//

// Copyright (c) 2007-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

//

//

LOAD_SUITE LbsClientTestServer -SharedData

RUN_UTILS CopyFile c:\testdata\configs\lbsclientlastknownposareasources.txt c:\config.txt

////////////////////////////////////// MOLR TA

LOAD_SUITE LbsHybridMOLRTestServer -SharedData

// Before we start LBS, select the test A-GPS integration module to use.

// Make sure the default profile is used, rather than one from the c drive

PREFIX RUN_UTILS

	DeleteFile c:\private\10282253\lbs\lbsprofile.ini

	MkDir c:\private\10282253\

	MkDir c:\private\10282253\lbs\

	MkDir c:\private\10282253\lbs\locmods\

//	CopyFile c:\testdata\configs\xtestmodule.ini c:\private\10282253\lbs\locmods\agpsintegmodule.ini

//	CopyFile c:\testdata\configs\lbstestconfig.txt c:\config.txt

REMOVE_PREFIX

// Reset admin (reset will give us the EGpsPreferTerminalBased).

RUN_TEST_STEP 010 LbsHybridMOLRTestServer LbsStep_ResetDefaultAdmin

// Use hybrid protocol module

RUN_TEST_STEP 010 LbsHybridMOLRTestServer LbsStep_SetupProtocolStub

// Use hybrid protocol module

RUN_TEST_STEP 010 LbsHybridMOLRTestServer LbsStep_SetupRoamSelfLocate

RUN_TEST_STEP 030 LbsHybridMOLRTestServer LbsStep_StartLbs

START_TESTCASE                LBS-Client-LastKnownPosAreaSources-0001

//! @SYMTestCaseID              LBS-Client-LastKnownPosAreaSources-0001

//! @SYMTestCaseDesc            1. Client generates MOLR request 

//!				2. GPS Module generates an accurate position in UE Assisted State 

//!				3. Position is saved to Last Known pos database

//! @SYMTestPriority            Medium

//! @SYMTestActions             See test step Sequence inline comments

//! @SYMTestExpectedResults     Sequence as per specified by FSM and UML Seq diagram is Followed

//! @SYMTestType                CIT

//! @SYMCreationDate            1/4/1009

//! @SYMAuthor                  oad

RUN_TEST_STEP 010 LbsHybridMOLRTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsHybridMOLRTestServer LbsStep_SetUpPsy c:\testdata\configs\lbs_molr.ini LBS-MOLR

// Configure Hybrid AGps module options

RUN_TEST_STEP 120 LbsHybridMOLRTestServer LbsStep_ConfigHybridModule c:\testdata\configs\lbs_molr.ini UEAssistedMOLRGpsOk

RUN_TEST_STEP 010 LbsClientTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 120 LbsClientTestServer LbsClientStep_LastKnownPosAreaSources c:\testdata\configs\lbsclientlastknownposareasources.ini LBS-Client-LastKnownPosAreaSources-1001

RUN_TEST_STEP 120 LbsHybridMOLRTestServer LbsHybridUEAssistedMOLRGPSOk

RUN_TEST_STEP 120 LbsClientTestServer LbsClientStep_LastKnownPosAreaSources c:\testdata\configs\lbsclientlastknownposareasources.ini LBS-Client-LastKnownPosAreaSources-0001

END_TESTCASE                  LBS-Client-LastKnownPosAreaSources-0001

RUN_TEST_STEP 030 LbsHybridMOLRTestServer LbsStep_StopLbs

DELAY 5000

/////////////////////////////////////// Cell Based

//Before we start LBS, select the test A-GPS integration module and network reg status txt file to use.

PREFIX RUN_UTILS

	MkDir c:\private\10282253\

	MkDir c:\private\10282253\lbs\

	MkDir c:\private\10282253\lbs\locmods\

	CopyFile c:\testdata\configs\xtestmodule.ini c:\private\10282253\lbs\locmods\agpsintegmodule.ini

//        CopyFile c:\testdata\configs\lbstestconfig.txt c:\config.txt

	DeleteFile c:\private\10202be9\1028224b.cre 

 	DeleteFile c:\private\10202be9\persists\1028224b.cre 

REMOVE_PREFIX

RUN_TEST_STEP 010 LbsClientTestServer LbsStep_ResetDefaultAdmin 

RUN_TEST_STEP 020 LbsClientTestServer LbsStep_StartLbs

START_TESTCASE LBS-Client-LastKnownPosAreaSources-0002

//!@SYMTestCaseID			LBS-Client-LastKnownPosAreaSources-0002

//!@SYMTestCaseDesc			Request a cell-based location

//!@SYMTestActions			

//!					1) Open a sub-session using RPositioner::Open() and specifying the network modules module id

//!					2) Request Location Update.

