/* Portions Copyright (c) 2005-2007 Nokia Corporation and/or its subsidiary(-ies).

 * All rights reserved.

 */

/** 

@file

@publishedAll

@externallyDefinedApi

*/

/* zlib.h -- interface of the 'zlib' general purpose compression library

  version 1.2.3, July 18th, 2005

  Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler

  This software is provided 'as-is', without any express or implied

  warranty.  In no event will the authors be held liable for any damages

  arising from the use of this software.

  Permission is granted to anyone to use this software for any purpose,

  including commercial applications, and to alter it and redistribute it

  freely, subject to the following restrictions:

  1. The origin of this software must not be misrepresented; you must not

     claim that you wrote the original software. If you use this software

     in a product, an acknowledgment in the product documentation would be

     appreciated but is not required.

  2. Altered source versions must be plainly marked as such, and must not be

     misrepresented as being the original software.

  3. This notice may not be removed or altered from any source distribution.

  Jean-loup Gailly        Mark Adler

  jloup@gzip.org          madler@alumni.caltech.edu

  The data format used by the zlib library is described by RFCs (Request for

  Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt

  (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).

*/

#ifndef _ZLIB_H

#define _ZLIB_H

#if (defined(__TOOLS2__) || defined(__TOOLS__))

	// A tools build picks up the zconf.h file from the user include path

	#include "zconf.h"

#else

	// Any other build picks up zconf.h from stdapis system include directory

	#include <zconf.h> 

#endif

#ifdef __cplusplus

	extern "C" {

#endif

/** Zlib version */

#define ZLIB_VERSION "1.2.3"

/** Zlib version Number */

#define ZLIB_VERNUM 0x1230

/**

     The 'zlib' compression library provides in-memory compression and

  decompression functions, including integrity checks of the uncompressed

  data.  This version of the library supports only one compression method

  (deflation) but other algorithms will be added later and will have the same

  stream interface.

     Compression can be done in a single step if the buffers are large

  enough (for example if an input file is mmap'ed), or can be done by

  repeated calls of the compression function.  In the latter case, the

  application must provide more input and/or consume the output

  (providing more output space) before each call.

     The compressed data format used by default by the in-memory functions is

  the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped

  around a deflate stream, which is itself documented in RFC 1951.

     The library also supports reading and writing files in gzip (.gz) format

  with an interface similar to that of stdio using the functions that start

  with "gz".  The gzip format is different from the zlib format.  gzip is a

  gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.

     This library can optionally read and write gzip streams in memory as well.

     The zlib format was designed to be compact and fast for use in memory

  and on communications channels.  The gzip format was designed for single-

  file compression on file systems, has a larger header than zlib to maintain

  directory information, and uses a different, slower check method than zlib.

     The library does not install any signal handler. The decoder checks

  the consistency of the compressed data, so the library should never

  crash even in case of corrupted input.

*/

/** Function pointer - used to allocate the internal state */

typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));

/** Function pointer - used to free the internal state */

typedef void   (*free_func)  OF((voidpf opaque, voidpf address));

struct internal_state;

/**

	Encapsulates a zip stream

*/

typedef struct z_stream_s {

	/** Next input byte */

    Bytef    *next_in;  

    /** Number of bytes available at next_in */

    uInt     avail_in;  

    /** Total nb of input bytes read so far */

    uLong    total_in;  

    /** Next output byte should be put there */

    Bytef    *next_out; 

    /** Remaining free space at next_out */

    uInt     avail_out; 

    /** Total nb of bytes output so far */

    uLong    total_out; 

    /** Last error message, NULL if no error */

    char     *msg;      

    /** Not visible by applications */

    struct internal_state FAR *state; 

    /** Used to allocate the internal state */

    alloc_func zalloc;  

    /** Used to free the internal state */

    free_func  zfree;   

    /** Private data object passed to zalloc and zfree */

    voidpf     opaque;  

    /** Best guess about the data type: binary or text */

    int     data_type;  

    /** Adler32 value of the uncompressed data */

    uLong   adler;      

    /** Reserved for future use */

    uLong   reserved;   

} z_stream;

/** typedef z_stream* as z_streamp. Refer to z_stream_s for more details */

typedef z_stream FAR *z_streamp;

/**

     gzip header information passed to and from zlib routines.  See RFC 1952

  for more details on the meanings of these fields.

