//

// Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

//

/////////////////////////////////////////////////////////////////

//! @file

//! @SYMScriptAuthor        divakare

//! @SYMTestSuiteName       ns-ipsec-multiple-sa

//! @SYMScriptCreationDate  Fri Nov 14 16:04:14 IST 2008

/////////////////////////////////////////////////////////////////

PRINT Run test case(s) for suite ns-ipsec-multiple-sa

// ToDo: Remember to load the relevant suite before starting any test case(s)

LOAD_SUITE	t_ipsec  -SharedData

RUN_UTILS CopyFile z:\testdata\configs\ethernetced1853.xml c:\ethernetced1853.xml

RUN_UTILS MakeReadWrite c:\ethernetced1853.xml

RUN_PROGRAM -1 ced c:\ethernetced1853.xml

//Create private folder

RUN_UTILS MkDir c:\private\101f7993\

//copy linux_tunnel.pin file from data folder to private folder - one time job

RUN_UTILS CopyFile z:\testdata\configs\linux_tunnel.pin c:\private\101f7993\linux_tunnel.pin

RUN_UTILS MakeReadWrite c:\private\101f7993\linux_tunnel.pin

//copy epoc2linux.xml file from data folder to c: drive - one time job

RUN_UTILS CopyFile z:\testdata\configs\epoc2linux.xml c:\epoc2linux.xml

RUN_UTILS MakeReadWrite c:\epoc2linux.xml

START_TESTCASE NET-IPSec-Multiple_SA_Proposal-001

//! @SYMTestCaseID          NET-IPSec-Multiple_SA_Proposal-001

//! @SYMCreationDate        19-09-2008

//! @SYMAuthor              DivakarE

//! @SYMTestCaseDesc        Test to check if the multiple SA proposal functionality works for the following.

//!                         

//!                         Multiple IKE SA proposals.

//!                         Single IPSec SA proposal.

//!                         

//!                         The negotiation carried out using,

//!                         Phase 1 :Main mode

//!                         Phase 2 :Quick mode

//!                         

//!                         Phase 2 Encapsulation Mode - Tunnel Mode

//!                         Security Protocol - ESP

//!                         

//!                         All the IPSec SA proposals in the policy file are for the security protocol ESP.

//!                         

//!                         Remote host supports the first proposal mentioned.

//! @SYMTestExpectedResults The most preferred IKE SA proposal is stated in the beginning.

//!                         

//!                         The first IKE SA proposal should be negotiated between the peers. This is because the remote host supports the first proposal.

//!                         

//!                         There is only one IPSec SA proposal. This is the IPSec SA proposal negotiated between the peers.

//! @SYMTestActions         The most prefered proposal is always placed in the beginning.

//!                         

//!                         There are multiple IKE SA proposals.

//!                         

//!                         There is only one IPSec SA proposal.

//!                         

//!                         The remote host is configured to support the first IKE SA proposal.

//!                         

//!                         The negotiation is carried out using,

//!                         Main mode and Quick mode

//!                         

//!                         Once the SA proposals are negotiated between the peers both for IKE and IPSec, this SA is compared with the expected result.

//! @SYMREQ                 REQ10660

//!                         REQ10661

//!                         REQ10967

	RUN_UTILS DeleteFile c:\private\101f7993\linux_tunnel.pol

	RUN_UTILS CopyFile z:\TestData\configs\linux_tunnel13.pol c:\private\101f7993\linux_tunnel.pol

	RUN_UTILS MakeReadWrite c:\private\101f7993\linux_tunnel.pol

	//run batch file to ping the linux machine. Pol file is change, so need ceding again.

