// Copyright (c) 2008-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

// The script for the Lbs Net PSY Test Suite

// 

//

//! @File

//! @SYMTestSuiteName         LBS-NetPsySuite

//! @SYMScriptTestEnvironment TestExecute using te_lbsnetpsysuite.script

//While loading the suite, we shutdown the whole LBS leaving the root process only.

LOAD_SUITE te_lbsnetpsysuite

PRINT RUN ALL te_lbsnetpsysuite TESTS

START_TESTCASE                	LBS-NetPsySuite-NotifyPositionUpdate-Section0

//! @SYMTestCaseID              LBS-NetPsySuite-NotifyPositionUpdate-Section0

//! @SYMTestCaseDesc            Runs several pos update scenarios, which completes normally.

//! @SYMTestActions             SIMPLE POSITION UPDATE

//!				1. Create the positioner and update request listener.

//!                             2. The update request listener starts listening. 

//!				3. The positioner issues NPUD.

//!				4. Start the active scheduler for some time.

//!				5. Check that default update request is received with newClient flag set to ETrue.

//!				6. Create and issue the simple pos update.

//!				7. Start the active scheduler for some time.

//!				8. Check the pos update	is received and equal to the sent one.

//!

//!				TWO SIMPLE POSITION UPDATES

//!				9. Create the second positioner.

//!				10. The update request listener starts listening. 

//!				11. The first positioner issues NPUD.

//!				12. Start the active scheduler for some time.

//!				13. Check that default update request is received.

//!				14. The second positioner issues NPUD.

//!				15. Start the active scheduler for some time.

//!				16. Check that no new update request is received.

//!				17. Create and issue the simple pos update.

//!				18. Start the active scheduler for some time.

//!				19. Check the pos update is received and equal to the sent one for both positioners.

//!				20. Delete the second positioner.

//!				

//!				CANCEL A POSITION UPDATE

//!				21. The update request listener starts listening.

//!				22. The positioner issues NPUD.

//!				23. Start the active scheduler for some time.

//!				24. Check that default update request is received.

//!				25. The positioner cancels the NPUD.

//!				26. Start the active scheduler for some time.

//!				27. Check that a cancel update request is received.

//!				28. Check that the positioner NPUD is completed with KErrCancel.

//!				29. Create and issue the simple pos update.

//!			

//!				PARTIAL UPDATE

//!				30. Set the positioner to accept partial updates.

//!				31. Set the update timeout to KWarmDownInterval.

//!				32. The update request listener starts listening.

//!				33. The positioner issues NPUD.

//!				34. Start the active scheduler for some time.

//!				35. Check that the update request is received with the timeout set to KWarmDownInterval.

//!				36. Create and issue the partial pos update.

//!				37. Start the active scheduler for some time.

//!				38. Check the pos update is received and equal to the sent one.

//!				39. Start the active scheduler wait forKWarmDownInterval to make warm down timer working.

//!				

//!				TEST METHODS WHICH ARE NEVER CALLED IN THE PRODUCTION CODE

//!				40. Simulate the timer errors.  

//!

//!				CLEANUP

//!				41. Delete the positioner and update request listener.

//!

//!

//! @SYMTestExpectedResults     The expected pos update requests and pos updates are received.

//! @SYMTestPriority            High

//! @SYMTestType                UT

//! @SYMTestStatus              Released

//! @SYMPREQ                    PREQ 1662

//! @SYMREQ                     REQ 11248, REQ 11250, REQ 11253, REQ 11255, REQ 11256, REQ 11257, REQ 11485, REQ 11487, REQ 11490, REQ 11491, REQ 11492, REQ 8827, REQ 8828, REQ 8831

//! @SYMCreationDate            20/10/2008

//! @SYMAuthor                  NicolayB

RUN_TEST_STEP 100 te_lbsnetpsysuite NotifyPositionUpdate c:\testdata\configs\te_lbsnetpsy.ini Section0

END_TESTCASE                  	LBS-NetPsySuite-NotifyPositionUpdate-Section0

START_TESTCASE                	LBS-NetPsySuite-NotifyPositionUpdateTiming-Section0

//! @SYMTestCaseID              LBS-NetPsySuite-NotifyPositionUpdateTiming-Section0

//! @SYMTestCaseDesc            Runs several pos update scenarios with the accent on the timing issues.

