--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/configurationengine/source/plugins/symbian/ConeGenconfmlPlugin/genconfmlplugin/tests/project/assets/s60/confml/commsdatcreator.confml	Thu Mar 11 17:04:37 2010 +0200
@@ -0,0 +1,1893 @@
+<configuration name="Default CommsDat settings" xmlns="http://www.s60.com/xml/confml/2" xmlns:xi="http://www.w3.org/2001/XInclude">
+  <feature name="CommsDat generation" ref="KCRUidCommsDatCreator">
+    <desc>Used to configure whether CommsDat generation from these settings is enabled.</desc>
+  <setting name="CommsDat generation enabled" ref="KCommsDatCreatorInputFileName" type="string">
+      <desc>This is the master switch that determines whether CommsDat is created in the first boot 
+    	of the device based on Configuration Tool output. Set this to Yes if you are creating variant 
+    	and need to configure anything under Default CommsDat settings.</desc>
+    <option name="No" value="" />
+    <option name="Yes" value="VariantData_commsdat.xml" />
+    </setting>
+  <setting name="CommsDatCreator startup status flag" ref="KCommsDatCreatorStartupStatus" type="int">
+      <desc>Read-only flag that indicates the CommsDatCreator start-up status in runtime.</desc>
+    </setting>
+  </feature>
+<feature name="Global settings" ref="Global">
+    <desc>
+  	Global networking related settings not tied to individual connection methods.
+  	</desc>
+  <setting name="Attachmode" ref="Attachmode" type="selection">
+      <desc>
+      GPRS attach mode (attach when needed/when available).
+      </desc>
+    <option name="When available" value="whenavailable" />
+    <option name="When needed" value="whenneeded" />
+    </setting>
+  <setting name="Default access point" ref="DefaultAP" type="string">
+      <desc>
+    	Default GPRS access point. Used when the phone is used as a modem for a PC.
+    	The corresponding UI setting is Connection-Packet data-Access point.
+    	</desc>
+    </setting>
+  <setting name="Default icon for DNs" ref="DefaultDnIcon" type="selection">
+      <desc>
+      Default icon for destination networks.
+      </desc>
+    <option name="internet" value="0" />
+    <option name="wap" value="1" />
+    <option name="mms" value="2" />
+    <option name="intranet" value="3" />
+    <option name="operator" value="4" />
+    <option name="icon1" value="5" />
+    <option name="icon2" value="6" />
+    <option name="icon3" value="7" />
+    <option name="icon4" value="8" />
+    <option name="icon5" value="9" />
+    <option name="icon6" value="10" />
+    <option name="default" value="11" />
+    </setting>
+  <setting name="LAN bearer default priority" ref="PriorityLan" type="string">
+      <desc>
+    	Default priority for LAN bearer type.
+    	</desc>
+    </setting>
+  <setting name="WLAN bearer default priority" ref="PriorityWlan" type="string">
+      <desc>
+    	Default priority for WLAN bearer type.
+    	</desc>
+    </setting>
+  <setting name="PAN bearer default priority" ref="PriorityPan" type="string">
+      <desc>
+    	Default priority for PAN bearer type.
+    	</desc>
+    </setting>
+  <setting name="Outgoing GPRS bearer default priority" ref="PriorityGprsOut" type="string">
+      <desc>
+    	Default priority for outgoing GPRS bearer type.
+    	</desc>
+    </setting>
+  <setting name="Incoming GPRS bearer default priority" ref="PriorityGprsIn" type="string">
+      <desc>
+    	Default priority for incoming GPRS bearer type.
+    	</desc>
+    </setting>
+  <setting name="CDMA2000 bearer default priority" ref="PriorityCdma2k" type="string">
+      <desc>
+    	Default priority for CDMA 2000 bearer type.
+    	</desc>
+    </setting>
+  <setting name="DialOut ISP bearer default priority" ref="PriorityDialOut" type="string">
+      <desc>
+    	Default priority for outgoing dial bearer type.
+    	</desc>
+    </setting>
+  <setting name="DialIn ISP bearer default priority" ref="PriorityDialIn" type="string">
+      <desc>
+    	Default priority for incoming dial bearer type.
+    	</desc>
+    </setting>
+  <setting name="VPN bearer default priority" ref="PriorityVpn" type="string">
+      <desc>
+    	Default priority for VPN bearer type.
+    	</desc>
+    </setting>
+  <setting name="MIP bearer default priority" ref="PriorityMip" type="string">
+      <desc>
+    	Default priority for MIP bearer type.
+    	</desc>
+    </setting>
+  <setting name="LAN bearer default UI priority" ref="UIPriorityLan" type="string">
+      <desc>
+    	Default UI priority of LAN connection.
+    	</desc>
+    </setting>
+  <setting name="WLAN bearer default UI priority" ref="UIPriorityWlan" type="string">
+      <desc>
+    	Default UI priority for WLAN bearer type.
+    	</desc>
+    </setting>
+  <setting name="PAN bearer default UI priority" ref="UIPriorityPan" type="string">
+      <desc>
+    	Default UI priority for PAN bearer type.
+    	</desc>
+    </setting>
+  <setting name="Outgoing GPRS bearer default UI priority" ref="UIPriorityGprsOut" type="string">
+      <desc>
+    	Default UI priority for outgoing GPRS bearer type.
+    	</desc>
+    </setting>
+  <setting name="Incoming GPRS bearer default UI priority" ref="UIPriorityGprsIn" type="string">
+      <desc>
+    	Default UI priority for incoming GPRS bearer type.
+    	</desc>
+    </setting>
+  <setting name="CDMA2000 bearer default UI priority" ref="UIPriorityCdma2k" type="string">
+      <desc>
+    	Default UI priority for CDMA 2000 bearer type.
+    	</desc>
+    </setting>
+  <setting name="DialOut ISP bearer default UI priority" ref="UIPriorityDialOut" type="string">
+      <desc>
+    	Default UI priority for outgoing dial bearer type.
+    	</desc>
+    </setting>
+  <setting name="DialIn ISP bearer default UI priority" ref="UIPriorityDialIn" type="string">
+      <desc>
+    	Default UI priority for incoming dial bearer type.
+    	</desc>
+    </setting>
+  <setting name="VPN bearer default UI priority" ref="UIPriorityVpn" type="string">
+      <desc>
+    	Default UI priority for VPN bearer type.
+    	</desc>
+    </setting>
+  <setting name="MIP bearer default UI priority" ref="UIPriorityMip" type="string">
+      <desc>
+    	Default UI priority for MIP bearer type.
+    	</desc>
+    </setting>
+  <setting name="Default connection type" ref="DefaultConnectionType" type="selection">
+      <desc>
+      Specifies how the applications' default connection is specified.
+      </desc>
+    <option name="Ask once" value="Ask once" />
+    <option name="Always ask" value="Always ask" />
+    <option name="Destination" value="Destination" />
+    <option name="Connection method" value="Connection method" />
+    </setting>
+  <setting name="Default connection name" ref="DefaultConnectionName" type="string">
+      <desc>
+    	The name of the default connection (connection method or destination network). 
+    	Default connection type parameter needs to be set accordingly.
+    	</desc>
+    </setting>
+  <setting name="GPRS last socket activity timeout" ref="GprsLastSocketActivityTimeout" type="int">
+      <desc>
+    	For GPRS the time (in seconds) to stay online when all socket activity has ceased. -1 for unlimited time.
+    	Leave empty to use the product default value.
+    	</desc>
+    </setting>
+  <setting name="GPRS last session closed timeout" ref="GprsLastSessionClosedTimeout" type="int">
+      <desc>
+    	For GPRS the time (in seconds) to stay online when session has closed. -1 for unlimited time.
+    	Leave empty to use the product default value.
+    	</desc>
+    </setting>
+  <setting name="GPRS last socket closed timeout" ref="GprsLastSocketClosedTimeout" type="int">
+      <desc>
+    	For GPRS the time (in seconds) to stay online when socket has closed. -1 for unlimited time.