	RUN_PROGRAM -1 ced c:\epoc2linux.xml

	START_TEST_BLOCK    100     t_ipsec     z:\testdata\scripts\ns-ipsec-multiplesatest-ops.ini

	        CREATE_OBJECT   IPSecMultipleSATestWrapper    MultipleSATestWrapperSection

	        COMMAND     MultipleSATestWrapperSection  New

	        COMMAND     MultipleSATestWrapperSection  TestMultipleSA MultipleSAParamSection

	END_TEST_BLOCK

END_TESTCASE NET-IPSec-Multiple_SA_Proposal-001

START_TESTCASE NET-IPSec-Multiple_SA_Proposal-002

//! @SYMTestCaseID          NET-IPSec-Multiple_SA_Proposal-002

//! @SYMCreationDate        19-09-2008

//! @SYMAuthor              DivakarE

//! @SYMTestCaseDesc        Test to check if the multiple SA proposal functionality works for the following.

//!                         

//!                         Multiple IKE SA proposals.

//!                         Single IPSec SA proposal.

//!                         

//!                         The negotiation is carried out using,

//!                         Phase 1 :Main mode

//!                         Phase 2 :Quick mode

//!                         

//!                         Phase 2 Encapsulation Mode - Tunnel Mode

//!                         Security Protocol - ESP

//!                         

//!                         The IPSec SA proposals in the policy file are for the security protocol ESP.

//!                         

//!                         Remote host does not support the first proposal mentioned.

//! @SYMTestExpectedResults The most preferred IKE SA proposal is stated in the beginning.

//!                         

//!                         The next preferred proposal in the list is negotiated between the peers.

//!                         

//!                         There is only one IPSec SA proposal. This is the IPSec SA proposal negotiated between the peers.

//! @SYMTestActions         There are multiple IKE SA proposals.

//!                         

//!                         There is only one IPSec SA proposal.

//!                         

//!                         The remote host is configured such that it does not support the first IKE SA proposal.

//!                         

//!                         The negotiation is carried out using,

//!                         Main Mode and Quick mode

//!                         

//!                         Once the SA proposals are negotiated between the peers both for IKE and IPSec, this SA is compared with the expected result.

//! @SYMREQ                 REQ10660

//!                         REQ10661

//!                         REQ10967

	RUN_UTILS DeleteFile c:\private\101f7993\linux_tunnel.pol

	RUN_UTILS CopyFile z:\TestData\configs\linux_tunnel14.pol c:\private\101f7993\linux_tunnel.pol

	RUN_UTILS MakeReadWrite c:\private\101f7993\linux_tunnel.pol

	//run batch file to ping the linux machine. Pol file is change, so need ceding again.

	RUN_PROGRAM -1 ced c:\epoc2linux.xml

	START_TEST_BLOCK    100     t_ipsec     z:\testdata\scripts\ns-ipsec-multiplesatest-ops.ini

	        CREATE_OBJECT   IPSecMultipleSATestWrapper    MultipleSATestWrapperSection

	        COMMAND     MultipleSATestWrapperSection  New

	        COMMAND     MultipleSATestWrapperSection  TestMultipleSA MultipleSAParamSection

	END_TEST_BLOCK

END_TESTCASE NET-IPSec-Multiple_SA_Proposal-002

START_TESTCASE NET-IPSec-Multiple_SA_Proposal-003

//! @SYMTestCaseID          NET-IPSec-Multiple_SA_Proposal-003

//! @SYMCreationDate        19-09-2008

//! @SYMAuthor              DivakarE

//! @SYMTestCaseDesc        Test to check if the multiple SA proposal functionality works for the following.

//!                         

//!                         Multiple IKE SA proposals.

//!                         Single IPSec SA proposal.

//!                         

//!                         The negotiation is carried out using,

//!                         Phase 1 :Main mode

//!                         Phase 2 :Quick mode

//!                         

//!                         Phase 2 Encapsulation Mode - Tunnel Mode

//!                         Security Protocol - ESP

//!                         

//!                         This test case is to test if the IKE SA negotiation works for a different combination of algorithms provided.

//!                         

//!                         The last IKE SA proposal is the only one supported by the remote host.

//!                         

//!                         The last IKE SA proposal in the list is negotiated between the peers.

//!                         