//! @SYMTestActions             HANDLING THE OLD POSITION UPDATE

//!				1. Create the positioner and update request listener. 

//!				2. The update request listener starts listening. 

//!				3. The positioner issues NPUD.

//!				4. Start the active scheduler for some time.

//!				5. Check that default update request is received with newClient flag set to ETrue.

//!				6. Create and issue the pos update with the actual time < target time.

//!				7. Check that no position update is received by the positioner.

//!				8. The update request listener starts listening. 

//!				9. The positioner cancels the request.

//!				10. Start the active scheduler for some time.

//!				11. Check that a cancel request is received.

//!

//!				SETTING MAXAGE AND USING CACHED UPDATE

//!				12. Set the MaxAge for the positioner to some time ago.				

//!				13. The update request listener starts listening.

//!				14. The positioner issues NPUD.

//!				15. Start the active scheduler for some time.

//!				16. Check the cached FNP update is received and equal to the sent one.

//!				17. Check that an update request is not received.

//!				18. Cancel listening for the update requests.

//!				19. Restore the MaxAge to 0.

//!

//!				SETTING MAXAGE, NO CACHED UPDATE

//!				20. Set the MaxAge for the positioner to now.				

//!				21. The update request listener starts listening.

//!				22. The positioner issues NPUD.

//!				23. Start the active scheduler for some time.

//!				24. Check that default update request is received.

//!				25. Create and issue the simple pos update.

//!				26. Start the active scheduler for some time.

//!				27. Check the pos update is received and equal to the sent one.

//!				28. Restore the MaxAge to 0.

//!

//!				SIMPLE TRACKING SCENARIO

//!				29. Check that the tracking flag overriden.

//!				30. The positioner starts tracking.

//!				31. Start the active scheduler for some time.

//!				32. The positioner issues NPUD.

//!				33. Start the active scheduler for some time.

//!				34. Create and issue the simple pos update.

//!				35. Start the active scheduler for some time.

//!				36. Check the pos update is received and equal to the sent one.

//!				37. The positioner stops tracking.

//!

//!				TRACKING SCENARIO WITH LATE REQUEST

//!				38. The positioner starts tracking.

//!				39. Start the active scheduler for some time.

//!				40. The positioner issues NPUD.

//!				41. Start the active scheduler for some time.

//!				42. Create and issue the simple pos update.

//!				43. Start the active scheduler for some time.

//!				44. Check the pos update is received and equal to the sent one.

//!				45. Start the active scheduler for some time.

//!				46. The positioner issues NPUD.

//!				47. Start the active scheduler for some time.

//!				48. Create and issue the simple pos update.

//!				49. Start the active scheduler for some time.

//!				50. Check the pos update is received and equal to the sent one.

//!				51. The positioner stops tracking.

//!

//!				CLEANUP

//!				52. Delete the positioner and update request listener.				

//!

//!

//! @SYMTestExpectedResults     The expected pos update requests and pos updates are received.

//! @SYMTestPriority            High

//! @SYMTestType                UT

//! @SYMTestStatus              Released

//! @SYMPREQ                    PREQ 1662

//! @SYMREQ                     REQ 11248, REQ 11249, REQ 11253, REQ 11254, REQ 11255, REQ 11487, REQ 11488, REQ 11489, REQ 11492, REQ 8827, REQ 8828, REQ 8829 

//! @SYMCreationDate            20/10/2008

//! @SYMAuthor                  NicolayB

RUN_TEST_STEP 100 te_lbsnetpsysuite NotifyPositionUpdateTiming c:\testdata\configs\te_lbsnetpsy.ini Section0

END_TESTCASE                  	LBS-NetPsySuite-NotifyPositionUpdateTiming-Section0

START_TESTCASE                	LBS-NetPsySuite-NotifyPositionUpdateErr-Section0

//! @SYMTestCaseID              LBS-NetPsySuite-NotifyPositionUpdateErr-Section0

//! @SYMTestCaseDesc            Runs several pos update scenarios with errors.

