/*

* All rights reserved.

* This component and the accompanying materials are made available

* under the terms of "Eclipse Public License v1.0"

* which accompanies this distribution, and is available

* at the URL "http://www.eclipse.org/legal/epl-v10.html".

*

* Initial Contributors:

* Nokia Corporation - initial contribution.

*

* Contributors:

*

* Description:  Internal CenRep keys

*

*/

/*

*/

#ifndef WLANDEVICESETTINGSINTERNALCRKEYS_H

#define WLANDEVICESETTINGSINTERNALCRKEYS_H

/**

 * Repository Id

 */

const TUid KCRUidWlanDeviceSettingsRegistryId = {0x101f8e44};

/**

 * The beacon interval in milliseconds to be used when creating an IBSS network.

 */

const TUint32 KWlanBeacon =                              0x00000002;

/**

 * The data rate used for sending probe requests. The value is determined by

 * multiplying the data rate by two; 1MB/s = 2, 2MB/s = 4 and so forth.

 */

const TUint32 KWlanScanRate =                            0x00000004;

/**

 * The RCPI threshold after which roaming to a better AP is attempted.

 */

const TUint32 KWlanRcpiTrigger =                         0x00000005;

/**

 * The minimum channel time for active scan in milliseconds.

 */

const TUint32 KWlanMinActiveChannelTime =                0x00000006;

/**

 * The maximum channel time for active scan in milliseconds.

 */

const TUint32 KWlanMaxActiveChannelTime =                0x00000007;

/**

 * The maximum amount of time allowed to transmit a packet before

 * it is discarded. The value is in milliseconds.

 */

const TUint32 KWlanMaxTxMSDULifeTime =                   0x00000008;

/**

 * Defines how many seconds the cached broadcast scan results are valid.

 */

const TUint32 KWlanScanExpirationTimer =                 0x00000009;

/**

 * The activity timeout value after which the WLAN drivers are unloaded.

 * Note that this setting applies only when the terminal is not connected

 * to a network. The value is in seconds.

 */

const TUint32 KWlanUnloadDriverTimer =                   0x0000000A;

/**

 * Defines how often roaming to better AP is attempted when the threshold

 * set in KWlanRcpiTrigger has been crossed. The value is in microseconds.

 */

const TUint32 KWlanRoamTimer =                           0x0000000B;

/**

 * Defines the how much better an AP has to be than the current AP

 * before roaming is attempted.

 */

const TUint32 KWlanRcpiDifference =                      0x0000000C;

/**

 * The amount of time to wait after a BSS lost indication before

 * attempting to roam. The value is in microseconds.

 */

const TUint32 KWlanConnRegainTimer =                     0x0000000D;

/**

 * The number of attempts to find suitable network during initial connect.

 */

const TUint32 KWlanMaxTriesToFindNw =                    0x0000000E;

/**

* KWlanDelayBetweenFindNw 

* Defines the delay between attempts to find network.

* (microseconds)

*/

const TUint32 KWlanDelayBetweenFindNw =                  0x0000000F;

/**

 * Maximum transfer unit (MTU) size

 */

const TUint32 KWlanMTU =                                 0x00000010;

/**

* KWlanMinPassiveChannelTime

* Minimum channel time for passive scan.

*/

const TUint32 KWlanMinPassiveChannelTime =               0x00000011;

/**

* KWlanMaxPassiveChannelTime

* Maximum channel time for passive scan.

*/

const TUint32 KWlanMaxPassiveChannelTime =               0x00000012;

/**

* KWlanMaxApFailureCount

* Maximum amount of association failures.

*/

const TUint32 KWlanMaxApFailureCount =                   0x00000013;

/**

* KWlanLongBeaconFindCount

* Long beacon interval AP detection.

*/

const TUint32 KWlanLongBeaconFindCount =                 0x00000014;

/**

* KWlanQosNullFrameInterval

* QoS NULL data frame send interval.

*/

const TUint32 KWlanQosNullFrameInterval =                0x00000015;

/**

* KWlanQosNullFrameTimeout

* QoS NULL data frame send timeout.

*/

const TUint32 KWlanQosNullFrameTimeout =                 0x00000016;

/**

 * NULL data frame sending interval when no transmission in microseconds.

 */

const TUint32 KWlanKeepAliveInterval =                   0x00000017;

/**

 * RCPI threshold for direct scan stop in BSS lost.