//!                         The IPSec SA proposals in the policy file are for the security protocol ESP.

//! @SYMTestExpectedResults The most preferred IKE SA proposal is stated in the beginning.

//!                         

//!                         The last IKE SA proposal should be negotiated between the peers. This is because the remote host supports the first proposal.

//!                         

//!                         There is only one IPSec SA proposal. This is the IPSec SA proposal negotiated between the peers.

//! @SYMTestActions         There are multiple IKE SA proposals.

//!                         

//!                         There is only one IPSec SA proposal.

//!                         

//!                         The remote host is configured to support the last IKE SA proposal.

//!                         

//!                         The negotiation is carried out using,

//!                         Aggressive mode and Quick mode

//!                         

//!                         Once the SA proposals are negotiated between the peers both for IKE and IPSec, this SA is compared with the expected result.

//! @SYMREQ                 REQ10660

//!                         REQ10661

//!                         REQ10967

	RUN_UTILS DeleteFile c:\private\101f7993\linux_tunnel.pol

	RUN_UTILS CopyFile z:\TestData\configs\linux_tunnel15.pol c:\private\101f7993\linux_tunnel.pol

	RUN_UTILS MakeReadWrite c:\private\101f7993\linux_tunnel.pol

	//run batch file to ping the linux machine. Pol file is change, so need ceding again.

	RUN_PROGRAM -1 ced c:\epoc2linux.xml

	START_TEST_BLOCK    100     t_ipsec     z:\testdata\scripts\ns-ipsec-multiplesatest-ops.ini

	        CREATE_OBJECT   IPSecMultipleSATestWrapper    MultipleSATestWrapperSection

	        COMMAND     MultipleSATestWrapperSection  New

	        COMMAND     MultipleSATestWrapperSection  TestMultipleSA MultipleSAParamSection

	END_TEST_BLOCK

END_TESTCASE NET-IPSec-Multiple_SA_Proposal-003

START_TESTCASE NET-IPSec-Multiple_SA_Proposal-004

//! @SYMTestCaseID          NET-IPSec-Multiple_SA_Proposal-004

//! @SYMCreationDate        19-09-2008

//! @SYMAuthor              DivakarE

//! @SYMTestCaseDesc        Test to check if the multiple SA proposal functionality works for the following.

//!                         

//!                         Multiple IKE SA proposals. Sompe invalid proposals present. (First proposal is invalid : May be with a wrong Syntax).

//!                         Single IPSec SA proposal.

//!                         

//!                         The negotiation is carried out using,

//!                         Phase 1 :Main mode

//!                         Phase 2 :Quick mode

//!                         

//!                         Phase 2 Encapsulation Mode - Tunnel Mode

//!                         Security Protocol - ESP

//!                         

//!                         The IPSec SA proposals in the policy file are for the security protocol ESP.

//!                         

//!                         The invalid proposal is ignored and the next preferred proposal in the list is negotiated between the peers.

//! @SYMTestExpectedResults The first invalid proposal is ignored and a valid SA proposal negotiated between the peers.

//! @SYMTestActions         There are multiple IKE SA proposals.

//!                         

//!                         There is only one IPSec SA proposal.

//!                         

//!                         The negotiation is carried out using,

//!                         Main mode and Quick mode

//!                         

//!                         The first invalid proposal is ignored and a valid SA proposal is negotiated between the peers.

//!                         

//!                         Once the SA proposals are negotiated between the peers both for IKE and IPSec, this SA is compared with the expected result.

//! @SYMREQ                 REQ10660

//!                         REQ10661

//!                         REQ10967

	RUN_UTILS DeleteFile c:\private\101f7993\linux_tunnel.pol

	RUN_UTILS CopyFile z:\TestData\configs\linux_tunnel16.pol c:\private\101f7993\linux_tunnel.pol

	RUN_UTILS MakeReadWrite c:\private\101f7993\linux_tunnel.pol

	//run batch file to ping the linux machine. Pol file is change, so need ceding again.

