//

// Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of the License "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description: 

//

// Prepare a clone of TAuthSvr to possess authserver's SID.

// This is required for modifying the authserver's central repository file.

// This clone must be deleted at the end of the test.

RUN_PROGRAM 100 SETCAP tAuthSvr.exe 188b0 -SID 102740FC tAuthSvr_new.exe

// Prepare a clone of TAuthSvr without ReadUserData capability.

// This clone must be deleted at the end of the test.

RUN_PROGRAM 100 SETCAP tAuthSvr.exe 108b0 tAuthSvr1.exe

LOAD_SUITE tAuthSvr

LOAD_SUITE tAuthSvr_new

LOAD_SUITE tAuthSvr1

// This test must be executed in order to set the default plugin, else authserver will never start.

RUN_UTILS DeleteFile C:\pinplugin_inactive.txt

RUN_TEST_STEP_RESULT 0 100	tAuthSvr_new 	INIT_CENREP c:\tauth\tAuthSvr\scripts\tauthsvr2.ini defaultplugin

RUN_UTILS DeleteFile  C:\t_pinplugindlg_in.dat

RUN_UTILS DeleteFile  C:\t_pinplugindlg_out.dat

////

//! @SYMTestCaseID SEC-AUT-CLIENTSIDSUPPORT-0001

//! @SYMTestCaseDesc 		When a client Sid is non-zero, the same must be used to generate the protection key 

//!				of an identity.

//! @SYMREQ 			REQ11236

//! @SYMTestPriority 		Medium

//! @SYMTestActions  		Have a default plugin defined, which is active, and a second one which is active as well

//!				use a client that has ReadUserData capability to connect to the AuthServer.

//! 

//!				Successfully register a 2nd identity while using a specified PIN input

//!				Authenticate using the same PIN input so that the identity to be trained is one

//!				that has been previously trained.Store the Identity obtained as a result of authentication.

//! 

//!				Then call the Train() function, giving a different input. Attempt to authenticate,

//!				giving the new input.Store the identity obtained as a result of authentication.

//!			

//!				Generate a protection key using the key of the identity resulting from the first 

//!				authentication with the client sid and compare with the identity key obtained from 

//!				second authentication.

//!				

//! @SYMTestExpectedResults 	The authentication, registration and retrain are successful. Protection key generated 

//!				by the identity resulting from first authentication must be the same as the protection key 

//!				of the identity resulting from second authentication.

//! @SYMDevelopedForRelease 	Diran

//!

START_TESTCASE SEC-AUT-CLIENTSIDSUPPORT-0001

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REMOVE_DBS

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REG_IDENTITY	c:\tauth\tAuthSvr\scripts\tclientsidsupport.ini Test0001

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	CLIENT_SID_CHECK	c:\tauth\tAuthSvr\scripts\tclientsidsupport.ini Test0002

END_TESTCASE SEC-AUT-CLIENTSIDSUPPORT-0001

////

//! @SYMTestCaseID SEC-AUT-CLIENTSIDSUPPORT-0002

//! @SYMTestCaseDesc 		When a client Sid is zero, the calling application's sid must be used to generate the 

//!				protection key of an identity.

//! @SYMREQ 			REQ11236

//! @SYMTestPriority 		Medium

//! @SYMTestActions  		Have a default plugin defined, which is active, and a second one which is active as well

//!				use a client that has ReadUserData capability to connect to the AuthServer.

//! 

//!				Successfully register a 2nd identity while using a specified PIN input

//!				Authenticate using the same PIN input so that the identity to be trained is one

//!				that has been previously trained.Store the Identity obtained as a result of authentication.

//! 

//!				Then call the Train() function, giving a different input. Attempt to authenticate,

//!				giving the new input.Store the identity obtained as a result of authentication.

//!			

//!				Generate a protection key using the key of the identity resulting from the first 

//!				authentication with the client sid of the calling application and compare with the 

//!				identity key obtained from second authentication.

//!				

//! @SYMTestExpectedResults 	The authentication, registration and retrain are successful. Protection key generated 

//!				by the identity resulting from first authentication must be the same as the protection key 

//!				of the identity resulting from second authentication.

//! @SYMDevelopedForRelease 	Diran

//!

START_TESTCASE SEC-AUT-CLIENTSIDSUPPORT-0002

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REMOVE_DBS

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REG_IDENTITY	c:\tauth\tAuthSvr\scripts\tclientsidsupport.ini Test0001

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	CLIENT_SID_CHECK	c:\tauth\tAuthSvr\scripts\tclientsidsupport.ini Test0003

END_TESTCASE SEC-AUT-CLIENTSIDSUPPORT-0002

////

//! @SYMTestCaseID SEC-AUT-CLIENTSIDSUPPORT-0003

//! @SYMTestCaseDesc 		When a client sid is non-zero and is not the same as the calling application's SID, 

//!				a call to authenticate method fails if the calling application doesn't 

//!				possess ReadUserData capability. 