+    	Leave empty to use the product default value.
+    	</desc>
+    </setting>
+  <setting name="CSD last socket activity timeout" ref="CsdLastSocketActivityTimeout" type="int">
+      <desc>
+    	For CSD the time (in seconds) to stay online when all socket activity has ceased. -1 for unlimited time.
+    	Leave empty to use the product default value.
+    	</desc>
+    </setting>
+  <setting name="CSD last session closed timeout" ref="CsdLastSessionClosedTimeout" type="int">
+      <desc>
+    	For CSD the time (in seconds) to stay online when all socket activity has ceased. -1 for unlimited time.
+    	Leave empty to use the product default value.
+    	</desc>
+    </setting>
+  <setting name="CSD last socket closed timeout" ref="CsdLastSocketClosedTimeout" type="int">
+      <desc>
+    	For CSD the time (in seconds) to stay online when all socket activity has ceased. -1 for unlimited time.
+    	Leave empty to use the product default value.
+    	</desc>
+    </setting>
+  <setting name="WLAN last socket activity timeout" ref="WlanLastSocketActivityTimeout" type="int">
+      <desc>
+    	For WLAN the time (in seconds) to stay online when all socket activity has ceased. -1 for unlimited time.
+    	Leave empty to use the product default value.
+    	</desc>
+    </setting>
+  <setting name="WLAN last session closed timeout" ref="WlanLastSessionClosedTimeout" type="int">
+      <desc>
+    	For WLAN the time (in seconds) to stay online when all socket activity has ceased. -1 for unlimited time.
+    	Leave empty to use the product default value.
+    	</desc>
+    </setting>
+  <setting name="WLAN last socket closed timeout" ref="WlanLastSocketClosedTimeout" type="int">
+      <desc>
+    	For WLAN the time (in seconds) to stay online when all socket activity has ceased. -1 for unlimited time.
+    	Leave empty to use the product default value.
+    	</desc>
+    </setting>
+  <setting name="WLAN background scan interval" ref="WlanBGScanInterval" type="selection">
+      <desc>
+      How often WLAN networks are scanned when idle.
+      </desc>
+    <option name="Never" value="0" />
+    <option name="Every minute" value="60" />
+    <option name="Every 2 minutes" value="120" />
+    <option name="Every 5 minutes" value="300" />
+    <option name="Every 10 minutes" value="600" />
+    </setting>
+  <setting name="WLAN use default settings" ref="WlanUseDefSettings" type="selection">
+      <desc>Defines whether default values are being used for the advanced WLAN settings (recommended). </desc>
+    <option name="No" value="0" />
+    <option name="Yes" value="1" />
+    </setting>
+  <setting name="WLAN long retry limit" ref="WlanLongRetry" type="int">
+      <desc>Defines how many times packets bigger than RTS Threshold are been resent.</desc>
+    </setting>
+  <setting name="WLAN short retry limit" ref="WlanShortRetry" type="int">
+      <desc>Defines how many times packets smaller than RTS Threshold are been resent.</desc>
+    </setting>
+  <setting name="WLAN RTS threshold" ref="WlanRTS" type="int">
+      <desc>Minimum size of a packet for which CTS/RTS handshake has been used.</desc>
+    </setting>
+  <setting name="WLAN TX power level" ref="WlanTxPowerLevel" type="selection">
+      <desc>Transmission power level in use. In mWs. 4, 10 or 100 mW.</desc>
+    <option name="100 mW" value="100" />
+    <option name="10 mW" value="10" />
+    <option name="4 mW" value="4" />
+    </setting>
+  <setting name="WLAN allow radio measurements" ref="WlanRadioMeasurements" type="selection">
+      <desc>Defines whether the CCX radio measurements are allowed.</desc>
+    <option name="No" value="0" />
+    <option name="Yes" value="1" />
+    </setting>
+  <setting name="WLAN power save" ref="WlanPowerMode" type="selection">
+      <desc>Defines whether power saving methods are active. Disabling WLAN
+      power save might increase interoperability but will dramatically shorten battery life.</desc>
+    <option name="On" value="1" />
+    <option name="Off" value="0" />
+    </setting>
+  </feature>
+<feature name="GPRS Access Points" ref="APs">
+    <desc>GPRS connection method (CM) definitions</desc>
+  <setting name="GPRS" ref="AP" type="sequence">
+      <setting name="Connection Name" ref="ConnectionName" type="string">
+        <desc>The CM name that is visible to the user.</desc>
+      </setting>
+    <setting name="Connection ID" ref="ConnectionId" type="int">
+        <desc>The CommsDat record id can be manually specified here. If left empty it is allocated automatically.
+      	Note: It needs to be verified carefully that the IDs are globally unique if allocated manually! 
+      	So a good idea is to either specify all the IDs manually or none at all.</desc>
+      </setting>
+    <setting name="Protected" ref="Protected" type="selection">
+        <desc>Defines whether connection method is protected (= cannot be edited by the user).</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Hidden" ref="Hidden" type="selection">
+        <desc>Defines whether connection method is hidden.</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Hidden Agent" ref="HiddenAgent" type="selection">
+        <desc>Connection method is hidden in CConnDlg or not (used to divide MMS and non-MMS CMs).</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Highlighted" ref="Highlighted" type="selection">
+        <desc>Connection method is highlighted or not.</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Seamlessness" ref="Seamlessness" type="selection">
+        <desc>Defines whether an IAP can be roamed to.</desc>
+      <option name="Confirm First" value="ConfirmFirst" />
+      <option name="Show Progress" value="ShowProgress" />
+      </setting>
+    <setting name="Network type" ref="NetworkType" type="selection">
+        <desc>Addressing that the network uses.</desc>
+      <option name="IPv4" value="IPv4" />
+      <option name="IPv6" value="IPv6" />
+      </setting>
+    <setting name="GPRS Access Point Name" ref="GPRS_AP_Name" type="string">
+        <desc>The access point name for this GPRS connection</desc>
+      </setting>
+    <setting name="User Name" ref="UserName" type="string">
+        <desc>User name</desc>
+      </setting>
+    <setting name="Prompt Password" ref="PromptPassword" type="selection">
+        <desc>Prompt password at connection time.</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Password" ref="Password" type="string">
+        <desc>Password.</desc>
+      </setting>
+    <setting name="Password authentication type" ref="PasswordAuthenticationType" type="selection">
+        <desc>Password authentication method.</desc>
+      <option name="Normal" value="Normal" />
+      <option name="Secure" value="Secure" />
+      </setting>
+    <setting name="WAP Gateway IP" ref="WAPGatewayIP" type="string">
+        <desc>WAP gateway IP address.</desc>
+      </setting>
+    <setting name="Starting Page" ref="StartingPage" type="string">
+        <desc>Start page of the connection method. In URL format.</desc>
+      </setting>
+    <setting name="WTLS Security" ref="WTLS_Security" type="selection">
+        <desc>Attempts a secure WTLS connection to the gateway.</desc>
+      <option name="On" value="On" />
+      <option name="Off" value="Off" />
+      </setting>
+    <setting name="Connection type" ref="WAP_ConnectionType" type="selection">
+        <desc>Indicates whether a connection-oriented or connectionless API should be used.</desc>
+      <option name="Continuous" value="Continuous" />
+      <option name="Temporary" value="Temporary" />
+      </setting>
+    <setting name="IPv4 Phone IP address" ref="PhoneIP" type="string">
+        <desc>IP address of the interface. 
+        Typically allocated automatically so this can be left empty.</desc>
+      </setting>
+    <setting name="IPv4 Primary Name Server" ref="PrimaryNameServer" type="string">
+        <desc>Address of the primary DNS server that resolves host names. 
+        Typically allocated automatically so this can be left empty.</desc>
+      </setting>
+    <setting name="IPv4 Secondary Name Server" ref="SecondaryNameServer" type="string">
+        <desc>Address of the secondary DNS server to connect if the primary DNS server is not available.