	RUN_PROGRAM -1 ced c:\epoc2linux.xml

	START_TEST_BLOCK    100     t_ipsec     z:\testdata\scripts\ns-ipsec-multiplesatest-ops.ini

	        CREATE_OBJECT   IPSecMultipleSATestWrapper    MultipleSATestWrapperSection

	        COMMAND     MultipleSATestWrapperSection  New

	        COMMAND     MultipleSATestWrapperSection  TestMultipleSA MultipleSAParamSection

	END_TEST_BLOCK

END_TESTCASE NET-IPSec-Multiple_SA_Proposal-004

START_TESTCASE NET-IPSec-Multiple_SA_Proposal-005

//! @SYMTestCaseID          NET-IPSec-Multiple_SA_Proposal-005

//! @SYMCreationDate        19-09-2008

//! @SYMAuthor              DivakarE

//! @SYMTestCaseDesc        Test to check if the multiple SA proposal functionality works for the following.

//!                         

//!                         Multiple IKE SA proposals. Sompe invalid proposals present. (Invalid proposal in the middle : May be with a wrong Syntax)

//!                         Single IPSec SA proposal.

//!                         

//!                         The negotiation is carried out using,

//!                         Phase 1 :Main mode

//!                         Phase 2 :Quick mode

//!                         

//!                         Phase 2 Encapsulation Mode - Tunnel Mode

//!                         Security Protocol - ESP

//!                         

//!                         The remote machine is configured such that it supports the first IKE SA proposal in the list.

//!                         

//!                         The IPSec SA proposals in the policy file are for the security protocol ESP.

//!                         

//!                         The first IKE SA proposal is negotiated between the peers ignoring the invalid proposal.

//! @SYMTestExpectedResults The preferred valid proposal in the list of proposals is negotiated between the peers.

//! @SYMTestActions         There are multiple IKE SA proposals.

//!                         

//!                         There is only one IPSec SA proposal.

//!                         

//!                         The negotiation is carried out using,

//!                         Main mode and Quick mode

//!                         

//!                         The preferred valid proposal in the list of proposals is negotiated between the peers.

//!                         

//!                         Once the SA proposals are negotiated between the peers both for IKE and IPSec, this SA is compared with the expected result.

//! @SYMREQ                 REQ10660

//!                         REQ10661

//!                         REQ10967

	RUN_UTILS DeleteFile c:\private\101f7993\linux_tunnel.pol

	RUN_UTILS CopyFile z:\TestData\configs\linux_tunnel17.pol c:\private\101f7993\linux_tunnel.pol

	RUN_UTILS MakeReadWrite c:\private\101f7993\linux_tunnel.pol

	//run batch file to ping the linux machine. Pol file is change, so need ceding again.

	RUN_PROGRAM -1 ced c:\epoc2linux.xml

	START_TEST_BLOCK    100     t_ipsec     z:\testdata\scripts\ns-ipsec-multiplesatest-ops.ini

	        CREATE_OBJECT   IPSecMultipleSATestWrapper    MultipleSATestWrapperSection

	        COMMAND     MultipleSATestWrapperSection  New

	        COMMAND     MultipleSATestWrapperSection  TestMultipleSA MultipleSAParamSection

	END_TEST_BLOCK

END_TESTCASE NET-IPSec-Multiple_SA_Proposal-005

START_TESTCASE NET-IPSec-Multiple_SA_Proposal-006

//! @SYMTestCaseID          NET-IPSec-Multiple_SA_Proposal-006

//! @SYMCreationDate        19-09-2008

//! @SYMAuthor              DivakarE

//! @SYMTestCaseDesc        Test to check if the multiple SA proposal functionality works for the following.

//!                         

//!                         Multiple IKE SA proposals. Sompe invalid proposals present. (Invalid proposal in the end).

//!                         Single IPSec SA proposal.

//!                         

