// Copyright (c) 2006-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

//

PRINT TO DO: need to add correct PREQ/REQ numbers to these test cases:

PRINT *** DELETE LBS LOG ***

RUN_UTILS DeleteFile c:\private\101f401d\Logdbu.dat

LOAD_SUITE LbsMTLRTestServer -SharedData

PRINT Run LbsMTLRTestServer

PRINT

// Before we start LBS, select the test A-GPS integration module and network reg status txt file to use.

PRINT select the test A-GPS integration module to use (copy .ini file to appropriate place)

PREFIX RUN_UTILS

	MkDir c:\private\10282253\

	MkDir c:\private\10282253\lbs\

	MkDir c:\private\10282253\lbs\locmods\

	CopyFile c:\testdata\configs\xtestmodule.ini c:\private\10282253\lbs\locmods\agpsintegmodule.ini

        CopyFile c:\testdata\configs\lbstestprofile.ini c:\private\10282253\lbs\lbsprofile.ini 

        CopyFile c:\testdata\configs\lbstestconfig.txt c:\config.txt

	DeleteFile c:\private\10202be9\persists\1028224b.cre

REMOVE_PREFIX

RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_ResetDefaultAdmin

RUN_TEST_STEP 030 LbsMTLRTestServer LbsStep_SetPrivacyHandler c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr

RUN_TEST_STEP 030 LbsMTLRTestServer LbsStep_StartLbs

START_TESTCASE LBS-MTLR-PrivCntr-0001

//!@SYMTestCaseID			LBS-MTLR-PrivCntr-0001

//!@SYMTestCaseDesc		'Notify and Accept' request from network accepted

//!					This case also tests the logging API by verifying the relevant logs are written, can be read

//!					and as are expected. A self locate log, and external log and an assistance log.

//!

//!@SYMTestActions		

//!					1. Register as the privacy observer app. 

//!					2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify). 				

//!					3. Configure netSim (use ERequestAdviceNotify) and kick off an privacy request of type 'notify the user and automatically accept'.  

//!					4. When privacy controller is called (with ProcessNetworkLocationRequest()), accept the request (use RespondNetworkLocationRequest() ).

//!					5. Verify that 'accept' response is sent to the network

//!					6. When response to privacy request has been sent to network, kick off a network location request (via NetSim)

//!					7. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() and ProcessRequestComplete() are called

//!					8. Confirm that location is sent to network

//!

//!@SYMTestExpectedResults	Privacy request accepted and location sent to network

//!@SYMPREQ					PREQ 436

//!@SYMREQ					REQ 436.04

//!@SYMREQ					REQ 436.05

//!@SYMREQ					REQ 436.06

//!@SYMREQ					REQ 436.13

//!

//!@SYMPREQ					PREQ 162

//!@SYMREQ					162.05

//!@SYMREQ					162.06

//!

//!@SYMPREQ					PREQ 89

//!@SYMREQ					REQ 89.03

//!@SYMREQ					REQ 89.04

//!@SYMREQ					REQ 89.06

//!@SYMREQ					REQ 89.07

//!@SYMREQ					REQ 89.09

//!

//!@SYMTestType				CIT

//!@SYMTestPriority			1

//!@SYMTestStatus				Implemented. 

RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_ClearLog

RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos	c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position

RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0001

RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0001

END_TESTCASE LBS-MTLR-PrivCntr-0001

START_TESTCASE LBS-MTLR-PrivCntr-0002

//!@SYMTestCaseID			LBS-MTLR-PrivCntr-0002

//!@SYMTestCaseDesc		'Verify, Accept if no response' request from network accepted

//!

//!@SYMTestActions		

//!					1. Register as the privacy observer app. 

//!					2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify). 				

//!					3. Configure netSim (use ERequestAdviceVerify) and kick off an privacy request of type 'verify, accept'.  

//!					4. When privacy controller is called (with ProcessNetworkLocationRequest()), accept the request (use RespondNetworkLocationRequest() ).

//!					5. Verify that 'accept' response is sent to the network

//!					6. When response to privacy request has been sent to network, kick off a network location request (via NetSim)

//!					7. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() and ProcessRequestComplete() are called

//!					8. Confirm that location is sent to network

//!