+        Typically allocated automatically so this can be left empty.</desc>
+      </setting>
+    <setting name="IPv6 Primary Name Server" ref="PrimaryIP6NameServer" type="string">
+        <desc>Address of the primary DNS server that resolves host names.
+        Typically allocated automatically so this can be left empty.</desc>
+      </setting>
+    <setting name="IPv6 Secondary Name Server" ref="SecondaryIP6NameServer" type="string">
+        <desc>Address of the secondary DNS server to connect if the primary DNS server is not available.
+        Typically allocated automatically so this can be left empty.</desc>
+      </setting>
+    <setting name="Proxy Server Address" ref="ProxyServerAddress" type="string">
+        <desc>Address of the HTTP/HTTPS proxy server.</desc>
+      </setting>
+    <setting name="Proxy Port Number" ref="ProxyPortNumber" type="string">
+        <desc>Port number of the HTTP/HTTPS proxy server.</desc>
+      </setting>
+    <setting name="Proxy protocol Name" ref="ProxyProtocolName" type="string">
+        <desc>Name of the protocol for which this proxy can be used. 
+        Typically http or https.</desc>
+      </setting>
+    <setting name="GPRS Use EDGE" ref="GprsUseEdge" type="selection">
+        <desc>Allow EDGE usage.</desc>
+      <option name="Yes" value="Yes" />
+      <option name="No" value="No" />
+      </setting>
+    <setting name="ISP Type" ref="IspType" type="selection">
+        <desc>Specifies the service provider type. Used when filtering connection methods for certain purpose.</desc>
+      <option name="Internet" value="0" />
+      <option name="WAP" value="1" />
+      <option name="Both" value="2" />
+      </setting>
+    </setting>
+  </feature>
+<feature name="WLAN Access Points" ref="WLAN_APs">
+    <desc>WLAN connection method (CM) definitions</desc>
+  <setting name="WLAN" ref="WLAN_AP" type="sequence">
+      <setting name="Connection Name" ref="ConnectionName" type="string">
+        <desc>The CM name that is visible to the user.</desc>
+      </setting>
+    <setting name="Connection ID" ref="ConnectionId" type="int">
+        <desc>The CommsDat record id can be manually specified here. If left empty it is allocated automatically.
+      	Note: It needs to be verified carefully that the IDs are globally unique if allocated manually! 
+      	So a good idea is to either specify all the IDs manually or none at all.</desc>
+      </setting>
+    <setting name="Protected" ref="Protected" type="selection">
+        <desc>Defines whether connection method is protected (= cannot be edited by the user).</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Hidden" ref="Hidden" type="selection">
+        <desc>Defines whether connection method is hidden.</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Hidden Agent" ref="HiddenAgent" type="selection">
+        <desc>Connection method is hidden in CConnDlg or not (used to divide MMS and non-MMS CMs).</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Highlighted" ref="Highlighted" type="selection">
+        <desc>Connection method is highlighted or not.</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Seamlessness" ref="Seamlessness" type="selection">
+        <desc>Defines whether an IAP can be roamed to.</desc>
+      <option name="Confirm First" value="ConfirmFirst" />
+      <option name="Show Progress" value="ShowProgress" />
+      </setting>
+    <setting name="Network Name" ref="NetworkName" type="string">
+        <desc>Service set identifier (SSID) of the primary WLAN network.</desc>
+      </setting>
+    <setting name="Starting Page" ref="StartingPage" type="string">
+        <desc>Start page of the connection method. In URL format.</desc>
+      </setting>
+    <setting name="Network Mode" ref="NetworkMode" type="string">
+        <desc>Determines the network infrastructure. 
+        If there is a WLAN access point in the network then this should be Infrastructure.</desc>
+      <option name="Infrastructure" value="Infrastructure" />
+      <option name="Ad-hoc" value="Ad-hoc" />
+      </setting>
+    <setting name="Security Mode" ref="SecurityMode" type="selection">
+        <desc>Security mode of the WLAN network.</desc>
+      <option name="Open" value="Open" />
+      <option name="WEP" value="WEP" />
+      <option name="802.1x" value="802.1x" />
+      <option name="WPA" value="WPA" />
+      <option name="WPA2" value="WPA2" />
+      </setting>
+    <setting name="IPv4 Primary Name Server" ref="PrimaryNameServer" type="string">
+        <desc>Address of the primary DNS server that resolves host names.
+        Typically allocated automatically in which case this should be empty.</desc>
+      </setting>
+    <setting name="IPv4 Secondary Name Server" ref="SecondaryNameServer" type="string">
+        <desc>Address of the secondary DNS server to connect if the primary DNS server is not available.
+        Typically allocated automatically in which case this should be empty.</desc>
+      </setting>
+    <setting name="IPv6 Primary Name Server" ref="PrimaryIP6NameServer" type="string">
+        <desc>Address of the primary DNS server that resolves host names.
+        Typically allocated automatically in which case this should be empty.</desc>
+      </setting>
+    <setting name="IPv6 Secondary Name Server" ref="SecondaryIP6NameServer" type="string">
+        <desc>Address of the secondary DNS server to connect if the primary DNS server is not available.
+        Typically allocated automatically in which case this should be empty.</desc>
+      </setting>
+    <setting name="WLAN IP Gateway Address" ref="WlanIpGatewayAddress" type="string">
+        <desc>The gateway IP address. 
+      Typically allocated automatically in which case this should be empty.</desc>
+      </setting>
+    <setting name="Wlan IP Net Mask" ref="WlanIpNetMask" type="string">
+        <desc>Network mask. Typically allocated automatically in which case this should be empty.</desc>
+      </setting>
+    <setting name="Proxy Server Address" ref="ProxyServerAddress" type="string">
+        <desc>Address of the HTTP/HTTPS proxy server.</desc>
+      </setting>
+    <setting name="Proxy Port Number" ref="ProxyPortNumber" type="string">
+        <desc>Port number of the HTTP/HTTPS proxy server.</desc>
+      </setting>
+    <setting name="Proxy protocol Name" ref="ProxyProtocolName" type="string">
+        <desc>Name of the protocol for which this proxy can be used. 
+        Typically http or https.</desc>
+      </setting>
+    <setting name="WLAN Scan SSID" ref="WLANScanSSID" type="selection">
+        <desc>Defines whether the SSID should be actively scanned. 
+        This is needed if the SSID is hidden (not broadcasted by the AP) </desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="WLAN Channel ID" ref="WlanChannelId" type="string">
+        <desc>
+      	802.11 Channel ID (1-14). Used only when connecting/setting up adhoc network.
+      	</desc>
+      </setting>
+    <setting name="IPv4 Phone IP address" ref="PhoneIP" type="string">
+        <desc>IP address of the interface.