//! @SYMTestActions             SIMPLE POSITION UPDATE ERROR

//!				1. Create the positioner and update request listener. 

//!                             2. The update request listener starts listening. 

//!				3. The positioner issues NPUD.

//!				4. Start the active scheduler for some time.

//!				5. Check that default update request is received with newClient flag set to ETrue.

//!				6. Create and issue the error pos update.

//!				7. Start the active scheduler for some time.

//!				8. Check the pos update	error is received and equal to the sent one.

//!

//!

//!				CPOSITIONER CREATION/DESTRUCTION WITH MEMORY LEAKS

//!				9. Inject the heap error for the Nth(N==0 first) memory allocation.

//!				10. Try to create the positioner and then delete it.

//!				11. Check wheter a memory allocation fails during the positioner creation.

//!				12. If alloc failure occured outside the factory method, stop the test.

//!				13. If alloc failure occured inside the factory method and no leave occured, the positioner must be created.

//!				14. Increment N and go to step 16.

//!

//!				SIMPLE POSITION UPDATE WITH OOM WHILE CALLING NotifyPositionUpdate

//!				15. The update request listener starts listening.

//!				16. Inject the heap error for the Nth(N==0 first) memory allocation.

//!				17. The positioner issues NPUD.

//!				18. Check wheter a memory allocation fails during the positioner creation.

//!				19. Start the active scheduler for some time.

//!				20. If alloc failure occured outside the NPUD, stop the test.

//!				21. If the pos update request is received, check that the pos update is received.

//!				22. If the pos update request is not received, check that the pos update is not received.

//!

//!				CLEANUP

//!				23. Delete the positioner and update request listener.		

//!

//! @SYMTestExpectedResults     The errors are handled correctly and the methods fail with the appropriate err codes.

//! @SYMTestPriority            High

//! @SYMTestType                UT

//! @SYMTestStatus              Released

//! @SYMPREQ                    PREQ 1662

//! @SYMREQ                     REQ 11248, REQ 11487, REQ 11492, REQ 8827, REQ 8828

//! @SYMCreationDate            21/10/2008

//! @SYMAuthor                  NicolayB

RUN_TEST_STEP 300 te_lbsnetpsysuite NotifyPositionUpdateErr c:\testdata\configs\te_lbsnetpsy.ini Section0

END_TESTCASE                  	LBS-NetPsySuite-NotifyPositionUpdateErr-Section0

START_TESTCASE                	LBS-NetPsySuite-ModuleInfo-Section0

//! @SYMTestCaseID              LBS-NetPsySuite-ModuleInfo-Section0

//! @SYMTestCaseDesc            Runs the scenarios where the module info is get.

//! @SYMTestActions             1. Create the positioner and assign the positioner, which will receive the notifications.

//!				2. Issue the module status updates.

//!				3. Check that the information is received by the positioner.

//!				4. Repeat 2-3 with various sets of parameters.

//!

//!

//! @SYMTestExpectedResults     The expected module info updates are received.

//! @SYMTestPriority            High

//! @SYMTestType                UT

//! @SYMTestStatus              Released

//! @SYMPREQ                    PREQ 1662

//! @SYMREQ                     REQ 11260, REQ 11261, REQ 11270, REQ 11487, REQ 11492, REQ 8827, REQ 8832, REQ 8833

//! @SYMCreationDate            21/10/2008

//! @SYMAuthor                  NicolayB

RUN_TEST_STEP 100 te_lbsnetpsysuite ModuleInfo c:\testdata\configs\te_lbsnetpsy.ini Section0

END_TESTCASE                  	LBS-NetPsySuite-ModuleInfo-Section0

START_TESTCASE                	LBS-NetPsySuite-NotifyPositionUpdate-Section1

//! @SYMTestCaseID              LBS-NetPsySuite-NotifyPositionUpdate-Section1

//! @SYMTestCaseDesc            Runs several pos update scenarios, which completes normally.