//!                         The negotiation is carried out using,

//!                         Phase 1 :Main mode

//!                         Phase 2 :Quick mode

//!                         

//!                         Phase 2 Encapsulation Mode - Tunnel Mode

//!                         Security Protocol - ESP

//!                         

//!                         The IPSec SA proposals in the policy file are for the security protocol ESP.

//! @SYMTestExpectedResults The preferred valid proposals in the list is negotiated.

//! @SYMTestActions         There are multiple IKE SA proposals.

//!                         

//!                         There is only one IPSec SA proposal.

//!                         

//!                         The negotiation is carried out using,

//!                         Main mode and Quick mode

//!                         

//!                         The preferred valid proposal in the list of proposals is negotiated between the peers.

//!                         

//!                         Once the SA proposals are negotiated between the peers both for IKE and IPSec, this SA is compared with the expected result.

//! @SYMREQ                 REQ10660

//!                         REQ10661

//!                         REQ10967

	RUN_UTILS DeleteFile c:\private\101f7993\linux_tunnel.pol

	RUN_UTILS CopyFile z:\TestData\configs\linux_tunnel18.pol c:\private\101f7993\linux_tunnel.pol

	RUN_UTILS MakeReadWrite c:\private\101f7993\linux_tunnel.pol

	//run batch file to ping the linux machine. Pol file is change, so need ceding again.

	RUN_PROGRAM -1 ced c:\epoc2linux.xml

	START_TEST_BLOCK    100     t_ipsec     z:\testdata\scripts\ns-ipsec-multiplesatest-ops.ini

	        CREATE_OBJECT   IPSecMultipleSATestWrapper    MultipleSATestWrapperSection

	        COMMAND     MultipleSATestWrapperSection  New

	        COMMAND   !Error=-5197  MultipleSATestWrapperSection  NegativeTestMultipleSA MultipleSAParamSection

	END_TEST_BLOCK

END_TESTCASE NET-IPSec-Multiple_SA_Proposal-006

START_TESTCASE NET-IPSec-Multiple_SA_Proposal-007

//! @SYMTestCaseID          NET-IPSec-Multiple_SA_Proposal-007

//! @SYMCreationDate        19-09-2008

//! @SYMAuthor              DivakarE

//! @SYMTestCaseDesc        Test to check if the multiple SA proposal functionality works for the following.

//!                         

//!                         Single IKE SA proposals.

//!                         Multiple IPSec SA proposal.

//!                         

//!                         The negotiation carried out using,

//!                         Phase 1 :Main mode

//!                         Phase 2 :Quick mode

//!                         

//!                         Phase 2 Encapsulation Mode - Tunnel Mode

//!                         Security Protocol - ESP

//!                         

//!                         Remote host supports the first proposal mentioned.

//!                         

//!                         All the IPSec SA proposals in the policy file are for the security protocol ESP.

//!                         

//!                         The first valid IPSec SA proposal is negotiated between the peers.

//! @SYMTestExpectedResults The most prefered proposal is always placed in the beginning.

//!                         

//!                         The first IPSec SA proposal is negotiated between the peers.

//! @SYMTestActions         There are multiple IPSec SA proposals.

//!                         

//!                         There is only one IKE SA proposal.

//!                         

//!                         The remote host is configured to support the first IPsec SA proposal.

//!                         

//!                         The negotiation is carried out using,

//!                         Main mode and Quick mode

//!                         

//!                         Once the SA proposals are negotiated between the peers both for IKE and IPSec, this SA is compared with the expected result.

//! @SYMREQ                 REQ10660

//!                         REQ10661

//!                         REQ10967

	RUN_UTILS DeleteFile c:\private\101f7993\linux_tunnel.pol

	RUN_UTILS CopyFile z:\TestData\configs\linux_tunnel19.pol c:\private\101f7993\linux_tunnel.pol

	RUN_UTILS MakeReadWrite c:\private\101f7993\linux_tunnel.pol

	//run batch file to ping the linux machine. Pol file is change, so need ceding again.