+        Typically allocated automatically so this can be left empty.</desc>
+      </setting>
+    <setting name="WEP Key In Use" ref="WEPKeyInUse" type="selection">
+        <desc>Index of default WEP key. Used only when security mode is WEP.</desc>
+      <option name="key1" value="key1" />
+      <option name="key2" value="key2" />
+      <option name="key3" value="key3" />
+      <option name="key4" value="key4" />
+      </setting>
+    <setting name="WEP Auth Type" ref="WEPAuthType" type="selection">
+        <desc>WEP authentication mode. Only used when security mode is WEP.</desc>
+      <option name="Shared" value="Shared" />
+      <option name="Open" value="Open" />
+      </setting>
+    <setting name="WEP Key1 Length" ref="WEPKey1Length" type="selection">
+        <desc>WEP key length in bits.</desc>
+      <option name="64" value="64" />
+      <option name="128" value="128" />
+      <option name="256" value="256" />
+      </setting>
+    <setting name="WEP Key1 Format" ref="WEPKey1Format" type="selection">
+        <desc>WEP key format.</desc>
+      <option name="ASCII" value="ASCII" />
+      <option name="Hexadecimal" value="Hexadecimal" />
+      </setting>
+    <setting name="WEP Key1 Data" ref="WEPKey1Data" type="string">
+        <desc>WEP key data (in format specified by corresponding WEP key format field).</desc>
+      </setting>
+    <setting name="WEP Key2 Length" ref="WEPKey2Length" type="selection">
+        <desc>WEP key length in bits.</desc>
+      <option name="64" value="64" />
+      <option name="128" value="128" />
+      <option name="256" value="256" />
+      </setting>
+    <setting name="WEP Key2 Format" ref="WEPKey2Format" type="selection">
+        <desc>WEP key format.</desc>
+      <option name="ASCII" value="ASCII" />
+      <option name="Hexadecimal" value="Hexadecimal" />
+      </setting>
+    <setting name="WEP Key2 Data" ref="WEPKey2Data" type="string">
+        <desc>WEP key data (in format specified by corresponding WEP key format field).</desc>
+      </setting>
+    <setting name="WEP Key3 Length" ref="WEPKey3Length" type="selection">
+        <desc>WEP key length in bits.</desc>
+      <option name="64" value="64" />
+      <option name="128" value="128" />
+      <option name="256" value="256" />
+      </setting>
+    <setting name="WEP Key3 Format" ref="WEPKey3Format" type="selection">
+        <desc>WEP key format.</desc>
+      <option name="ASCII" value="ASCII" />
+      <option name="Hexadecimal" value="Hexadecimal" />
+      </setting>
+    <setting name="WEP Key3 Data" ref="WEPKey3Data" type="string">
+        <desc>WEP key data (in format specified by corresponding WEP key format field).</desc>
+      </setting>
+    <setting name="WEP Key4 Length" ref="WEPKey4Length" type="selection">
+        <desc>WEP key length in bits.</desc>
+      <option name="64" value="64" />
+      <option name="128" value="128" />
+      <option name="256" value="256" />
+      </setting>
+    <setting name="WEP Key4 Format" ref="WEPKey4Format" type="selection">
+        <desc>WEP key format.</desc>
+      <option name="ASCII" value="ASCII" />
+      <option name="Hexadecimal" value="Hexadecimal" />
+      </setting>
+    <setting name="WEP Key4 Data" ref="WEPKey4Data" type="string">
+        <desc>WEP key data (in format specified by corresponding WEP key format field).</desc>
+      </setting>
+    <setting name="WPA Pre-shared Key" ref="WPAPresharedKey" type="string">
+        <desc>WPA/WPA2 pre-shared key in plain text. ASCII character set values between 32-126 must be used. Minimum length is 8 characters and maximum 63.
+        You need to also define the WPA pre-shared key length field accordingly</desc>
+      </setting>
+    <setting name="WPA Use of Pre-shared Key" ref="WPAUseOfPresharedKey" type="selection">
+        <desc>Specifies that when the security mode is WPA or WPA2 if the PSK mode is enabled. 
+        If this is off then EAP mode is used and the list of EAPs needs to be defined.</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="WPA Pre-shared key length" ref="WPAKeyLength" type="int">
+        <desc>The length of the specified pre-shared key (in WPA pre-shared key field)</desc>
+      </setting>
+    <setting name="WPA List Of EAPs" ref="WPAListOfEAPs" type="string">
+        <desc>
+      	A list of Extensible Authentication Protocols (EAPs) in use. The format is +xxx,+xxx,+xxx where xxx indicates the enabled EAP method ID as
+      	specified in the IANA registry: http://www.iana.org/assignments/eap-numbers. For example to enable EAP-SIM the string needs to be "+018". 
+      	The list is in priority order, highest priority first.      	
+      	</desc>
+      </setting>
+    <setting name="EAP-GTC user name" ref="EapGtcUsername" type="string">
+        <desc>The username used with EAP-GTC.</desc>
+      </setting>
+    <setting name="EAP-GTC session validity time" ref="EapGtcSessionValidityTime" type="int">
+        <desc>Specifies how long single session is kept in memory (so no new password queries or similar appear).</desc>
+      </setting>
+    <setting name="EAP-GTC tunneling method" ref="EapGtcEncapsulation" type="selection">
+        <desc>Defines which EAP tunneling method is used with EAP-GTC.</desc>
+      <option name="EAP-PEAP" value="25" />
+      <option name="EAP-TTLS" value="21" />
+      <option name="EAP-FAST" value="43" />
+      </setting>
+    <setting name="EAP-TLS user name" ref="EapTlsUsername" type="string">
+        <desc>The username used with EAP-TLS.</desc>
+      </setting>
+    <setting name="EAP-TLS realm" ref="EapTlsRealm" type="string">
+        <desc>The realm used for device identification to the server.</desc>
+      </setting>
+    <setting name="EAP-TLS verify server realm" ref="EapTlsVerifyServerRealm" type="selection">
+        <desc>Specifies whether the server's realm is compared with own realm. 
+      	This provides extra security but it depends on the network infrastructure and set-up whether this will work.</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="EAP-TLS require client authentication" ref="EapTlsRequireClientAuth" type="selection">
+        <desc>Specifies whether TLS requires that the server authenticates it (the client).</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="EAP-TLS session validity time" ref="EapTlsSessionValidityTime" type="int">
+        <desc>Specifies how long single session is kept in memory (so no new password queries or similar appear)</desc>
+      </setting>
+    <setting name="EAP-TLS cipher suites" ref="EapTlsCipherSuites" type="string">
+        <desc>The list of allowed cipher suites. In the format +xxx,+xxx,+xxx... where xxx is the cipher suite identifier.
+      	004: TLS_RSA_WITH_RC4_128_MD5, 005: TLS_RSA_WITH_RC4_128_SHA, 010: TLS_RSA_WITH_3DES_EDE_CBC_SHA,
+				019:	TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA, 022: TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA, 047: TLS_RSA_WITH_AES_128_CBC_SHA
+				050:	TLS_DHE_DSS_WITH_AES_128_CBC_SHA, 051:	TLS_DHE_RSA_WITH_AES_128_CBC_SHA, 052: TLS_DH_anon_WITH_AES_128_CBC_SHA 
+				For example +004 enables only RSA with RC4 and MD5.
+				</desc>
+      </setting>
+    <setting name="EAP-TLS user certificate subject key id" ref="EapTlsUserCertSubjectKeyId" type="string">
+        <desc>The subject key id value of the user certificate. 
+        Currently this field is the only one that can be used to identify the certificate.</desc>
+      </setting>
+    <setting name="EAP-TLS user certificate issuer" ref="EapTlsUserCertIssuerName" type="string">
+        <desc>The issuer of the user certificate. Ignored by the implementation currently!</desc>
+      </setting>
+    <setting name="EAP-TLS user certificate serial number" ref="EapTlsUserCertSerialNumber" type="string">
+        <desc>The serial number of the user certificate. Ignored by the implementation currently!</desc>
+      </setting>
+    <setting name="EAP-TLS CA certificate subject key id" ref="EapTlsCaCertSubjectKeyId" type="string">
+        <desc>The subject key id value of the CA certificate.