*/

typedef struct gz_header_s {

	/** True if compressed data believed to be text */

    int     text;       

    /** Modification time */

    uLong   time;       

    /** Extra flags (not used when writing a gzip file) */

    int     xflags;     

    /** Operating system */

    int     os;         

    /** Pointer to extra field or Z_NULL if none */

    Bytef   *extra;     

    /** Extra field length (valid if extra != Z_NULL) */

    uInt    extra_len;  

    /** Space at extra (only when reading header) */

    uInt    extra_max;  

    /** Pointer to zero-terminated file name or Z_NULL */

    Bytef   *name;      

    /** Space at name (only when reading header) */

    uInt    name_max;   

    /** Pointer to zero-terminated comment or Z_NULL */

    Bytef   *comment;   

    /** Space at comment (only when reading header) */

    uInt    comm_max;   

    /** True if there was or will be a header crc */

    int     hcrc;       

    /** True when done reading gzip header (not used when writing a gzip file) */

    int     done;   

} gz_header;

/** gz_headerp is typedef gz_header* */

typedef gz_header FAR *gz_headerp;

/*

   The application must update next_in and avail_in when avail_in has

   dropped to zero. It must update next_out and avail_out when avail_out

   has dropped to zero. The application must initialize zalloc, zfree and

   opaque before calling the init function. All other fields are set by the

   compression library and must not be updated by the application.

   The opaque value provided by the application will be passed as the first

   parameter for calls of zalloc and zfree. This can be useful for custom

   memory management. The compression library attaches no meaning to the

   opaque value.

   zalloc must return Z_NULL if there is not enough memory for the object.

   If zlib is used in a multi-threaded application, zalloc and zfree must be

   thread safe.

   On 16-bit systems, the functions zalloc and zfree must be able to allocate

   exactly 65536 bytes, but will not be required to allocate more than this

   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,

   pointers returned by zalloc for objects of exactly 65536 bytes *must*

   have their offset normalized to zero. The default allocation function

   provided by this library ensures this (see zutil.c). To reduce memory

   requirements and avoid any allocation of 64K objects, at the expense of

   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).

   The fields total_in and total_out can be used for statistics or

   progress reports. After compression, total_in holds the total size of

   the uncompressed data and may be saved for use in the decompressor

   (particularly if the decompressor wants to decompress everything in

   a single step).

*/

                        /* constants */

/** Allowed flush values; see deflate() and inflate() below for details */

#define Z_NO_FLUSH      0

/** Allowed flush values; see deflate() and inflate() below for details. This constant will be removed, use Z_SYNC_FLUSH instead*/

#define Z_PARTIAL_FLUSH 1

/** Allowed flush values; see deflate() and inflate() below for details */

#define Z_SYNC_FLUSH    2

/** Allowed flush values; see deflate() and inflate() below for details */

#define Z_FULL_FLUSH    3

/** Allowed flush values; see deflate() and inflate() below for details */

#define Z_FINISH        4

/** Allowed flush values; see deflate() and inflate() below for details */

#define Z_BLOCK         5

/** Return codes for the compression/decompression functions. Negative

values are errors, positive values are used for special but normal events. */

#define Z_OK            0

/** Return codes for the compression/decompression functions. Negative

values are errors, positive values are used for special but normal events. */

#define Z_STREAM_END    1

/** Return codes for the compression/decompression functions. Negative

values are errors, positive values are used for special but normal events. */

#define Z_NEED_DICT     2

/** Return codes for the compression/decompression functions. Negative

values are errors, positive values are used for special but normal events. */

#define Z_ERRNO        (-1)