//!					3) Wait for location request to complete.

//!					4) Verify that the location request is logged with appropriate details.  

//!					5) Verify that location is saved by location monitor                                                                                                                                                               

//!

//!@SYMTestExpectedResults		Reference (cell-based) location retrieved and details logged

//!

//!@SYMTestType				CIT

//!@SYMTestPriority			medium

//!@SYMTestStatus			Implemented

RUN_TEST_STEP 010 LbsClientTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 120 LbsClientTestServer LbsClientStep_LastKnownPosAreaSources c:\testdata\configs\lbsclientlastknownposareasources.ini LBS-Client-LastKnownPosAreaSources-1001

RUN_TEST_STEP 020 LbsClientTestServer LbsStep_SetUpPsy c:\testdata\configs\LbsClientCellbasedNPUD.ini LBS-CLIENT-CELLBASEDNPUD

RUN_TEST_STEP 010 LbsClientTestServer LbsStep_ClearLog

RUN_TEST_STEP 020 LbsClientTestServer LbsStep_CreateVerifyPosInfos  c:\testdata\configs\LbsClientCellbasedNPUD.ini LBS-NotifyPosUpdate-CellBased

RUN_TEST_STEP 120 LbsClientTestServer LbsClientStep_CellBasedNotifyPosUpdate c:\testdata\configs\LbsClientCellbasedNPUD.ini LBS-NotifyPosUpdate-CellBased-0001

RUN_TEST_STEP 010 LbsClientTestServer LbsStep_VerifyPosInfos

//RUN_TEST_STEP 020 LbsClientTestServer LbsStep_VerifyLogInfo c:\testdata\configs\LbsClientCellbasedNPUD.ini LBS-NotifyPosUpdate-CellBased-0001

RUN_TEST_STEP 120 LbsClientTestServer LbsClientStep_LastKnownPosAreaSources c:\testdata\configs\lbsclientlastknownposareasources.ini LBS-Client-LastKnownPosAreaSources-0003

END_TESTCASE LBS-Client-LastKnownPosAreaSources-0002

DELAY 5000

/////////////////////////////////////// BT

LOAD_SUITE ctlbsbtgpspsytestserver

START_TESTCASE                LBS-Client-LastKnownPosAreaSources-0003

//! @SYMTestCaseID              LBS-Client-LastKnownPosAreaSources-0003

//! @SYMTestCaseDesc            Tests to ensure the BT PSY is able to deal with a device list which contains a number of devices.  The PSY should be able to connect to and receive a location request from the only available BT device at the top of the list.  The PSY should not need to edit the device list or look at the unavailable devices at the end of the list.  The device in the list is listed as a known device so the PSY should be able to connect directly to the device.

//! @SYMTestActions             1. Test should add a number of BT devices to the device list.  One available BT device should be added to the top of the list.  This device should be an available BT device with the device type of valid.

//!                             2. Test makes a location request and should get a position returned back to it.

//!                             3. Test checks the list to ensure no changes have been made.

//!				4. Test verifies that position has been saved by location monitor

//! @SYMTestExpectedResults     Test should receive location update and should not make changes to the device list.

//! @SYMTestType                CIT

//! @SYMCreationDate            8/12/2008

//! @SYMAuthor                  JosephSpracklen

//! @SYMTestStatus              3. Released

RUN_TEST_STEP 010 LbsClientTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 120 LbsClientTestServer LbsClientStep_LastKnownPosAreaSources c:\testdata\configs\lbsclientlastknownposareasources.ini LBS-Client-LastKnownPosAreaSources-1001

RUN_TEST_STEP 100 ctlbsbtgpspsytestserver SetupBTGPSDeviceList c:\testdata\configs\setupdevicelist.ini LocRequest02Pre

RUN_TEST_STEP 100 ctlbsbtgpspsytestserver BtGpsPsyLocationRequestStep

RUN_TEST_STEP 100 ctlbsbtgpspsytestserver CheckBTGPSDeviceList c:\testdata\configs\setupdevicelist.ini LocRequest02Post

RUN_TEST_STEP 100 ctlbsbtgpspsytestserver DeleteBTGPSDeviceList

RUN_TEST_STEP 120 LbsClientTestServer LbsClientStep_LastKnownPosAreaSources c:\testdata\configs\lbsclientlastknownposareasources.ini LBS-Client-LastKnownPosAreaSources-0005

END_TESTCASE                  LBS-Client-LastKnownPosAreaSources-0003

PREFIX RUN_UTILS

	DeleteFile c:\config.txt

REMOVE_PREFIX