<?xml version="1.0" encoding="utf-8"?>

<!-- Copyright (c) 2007-2010 Nokia Corporation and/or its subsidiary(-ies) All rights reserved. -->

<!-- This component and the accompanying materials are made available under the terms of the License 

"Eclipse Public License v1.0" which accompanies this distribution, 

and is available at the URL "http://www.eclipse.org/legal/epl-v10.html". -->

<!-- Initial Contributors:

    Nokia Corporation - initial contribution.

Contributors: 

-->

<!DOCTYPE concept

  PUBLIC "-//OASIS//DTD DITA Concept//EN" "concept.dtd">

<concept id="GUID-A3B58436-07E4-565B-800B-86435D205461" xml:lang="en"><title>Certificate

Validation in PKIX</title><prolog><metadata><keywords/></metadata></prolog><conbody>

<p>Certificates of different types are trusted by different applications.

Therefore certificates need to be signed by certification authority (CA) and

the signature must be verified and validated. This section describes about

certificate chain and certificate validation processes. </p>

<section><title>Certificate Chain</title> <p>Certificate validation is a recursive

process. It begins with the need to verify the signature on some data presented

by an End Entity (EE). This involves checking that the key pair is actually

owned by that EE. To do this the public signing key of that EE is acquired

by getting its certificate. That certificate would have been signed by the

EE's certification authority (CA), so the signature on the certificate can

be verified by getting the CA's public signing key. In turn the CA's certificate

might require verifying in which case the process is repeated until the process

bottoms out when an entity which is already trusted is reached; that entity

is usually self signed. This process is illustrated in the figure below: </p> <fig id="GUID-A0956B2A-B12F-58E1-9172-C1EDBBE593CE">

<title>              Certificate chain            </title>

<image href="GUID-EA5E9A07-587C-5E64-A157-1077AD9E56ED_d0e617303_href.png" placement="inline"/>

</fig> <p>The set of certificates from an EE up to a trusted root CA certificate

is called a <keyword>certificate chain</keyword>. Once a certificate chain

has been constructed ,the EE's key pair at the start can be validated. </p> </section>

<section><title> Input to Certificate Validation</title> <p id="GUID-21CE5C18-856E-57B6-A5B6-3C1104EB8151"><b> End

Entity &amp; Intermediate Certificates</b> </p> <p>A set of certificates,

from the entity requesting authentication up to, but not including, one already

trusted by the relying party. </p> <p>Where these certificates come from is

potentially a difficult problem if certificate management is expected to search

for intermediate certificates in remote repositories; however for TLS at least

servers are required to supply a complete, ordered set of certificates in

the form of DER-encoded ASN.1; so client code can just pass this into the

certificate chain object. </p> <p id="GUID-2533ACD8-29FC-5297-A462-7D93BF029A59"><b> Trusted

Root Certificates</b> </p> <p>Authentication cannot be done entirely by software:

there must be a point at which the user confirms that they trust a particular

entity. The validation algorithm can only ascertain that if the user trusts

certificate X then they may also trust certificate Y. Certificates which the

user trusts directly are called root certificates because they are the root

of the validation chain. They are usually self-signed. </p> <p>It is likely

that different applications will have different requirements about which certificates

may be considered trust roots and for the level of protection they require

for trust roots. To this end, applications will pass in a unique ID (<codeph>TUid</codeph>)

which Certificate and Key Management will use to identify the application,

and so work out which certificates can be considered trusted for that application. </p> <p>For

additional flexibility, an overload is provided enabling clients to pass a

set of root certificates directly into the validation function. </p> <p>For

more detailed discussion of the storage and management of root certificates

see <xref href="GUID-2800C486-2FB4-5C5C-990F-CC1A290F7E0C.dita">Root Certificate

Management, Storage, and Client registration</xref>. </p> <p id="GUID-0E4B09EF-74B8-5272-98F4-60C423614F50"><b> Validation

Time</b> </p> <p>The time for which validation will be performed. </p> <p id="GUID-288B55BA-E0B0-5F67-BD62-A08832A09889"><b> Acceptable Policies</b> </p> <p>A

set of OIDs, each of which represents a certification policy acceptable to

the application. This enables client code to restrict the certificates that

may occur in a valid certificate chain. Client code does not have to specify

any preferred policies here. An empty set is interpreted as any policy. </p> </section>