//!@SYMTestExpectedResults	Privacy request accepted and location sent to network

//!@SYMPREQ					PREQ 436

//!@SYMREQ					

//!

//!@SYMPREQ					PREQ 162

//!@SYMREQ	

//!

//!@SYMPREQ					PREQ 89

//!@SYMREQ		

//!

//!@SYMTestType				CIT

//!@SYMTestPriority			1

//!@SYMTestStatus				Implemented. 

RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos	c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position

RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0002

RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo

END_TESTCASE LBS-MTLR-PrivCntr-0002

START_TESTCASE LBS-MTLR-PrivCntr-0003

//!@SYMTestCaseID			LBS-MTLR-PrivCntr-0003

//!@SYMTestCaseDesc		'Verify, Accept if no response' request from network rejected

//!

//!@SYMTestActions		

//!					1. Register as the privacy observer app. 

//!					2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify). 				

//!					3. Configure netSim (use ERequestAdviceVerify) and kick off an privacy request of type 'verify, accept'.  

//!					4. When privacy controller is called (with ProcessNetworkLocationRequest()), reject the request (use RespondNetworkLocationRequest() ).

//!					5. When privacy controller is called with ProcessRequestComplete(), verify that the reason is KErrNone

//!					6. Verify that 'rejected' response is sent to the network

//!

//!@SYMTestExpectedResults	Privacy request rejected

//!@SYMPREQ					PREQ 436

//!@SYMREQ					

//!

//!@SYMPREQ					PREQ 162

//!@SYMREQ	

//!

//!@SYMPREQ					PREQ 89

//!@SYMREQ		

//!

//!@SYMTestType				CIT

//!@SYMTestPriority			1

//!@SYMTestStatus				Implemented. 

RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos	c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position

RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0003

RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo

END_TESTCASE LBS-MTLR-PrivCntr-0003

//START_TESTCASE LBS-MTLR-PrivCntr-0004

//!@SYMTestCaseID			LBS-MTLR-PrivCntr-0004

//!@SYMTestCaseDesc		'Verify, Accept if no response' request from network ignored

//!

//!@SYMTestActions		

//!					1. Register as the privacy observer app. 

//!					2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify). 				

//!					3. Configure netSim (use ERequestAdviceVerify) and kick off an privacy request of type 'verify, accept'.  

//!					4. When privacy controller is called (with ProcessNetworkLocationRequest()), ignore the request (use RespondNetworkLocationRequest() ).

//!					5. Verify that 'accepted' response is sent to the network

//!					6. When response to privacy request has been sent to network, kick off a network location request (via NetSim)

//!					7. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() and ProcessRequestComplete() are called

//!					8. Confirm that location is sent to network

//!

//!@SYMTestExpectedResults	Undefined.

//!@SYMPREQ					PREQ 436

//!@SYMREQ					

//!

//!@SYMPREQ					PREQ 162

//!@SYMREQ	

//!

//!@SYMPREQ					PREQ 89

//!@SYMREQ		

//!

//!@SYMTestType				CIT

//!@SYMTestPriority			1

//!@SYMTestStatus				Implemented, Not Supported

//RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler

//RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position

//RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0004

//RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo

//END_TESTCASE LBS-MTLR-PrivCntr-0004

START_TESTCASE LBS-MTLR-PrivCntr-0006

//!@SYMTestCaseID			LBS-MTLR-PrivCntr-0006

//!@SYMTestCaseDesc		'Verify, Accept if no response' allowed to timeout

//!

//!@SYMTestActions		

//!					1. Register as the privacy observer app. 

//!					2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify). 				

//!					3. Configure netSim (use ERequestAdviceVerify) and kick off an privacy request of type 'verify, accept'.  

//!					4. When privacy controller is called (with ProcessNetworkLocationRequest()), do not respond

//!					5. Verify that 'accepted' response is sent to the network

//!					6. When response to privacy request has been sent to network, kick off a network location request (via NetSim)

//!					7. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() and ProcessRequestComplete() are called

//!					8. Confirm that location is sent to network

//!

//!@SYMTestExpectedResults	Privacy request is accepted and location is sent to network

//!@SYMPREQ					PREQ 436

//!@SYMREQ					

//!