 */

const TUint32 KWlanScanStopRcpiThreshold =               0x00000018;

/**

 * Minimum RCPI for available IAP.

 */

const TUint32 KWlanMinRcpiForIapAvailability =           0x00000019;

/**

 * Entry timeout for QoS NULL frame sending in microseconds.

 */

const TUint32 KWlanQoSNullFrameEntryTimeout =            0x0000001A;

/**

 * Deauthentications per AP before blacklisting.

 */

const TUint32 KWlanMaxApDeauthenticationCount =          0x0000001B;

/**

 * Deauthentication timeout for calculating AP's deauthentication count

 * (in microseconds).

 */

const TUint32 KWlanApDeauthenticationTimeout =           0x0000001C;

/**

 * Default value in seconds for BackGround Scan Interval

 */

const TUint32 KWlanDefaultBGScanInterval =               0x0000001D;

/**

 * Maximum amount of microseconds to sleep when waking up on DTIMs.

 */

const TUint32 KWlanMaxDtimSkipInterval =                 0x0000001F;

/**

 * Time interval in microseconds after which transition from Active mode 

 * to Light PS mode is considered.

 */

const TUint32 KWlanPsActiveToLightTimeout =              0x00000020;

/**

 * Frame count threshold used when considering transition from Active

 * to Light PS mode.

 */

const TUint32 KWlanPsActiveToLightThreshold =            0x00000021;

/**

 * Time interval in microseconds after which the frame counter used when 

 * considering transition from Light PS to Active mode is reset.

 */

const TUint32 KWlanPsLightToActiveTimeout =              0x00000022;

/**

 * Frame count threshold used when considering transition from Light PS

 * to Active mode.

 */

const TUint32 KWlanPsLightToActiveThreshold =            0x00000023;

/**

 * Time interval in microseconds after which transition from Light PS mode 

 * to Deep PS mode is considered.

 */

const TUint32 KWlanPsLightToDeepTimeout =                0x00000024;

/**

 * Frame count threshold used when considering transition from Light PS

 * to Deep PS mode.

 */

const TUint32 KWlanPsLightToDeepThreshold =              0x00000025;

/**

 * Received frame payload length (in bytes) threshold in U-APSD network for

 * Best Effort Access Category.

 */

const TUint32 KWlanPsUapsdRxFrameLengthThreshold =       0x00000026;

/**

 * The minimum delay between RCPI roam checks (in microseconds).

 */

const TUint32 KWlanRcpiRoamMinInterval =                 0x00000027;

/**

 * The maximum delay between RCPI roam checks (in microseconds).

 */

const TUint32 KWlanRcpiRoamMaxInterval =                 0x00000028;

/**

 * Defines how many times an RCPI roam check interval value is used

 * until the next interval value is calculated.

 */

const TUint32 KWlanRcpiRoamAttemptsPerInterval =         0x00000029;

/**

 * The factor the current interval value is multiplied by to

 * get the next interval value.

 */

const TUint32 KWlanRcpiRoamNextIntervalFactor =          0x0000002A;

/**

 * The value that is added to the interval value that has been

 * multiplied by KWlanRcpiRoamNextIntervalFactor.

 */

const TUint32 KWlanRcpiRoamNextIntervalAddition =        0x0000002B;

/**

 * Defines how long beacons/probe responses are stored in

 * the internal scan list (in microseconds).

 */

const TUint32 KWlanScanListExpirationTime =              0x0000002C;

/**

 * Defines how many Voice AC packets must be sent during a certain period

 * before QoS NULL data frame sending is started.

 */

const TUint32 KWlanQoSNullFrameEntryTxCount =            0x0000002D;

/**

 * The signal predictor algorithm target RCPI value for roam indication.

 */

const TUint32 KWlanSpRcpiTarget =                        0x0000002E;

/**

 * The signal predictor algorithm target time for roam indication (in microseconds).

 */

const TUint32 KWlanSpTimeTarget =                        0x0000002F;

/**

 * The minimum time interval for consecutive roam indications

 * from the signal predictor algorithm (in microseconds).

 */ 

const TUint32 KWlanSpMinIndicationInterval =             0x00000030;

/**

 * The minimum delay between BSS lost roam attempts (in microseconds).

 */

const TUint32 KWlanBssLostRoamMinInterval =              0x00000031;

/**

 * The maximum delay between BSS lost roam attempts (in microseconds).