<section id="GUID-AE46492C-5F13-5B73-B1F5-81DD6C15AFAF"><title>Configuring

for Certificate Validation</title> <p>The following settings can be configured

for the validation process: </p> <table id="GUID-D88105DD-347A-5E33-8B79-1A75CCC28ED0">

<tgroup cols="2"><colspec colname="col0"/><colspec colname="col1"/>

<tbody>

<row>

<entry><p>Supported critical extensions </p> </entry>

<entry><p>You can list supported X.509 v3 critical extensions. Once you have

set a list, you have full control over the processing of X.509 v3 critical

extensions. If a critical extension is found whose OID matches an element

in this list, certificate validation treats this as a warning instead of an

error. </p> <p>You can set, add, remove and reset the list of supported critical

extensions. </p> <p>If critical extensions are not configured, the validation

process uses a default set. This includes standard X.509 critical extensions

and Symbian specific critical extensions. </p> </entry>

</row>

<row>

<entry><p>Date validity checks </p> </entry>

<entry><p>You can specify whether a failed check on the certificate validity

date is treated as an error or a warning. You can use this to verify the certificate

validity period post-installation. By default the certificate validity period

only needs to be checked at installation. </p> </entry>

</row>

</tbody>

</tgroup>

</table> </section>

<section><title> Chain Validation</title> <p><b> Chain Construction</b> </p> <p>The

chain object parses the encoded set of certificates. The first certificate

is considered to be the EE certificate, and subsequent certificates must each

certify the preceding one. The chain object then searches the set of trusted

root certificates for a certificate trusted by the client and whose subject

name matches the issuer name in the last certificate in the decoded set. If

two or more match, it will attempt to resolve this be comparing the authority

key ID in the last certificate with the subject key ID in each candidate root.

If this extension is not present, it will attempt to find a single root by

signature verification. If no root is found validation will fail immediately

with an error. </p> <p><b> Initialisation of Chain Validation Algorithm</b> </p> <p>The

certificate chain initialises the following state variables: </p> <ul>

<li id="GUID-00BFA3CA-ECE2-5D69-B90F-B1B01D40006D"><p>Validation Time: time

for which validation is calculated. Initialised to the time supplied by client

code. </p> </li>

<li id="GUID-266D360B-2793-5963-B2B2-D79E9745AF4D"><p>Initial Policies: set

of policy OIDs, initialised to the policies supplied by client code </p> </li>

<li id="GUID-4DEBA756-99FA-54CB-9E93-85F8F54301B7"><p>Acceptable Policies:

set of X.509 policy information objects, initially any policy </p> </li>

<li id="GUID-B7FD8FF3-61E1-5CAB-8B6E-25092186727E"><p>Mapped Policies: set

of policy OIDs, initially empty </p> </li>

<li id="GUID-280A775A-4F34-5A1B-9A9A-BAFFE7A4E77B"><p>Excluded Subtrees: set

of X.500 General Name objects, initially empty </p> </li>

<li id="GUID-C4059DDE-16AC-5B3F-8001-09DC1FF789A8"><p>Permitted Subtrees:

set of X.500 General Name objects, initially any subtree </p> </li>

<li id="GUID-A27F8096-0F6B-5942-9019-3D7685AE3E10"><p>Max Path Length: integer

representing the maximum path length. Initially the actual path length </p> </li>

<li id="GUID-89B057B9-E26E-594C-B23F-E73FA97E07C8"><p>Inhibit Policy Mapping:

integer whose value is the number of certificates that may appear after the

current one before policy mapping is no longer permitted. Initially the chain

length </p> </li>

<li id="GUID-3D92E10D-2BF5-5DD3-B061-9CB332631880"><p>Require Explicit Policy:

integer whose value is the number of certificates that may appear after the

current one before an acceptable policy OID must appear in the certificate.