//!@SYMPREQ					PREQ 162

//!@SYMREQ	

//!

//!@SYMPREQ					PREQ 89

//!@SYMREQ		

//!

//!@SYMTestType				CIT

//!@SYMTestPriority			1

//!@SYMTestStatus				Implemented. 

RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos 	c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position

RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0006

RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo

END_TESTCASE LBS-MTLR-PrivCntr-0006

START_TESTCASE LBS-MTLR-PrivCntr-0007

//!@SYMTestCaseID			LBS-MTLR-PrivCntr-0007

//!@SYMTestCaseDesc		Cancel location request before final result

//!

//!@SYMTestActions		

//!					1. Register as the privacy observer app. 

//!					2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify). 

//!					3. Configure netSim (use ERequestAdviceVerify) and kick off an privacy request of type 'verify, accept'.  

//!					4. When privacy controller is called (with ProcessNetworkLocationRequest()), accept the 

//!					   request (use RespondNetworkLocationRequest() ).

//!					5. Verify that 'accepted' response is sent to the network

//!					6. When response to privacy request has been sent to network, kick off a network location request (via NetSim)

//!					7. When ProcessNetworkPositionUpdate() is called for the first time (reference location), cancel the request 

//!					8. When privacy controller is called with ProcessRequestComplete(), verify that the reason is KErrNone

//!					9. Confirm that location is NOT sent to network

//!

//!@SYMTestExpectedResults	Location is never passed to network

//!@SYMPREQ					PREQ 436

//!@SYMREQ					

//!

//!@SYMPREQ					PREQ 162

//!@SYMREQ	

//!

//!@SYMPREQ					PREQ 89

//!@SYMREQ		

//!

//!@SYMTestType				CIT

//!@SYMTestPriority			1

//!@SYMTestStatus				Implemented. 

PRINT This test case can only be run with the test AGPS module, since it requires the module to be configure to stall

RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos	c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position

RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0007

RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo

END_TESTCASE LBS-MTLR-PrivCntr-0007

START_TESTCASE LBS-MTLR-PrivCntr-0008

//!@SYMTestCaseID			LBS-MTLR-PrivCntr-0008

//!@SYMTestCaseDesc			Negative test on RespondNetworkLocationRequest with incorrect parameter.

//!

//!@SYMTestActions		

//!					1. Register as the privacy observer app. 

//!					2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify). 

//!					3. Configure netSim (use ERequestAdviceVerify) and kick off an privacy requestof type 'verify, accept' with a valid Id.  

//!					4. When privacy controller is called (with ProcessNetworkLocationRequest()), respond to a 

//!					   request (use RequestNetworkLocationRequest() ) passing an invalid ID.

//!					5. Original privacy request with valid Id is processed 'as normal' (accepted and location request kicked off)

//!					

//!@SYMTestExpectedResults	

//!					Location expected to be sent to network. Response to 'bad'  request is ignored

//!

//!@SYMPREQ				PREQ 436

//!@SYMREQ				REQ 436.05

//!@SYMREQ				REQ 436.06

//!@SYMREQ				REQ 436.13

//!					

//!@SYMPREQ				PREQ 162

//!@SYMREQ	

//!					

//!@SYMPREQ				PREQ 89

//!@SYMREQ				REQ 89.04

//!

//!@SYMTestType				CIT

//!@SYMTestPriority			1

//!@SYMTestStatus			Implemented. Incomplete.

RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos	c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position

RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0008

RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo

END_TESTCASE LBS-MTLR-PrivCntr-0008

START_TESTCASE LBS-MTLR-PrivCntr-0009

//!@SYMTestCaseID			LBS-MTLR-PrivCntr-0009

//!@SYMTestCaseDesc			Negative test on CancelNetworkLocationRequest with incorrect parameter.

//!

//!@SYMTestActions		

//!					1. Register as the privacy observer app. 

//!					2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify). 

//!					3. Configure netSim (use ERequestAdviceVerify) and kick off an privacy requestof type 'verify, accept' with a valid Id.  

//!					4. When privacy controller is called (with ProcessNetworkLocationRequest()), cancel a 

//!					   request (use CancelNetworkLocationRequest() ) passing an invalid ID.