+        Currently this field is the only one that can be used to identify the certificate.</desc>
+      </setting>
+    <setting name="EAP-TLS CA certificate issuer" ref="EapTlsCaCertIssuerName" type="string">
+        <desc>The issuer of the CA certificate. Ignored by the implementation currently!</desc>
+      </setting>
+    <setting name="EAP-TLS CA certificate serial number" ref="EapTlsCaCertSerialNumber" type="string">
+        <desc>The serial number of the CA certificate. Ignored by the implementation currently!</desc>
+      </setting>
+    <setting name="EAP-TLS tunneling method" ref="EapTlsEncapsulation" type="selection">
+        <desc>Defines which EAP tunneling method is used with EAP-TLS.</desc>
+      <option name="None" value="" />
+      <option name="EAP-PEAP" value="25" />
+      <option name="EAP-TTLS" value="21" />
+      <option name="EAP-FAST" value="43" />
+      </setting>
+    <setting name="EAP-LEAP user name" ref="EapLeapUsername" type="string">
+        <desc>The username used with EAP-LEAP.</desc>
+      </setting>
+    <setting name="EAP-LEAP password" ref="EapLeapPassword" type="string">
+        <desc>The password used with EAP-LEAP.</desc>
+      </setting>
+    <setting name="EAP-LEAP session validity time" ref="EapLeapSessionValidityTime" type="int">
+        <desc>Specifies how long single session is kept in memory (so no new password queries or similar appear).</desc>
+      </setting>
+    <setting name="EAP-SIM user name" ref="EapSimUsername" type="string">
+        <desc>The username used with EAP-SIM.</desc>
+      </setting>
+    <setting name="EAP-SIM realm" ref="EapSimRealm" type="string">
+        <desc>The realm used for device identification to the server.</desc>
+      </setting>
+    <setting name="EAP-SIM pseudonyms allowed" ref="EapSimUsePseudonyms" type="selection">
+        <desc>Specifies whether IMSI is sent always when authentication or is pseudonym usage allowed.</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="EAP-SIM session validity time" ref="EapSimSessionValidityTime" type="int">
+        <desc>Specifies how long single session is kept in memory (so no new password queries or similar appear)</desc>
+      </setting>
+    <setting name="EAP-SIM tunneling method" ref="EapSimEncapsulation" type="selection">
+        <desc>Defines which EAP tunneling method is used with EAP-SIM.</desc>
+      <option name="None" value="" />
+      <option name="EAP-PEAP" value="25" />
+      <option name="EAP-TTLS" value="21" />
+      <option name="EAP-FAST" value="43" />
+      </setting>
+    <setting name="EAP-TTLS user name" ref="EapTtlsUsername" type="string">
+        <desc>The username used with EAP-TTLS.</desc>
+      </setting>
+    <setting name="EAP-TTLS realm" ref="EapTtlsRealm" type="string">
+        <desc>The realm used for device identification to the server.</desc>
+      </setting>
+    <setting name="EAP-TTLS verify server realm" ref="EapTtlsVerifyServerRealm" type="selection">
+        <desc>Specifies whether the server's realm is compared with own realm. 
+      	This provides extra security but it depends on the network infrastructure and set-up whether this will work.</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="EAP-TTLS require client authentication" ref="EapTtlsRequireClientAuth" type="selection">
+        <desc>Specifies whether TTLS requires that the server authenticates it (the client).</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="EAP-TTLS session validity time" ref="EapTtlsSessionValidityTime" type="int">
+        <desc>Specifies how long single session is kept in memory (so no new password queries or similar appear).</desc>
+      </setting>
+    <setting name="EAP-TTLS cipher suites" ref="EapTtlsCipherSuites" type="string">
+        <desc>The list of allowed cipher suites. In the format +xxx,+xxx,+xxx... where xxx is the cipher suite identifier.
+      	004: TLS_RSA_WITH_RC4_128_MD5, 005: TLS_RSA_WITH_RC4_128_SHA, 010: TLS_RSA_WITH_3DES_EDE_CBC_SHA,
+				019:	TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA, 022: TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA, 047: TLS_RSA_WITH_AES_128_CBC_SHA
+				050:	TLS_DHE_DSS_WITH_AES_128_CBC_SHA, 051:	TLS_DHE_RSA_WITH_AES_128_CBC_SHA, 052: TLS_DH_anon_WITH_AES_128_CBC_SHA 
+				For example +004 enables only RSA with RC4 and MD5.
+				</desc>
+      </setting>
+    <setting name="EAP-TTLS tunneled methods" ref="EapTtlsEncapsulatedTypes" type="string">
+        <desc>A list of Extensible Authentication Protocols (EAPs) in tunneled by EAP-TTLS. The format is +xxx,+xxx,+xxx where xxx indicates the enabled EAP method ID as
+      	specified in the IANA registry: http://www.iana.org/assignments/eap-numbers. For example to enable EAP-SIM encapsulation the string needs to be "+018". 
+      	The list is in priority order, highest priority first. Note that the encapsulate type's encapsulation parameter needs to be configured accordingly. </desc>
+      </setting>
+    <setting name="EAP-TTLS user certificate subject key id" ref="EapTtlsUserCertSubjectKeyId" type="string">
+        <desc>The subject key id value of the user certificate.
+        Currently this field is the only one that can be used to identify the certificate.</desc>
+      </setting>
+    <setting name="EAP-TTLS user certificate issuer" ref="EapTtlsUserCertIssuerName" type="string">
+        <desc>The issuer of the user certificate. Ignored by the implementation currently!</desc>
+      </setting>
+    <setting name="EAP-TTLS user certificate serial number" ref="EapTtlsUserCertSerialNumber" type="string">
+        <desc>The serial number of the user certificate. Ignored by the implementation currently!</desc>
+      </setting>
+    <setting name="EAP-TTLS CA certificate subject key id" ref="EapTtlsCaCertSubjectKeyId" type="string">
+        <desc>The subject key id value of the CA certificate.
+        Currently this field is the only one that can be used to identify the certificate.</desc>
+      </setting>
+    <setting name="EAP-TTLS CA certificate issuer" ref="EapTtlsCaCertIssuerName" type="string">
+        <desc>The issuer of the CA certificate. Ignored by the implementation currently!</desc>
+      </setting>
+    <setting name="EAP-TTLS CA certificate serial number" ref="EapTtlsCaCertSerialNumber" type="string">
+        <desc>The serial number of the CA certificate. Ignored by the implementation currently!</desc>
+      </setting>
+    <setting name="EAP-AKA user name" ref="EapAkaUsername" type="string">
+        <desc>The username used with EAP-AKA.</desc>
+      </setting>
+    <setting name="EAP-AKA realm" ref="EapAkaRealm" type="string">
+        <desc>The realm used for device identification to the server.</desc>
+      </setting>
+    <setting name="EAP-AKA pseudonyms allowed" ref="EapAkaUsePseudonyms" type="selection">
+        <desc>Specifies whether IMSI is sent always when authentication or is pseudonym usage allowed.</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="EAP-AKA session validity time" ref="EapAkaSessionValidityTime" type="int">
+        <desc>Specifies how long single session is kept in memory (so no new password queries or similar appear).</desc>
+      </setting>
+    <setting name="EAP-AKA tunneling method" ref="EapAkaEncapsulation" type="selection">
+        <desc>Defines which EAP tunneling method is used with EAP-AKA.</desc>
+      <option name="None" value="" />
+      <option name="EAP-PEAP" value="25" />
+      <option name="EAP-TTLS" value="21" />
+      <option name="EAP-FAST" value="43" />
+      </setting>
+    <setting name="EAP-PEAP user name" ref="EapPeapUsername" type="string">
+        <desc>The username used with EAP-PEAP.</desc>
+      </setting>
+    <setting name="EAP-PEAP realm" ref="EapPeapRealm" type="string">
+        <desc>The realm used for device identification to the server.</desc>
+      </setting>
+    <setting name="EAP-PEAP verify server realm" ref="EapPeapVerifyServerRealm" type="selection">
+        <desc>Specifies whether the server's realm is compared with own realm. 
+      	This provides extra security but it depends on the network infrastructure and set-up whether this will work.</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="EAP-PEAP require client authentication" ref="EapPeapRequireClientAuth" type="selection">
+        <desc>Specifies whether PEAP requires that the server authenticates it (the client).</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="EAP-PEAP session validity time" ref="EapPeapSessionValidityTime" type="int">
+        <desc>Specifies how long single session is kept in memory (so no new password queries or similar appear)</desc>
+      </setting>
+    <setting name="EAP-PEAP cipher suites" ref="EapPeapCipherSuites" type="string">
+        <desc>The list of allowed cipher suites. In the format +xxx,+xxx,+xxx... where xxx is the cipher suite identifier.