	RUN_PROGRAM -1 ced c:\epoc2linux.xml

	START_TEST_BLOCK    100     t_ipsec     z:\testdata\scripts\ns-ipsec-multiplesatest-ops.ini

	        CREATE_OBJECT   IPSecMultipleSATestWrapper    MultipleSATestWrapperSection

	        COMMAND     MultipleSATestWrapperSection  New

	        COMMAND   !Error=-5197  MultipleSATestWrapperSection  NegativeTestMultipleSA MultipleSAParamSection

	END_TEST_BLOCK

END_TESTCASE NET-IPSec-Multiple_SA_Proposal-007

START_TESTCASE NET-IPSec-Multiple_SA_Proposal-008

//! @SYMTestCaseID          NET-IPSec-Multiple_SA_Proposal-008

//! @SYMCreationDate        19-09-2008

//! @SYMAuthor              DivakarE

//! @SYMTestCaseDesc        Test to check if the multiple SA proposal functionality works for the following.

//!                         

//!                         Single IKE SA proposals.

//!                         Multiple IPSec SA proposal.

//!                         

//!                         The negotiation carried out using,

//!                         Phase 1 :Main mode

//!                         Phase 2 :Quick mode

//!                         

//!                         Phase 2 Encapsulation Mode - Tunnel Mode

//!                         Security Protocol - ESP

//!                         

//!                         Remote host does not support the first proposal mentioned.

//!                         

//!                         All the IPSec SA proposals in the policy file are for the security protocol ESP.

//!                         

//!                         The next preferred proposal in the list is negotiated between the peers.

//! @SYMTestExpectedResults The first valid IPSec SA proposal specified in the list is negotiated between the peers.

//!                         

//!                         Here the remote host does not support the first IPSec SA in the list. Hence the next valid IPSec SA is negotiated.

//! @SYMTestActions         There are multiple IKE SA proposals.

//!                         

//!                         There is only one IPSec SA proposal.

//!                         

//!                         The remote host is configured such that it does not support the first IKE SA proposal.

//!                         

//!                         The negotiation may be carried out using 2 combinations of modes. They are,

//!                         1.) Main mode and Quick mode

//!                         2.)Aggressive mode and Quick mode

//!                         

//!                         Once the SA proposals are negotiated between the peers both for IKE and IPSec, this SA is compared with the expected result.

//! @SYMREQ                 REQ10660

//!                         REQ10661

//!                         REQ10967

	RUN_UTILS DeleteFile c:\private\101f7993\linux_tunnel.pol

	RUN_UTILS CopyFile z:\TestData\configs\linux_tunnel20.pol c:\private\101f7993\linux_tunnel.pol

	RUN_UTILS MakeReadWrite c:\private\101f7993\linux_tunnel.pol

	//run batch file to ping the linux machine. Pol file is change, so need ceding again.

	RUN_PROGRAM -1 ced c:\epoc2linux.xml

	START_TEST_BLOCK    100     t_ipsec     z:\testdata\scripts\ns-ipsec-multiplesatest-ops.ini

	        CREATE_OBJECT   IPSecMultipleSATestWrapper    MultipleSATestWrapperSection

	        COMMAND     MultipleSATestWrapperSection  New

	        COMMAND   !Error=-5197  MultipleSATestWrapperSection  NegativeTestMultipleSA MultipleSAParamSection

	END_TEST_BLOCK

END_TESTCASE NET-IPSec-Multiple_SA_Proposal-008

START_TESTCASE NET-IPSec-Multiple_SA_Proposal-009

//! @SYMTestCaseID          NET-IPSec-Multiple_SA_Proposal-009

//! @SYMCreationDate        19-09-2008

//! @SYMAuthor              DivakarE

//! @SYMTestCaseDesc        Test to check if the multiple SA proposal functionality works for the following.

//!                         

//!                         Single IKE SA proposals.

//!                         Multiple IPSec SA proposal.

//!                         