//!					5. Original privacy request with valid Id is processed 'as normal' (accepted and location request kicked off)

//!					

//!@SYMTestExpectedResults	

//!					Location expected to be sent to network. Cancelled 'bad' request is ignored

//!

//!

//!@SYMPREQ				PREQ 436

//!@SYMREQ				REQ 436.05

//!@SYMREQ				REQ 436.06

//!@SYMREQ				REQ 436.13

//!					

//!@SYMPREQ				PREQ 162

//!@SYMREQ	

//!					

//!@SYMPREQ				PREQ 89

//!@SYMREQ				REQ 89.04

//!					

//!@SYMTestType				CIT

//!@SYMTestPriority			1

//!@SYMTestStatus			Implemented. Incomplete.

RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos	c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position

RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0009

RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo

END_TESTCASE LBS-MTLR-PrivCntr-0009

START_TESTCASE LBS-MTLR-PrivCntr-0010

//!@SYMTestCaseID			LBS-MTLR-PrivCntr-0010

//!@SYMTestCaseDesc			Negative test on CancelNetworkLocationRequest called directly after RespondNetworkLocationRequest, with a bad ID.

//!

//!@SYMTestActions		

//!					1. Register as the privacy observer app. 

//!					2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify). 

//!					3. Configure netSim (use ERequestAdviceVerify) and kick off an privacy requestof type 'verify, accept' with a valid Id.  

//!					4. When privacy controller is called (with ProcessNetworkLocationRequest()), accept a 

//!					   request (use RequestNetworkLocationRequest() ) passing an invalid ID.

//!					5. Also call CancelNetworkLocationRequest passing an invalid ID.

//!					6. Original privacy request with valid Id is processed 'as normal' (accepted and location request kicked off)

//!					

//!@SYMTestExpectedResults	

//!					Location sent to network as normal. Cancel/Response of 'bad' request ignored

//!

//!@SYMPREQ				PREQ 436

//!@SYMREQ				REQ 436.05

//!@SYMREQ				REQ 436.06

//!@SYMREQ				REQ 436.13

//!					

//!@SYMPREQ				PREQ 162

//!@SYMREQ	

//!					

//!@SYMPREQ				PREQ 89

//!@SYMREQ				REQ 89.04

//!					

//!@SYMTestType				CIT

//!@SYMTestPriority			1

//!@SYMTestStatus			Implemented. Incomplete.

RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos	c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position

RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0010

RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo

END_TESTCASE LBS-MTLR-PrivCntr-0010

START_TESTCASE LBS-MTLR-PrivCntr-0011

//!@SYMTestCaseID			LBS-MTLR-PrivCntr-0011

//!@SYMTestCaseDesc			Negative test on CancelNetworkLocationRequest called directly after ProcessNetworkLocationRequest

//!

//!@SYMTestActions		

//!					1. Register as the privacy observer app. 

//!					2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify). 

//!					3. Configure netSim (use ERequestAdviceVerify) and kick off an privacy requestof type 'verify, accept' with a valid Id.  

//!					4. When privacy controller is called (with ProcessNetworkLocationRequest()), accept a 

//!					   request (use RequestNetworkLocationRequest() ) passing a valid ID.

//!					5. After ProcessNetworkLocationRequest() callback completes, we cancel a request passing a bad ID inside

//!					   ProcessNetworkPositionUpdate() during its first call for reference data.

//!					

//!@SYMTestExpectedResults

//!					Location sent to network. Cancel of 'bad' request is ignored

//!

//!@SYMPREQ				PREQ 436

//!@SYMREQ				REQ 436.05

//!@SYMREQ				REQ 436.06

//!@SYMREQ				REQ 436.13

//!					

//!@SYMPREQ				PREQ 162

//!@SYMREQ	

//!					

//!@SYMPREQ				PREQ 89

//!@SYMREQ				REQ 89.04

//!					

//!@SYMTestType				CIT

//!@SYMTestPriority			1

//!@SYMTestStatus			Implemented. Incomplete. 

RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos	c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position

RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0011

RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo

END_TESTCASE LBS-MTLR-PrivCntr-0011

START_TESTCASE LBS-MTLR-PrivCntr-0012

//!@SYMTestCaseID			LBS-MTLR-PrivCntr-0012

//!@SYMTestCaseDesc		Location request received after privacy request rejected

//!

