// Copyright (c) 1997-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of the License "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

// e32test\device\t_modem1.cpp

// Test program for PC Card Serial Port Driver - Requires Dacom GoldCard Modem.

// 

//

#include <e32std.h>

#include <e32std_private.h>

#include <e32test.h>

#include <e32cons.h>

#include <e32svr.h>

#include <e32hal.h>

#include <e32uid.h>

#include <d32comm.h>

#include <hal.h>

class RComm : public RBusDevComm

	{

public:

	TInt WriteS(const TDesC8& aDes);

	};

const TInt KBlockSize=256;

//                                  Block size     Line rate

const TInt KBlocksShort=4; 	        // 4*256=1K     - <1200

const TInt KBlocksMedium=12; 	    // 12*256=3K    - <4800

const TInt KBlocksLong=64; 	        // 64*256=16K   - <28800

const TInt KBlocksVeryLong=128; 	// 128*256=32K  -  28800

enum TLineRate {EV21_300,EBell103_300,EV22_1200,EBell212_1200,EV22bis_2400,

				  EV32_4800,EV32_9600,EV32bis_14400,EV34_28800,ELineRateEnd};

const TInt KMaxLineRates=ELineRateEnd;

const TInt KStandardRxBufferSize=0x400;

#if !defined (__WINS__)

#define PDD_NAME _L("EUARTn")

#define LDD_NAME _L("ECOMM")

#else

#define PDD_NAME _L("ECDRV.PDD")

#define LDD_NAME _L("ECOMM.LDD")

#endif

LOCAL_D RTest test(_L("T_MODEM1"));

LOCAL_D TInt LineModeData[KMaxLineRates]={0,64,1,69,2,9,9,10,11};

LOCAL_D TInt LineRateData[KMaxLineRates]={300,300,1200,1200,2400,4800,9600,14400,28800};

LOCAL_D TInt LineConnectData[KMaxLineRates]={1200,1200,1200,1200,2400,4800,9600,14400,28800};

LOCAL_D RComm *theSerialPort;

TInt RComm::WriteS(const TDesC8& aDes)

//

// Syncronous write

//

	{

	TRequestStatus s;

	Write(s,aDes,aDes.Length());

	User::WaitForRequest(s);

	return(s.Int());

	}

LOCAL_C TPtrC BaudRateInText(TBps aRate)

//

// Convert into Baudrate text

//

    {

    switch (aRate)

	    {

        case EBps50:       return(_L("50"));        break;

        case EBps75:       return(_L("75"));        break;

        case EBps110:      return(_L("110"));       break;

        case EBps134:      return(_L("134"));       break;

        case EBps150:      return(_L("150"));       break;

        case EBps300:      return(_L("300"));       break;

        case EBps600:      return(_L("600"));       break;

        case EBps1200:     return(_L("1200"));      break;

        case EBps1800:     return(_L("1800"));      break;

        case EBps2000:     return(_L("2000"));      break;

        case EBps2400:     return(_L("2400"));      break;

        case EBps3600:     return(_L("3600"));      break;

        case EBps4800:     return(_L("4800"));      break;

        case EBps7200:     return(_L("7200"));      break;

        case EBps9600:     return(_L("9600"));      break;

        case EBps19200:    return(_L("19200"));     break;

        case EBps38400:    return(_L("38400"));     break;

        case EBps57600:    return(_L("57600"));     break;

        case EBps115200:   return(_L("115000"));    break;

        default:           return(_L("Unknown"));   break;

	    }

    }

LOCAL_C TInt TranslateCrLf(TDes8 &aDes)

//

// Search for CR/LF characters in a string and replace them with 

// '\r' '\n' format. Also replaces unprintable characters with "?"

//

    {

    TText8 buf[KBlockSize];

    TText8 *pS=(TText8*)aDes.Ptr();

    TText8 *pSE=pS+aDes.Size();

    TText8 *pT=&buf[0];

    TText8 *pTMax=pT+(KBlockSize-1);

    for (;pS<pSE;pS++,pT++)

        {

        if (pT>=pTMax)

            return(KErrTooBig);

        if (*pS=='\xD'||*pS=='\xA')

            {

            *pT++='\\';       

            *pT=(*pS=='\xD')?'r':'n';

            }

        else if (((TChar)*pS).IsPrint())

            *pT=*pS;

        else

            *pT='\?';

        }

    *pT=0;

    if ((pT-&buf[0])>aDes.MaxLength())

        return(KErrTooBig);

    aDes.Copy(&buf[0]);

    return(KErrNone);

    }

/* ???