+      	004: TLS_RSA_WITH_RC4_128_MD5, 005: TLS_RSA_WITH_RC4_128_SHA, 010: TLS_RSA_WITH_3DES_EDE_CBC_SHA,
+				019:	TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA, 022: TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA, 047: TLS_RSA_WITH_AES_128_CBC_SHA
+				050:	TLS_DHE_DSS_WITH_AES_128_CBC_SHA, 051:	TLS_DHE_RSA_WITH_AES_128_CBC_SHA, 052: TLS_DH_anon_WITH_AES_128_CBC_SHA 
+				For example +004 enables only RSA with RC4 and MD5.
+				</desc>
+      </setting>
+    <setting name="EAP-PEAP version 0 allowed" ref="EapPeapV0Allowed" type="selection">
+        <desc>Is PEAP version 0 allowed. If in doubt enable only this one.</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="EAP-PEAP version 1 allowed" ref="EapPeapV1Allowed" type="selection">
+        <desc>Is PEAP version 1 allowed.</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="EAP-PEAP version 2 allowed" ref="EapPeapV2Allowed" type="selection">
+        <desc>Is PEAP version 2 allowed.</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="EAP-PEAP tunneled methods" ref="EapPeapEncapsulatedTypes" type="string">
+        <desc>A list of Extensible Authentication Protocols (EAPs) in tunneled by EAP-PEAP. The format is +xxx,+xxx,+xxx where xxx indicates the enabled EAP method ID as
+      	specified in the IANA registry: http://www.iana.org/assignments/eap-numbers. For example to enable EAP-SIM encapsulation the string needs to be "+018". 
+      	The list is in priority order, highest priority first. Note that the encapsulate type's encapsulation parameter needs to be configured accordingly. </desc>
+      </setting>
+    <setting name="EAP-PEAP user certificate subject key id" ref="EapPeapUserCertSubjectKeyId" type="string">
+        <desc>The subject key id value of the user certificate.
+        Currently this field is the only one that can be used to identify the certificate.</desc>
+      </setting>
+    <setting name="EAP-PEAP user certificate issuer" ref="EapPeapUserCertIssuerName" type="string">
+        <desc>The issuer of the user certificate. Ignored by the implementation currently!</desc>
+      </setting>
+    <setting name="EAP-PEAP user certificate serial number" ref="EapPeapUserCertSerialNumber" type="string">
+        <desc>The serial number of the user certificate. Ignored by the implementation currently!</desc>
+      </setting>
+    <setting name="EAP-PEAP CA certificate subject key id" ref="EapPeapCaCertSubjectKeyId" type="string">
+        <desc>The subject key id value of the CA certificate.
+        Currently this field is the only one that can be used to identify the certificate.</desc>
+      </setting>
+    <setting name="EAP-PEAP CA certificate issuer" ref="EapPeapCaCertIssuerName" type="string">
+        <desc>The issuer of the CA certificate. Ignored by the implementation currently!</desc>
+      </setting>
+    <setting name="EAP-PEAP CA certificate serial number" ref="EapPeapCaCertSerialNumber" type="string">
+        <desc>The serial number of the CA certificate. Ignored by the implementation currently!</desc>
+      </setting>
+    <setting name="EAP-MSCHAPv2 user name" ref="EapMschapv2Username" type="string">
+        <desc>The username used with EAP-MSCHAPv2.</desc>
+      </setting>
+    <setting name="EAP-MSCHAPv2 password" ref="EapMschapv2Password" type="string">
+        <desc>The password used with EAP-MSCHAPv2.</desc>
+      </setting>
+    <setting name="EAP-MSCHAPv2 session validity time" ref="EapMschapv2SessionValidityTime" type="int">
+        <desc>Specifies how long single session is kept in memory (so no new password queries or similar appear)</desc>
+      </setting>
+    <setting name="EAP-MSCHAPv2 tunneling method" ref="EapMschapv2Encapsulation" type="selection">
+        <desc>Defines which EAP tunneling method is used with EAP-MSCHAPv2.</desc>
+      <option name="EAP-PEAP" value="25" />
+      <option name="EAP-TTLS" value="21" />
+      <option name="EAP-FAST" value="43" />
+      </setting>
+    <setting name="EAP-FAST user name" ref="EapFastUsername" type="string">
+        <desc>The username used with EAP-FAST.</desc>
+      </setting>
+    <setting name="EAP-FAST realm" ref="EapFastRealm" type="string">
+        <desc>The realm used for device identification to the server.</desc>
+      </setting>
+    <setting name="EAP-FAST verify server realm" ref="EapFastVerifyServerRealm" type="selection">
+        <desc>Specifies whether the server's realm is compared with own realm. 
+      	This provides extra security but it depends on the network infrastructure and set-up whether this will work.</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="EAP-FAST require client authentication" ref="EapFastRequireClientAuth" type="selection">
+        <desc>Specifies whether TTLS requires that the server authenticates it (the client).</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="EAP-FAST session validity time" ref="EapFastSessionValidityTime" type="int">
+        <desc>Specifies how long single session is kept in memory (so no new password queries or similar appear)</desc>
+      </setting>
+    <setting name="EAP-FAST cipher suites" ref="EapFastCipherSuites" type="string">
+        <desc>The list of allowed cipher suites. In the format +xxx,+xxx,+xxx... where xxx is the cipher suite identifier.
+      	004: TLS_RSA_WITH_RC4_128_MD5, 005: TLS_RSA_WITH_RC4_128_SHA, 010: TLS_RSA_WITH_3DES_EDE_CBC_SHA,
+				019:	TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA, 022: TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA, 047: TLS_RSA_WITH_AES_128_CBC_SHA
+				050:	TLS_DHE_DSS_WITH_AES_128_CBC_SHA, 051:	TLS_DHE_RSA_WITH_AES_128_CBC_SHA, 052: TLS_DH_anon_WITH_AES_128_CBC_SHA 
+				For example +004 enables only RSA with RC4 and MD5.
+				</desc>
+      </setting>
+    <setting name="EAP-FAST tunneled methods" ref="EapFastEncapsulatedTypes" type="string">
+        <desc>A list of Extensible Authentication Protocols (EAPs) in tunneled by EAP-FAST. The format is +xxx,+xxx,+xxx where xxx indicates the enabled EAP method ID as
+      	specified in the IANA registry: http://www.iana.org/assignments/eap-numbers. For example to enable EAP-SIM encapsulation the string needs to be "+018". 
+      	The list is in priority order, highest priority first. Note that the encapsulate type's encapsulation parameter needs to be configured accordingly. </desc>
+      </setting>
+    <setting name="EAP-FAST authenticated provisioning mode allowed" ref="EapFastAuthProvModeAllowed" type="selection">
+        <desc>EAP-FAST authenticated provisioning mode allowed</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="EAP-FAST unauthenticated provisioning mode allowed" ref="EapFastUnauthProvModeAllowed" type="selection">
+        <desc>EAP-FAST unauthenticated provisioning mode allowed</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="EAP-FAST warn ADHP no PAC" ref="EapFastWarnADHPNoPAC" type="selection">
+        <desc>EAP-FAST warn ADHP no PAC</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="EAP-FAST warn ADHP no matching PAC" ref="EapFastWarnADHPNoMatchingPAC" type="selection">
+        <desc>EAP-FAST warn ADHP no matching PAC</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="EAP-FAST warn not default server" ref="EapFastWarnNotDefaultServer" type="selection">
+        <desc>EAP-FAST warn not default server</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="EAP-FAST user certificate subject key id" ref="EapFastUserCertSubjectKeyId" type="string">
+        <desc>The subject key id value of the user certificate.