//! @SYMREQ 			REQ11236

//! @SYMTestPriority 		Medium

//! @SYMTestActions  		Have a default plugin defined, which is active, and a second one which is active as well

//!				use a client that does not have ReadUserData capability to connect to the AuthServer.

//! 

//!				Successfully register a 2nd identity while using a specified PIN input

//!				Authenticate using the same PIN input so that the identity to be trained is one

//!				that has been previously trained.Authentication fails with KErrPermissionDenied,

//!				since the calling appliction doesn't possess ReadUserData capability.

//!				Authentication must fail with KErrPermissionDenied.

//! @SYMDevelopedForRelease 	Diran

//!

START_TESTCASE SEC-AUT-CLIENTSIDSUPPORT-0003

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REMOVE_DBS

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REG_IDENTITY	c:\tauth\tAuthSvr\scripts\tclientsidsupport.ini Test0001

RUN_TEST_STEP !Error=-46 100	tAuthSvr1 	CLIENT_SID_CHECK	c:\tauth\tAuthSvr\scripts\tclientsidsupport.ini Test0002

END_TESTCASE SEC-AUT-CLIENTSIDSUPPORT-0003

////

//! @SYMTestCaseID SEC-AUT-CLIENTSIDSUPPORT-0004

//! @SYMTestCaseDesc 		When a client sid is zero, a call to authenticate method succeeds even if the calling 

//!				application doesn't have ReadUserData capability.

//! @SYMREQ 			REQ11236

//! @SYMTestPriority 		Medium

//! @SYMTestActions  		Have a default plugin defined, which is active, and a second one which is active as well

//!				use a client that doesn't possess ReadUserData capability to connect to the AuthServer.

//! 

//!				Successfully register a 2nd identity while using a specified PIN input

//!				Authenticate using the same PIN input so that the identity to be trained is one

//!				that has been previously trained.Store the Identity obtained as a result of authentication.

//! 

//!				Then call the Train() function, giving a different input. Attempt to authenticate,

//!				giving the new input.Store the identity obtained as a result of authentication.

//!			

//!				Generate a protection key using the key of the identity resulting from the first 

//!				authentication with the client sid of the calling application and compare with the 

//!				identity key obtained from second authentication.

//!				

//! @SYMTestExpectedResults 	The authentication, registration and retrain are successful. Protection key generated 

//!				by the identity resulting from first authentication must be the same as the protection key 

//!				of the identity resulting from second authentication.

//! @SYMDevelopedForRelease 	Diran

//!

START_TESTCASE SEC-AUT-CLIENTSIDSUPPORT-0004

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REMOVE_DBS

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REG_IDENTITY	c:\tauth\tAuthSvr\scripts\tclientsidsupport.ini Test0001

RUN_TEST_STEP_RESULT 0 100	tAuthSvr1 	CLIENT_SID_CHECK	c:\tauth\tAuthSvr\scripts\tclientsidsupport.ini Test0003

END_TESTCASE SEC-AUT-CLIENTSIDSUPPORT-0004

////

//! @SYMTestCaseID SEC-AUT-CLIENTSIDSUPPORT-0005

//! @SYMTestCaseDesc 		When a client sid is non-zero and is the same as the calling application's sid,

//!				, a call to authenticate method succeeds even if the calling application doesn't 

//!				have ReadUserData capability.

//! @SYMREQ 			REQ11236

//! @SYMTestPriority 		Medium

//! @SYMTestActions  		Have a default plugin defined, which is active, and a second one which is active as well

//!				use a client that doesn't possess ReadUserData capability to connect to the AuthServer.

//! 

//!				Successfully register a 2nd identity while using a specified PIN input

//!				Authenticate using the same PIN input so that the identity to be trained is one

//!				that has been previously trained.Store the Identity obtained as a result of authentication.

//! 

//!				Then call the Train() function, giving a different input. Attempt to authenticate,

//!				giving the new input.Store the identity obtained as a result of authentication.

//!			

//!				Generate a protection key using the key of the identity resulting from the first 

//!				authentication with the client sid of the calling application and compare with the 

//!				identity key obtained from second authentication.

//!				

//! @SYMTestExpectedResults 	The authentication, registration and retrain are successful. Protection key generated 

//!				by the identity resulting from first authentication must be the same as the protection key 

//!				of the identity resulting from second authentication.

//! @SYMDevelopedForRelease 	Diran

//!

START_TESTCASE SEC-AUT-CLIENTSIDSUPPORT-0005

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REMOVE_DBS

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REG_IDENTITY	c:\tauth\tAuthSvr\scripts\tclientsidsupport.ini Test0001

RUN_TEST_STEP_RESULT 0 100	tAuthSvr1 	CLIENT_SID_CHECK	c:\tauth\tAuthSvr\scripts\tclientsidsupport.ini Test0004

END_TESTCASE SEC-AUT-CLIENTSIDSUPPORT-0005

// This is to shut down the auth server

DELAY 5000