Initially the chain length </p> </li>

<li id="GUID-1CEA8529-2141-5083-9279-F464B217BDE1"><p>Current Cert: integer

whose value is the position of the current certificate in the chain. Initially

the chain length -1 </p> </li>

</ul> <p><b> Validation Algorithm</b> </p> <p>Validation of a certificate

chain starts at the root and ends at the End Entity. </p> <p><i>Validation

warnings </i></p> <p>Validation returns warnings. Warnings enable client code

to evaluate whether irregularities are errors. </p> <p>From Version 9.3, validation

returns a warning object for every certificate in the chain. Each warning

object has the following characteristics: </p> <ul>

<li id="GUID-4C016BA3-99EF-5D7C-9EDC-AC958C9AA937"><p>It includes the object's

index. Clients use the index to get the certificate from the certificate chain

object (<xref href="GUID-A919BE84-8257-3911-9AD1-B1DB736346CE.dita#GUID-A919BE84-8257-3911-9AD1-B1DB736346CE/GUID-9A843DCB-54C7-3BF4-BF30-2515969079A9"><apiname>CX509CertChain::Cert()</apiname></xref>). </p> </li>

<li id="GUID-81C9B8B1-F8B4-50E8-B7DC-53C131B646B9"><p>It encapsulates the

warnings and the critical extensions' OID values for that certificate. </p> <p> </p> </li>

</ul> <p>Clients can query the object for two sets of data: </p> <ul>

<li id="GUID-A7E6D671-1966-5DA7-821C-C7AD3880D7F1"><p>the critical extensions

for the certificate </p> </li>

<li id="GUID-5FCA36E5-CEDB-567C-8E95-759C13A64362"><p>a set of warning values,

each consisting of a reason for the warning and an integer identifying the

certificate that the warning is associated with. </p> </li>

</ul> <p>After querying the warning object for the critical extension, the

client must process any custom critical extensions it supplied that are not

in the supported list. This meets the X.509 certificate specification. </p><note> Prior

to version 9.3, the set of warning values returned included any warnings about

critical extensions. Warning values no longer include this information. But

backward compatibility has been maintained for warning objects prior to version

9.3. </note> <p><i>Certificate validation step</i>s </p> <p>Certificate

validation takes place through the following steps: </p> <ul>

<li id="GUID-70351BB4-CE56-559E-81A2-1EE0DBA19AFD"><p>Signature Verification

&amp; Name Chaining </p> <p>Each certificate must be signed by, and its subject

name should match the issuer name in, the certificate above it in the chain.

The only exception is the root certificate, which, if it claims to be self

signed (i.e. its subject and issuer names match) must really be self signed;

otherwise its signature is not verified, but a warning is generated. </p> </li>

<li id="GUID-9597F61C-7ECE-5754-85BC-12D50035D7D1"><p>Validity Period Checking </p> <p>For

each certificate, the Validation Time must lie within the validity period

in the certificate. The check is always carried out. The check treats a failure

as an error or a warning depending on how the validation process is configured

(See Date validity checks in <xref href="GUID-A3B58436-07E4-565B-800B-86435D205461.dita#GUID-A3B58436-07E4-565B-800B-86435D205461/GUID-AE46492C-5F13-5B73-B1F5-81DD6C15AFAF">Configuring

for Certificate Validation</xref>). By default the check treats the failure

as an error. </p> </li>

<li id="GUID-1EB6F83B-C10D-5809-B5A8-4AF45FFA9A92"><p>Extension Processing </p> <p>Extensions

can be marked critical. All critical extensions must be in the supported list

to be recognized and processed. When a critical extension that is not in the

supported list is encountered, an error results and validation fails. The

client must process critical extensions that are not in the supported list. </p> </li>

<li id="GUID-463F6C6E-7C3B-514E-A7E8-91D07CFFD102"><p>Revocation Checking </p> </li>

</ul> <p>Additionally, for each certificate: </p> <ul>

<li id="GUID-91579F6C-2C98-50DF-9637-E08EBDEC4CDE"><p>the <i>Max Path Length</i>, <i>Inhibit

Policy Mapping</i> and <i>Require Explicit Policy</i> variables are decremented, </p> </li>

<li id="GUID-05687909-8111-53D0-9760-88FF557C26AA"><p>and Current Cert must

be less than or equal to <i>Max Path Length</i>. </p> </li>

</ul> <p>When validation is complete the <i>Acceptable Policies</i> variable

will be copied into the set of policies in the result object. </p> </section>

<section><title>See also</title> <ul>

<li id="GUID-A6095947-6CFF-50CC-BBAC-181B91CD9132"><p><xref href="GUID-E326C00B-6E07-5902-AB19-F00D1761795C.dita">PKIXCert</xref>  </p> </li>

</ul> </section>