//! @SYMTestActions             See LBS-NetPsySuite-NotifyPositionUpdate-Section0 actions.

//! @SYMTestExpectedResults     The expected pos update requests and pos updates are received.

//! @SYMTestPriority            High

//! @SYMTestType                UT

//! @SYMTestStatus              Released

//! @SYMPREQ                    PREQ 1662

//! @SYMREQ                     REQ 11248, REQ 11250, REQ 11253, REQ 11255, REQ 11256, REQ 11257, REQ 11485, REQ 11487, REQ 11490, REQ 11491, REQ 11492, REQ 8827, REQ 8828, REQ 8831

//! @SYMCreationDate            21/10/2008

//! @SYMAuthor                  NicolayB

RUN_TEST_STEP 100 te_lbsnetpsysuite NotifyPositionUpdate c:\testdata\configs\te_lbsnetpsy.ini Section1

END_TESTCASE                  	LBS-NetPsySuite-NotifyPositionUpdate-Section1

START_TESTCASE                	LBS-NetPsySuite-NotifyPositionUpdateTiming-Section1

//! @SYMTestCaseID              LBS-NetPsySuite-NotifyPositionUpdateTiming-Section1

//! @SYMTestCaseDesc            Runs several pos update scenarios with the accent on the timing issues.

//! @SYMTestActions             See LBS-NetPsySuite-NotifyPositionUpdateTiming-Section0 actions.

//! @SYMTestExpectedResults     The expected pos update requests and pos updates are received.

//! @SYMTestPriority            High

//! @SYMTestType                UT

//! @SYMTestStatus              Released

//! @SYMPREQ                    PREQ 1662

//! @SYMREQ                     REQ 11248, REQ 11249, REQ 11253, REQ 11254, REQ 11255, REQ 11487, REQ 11488, REQ 11489, REQ 11492, REQ 8827, REQ 8828, REQ 8829 

//! @SYMCreationDate            21/10/2008

//! @SYMAuthor                  NicolayB

RUN_TEST_STEP 100 te_lbsnetpsysuite NotifyPositionUpdateTiming c:\testdata\configs\te_lbsnetpsy.ini Section1

END_TESTCASE                  	LBS-NetPsySuite-NotifyPositionUpdateTiming-Section1

START_TESTCASE                	LBS-NetPsySuite-NotifyPositionUpdateErr-Section1

//! @SYMTestCaseID              LBS-NetPsySuite-NotifyPositionUpdateErr-Section1

//! @SYMTestCaseDesc            Runs several pos update scenarios with errors.

//! @SYMTestActions             See LBS-NetPsySuite-NotifyPositionUpdateErr-Section0 actions.

//! @SYMTestExpectedResults     The errors are handled correctly and the methods fail with the appropriate err codes.

//! @SYMTestPriority            High

//! @SYMTestType                UT

//! @SYMTestStatus              Released

//! @SYMPREQ                    PREQ 1662

//! @SYMREQ                     REQ 11248, REQ 11487, REQ 11492, REQ 8827, REQ 8828

//! @SYMCreationDate            21/10/2008

//! @SYMAuthor                  NicolayB

RUN_TEST_STEP 300 te_lbsnetpsysuite NotifyPositionUpdateErr c:\testdata\configs\te_lbsnetpsy.ini Section1

END_TESTCASE                  	LBS-NetPsySuite-NotifyPositionUpdateErr-Section1

START_TESTCASE                	LBS-NetPsySuite-ModuleInfo-Section1

//! @SYMTestCaseID              LBS-NetPsySuite-ModuleInfo-Section1

//! @SYMTestCaseDesc            Runs the scenarios where the module info is get.

//! @SYMTestActions             See the LBS-NetPsySuite-ModuleInfo-Section0 actions.

//! @SYMTestExpectedResults     The expected module info updates are received.