LOCAL_C void PrintBuf(TDes8 &aBuf)

//

// Print the contents of a buffer

//

	{

	TInt len=aBuf.Length();

	for (TInt i=0;i<=len/8;i++)

		{

		test.Printf(_L("%4d: "),i*8);

		for (TInt j=0;j<8;j++)

			{

			if ((i*8)+j>=len)

				break;

			TInt v=aBuf[(i*8)+j];

			test.Printf(_L("%02x "),v);

			}

		test.Printf(_L("\n\r"));

		}

	}

*/

LOCAL_C void testLoopBack(TLineRate aLineRate,TBps aBaudRate)

//

// Perform an analogue loopback test at the specified linerate

//

    {

    TInt err;

	TBuf<64> b;

	TPtrC bd=BaudRateInText(aBaudRate);

	b.Format(_L("Loopback test(%S)"),&bd);

	test.Start(b);

    TBuf8<KBlockSize> txBuf;

	theSerialPort->ResetBuffers();

	txBuf.Format(_L8("AT&F+MS=%d,0,%d,%d\\N0&K3&D2M0\r"),LineModeData[aLineRate],LineRateData[aLineRate],LineRateData[aLineRate]);

    test(theSerialPort->WriteS(txBuf)==KErrNone);

    TBuf8<KBlockSize> rxBuf;

	User::After(2000000);		  // 2Secs

	err=theSerialPort->QueryReceiveBuffer();

    test(err>0);

	rxBuf.SetLength(err);

	TRequestStatus rxStat;

    theSerialPort->ReadOneOrMore(rxStat,rxBuf);

	User::WaitForRequest(rxStat);

//	test.Printf(_L("   Rx(%d):"),rxStat); // ???

    test(rxStat==KErrNone);

    txBuf.Append(_L("\r\nOK\r\n"));

  	err=rxBuf.Compare(txBuf);

//	test(TranslateCrLf(rxBuf)==KErrNone); // ???

//  test.Printf(_L(" %S\r\n"),&rxBuf); // ???

  	test(err==0);

	test.Next(_L("Get loopback"));

	txBuf.Format(_L8("AT&T1\r"));

    test(theSerialPort->WriteS(txBuf)==KErrNone);

	User::After(5000000);		  // 5Secs

	err=theSerialPort->QueryReceiveBuffer();

    test(err>0);

	rxBuf.SetLength(err);

    theSerialPort->ReadOneOrMore(rxStat,rxBuf);

	User::WaitForRequest(rxStat);

	test.Printf(_L("   Rx(%d):"),rxStat);

    test(rxStat==KErrNone);

    txBuf.AppendFormat(_L8("\r\nCONNECT %d\r\n"),LineConnectData[aLineRate]);

  	err=rxBuf.Compare(txBuf);

    test(TranslateCrLf(rxBuf)==KErrNone);

    test.Printf(_L(" %S\r\n"),&rxBuf); // Print what we got back (without CR/LF etc).

    // Sometimes get extra character as modem goes on-line so just look for command echo + connect

  	test(err>=0);

	User::After(2000000);		  // 2Secs

	TInt totalBlocksToTransfer;

    if (aBaudRate<EBps1200||aLineRate<EV22_1200)

        totalBlocksToTransfer=KBlocksShort;

    else if (aBaudRate<EBps4800||aLineRate<EV32_4800)

        totalBlocksToTransfer=KBlocksMedium;

    else if (aLineRate<EV34_28800)

        totalBlocksToTransfer=KBlocksLong;

    else

        totalBlocksToTransfer=KBlocksVeryLong;

	b.Format(_L("Transfering data(%dK)"),(totalBlocksToTransfer*KBlockSize)/1024);

	test.Next(b);

	TInt loopBackFail=KErrGeneral;

	TRequestStatus txStat;

    txBuf.SetLength(KBlockSize);

	TInt i;

	for (i=0;i<KBlockSize;i++)

		txBuf[i]=(TUint8)i;

    theSerialPort->Write(txStat,txBuf,KBlockSize);

	TInt txBlks=(totalBlocksToTransfer-1);

    rxBuf.Fill(0,KBlockSize);

    theSerialPort->Read(rxStat,rxBuf,KBlockSize);

	TInt rxBlks=0;

	TRequestStatus tStat;

	RTimer tim;

	test(tim.CreateLocal()==KErrNone);

	tim.After(tStat,40000000);  // 40Secs

	test.Printf(_L(">"));

	FOREVER

		{

		User::WaitForAnyRequest();

		if (tStat!=KRequestPending)

       		{

//			test.Printf(_L("t"));   // Timed out

			theSerialPort->ReadCancel(); // Cancel serial read

			User::WaitForRequest(rxStat);

			if (txBlks>0)

				{

		        theSerialPort->WriteCancel(); // Cancel serial write

		        User::WaitForRequest(txStat);

				}

			loopBackFail=KErrTimedOut; // Test failed

			break;						

        	}

		else if (rxStat!=KRequestPending)

        	{

//			test.Printf(_L("r"));   // Serial rx request complete

			if (rxStat!=0)

				{

				loopBackFail=rxStat.Int(); // Test failed

				goto endSerial;

				}

			for (i=0;i<KBlockSize;i++)

				{

				if (rxBuf[i]!=i)

					{

					loopBackFail=KErrCorrupt; // Test failed

			        rxBuf[KBlockSize-1]=0;

//					PrintBuf(rxBuf); // ???