/** Return codes for the compression/decompression functions. Negative

values are errors, positive values are used for special but normal events. */

#define Z_STREAM_ERROR (-2)

/** Return codes for the compression/decompression functions. Negative

values are errors, positive values are used for special but normal events. */

#define Z_DATA_ERROR   (-3)

/** Return codes for the compression/decompression functions. Negative

values are errors, positive values are used for special but normal events. */

#define Z_MEM_ERROR    (-4)

/** Return codes for the compression/decompression functions. Negative

values are errors, positive values are used for special but normal events. */

#define Z_BUF_ERROR    (-5)

/** Return codes for the compression/decompression functions. Negative

values are errors, positive values are used for special but normal events. */

#define Z_VERSION_ERROR (-6)

/** Compression level as no compression */

#define Z_NO_COMPRESSION         0

/** Compression level for best speed */

#define Z_BEST_SPEED             1

/** Compression level for best compression */

#define Z_BEST_COMPRESSION       9

/** Compression level for default compression */

#define Z_DEFAULT_COMPRESSION  (-1)

/** Compression strategy; see deflateInit2() below for details */

#define Z_FILTERED            1

/** Compression strategy; see deflateInit2() below for details */

#define Z_HUFFMAN_ONLY        2

/** Compression strategy; see deflateInit2() below for details */

#define Z_RLE                 3

/** Compression strategy; see deflateInit2() below for details */

#define Z_FIXED               4

/** Compression strategy; see deflateInit2() below for details */

#define Z_DEFAULT_STRATEGY    0

/** Possible values of the data_type field (though see inflate()) */

#define Z_BINARY   0

/** Possible values of the data_type field (though see inflate()) */

#define Z_TEXT     1

/** Possible values of the data_type field (though see inflate()). It is used for compatibility with 1.2.2 and earlier */

#define Z_ASCII    Z_TEXT   

/** Possible values of the data_type field (though see inflate()) */

#define Z_UNKNOWN  2

/** The deflate compression method (the only one supported in this version) */

#define Z_DEFLATED   8

/** For initializing zalloc, zfree, opaque */

#define Z_NULL  0  

/** For compatibility with versions < 1.0.2 */

#define zlib_version zlibVersion()

                        /* basic functions */

/** The application can compare zlibVersion and ZLIB_VERSION for consistency.

   If the first character differs, the library code actually used is

   not compatible with the zlib.h header file used by the application.

   This check is automatically made by deflateInit and inflateInit.

   @return returns zlib version 

 */

ZEXTERN const char * ZEXPORT zlibVersion OF((void));

/*

ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));

     Initializes the internal stream state for compression. The fields

   zalloc, zfree and opaque must be initialized before by the caller.

   If zalloc and zfree are set to Z_NULL, deflateInit updates them to

   use default allocation functions.

     The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:

   1 gives best speed, 9 gives best compression, 0 gives no compression at

   all (the input data is simply copied a block at a time).

   Z_DEFAULT_COMPRESSION requests a default compromise between speed and

   compression (currently equivalent to level 6).

     deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not

   enough memory, Z_STREAM_ERROR if level is not a valid compression level,

   Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible

   with the version assumed by the caller (ZLIB_VERSION).

   msg is set to null if there is no error message.  deflateInit does not

   perform any compression: this will be done by deflate().

*/

/**

    deflate compresses as much data as possible, and stops when the input

  buffer becomes empty or the output buffer becomes full. It may introduce some

  output latency (reading input without producing any output) except when

  forced to flush.

    The detailed semantics are as follows. deflate performs one or both of the

  following actions:

  - Compress more input starting at next_in and update next_in and avail_in

    accordingly. If not all input can be processed (because there is not

    enough room in the output buffer), next_in and avail_in are updated and

    processing will resume at this point for the next call of deflate().