//! @SYMTestPriority            High

//! @SYMTestType                UT

//! @SYMTestStatus              Released

//! @SYMPREQ                    PREQ 1662

//! @SYMREQ                     REQ 11260, REQ 11261, REQ 11270, REQ 11487, REQ 11492, REQ 8827, REQ 8832, REQ 8833

//! @SYMCreationDate            21/10/2008

//! @SYMAuthor                  NicolayB

RUN_TEST_STEP 100 te_lbsnetpsysuite ModuleInfo c:\testdata\configs\te_lbsnetpsy.ini Section1

END_TESTCASE                  	LBS-NetPsySuite-ModuleInfo-Section1

START_TESTCASE                	LBS-NetPsySuite-NotifyPositionUpdate-Section2

//! @SYMTestCaseID              LBS-NetPsySuite-NotifyPositionUpdate-Section2

//! @SYMTestCaseDesc            Runs several pos update scenarios, which completes normally.

//! @SYMTestActions             See LBS-NetPsySuite-NotifyPositionUpdate-Section0 actions.

//! @SYMTestExpectedResults     The expected pos update requests and pos updates are received.

//! @SYMTestPriority            High

//! @SYMTestType                UT

//! @SYMTestStatus              Released

//! @SYMPREQ                    PREQ 1662

//! @SYMREQ                     REQ 11248, REQ 11250, REQ 11253, REQ 11255, REQ 11256, REQ 11257, REQ 11485, REQ 11487, REQ 11490, REQ 11491, REQ 11492, REQ 8827, REQ 8828, REQ 8831

//! @SYMCreationDate            21/10/2008

//! @SYMAuthor                  NicolayB

RUN_TEST_STEP 100 te_lbsnetpsysuite NotifyPositionUpdate c:\testdata\configs\te_lbsnetpsy.ini Section2

END_TESTCASE                  	LBS-NetPsySuite-NotifyPositionUpdate-Section2

START_TESTCASE                	LBS-NetPsySuite-NotifyPositionUpdateTiming-Section2

//! @SYMTestCaseID              LBS-NetPsySuite-NotifyPositionUpdateTiming-Section2

//! @SYMTestCaseDesc            Runs several pos update scenarios with the accent on the timing issues.

//! @SYMTestActions             See LBS-NetPsySuite-NotifyPositionUpdateTiming-Section0 actions.

//! @SYMTestExpectedResults     The expected pos update requests and pos updates are received.

//! @SYMTestPriority            High

//! @SYMTestType                UT

//! @SYMTestStatus              Released

//! @SYMPREQ                    PREQ 1662

//! @SYMREQ                     REQ 11248, REQ 11249, REQ 11253, REQ 11254, REQ 11255, REQ 11487, REQ 11488, REQ 11489, REQ 11492, REQ 8827, REQ 8828, REQ 8829 

//! @SYMCreationDate            21/10/2008

//! @SYMAuthor                  NicolayB

RUN_TEST_STEP 100 te_lbsnetpsysuite NotifyPositionUpdateTiming c:\testdata\configs\te_lbsnetpsy.ini Section2

END_TESTCASE                  	LBS-NetPsySuite-NotifyPositionUpdateTiming-Section2

START_TESTCASE                	LBS-NetPsySuite-NotifyPositionUpdateErr-Section2

//! @SYMTestCaseID              LBS-NetPsySuite-NotifyPositionUpdateErr-Section2

//! @SYMTestCaseDesc            Runs several pos update scenarios with errors.

//! @SYMTestActions             See LBS-NetPsySuite-NotifyPositionUpdateErr-Section0 actions.

//! @SYMTestExpectedResults     The errors are handled correctly and the methods fail with the appropriate err codes.

//! @SYMTestPriority            High

//! @SYMTestType                UT

//! @SYMTestStatus              Released

//! @SYMPREQ                    PREQ 1662

//! @SYMREQ                     REQ 11248, REQ 11487, REQ 11492, REQ 8827, REQ 8828

//! @SYMCreationDate            21/10/2008

//! @SYMAuthor                  NicolayB

RUN_TEST_STEP 300 te_lbsnetpsysuite NotifyPositionUpdateErr c:\testdata\configs\te_lbsnetpsy.ini Section2

END_TESTCASE                  	LBS-NetPsySuite-NotifyPositionUpdateErr-Section2

PRINT COMPLETE ALL te_lbsnetpsysuite TESTS