//!                         The negotiation carried out using,

//!                         Phase 1 :Main mode

//!                         Phase 2 :Quick mode

//!                         

//!                         Phase 2 Encapsulation Mode - Tunnel Mode

//!                         Security Protocol - ESP

//!                         

//!                         This test case is to test if the IPsec SA negotiation works for a different combination of algorithms provided.

//!                         

//!                         The last IPSec SA proposal is the only one supported by the remote host.

//!                         

//!                         All the IPSec SA proposals in the policy file are for the security protocol ESP.

//!                         

//!                         The last IPSec SA proposal in the list is negotiated between the peers.

//! @SYMTestExpectedResults The first IPSec SA proposal should be negotiated between the peers.

//!                         

//!                         The remote host should support the first IPSec SA.

//! @SYMTestActions         A valid SA proposal is negotiated between the peers.

//!                         

//!                         There are multiple IPSec SA proposals.

//!                         

//!                         There is only one IKE SA proposal.

//!                         

//!                         The negotiation is carried out using,

//!                         Aggressive mode and Quick mode

//!                         

//!                         The preferred valid proposal in the list of proposals is negotiated between the peers.

//!                         

//!                         Once the SA proposals are negotiated between the peers both for IKE and IPSec, this SA is compared with the expected result.

//! @SYMREQ                 REQ10660

//!                         REQ10661

//!                         REQ10967

	RUN_UTILS DeleteFile c:\private\101f7993\linux_tunnel.pol

	RUN_UTILS CopyFile z:\TestData\configs\linux_tunnel21.pol c:\private\101f7993\linux_tunnel.pol

	RUN_UTILS MakeReadWrite c:\private\101f7993\linux_tunnel.pol

	//run batch file to ping the linux machine. Pol file is change, so need ceding again.

	RUN_PROGRAM -1 ced c:\epoc2linux.xml

	START_TEST_BLOCK    100     t_ipsec     z:\testdata\scripts\ns-ipsec-multiplesatest-ops.ini

	        CREATE_OBJECT   IPSecMultipleSATestWrapper    MultipleSATestWrapperSection

	        COMMAND     MultipleSATestWrapperSection  New

	        COMMAND   !Error=-5197  MultipleSATestWrapperSection  NegativeTestMultipleSA MultipleSAParamSection

	END_TEST_BLOCK

END_TESTCASE NET-IPSec-Multiple_SA_Proposal-009

START_TESTCASE NET-IPSec-Multiple_SA_Proposal-010

//! @SYMTestCaseID          NET-IPSec-Multiple_SA_Proposal-010

//! @SYMCreationDate        19-09-2008

//! @SYMAuthor              DivakarE

//! @SYMTestCaseDesc        Test to check if the multiple SA proposal functionality works for the following.

//!                         

//!                         Single IKE SA proposal.

//!                         Multiple IPSec SA proposal. Sompe invalid proposals present. (First proposal is invalid : May be with a wrong Syntax).

//!                         

//!                         The negotiation is carried out using,

//!                         Phase 1 :Main mode

//!                         Phase 2 :Quick mode

//!                         

//!                         Phase 2 Encapsulation Mode - Tunnel Mode

//!                         Security Protocol - ESP

//!                         

//!                         All the IPSec SA proposals in the policy file are for the security protocol ESP.

//!                         

//!                         The invalid proposal is ignored and the next preferred proposal in the list is negotiated between the peers.

//! @SYMTestExpectedResults The valid SA proposal is negotiated between the peers.

//! @SYMTestActions         There are multiple IPSec SA proposals.

//!                         

//!                         There is only one IKE SA proposal.

//!                         

//!                         The negotiation is carried out using,

//!                         Main mode and Quick mode

//!                         

//!                         The first invalid proposal is ignored and a valid SA proposal is negotiated between the peers.

//!                         

//!                         Once the SA proposals are negotiated between the peers both for IKE and IPSec, this SA is compared with the expected result.