+        Currently this field is the only one that can be used to identify the certificate.</desc>
+      </setting>
+    <setting name="EAP-FAST user certificate issuer" ref="EapFastUserCertIssuerName" type="string">
+        <desc>The issuer of the user certificate. Ignored by the implementation currently!</desc>
+      </setting>
+    <setting name="EAP-FAST user certificate serial number" ref="EapFastUserCertSerialNumber" type="string">
+        <desc>The serial number of the user certificate. Ignored by the implementation currently!</desc>
+      </setting>
+    <setting name="EAP-FAST CA certificate subject key id" ref="EapFastCaCertSubjectKeyId" type="string">
+        <desc>The subject key id value of the CA certificate.
+        Currently this field is the only one that can be used to identify the certificate.</desc>
+      </setting>
+    <setting name="EAP-FAST CA certificate issuer" ref="EapFastCaCertIssuerName" type="string">
+        <desc>The issuer of the CA certificate. Ignored by the implementation currently!</desc>
+      </setting>
+    <setting name="EAP-FAST CA certificate serial number" ref="EapFastCaCertSerialNumber" type="string">
+        <desc>The serial number of the CA certificate. Ignored by the implementation currently!</desc>
+      </setting>
+    <setting name="MSCHAPv2 user name" ref="Mschapv2Username" type="string">
+        <desc>The username used with MSCHAPv2.</desc>
+      </setting>
+    <setting name="MSCHAPv2 password" ref="Mschapv2Password" type="string">
+        <desc>The password used with MSCHAPv2.</desc>
+      </setting>
+    <setting name="MSCHAPv2 session validity time" ref="Mschapv2SessionValidityTime" type="int">
+        <desc>Specifies how long single session is kept in memory (so no new password queries or similar appear).</desc>
+      </setting>
+    <setting name="MSCHAPv2 tunneling method" ref="Mschapv2Encapsulation" type="selection">
+        <desc>Defines which EAP tunneling method is used with MSCHAPv2. Needs to be EAP-TTLS.</desc>
+      <option name="EAP-TTLS" value="21" />
+      </setting>
+    </setting>
+  </feature>
+<feature name="CSD Access Points" ref="CSD_APs">
+    <desc>Circuit-Switched Data connection methods</desc>
+  <setting name="CSD" ref="CSD_AP" type="sequence">
+      <setting name="Connection Name" ref="ConnectionName" type="string">
+        <desc>The CM name that is visible to the user.</desc>
+      </setting>
+    <setting name="Connection ID" ref="ConnectionId" type="int">
+        <desc>The CommsDat record id can be manually specified here. If left empty it is allocated automatically.
+      	Note: It needs to be verified carefully that the IDs are globally unique if allocated manually! 
+      	So a good idea is to either specify all the IDs manually or none at all.</desc>
+      </setting>
+    <setting name="Protected" ref="Protected" type="selection">
+        <desc>Defines whether connection method is protected (= cannot be edited by the user).</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Hidden" ref="Hidden" type="selection">
+        <desc>Defines whether connection method is hidden.</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Hidden Agent" ref="HiddenAgent" type="selection">
+        <desc>Connection method is hidden in CConnDlg or not (used to divide MMS and non-MMS CMs).</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Highlighted" ref="Highlighted" type="selection">
+        <desc>Connection method is highlighted or not.</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Seamlessness" ref="Seamlessness" type="selection">
+        <desc>Defines whether an IAP can be roamed to.</desc>
+      <option name="Confirm First" value="ConfirmFirst" />
+      <option name="Show Progress" value="ShowProgress" />
+      </setting>
+    <setting name="User Name" ref="UserName" type="string">
+        <desc>Username for the connection.</desc>
+      </setting>
+    <setting name="Prompt Password" ref="PromptPassword" type="selection">
+        <desc>Prompt password on connection set-up time.</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Password" ref="Password" type="string">
+        <desc>Password.</desc>
+      </setting>
+    <setting name="Password Authentication type" ref="PasswordAuthenticationType" type="selection">
+        <desc>Password authentication type.</desc>
+      <option name="Normal" value="Normal" />
+      <option name="Secure" value="Secure" />
+      </setting>
+    <setting name="WAP Gateway IP" ref="WAPGatewayIP" type="string">
+        <desc>WAP gateway IP.</desc>
+      </setting>
+    <setting name="Starting Page" ref="StartingPage" type="string">
+        <desc>Starting page.</desc>
+      </setting>
+    <setting name="WTLS Security" ref="WTLS_Security" type="selection">
+        <desc>WTLS security.</desc>
+      <option name="On" value="On" />
+      <option name="Off" value="Off" />
+      </setting>
+    <setting name="Connection type" ref="WAP_ConnectionType" type="selection">
+        <desc>Connection type.</desc>
+      <option name="Continuous" value="Continuous" />
+      <option name="Temporary" value="Temporary" />
+      </setting>
+    <setting name="IPv4 Phone IP address" ref="PhoneIP" type="string">
+        <desc>IP address of the interface. 
+        Typically allocated automatically so this can be left empty.</desc>
+      </setting>
+    <setting name="IPv4 Primary Name Server" ref="PrimaryNameServer" type="string">
+        <desc>Address of the primary DNS server that resolves host names. 
+        Typically allocated automatically so this can be left empty.</desc>
+      </setting>
+    <setting name="IPv4 Secondary Name Server" ref="SecondaryNameServer" type="string">
+        <desc>Address of the secondary DNS server to connect if the primary DNS server is not available.
+        Typically allocated automatically so this can be left empty.</desc>
+      </setting>
+    <setting name="IPv6 Primary Name Server" ref="PrimaryIP6NameServer" type="string">
+        <desc>Address of the primary DNS server that resolves host names.
+        Typically allocated automatically so this can be left empty.</desc>
+      </setting>
+    <setting name="IPv6 Secondary Name Server" ref="SecondaryIP6NameServer" type="string">
+        <desc>Address of the secondary DNS server to connect if the primary DNS server is not available.
+        Typically allocated automatically so this can be left empty.</desc>
+      </setting>
+    <setting name="Proxy Server Address" ref="ProxyServerAddress" type="string">
+        <desc>Address of the HTTP/HTTPS proxy server.</desc>
+      </setting>
+    <setting name="Proxy Port Number" ref="ProxyPortNumber" type="string">
+        <desc>Port number of the HTTP/HTTPS proxy server.</desc>
+      </setting>
+    <setting name="Proxy protocol Name" ref="ProxyProtocolName" type="string">
+        <desc>Name of the protocol for which this proxy can be used. 
+        Typically http or https.</desc>
+      </setting>
+    <setting name="Default Tel Number (Mandatory)" ref="DefaultTelNumber" type="string">
+        <desc>Default telephone number.</desc>
+      </setting>
+    <setting name="Bearer Speed" ref="BearerSpeed" type="selection">
+        <desc>Bearer speed</desc>
+      <option name="Autodetect" value="Autodetect" />
+      <option name="9600" value="9600" />
+      <option name="14400" value="14400" />
+      <option name="19200" value="19200" />
+      <option name="28800" value="28800" />
+      <option name="38400" value="38400" />
+      <option name="43200" value="43200" />
+      <option name="56000" value="56000" />
+      </setting>
+    <setting name="Bearer Call Type Isdn" ref="BearerCallTypeIsdn" type="selection">
+        <desc>Bearer Call Type Isdn</desc>
+      <option name="Analogue" value="Analogue" />
+      <option name="Isdn v110" value="Isdn v110" />
+      <option name="Isdn v120" value="Isdn v120" />
+      </setting>
+    <setting name="Call back Enabled" ref="CallbackEnabled" type="selection">
+        <desc>Is callback enabled.</desc>
+      <option name="Yes" value="Yes" />
+      <option name="No" value="No" />
+      </setting>
+    <setting name="Call back type" ref="CallbackType" type="selection">
+        <desc>Callback type.</desc>
+      <option name="Server Number" value="Server Number" />
+      <option name="Other Number" value="Other Number" />
+      </setting>
+    <setting name="Call back number" ref="CallbackInfo" type="string">
+        <desc>Callback number.</desc>
+      </setting>
+    <setting name="Enable PPP Compression" ref="EnableSWCompression" type="selection">
+        <desc>Enable compression</desc>
+      <option name="Yes" value="Yes" />
+      <option name="No" value="No" />
+      </setting>
+    <setting name="Use Login Script" ref="UseLoginScript" type="selection">
+        <desc>Use login script</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Login Script" ref="LoginScript" type="string">
+        <desc>Login script</desc>
+      </setting>
+    <setting name="Modem init string" ref="InitString" type="string">
+        <desc>Modem init string</desc>
+      </setting>
+    </setting>
+  </feature>
+<feature name="HSCD Access Points" ref="HSCSD_APs">
+    <desc>High-speed Circuit-Switched Data connection methods</desc>
+  <setting name="HSCSD" ref="HSCSD_AP" type="sequence">
+      <setting name="Connection Name" ref="ConnectionName" type="string">
+        <desc>The CM name that is visible to the user.</desc>
+      </setting>
+    <setting name="Connection ID" ref="ConnectionId" type="int">
+        <desc>The CommsDat record id can be manually specified here. If left empty it is allocated automatically.