  - Provide more output starting at next_out and update next_out and avail_out

    accordingly. This action is forced if the parameter flush is non zero.

    Forcing flush frequently degrades the compression ratio, so this parameter

    should be set only when necessary (in interactive applications).

    Some output may be provided even if flush is not set.

  Before the call of deflate(), the application should ensure that at least

  one of the actions is possible, by providing more input and/or consuming

  more output, and updating avail_in or avail_out accordingly; avail_out

  should never be zero before the call. The application can consume the

  compressed output when it wants, for example when the output buffer is full

  (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK

  and with zero avail_out, it must be called again after making room in the

  output buffer because there might be more output pending.

    Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to

  decide how much data to accumualte before producing output, in order to

  maximize compression.

    If the parameter flush is set to Z_SYNC_FLUSH, all pending output is

  flushed to the output buffer and the output is aligned on a byte boundary, so

  that the decompressor can get all input data available so far. (In particular

  avail_in is zero after the call if enough output space has been provided

  before the call.)  Flushing may degrade compression for some compression

  algorithms and so it should be used only when necessary.

    If flush is set to Z_FULL_FLUSH, all output is flushed as with

  Z_SYNC_FLUSH, and the compression state is reset so that decompression can

  restart from this point if previous compressed data has been damaged or if

  random access is desired. Using Z_FULL_FLUSH too often can seriously degrade

  compression.

    If deflate returns with avail_out == 0, this function must be called again

  with the same value of the flush parameter and more output space (updated

  avail_out), until the flush is complete (deflate returns with non-zero

  avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that

  avail_out is greater than six to avoid repeated flush markers due to

  avail_out == 0 on return.

    If the parameter flush is set to Z_FINISH, pending input is processed,

  pending output is flushed and deflate returns with Z_STREAM_END if there

  was enough output space; if deflate returns with Z_OK, this function must be

  called again with Z_FINISH and more output space (updated avail_out) but no

  more input data, until it returns with Z_STREAM_END or an error. After

  deflate has returned Z_STREAM_END, the only possible operations on the

  stream are deflateReset or deflateEnd.

    Z_FINISH can be used immediately after deflateInit if all the compression

  is to be done in a single step. In this case, avail_out must be at least

  the value returned by deflateBound (see below). If deflate does not return

  Z_STREAM_END, then it must be called again as described above.

    deflate() sets strm->adler to the adler32 checksum of all input read

  so far (that is, total_in bytes).

    deflate() may update strm->data_type if it can make a good guess about

  the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered

  binary. This field is only for information purposes and does not affect

  the compression algorithm in any manner.

    deflate() returns Z_OK if some progress has been made (more input

  processed or more output produced), Z_STREAM_END if all input has been

  consumed and all output has been produced (only when flush is set to

  Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example

  if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible

  (for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not

  fatal, and deflate() can be called again with more input and more output

  space to continue compressing.

  @param strm Stream of data

  @param flush Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to

  decide how much data to accumualte before producing output, in order to

  maximize compression. Refer to the description above for more details.

  @return deflate returns Z_OK on success. Refer to the description above for more details.

*/

ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));

/**

     All dynamically allocated data structures for this stream are freed.

   This function discards any unprocessed input and does not flush any

   pending output.

     deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the

   stream state was inconsistent, Z_DATA_ERROR if the stream was freed

   prematurely (some input or output was discarded). In the error case,

   msg may be set but then points to a static string (which must not be

   deallocated).

   @param strm Stream of data

   @return deflateEnd returns Z_OK on success. Refer to the description above for more details.

*/

ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));

/*

ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));

     Initializes the internal stream state for decompression. The fields

   next_in, avail_in, zalloc, zfree and opaque must be initialized before by

   the caller. If next_in is not Z_NULL and avail_in is large enough (the exact

   value depends on the compression method), inflateInit determines the

   compression method from the zlib header and allocates all data structures

   accordingly; otherwise the allocation will be deferred to the first call of

   inflate.  If zalloc and zfree are set to Z_NULL, inflateInit updates them to

   use default allocation functions.