//					goto endSerial; // !!!Ignore compare fails for now!!!

					}

				}

			test.Printf(_L("<"));

			if (++rxBlks<totalBlocksToTransfer)

				{

                rxBuf.Fill(0,KBlockSize);

                theSerialPort->Read(rxStat,rxBuf,KBlockSize);

				}

			else

				{

				loopBackFail=KErrNone;

endSerial:

			    tim.Cancel(); // Cancel timer request.

			    User::WaitForRequest(tStat);

				if (txBlks>0)

					{

		            theSerialPort->WriteCancel(); // Cancel serial write

		            User::WaitForRequest(txStat);

					}

				break;

				}

        	}

		else if (txStat!=KRequestPending)

        	{

//			test.Printf(_L("s")); // Serial tx request complete

			if (txBlks>0)

				{

                theSerialPort->Write(txStat,txBuf,KBlockSize);

				test.Printf(_L(">"));

				txBlks--;

				}

        	}

    	else

        	{

//			test.Printf(_L("?")); // Stray signal - cancel everything

			theSerialPort->ReadCancel(); // Cancel serial read

			User::WaitForRequest(rxStat);

			tim.Cancel(); // Cancel timer request.

			User::WaitForRequest(tStat);

			if (txBlks>0)

				{

		        theSerialPort->WriteCancel(); // Cancel serial write

		        User::WaitForRequest(txStat);

				}

			loopBackFail=KErrDied;

            break;

        	}

		}

	test.Printf(_L(" (%d)\r\n"),loopBackFail);

	// !!! At this point RTS may or may not be asserted following the write cancel. The

	// following seems necessary to make sure RTS is asserted so any remaining Rx data

	// can be received.and thrown away

	User::After(2000000);

	theSerialPort->ResetBuffers();

 	User::After(1000000);		   // Wait 1Secs for any remaining Rx data

	tim.Close();

	test.Next(_L("Disconnect"));

	theSerialPort->ResetBuffers(); // Through away any remaining Rx data.

	txBuf.Format(_L8("+++"));

    test(theSerialPort->WriteS(txBuf)==KErrNone);

	User::After(2000000);		  // 2Secs

	err=theSerialPort->QueryReceiveBuffer();

    test(err>0);

	rxBuf.SetLength(err);

    theSerialPort->ReadOneOrMore(rxStat,rxBuf);

	User::WaitForRequest(rxStat);

    test(rxStat==KErrNone);

    txBuf.Append(_L("\r\nOK\r\n"));

  	err=rxBuf.Compare(txBuf);

//  test(TranslateCrLf(rxBuf)==KErrNone); // ???

//  test.Printf(_L("   %S\r\n"),&rxBuf); // ???

	test(err==0);

	txBuf.Format(_L8("ATH0\r"));

    test(theSerialPort->WriteS(txBuf)==KErrNone);

	User::After(4000000);		  // 4Secs

	err=theSerialPort->QueryReceiveBuffer();

    test(err>0);

	rxBuf.SetLength(err);

    theSerialPort->ReadOneOrMore(rxStat,rxBuf);

	User::WaitForRequest(rxStat);

    test(rxStat==KErrNone);

    txBuf.Append(_L("\r\nOK\r\n"));

  	err=rxBuf.Compare(txBuf);

//  test(TranslateCrLf(rxBuf)==KErrNone); // ???

//  test.Printf(_L("   %S\r\n"),&rxBuf); // ???

  	test(err==0);

	test.Next(_L("Check result"));

	test(loopBackFail==KErrNone || loopBackFail==KErrCorrupt); // !!!Ignore compare fails for now!!!

//	test(loopBackFail==KErrNone);

	test.End();

    }

LOCAL_C void testAllLineRates(TBps aRate)

//

// Perform loopback test at the specified baudrate in as many line modes that 

// are supported at this baudrate

//

    {

	test.Start(_L("Setting baudrate"));

	TCommConfig cBuf;

	TCommConfigV01 &c=cBuf();

	theSerialPort->Config(cBuf);

	c.iRate=aRate;

	c.iDataBits=EData8;

	c.iStopBits=EStop1;

	c.iParity=EParityNone;

	c.iHandshake=KConfigObeyCTS;

//	c.iHandshake=0;

	test(theSerialPort->SetConfig(cBuf)==KErrNone);

	if (aRate>=EBps38400)

