--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/trace/traceviewer/com.nokia.traceviewer.help/html/tasks/traceactivation.htm Wed Jun 23 14:49:59 2010 +0300
@@ -0,0 +1,52 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
+<html>
+<head>
+<title>Activating traces</title>
+<link href="../../book.css" type="text/css" rel="stylesheet"></head>
+<body>
+
+<h2>Activating traces</h2>
+<h5>Before you start</h5>
+<p>Trace activation is a way of generating specific trace data that
+is relevant for your components. This reduces the amount of traces listed
+on the TraceViewer user interface. For more information, see <a href="../concepts/decode_file.htm">
+Dictionary file and trace activation</a>.</p>
+<p>Before you can activate trace components and groups, open the Dictionary file
+(.xml) that contains the necessary component and group information.
+See <a href="decoding_traces.htm">Decoding binary traces with a Dictionary file</a>.</p>
+<p>To activate traces: </p>
+<ol>
+<li>From the TraceViewer menu, select <b>Trace Activation</b>. <p>
+The <b>Trace activation</b> dialog is displayed, showing the components and
+groups loaded from the Dictionary file. </p></li>
+<li><a name="act_conf"></a>(Optional) Activation configurations can be saved
+and loaded from an XML file.
+To load a saved activation configuration file:
+<ol>
+<li>Select <b>Load Configuration...</b> </li>
+<li>Select the correct configuration from the list. </li>
+<li>Click <b>OK</b>. </li>
+</ol>
+<p><img src="images\traceactivationConf.png"></p><p><b>Tip:</b> To save
+a configuration after making changes to it, click <b>Save Current...</b>.
+Then select a file, type the configuration name and click <b>OK</b>. One file
+can contain several configurations. </p></li>
+<li>To activate components and groups, do any of the following:
+<ul>
+<li>Select one or more components or groups from the list, right-click and
+select <b>Activate</b>. </li>
+<li>Select one or more components from the list, and double-click groups to
+change the activation state or click <b>Activate</b>. </li>
+<li>In the <b>Filter</b> field, type in the component or group name (or an
+asterisk for a wildcard), right-click and select <b>Activate</b>.</li>
+</ul>
+<p>See the following example:</p>
+<p><img src="images/traceactivationDialog.png" alt="Trace Activation Dialog"></p></li>
+<li>If the connection to a trace source is established, click <b>Send Activation
+</b> to send the activation message. </li>
+</ol>
+<p>The trace groups you selected are activated and traces are received from the device.</p>
+
+<div id="footer">Copyright © 2007-2010 Nokia Corporation and/or its subsidiary(-ies). All rights reserved.</div>
+</body>
+</html>
\ No newline at end of file