     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough

   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the

   version assumed by the caller.  msg is set to null if there is no error

   message. inflateInit does not perform any decompression apart from reading

   the zlib header if present: this will be done by inflate().  (So next_in and

   avail_in may be modified, but next_out and avail_out are unchanged.)

*/

/**

    inflate decompresses as much data as possible, and stops when the input

  buffer becomes empty or the output buffer becomes full. It may introduce

  some output latency (reading input without producing any output) except when

  forced to flush.

  The detailed semantics are as follows. inflate performs one or both of the

  following actions:

  - Decompress more input starting at next_in and update next_in and avail_in

    accordingly. If not all input can be processed (because there is not

    enough room in the output buffer), next_in is updated and processing

    will resume at this point for the next call of inflate().

  - Provide more output starting at next_out and update next_out and avail_out

    accordingly.  inflate() provides as much output as possible, until there

    is no more input data or no more space in the output buffer (see below

    about the flush parameter).

  Before the call of inflate(), the application should ensure that at least

  one of the actions is possible, by providing more input and/or consuming

  more output, and updating the next_* and avail_* values accordingly.

  The application can consume the uncompressed output when it wants, for

  example when the output buffer is full (avail_out == 0), or after each

  call of inflate(). If inflate returns Z_OK and with zero avail_out, it

  must be called again after making room in the output buffer because there

  might be more output pending.

    The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH,

  Z_FINISH, or Z_BLOCK. Z_SYNC_FLUSH requests that inflate() flush as much

  output as possible to the output buffer. Z_BLOCK requests that inflate() stop

  if and when it gets to the next deflate block boundary. When decoding the

  zlib or gzip format, this will cause inflate() to return immediately after

  the header and before the first block. When doing a raw inflate, inflate()

  will go ahead and process the first block, and will return when it gets to

  the end of that block, or when it runs out of data.

    The Z_BLOCK option assists in appending to or combining deflate streams.

  Also to assist in this, on return inflate() will set strm->data_type to the

  number of unused bits in the last byte taken from strm->next_in, plus 64

  if inflate() is currently decoding the last block in the deflate stream,

  plus 128 if inflate() returned immediately after decoding an end-of-block

  code or decoding the complete header up to just before the first byte of the

  deflate stream. The end-of-block will not be indicated until all of the

  uncompressed data from that block has been written to strm->next_out.  The

  number of unused bits may in general be greater than seven, except when

  bit 7 of data_type is set, in which case the number of unused bits will be

  less than eight.

    inflate() should normally be called until it returns Z_STREAM_END or an

  error. However if all decompression is to be performed in a single step

  (a single call of inflate), the parameter flush should be set to

  Z_FINISH. In this case all pending input is processed and all pending

  output is flushed; avail_out must be large enough to hold all the

  uncompressed data. (The size of the uncompressed data may have been saved

  by the compressor for this purpose.) The next operation on this stream must

  be inflateEnd to deallocate the decompression state. The use of Z_FINISH

  is never required, but can be used to inform inflate that a faster approach

  may be used for the single inflate() call.

     In this implementation, inflate() always flushes as much output as

  possible to the output buffer, and always uses the faster approach on the

  first call. So the only effect of the flush parameter in this implementation

  is on the return value of inflate(), as noted below, or when it returns early

  because Z_BLOCK is used.

     If a preset dictionary is needed after this call (see inflateSetDictionary

  below), inflate sets strm->adler to the adler32 checksum of the dictionary

  chosen by the compressor and returns Z_NEED_DICT; otherwise it sets

  strm->adler to the adler32 checksum of all output produced so far (that is,

  total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described

  below. At the end of the stream, inflate() checks that its computed adler32