		{

	    test.Next(_L("Testing at V.34-28800"));

	    testLoopBack(EV34_28800,aRate);

        }

	if (aRate>=EBps19200)

		{

	    test.Next(_L("Testing at V.32bis-14400"));

	    testLoopBack(EV32bis_14400,aRate);

        }

	if (aRate>=EBps9600)

		{

	    test.Next(_L("Testing at V.32-9600"));

	    testLoopBack(EV32_9600,aRate);

        }

//	if (aRate>=EBps4800)

//		{

//	    test.Next(_L("Testing at V.32-4800"));

//	    testLoopBack(EV32_4800,aRate);

//		}

	if (aRate>=EBps2400)

		{

		test.Next(_L("Testing at V.22bis-2400"));

		testLoopBack(EV22bis_2400,aRate);

		}

//	if (aRate>=EBps1200)

//		{

//	    test.Next(_L("Testing at Bell212-1200"));

//	    testLoopBack(EBell212_1200,aRate);

//      }

//	if (aRate>=EBps1200)

//		{

//	    test.Next(_L("Testing at V.22-1200"));

//	    testLoopBack(EV22_1200,aRate);

//      }

//	test.Next(_L("Testing at Bell103-300"));

//	testLoopBack(EBell103_300,aRate);

	test.Next(_L("Testing at V.21-300"));

    testLoopBack(EV21_300,aRate); 

    test.End();

    }

GLDEF_C TInt E32Main()

	{

//	test.SetLogged(EFalse); 	// Turn off serial port debugging!

    TInt r;

	test.Title();

	test.Start(_L("PC Card Modem Test Program"));

	RProcess proc;

	TBuf <0x100> cmd;

	proc.CommandLine(cmd);

	// First parameter (if present) sets the serial port number

	TInt port=0;

	if ((cmd.Length()>0) && (cmd[0]>='1' && cmd[0]<='4'))

		port=(TInt)(cmd[0]-'0');

	// 2nd parameter (if present) sets the start speed 

	// (4=115K,3=57600,2=38400,1=19200,0=9600)

	TInt startSpeed=4;

	if ((cmd.Length()>3) && (cmd[2]>='0' && cmd[2]<='4'))

			startSpeed=(TInt)(cmd[2]-'0');

	test.Next(_L("Load Device Drivers"));

    TBuf<10> pddName=PDD_NAME;

#if !defined (__WINS__)

	pddName[5]=(TText)('1'+port);

	TInt muid=0;

	if (HAL::Get(HAL::EMachineUid, muid)==KErrNone)

		{

		// Brutus uses EUART4 for both COM3 and COM4

		if (muid==HAL::EMachineUid_Brutus && port==4)

			pddName[5]=(TText)'4';

		}

#endif

	r=User::LoadPhysicalDevice(pddName);

	test(r==KErrNone||r==KErrAlreadyExists);

	r=User::LoadLogicalDevice(LDD_NAME);

	test(r==KErrNone||r==KErrAlreadyExists);

	test.Next(_L("Open serial port"));

	theSerialPort=new RComm;

	test(theSerialPort!=NULL);

	r=theSerialPort->Open(port);

	test(r==KErrNone);

//  TCommCaps capsBuf;

//  TCommCapsV01& caps=capsBuf();

//	theSerialPort->Caps(capsBuf);

	// Check that the driver powering sequence has completed successfully by

	// issueing a few simple driver control functions.

	test.Next(_L("Modem power tests"));

	test(theSerialPort->SetReceiveBufferLength(KStandardRxBufferSize)==KErrNone);

	r=theSerialPort->ReceiveBufferLength();

//	test.Printf(_L("(%d)"),r); // ???

	test(r==KStandardRxBufferSize);

	r=(TInt)theSerialPort->Signals();

//	test.Printf(_L("(%d)"),r); // ???

	test(r>=0);

	RTimer timer;

	TRequestStatus rs;

	test(timer.CreateLocal()==KErrNone);

	TTime tim;

	tim.HomeTime();

	tim+=TTimeIntervalSeconds(8);

	timer.At(rs,tim);

	UserHal::SwitchOff();

	User::WaitForRequest(rs);

	test(rs.Int()==KErrNone);

	r=theSerialPort->ReceiveBufferLength();

//	test.Printf(_L("(%d)"),r); // ???

	test(r==KStandardRxBufferSize);

	r=(TInt)theSerialPort->Signals();

//	test.Printf(_L("(%d)"),r); // ???

	test(r>=0);

	User::After(2000000);		  // 2Secs !!!

	if (startSpeed>=4)

		{

		test.Next(_L("Testing at 115K"));

  		testAllLineRates(EBps115200);

		}

	if (startSpeed>=3)

		{

		test.Next(_L("Testing at 57600"));

    	testAllLineRates(EBps57600);

		}

	if (startSpeed>=2)