #31 ");				// test if remaining time <32ms or has already passed

	asm("bgt mstim_dfc_4 ");			// if >31ms, need to put it on the ordered Q (signed comparison to catch late case)

	asm("bl dequeaddfinal ");			// <=31ms or already passed, so deque and add to final queue

	asm("mstim_dfc_7: ");

	SET_INTS_2(r11, MODE_SVC, INTS_ALL_ON);	// let interrupts in

	__DEBUG_CALLBACK(2);

	asm("b mstim_dfc_2 ");				// process next holding Q entry

	// need to put entry r1 trigger time r2 on the ordered Q

	asm("mstim_dfc_4: ");

	asm("ldmia r1, {r3,r12} ");			// r3=r1->next, r12=r1->prev

	asm("mov r9, #0 ");

	asm("strb r9, [r0, #%a0]" : : "i" _FOFF(NTimerQ,iTransferringCancelled));	// iTransferringCancelled=0

	asm("str r3, [r12, #0] ");			// prev->next=next

	asm("str r12, [r3, #4] ");			// next->prev=prev

	asm("mov r3, #%a0" : : "i" ((TInt)NTimer::ETransferring));

	asm("strb r3, [r1, #%a0]" : : "i" _FOFF(NTimer,iState));		// r1->iState=ETransferring

	asm("mstim_dfc_5: ");

	SET_INTS_2(r11, MODE_SVC, INTS_ALL_ON);	// let interrupts in

	asm("add lr, r0, #%a0" : : "i" _FOFF(NTimerQ,iOrderedQ));	// lr=&iOrderedQ.iA