//!@SYMTestActions		

//!					1. Register as the privacy observer app. 

//!					2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify). 

//!					3. Configure netSim (use ERequestAdviceVerify) and kick off an privacy request of type 'verify, accept'.  

//!					4. When privacy controller is called (with ProcessNetworkLocationRequest()), reject the request (use RespondNetworkLocationRequest() ).

//!					5. Verify that 'rejected' response is sent to the network

//!					6. Kick off a network location request (via NetSim)

//!					7. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() is not called

//!					8. When privacy controller is called with ProcessRequestComplete(), verify that the reason is KErrNone

//!					9. Confirm that control failure is sent to network with reason KErrPermissionDenied

//!

//!@SYMTestExpectedResults		Control failure is sent with reason KErrPermissionDenied

//!@SYMPREQ					PREQ 436

//!@SYMREQ					

//!

//!@SYMPREQ					PREQ 162

//!@SYMREQ		

//!

//!@SYMPREQ					PREQ 89

//!@SYMREQ					REQ 89.04

//!

//!@SYMTestType				CIT

//!@SYMTestPriority			2

//!@SYMTestStatus				Implemented. 

RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos	c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position

RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0012

RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo

END_TESTCASE LBS-MTLR-PrivCntr-0012

START_TESTCASE LBS-MTLR-PrivCntr-0013

//!@SYMTestCaseID			LBS-MTLR-PrivCntr-0013

//!@SYMTestCaseDesc		Silent request

//!

//!@SYMTestActions		

//!					1. Register as the privacy observer app. 

//!					2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify). 				

//!					3. Configure netSim and kick off a privacy request of type 'silent'(ERequestAdviceSilent).  

//!					4. When privacy controller is called (with ProcessNetworkLocationRequest()), accept the request (use RespondNetworkLocationRequest() ).

//!					5. Verify that 'accept' response is sent to the network

//!					6. When response to privacy request has been sent to network, kick off a network location request (via NetSim)

//!					7. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() and ProcessRequestComplete() are called

//!					8. Confirm that location is sent to network

//!

//!@SYMTestExpectedResults		Privacy request is accepted and location is sent to network

//!@SYMPREQ					PREQ 436

//!@SYMREQ					

//!

//!@SYMPREQ					PREQ 162

//!@SYMREQ		

//!

//!@SYMPREQ					PREQ 89

//!@SYMREQ					REQ 89.04

//!

//!@SYMTestType				CIT

//!@SYMTestPriority			2

//!@SYMTestStatus				Implemented. 

RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos	c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position

RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0013

RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo

END_TESTCASE LBS-MTLR-PrivCntr-0013

START_TESTCASE LBS-MTLR-PrivCntr-0014

//!@SYMTestCaseID			LBS-MTLR-PrivCntr-0014

//!@SYMTestCaseDesc		Request when external locate turned off in admin

//!

//!@SYMTestActions		

//!					1. Register as the privacy observer app. 

//!					2. Change admin settings (use EExternalLocateOff) to disallow MT-LRs and wait for this to propogate (verify). 				

//!					3. Configure netSim and kick off a privacy request.  

//!					4. Verify that the privacy controller callbacks are not called

//!					5. Confirm that location is not sent to network

//!

//!@SYMTestExpectedResults		Privacy controller is never called and location not sent to network

//!@SYMPREQ					PREQ 436

//!@SYMREQ					

//!

//!@SYMPREQ					PREQ 162

//!@SYMREQ		

//!

//!@SYMPREQ					PREQ 89

//!@SYMREQ					REQ 89.04

//!

//!@SYMTestType				CIT

//!@SYMTestPriority			2

//!@SYMTestStatus				Implemented. 

RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos	c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position

RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0014

RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo

END_TESTCASE LBS-MTLR-PrivCntr-0014

START_TESTCASE LBS-MTLR-PrivCntr-0015

//!@SYMTestCaseID			LBS-MTLR-PrivCntr-0015

//!@SYMTestCaseDesc		'Verify, Reject if no response' allowed to timeout

//!

//!@SYMTestActions		

//!					1. Register as the privacy observer app.