<?xml version="1.0" encoding="utf-8"?>

<!-- Copyright (c) 2007-2010 Nokia Corporation and/or its subsidiary(-ies) All rights reserved. -->

<!-- This component and the accompanying materials are made available under the terms of the License 

"Eclipse Public License v1.0" which accompanies this distribution, 

and is available at the URL "http://www.eclipse.org/legal/epl-v10.html". -->

<!-- Initial Contributors:

    Nokia Corporation - initial contribution.

Contributors: 

-->

<!DOCTYPE task

  PUBLIC "-//OASIS//DTD DITA Task//EN" "task.dtd">

<task id="GUID-CDDC6DBD-560B-4602-815C-FE3FCDA09AD5" xml:lang="en"><title>Running

Tests using TestDriver</title><shortdesc/><prolog><metadata><keywords/></metadata></prolog><taskbody>

enable the Communication between the PC and the device under test. </cmd>

</step>

<step id="GUID-444100DE-25A7-4454-9BD3-89B98E0F5EB6"><cmd/>

<info><p>If you are using ARMv5, the hardware reference board (for example,

H4) must be connected to the PC through USB, serial cable, BT or TCP/IP connection.

TestDriver uses STAT application on the device to communicate with the PC

and the device. For more details, refer to <i>Symbian Verification Suite »

TestDriver » Using TestDriver » Communicating with the device.</i>  </p> <p>The

ROM image is built on the PC and transferred to the hardware board using a

MMC card. </p> </info>

</step>

<step id="GUID-BAF501D8-8E23-4893-A693-7E2C8CFB22DC"><cmd>Configure the TestDriver using the automated scripts located at <filepath>…\syslibsapitest\syslibssvs\group\</filepath></cmd>

<info><p><userinput>testdriversetup </userinput></p><p><filepath>testdriversetup.bat</filepath> calls <filepath>testdriversetup.pl</filepath> which

applies an appropriate set of configuration parameters.</p></info>

</step>

<step id="GUID-9ADB9699-F83F-42CF-9D3B-8199D7D65EDF"><cmd/>

<info><p>Build test code using the following command: </p> <p><userinput>testdriver

build –p <winscw/armv5> –b <urel/udeb> –s syslibs[.ecom[.<test suite

name &gt;]]</userinput> </p> <p> <b>Note:</b> You can execute TestDriver commands

from any location. </p> <p>For the SysLibs testdriver test suite structure,

refer to <i>Building and Execution</i> section. </p></info>

</step>

<step id="GUID-6CB8427A-44BE-4C5A-BEEE-CCA581DCC910"><cmd/>

<info><p>If you are using ARMv5, build the ROM image using the following command: </p> <p><userinput>buildrom

-D_STARTUPMODE2 -D_EABI=ARMV5 -DRVCT -DUSE_STRONG_CRYPTOGRAPHY <h2/h4hrp>

techview_statapi</userinput> </p></info>

</step>

<step id="GUID-EBFFC157-E016-4706-ACBE-C3390EDC9CFB"><cmd>Run the tests.</cmd>

<info><p><b>For ARMv5: </b></p><p>Run the following command:</p><p><userinput>testdriver

run -t &lt;transport service used&gt;</userinput></p><p>Transport service used

can be “serial<COM port number that is connected to the board>”,  “bt<COM

port number for BT dongle&gt;”, or “usb&lt;mapped port number&gt;.”</p><p><b>For

WINSCW</b>:</p><p>Run the following command:</p><p><userinput>testdriver run</userinput> </p></info>

<info><p><b>Note</b>: All scripts and test data are automatically removed

from the system drive of the device under test after the execution.</p></info>

</step>

</steps>

</taskbody></task>