 */

const TUint32 KWlanBssLostRoamMaxInterval =              0x00000032;

/**

 * Defines how many times a BSS lost roam interval value is used

 * until the next interval value is calculated.

 */

const TUint32 KWlanBssLostRoamAttemptsPerInterval =      0x00000033;

/**

 * The factor the current interval value is multiplied by to

 * get the next interval value.

 */

const TUint32 KWlanBssLostRoamNextIntervalFactor =       0x00000034;

/**

 * The value that is added to the interval value that has been

 * multiplied by KWlanBssLostRoamNextIntervalFactor.

 */

const TUint32 KWlanBssLostRoamNextIntervalAddition =     0x00000035;

/**

 * Defines how many attempts are made to find a suitable AP before

 * giving up during BSS lost.

 */

const TUint32 KWlanBssLostRoamMaxTriesToFindNw =         0x00000036;

/**

 * Defines how many microseconds to wait for traffic stream request response.

 */

const TUint32 KWlanTrafficStreamCreationTimeout =        0x00000037;

/**

 * The number of lost consecutive beacons after which beacon lost event

 * is indicated.

 */

const TUint32 KWlanBeaconLostThreshold =                 0x00000038;

/**

 * The number of lost consecutive beacons after which beacon lost event

 * is indicated during an active Bluetooth connection.

 */

const TUint32 KWlanBtBeaconLostThreshold =               0x00000039;

/**

 * The number of lost consecutive packets after which TX failure event

 * is indicated.

 */

const TUint32 KWlanTxFailThreshold =                     0x0000003A;

/**

 * The number of lost consecutive packets after which TX failure event

 * is indicated during an active Bluetooth connection.

 */

const TUint32 KWlanBtTxFailThreshold =                   0x0000003B;

/**

 * The number of seconds after which power save is enabled during

 * the initial association.

 */

const TUint32 KWlanPowerSaveDelay =                      0x0000003C;

/**

 * The amount of seconds region information is valid.

 */

const TUint32 KWlanRegionExpirationTime =                0x0000003D;

/**

 * Minimum interval for accepting subsequent RRM Beacon Requests

 * (in microseconds).

 */

const TUint32 KWlanRrmMinMeasurementInterval =           0x0000003E;

/**

 * Current PSM server mode where possible values are:

 * 0 = Normal mode

 * 1 = Power save

 * 2 = Partial power save

 */

const TUint32 KWlanPsmSrvMode =                          0x0000003F;

/**

 * Peak start time for WLAN background scan specifying hours and minutes.

 * Valid range is 0 to 2359 meaning 00:00 o'clock to 23:59 o'clock.

 */

const TUint32 KWlanBgScanPeakPeriodStart =               0x00000040;

/**

 * Peak end time for WLAN background scan specifying hours and minutes.

 * Valid range is 0 to 2359 meaning 00:00 o'clock to 23:59 o'clock.

 */

const TUint32 KWlanBgScanPeakPeriodEnd =                 0x00000041;

/**

 * WLAN background scan interval in seconds for peak period.

 */

const TUint32 KWlanBgScanIntervalPeakPeriod =            0x00000042;

/**

 * WLAN background scan interval in seconds for off-peak period.

 */

const TUint32 KWlanBgScanIntervalOffPeakPeriod =         0x00000043;

/**

 * Whether admission control traffic stream management is done automatically.

 */

const TUint32 KWlanAutomaticTrafficStreamMgmt =          0x00000044;

/**

 * The minimum channel time for active broadcast scan in milliseconds.

 */

const TUint32 KWlanMinActiveBroadcastChannelTime =       0x00000045;

/**

 * The maximum channel time for active broadcast scan in milliseconds.

 */

const TUint32 KWlanMaxActiveBroadcastChannelTime =       0x00000046;

/**

 * Bitmask of enabled WLAN features.

 */

const TUint32 KWlanEnabledFeatures =                     0x00000047;

/**

 * Cached WLAN region where possible values are: 

 * 0 = Region is unknown 

 * 1 = Region is ETSI 

 * 2 = Region is FCC.

 */

const TUint32 KWlanRegion =                              0x00000050;

/**

 * Timestamp for cached WLAN region (minutes from 0AD nominal Gregorian).

 */

#endif      // WLANDEVICESETTINGSINTERNALCRKEYS_H