+      	Note: It needs to be verified carefully that the IDs are globally unique if allocated manually! 
+      	So a good idea is to either specify all the IDs manually or none at all.</desc>
+      </setting>
+    <setting name="Protected" ref="Protected" type="selection">
+        <desc>Defines whether connection method is protected (= cannot be edited by the user).</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Hidden" ref="Hidden" type="selection">
+        <desc>Defines whether connection method is hidden.</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Hidden Agent" ref="HiddenAgent" type="selection">
+        <desc>Connection method is hidden in CConnDlg or not (used to divide MMS and non-MMS CMs).</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Highlighted" ref="Highlighted" type="selection">
+        <desc>Connection method is highlighted or not.</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Seamlessness" ref="Seamlessness" type="selection">
+        <desc>Defines whether an IAP can be roamed to.</desc>
+      <option name="Confirm First" value="ConfirmFirst" />
+      <option name="Show Progress" value="ShowProgress" />
+      </setting>
+    <setting name="User Name" ref="UserName" type="string">
+        <desc>User name</desc>
+      </setting>
+    <setting name="Prompt Password" ref="PromptPassword" type="selection">
+        <desc>Prompt password at connection time.</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Password" ref="Password" type="string">
+        <desc>Password.</desc>
+      </setting>
+    <setting name="Password authentication type" ref="PasswordAuthenticationType" type="selection">
+        <desc>Password authentication method.</desc>
+      <option name="Normal" value="Normal" />
+      <option name="Secure" value="Secure" />
+      </setting>
+    <setting name="WAP Gateway IP" ref="WAPGatewayIP" type="string">
+        <desc>WAP gateway IP address.</desc>
+      </setting>
+    <setting name="Starting Page" ref="StartingPage" type="string">
+        <desc>Start page of the connection method.</desc>
+      </setting>
+    <setting name="WTLS Security" ref="WTLS_Security" type="selection">
+        <desc>Attempts a secure WTLS connection to the gateway.</desc>
+      <option name="On" value="On" />
+      <option name="Off" value="Off" />
+      </setting>
+    <setting name="Connection type" ref="WAP_ConnectionType" type="selection">
+        <desc>Indicates whether a connection-oriented or connectionless API should be used.</desc>
+      <option name="Continuous" value="Continuous" />
+      <option name="Temporary" value="Temporary" />
+      </setting>
+    <setting name="IPv4 Phone IP address" ref="PhoneIP" type="string">
+        <desc>IP address of the interface. 
+        Typically allocated automatically so this can be left empty.</desc>
+      </setting>
+    <setting name="IPv4 Primary Name Server" ref="PrimaryNameServer" type="string">
+        <desc>Address of the primary DNS server that resolves host names. 
+        Typically allocated automatically so this can be left empty.</desc>
+      </setting>
+    <setting name="IPv4 Secondary Name Server" ref="SecondaryNameServer" type="string">
+        <desc>Address of the secondary DNS server to connect if the primary DNS server is not available.
+        Typically allocated automatically so this can be left empty.</desc>
+      </setting>
+    <setting name="IPv6 Primary Name Server" ref="PrimaryIP6NameServer" type="string">
+        <desc>Address of the primary DNS server that resolves host names.
+        Typically allocated automatically so this can be left empty.</desc>
+      </setting>
+    <setting name="IPv6 Secondary Name Server" ref="SecondaryIP6NameServer" type="string">
+        <desc>Address of the secondary DNS server to connect if the primary DNS server is not available.
+        Typically allocated automatically so this can be left empty.</desc>
+      </setting>
+    <setting name="Proxy Server Address" ref="ProxyServerAddress" type="string">
+        <desc>Address of the HTTP/HTTPS proxy server.</desc>
+      </setting>
+    <setting name="Proxy Port Number" ref="ProxyPortNumber" type="string">
+        <desc>Port number of the HTTP/HTTPS proxy server.</desc>
+      </setting>
+    <setting name="Proxy protocol Name" ref="ProxyProtocolName" type="string">
+        <desc>Name of the protocol for which this proxy can be used. 
+        Typically http or https.</desc>
+      </setting>
+    <setting name="Default Tel Number (Mandatory)" ref="DefaultTelNumber" type="string">
+        <desc>Default telephone number.</desc>
+      </setting>
+    <setting name="Bearer Speed" ref="BearerSpeed" type="selection">
+        <desc>Bearer speed</desc>
+      <option name="Autodetect" value="Autodetect" />
+      <option name="9600" value="9600" />
+      <option name="14400" value="14400" />
+      <option name="19200" value="19200" />
+      <option name="28800" value="28800" />
+      <option name="38400" value="38400" />
+      <option name="43200" value="43200" />
+      <option name="56000" value="56000" />
+      </setting>
+    <setting name="Bearer Call Type Isdn" ref="BearerCallTypeIsdn" type="selection">
+        <desc>Bearer Call Type Isdn</desc>
+      <option name="Analogue" value="Analogue" />
+      <option name="Isdn v110" value="Isdn v110" />
+      <option name="Isdn v120" value="Isdn v120" />
+      </setting>
+    <setting name="Call back Enabled" ref="CallbackEnabled" type="selection">
+        <desc>Is callback enabled.</desc>
+      <option name="Yes" value="Yes" />
+      <option name="No" value="No" />
+      </setting>
+    <setting name="Call back type" ref="CallbackType" type="selection">
+        <desc>Callback type.</desc>
+      <option name="Server Number" value="Server Number" />
+      <option name="Other Number" value="Other Number" />
+      </setting>
+    <setting name="Call back number" ref="CallbackInfo" type="string">
+        <desc>Callback number.</desc>
+      </setting>
+    <setting name="Enable PPP Compression" ref="EnableSWCompression" type="selection">
+        <desc>Enable compression</desc>
+      <option name="Yes" value="Yes" />
+      <option name="No" value="No" />
+      </setting>
+    <setting name="Use Login Script" ref="UseLoginScript" type="selection">
+        <desc>Use login script</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Login Script" ref="LoginScript" type="string">
+        <desc>Login script</desc>
+      </setting>
+    <setting name="Modem init string" ref="InitString" type="string">
+        <desc>Modem init string</desc>
+      </setting>
+    </setting>
+  </feature>
+<feature name="LAN Access Points" ref="LAN_APs">
+    <desc>LAN connection methods</desc>
+  <setting name="LAN" ref="LAN_AP" type="sequence">
+      <setting name="Connection Name" ref="ConnectionName" type="string">
+        <desc>The CM name that is visible to the user.</desc>
+      </setting>
+    <setting name="Connection ID" ref="ConnectionId" type="int">
+        <desc>The CommsDat record id can be manually specified here. If left empty it is allocated automatically.
+      	Note: It needs to be verified carefully that the IDs are globally unique if allocated manually! 
+      	So a good idea is to either specify all the IDs manually or none at all.</desc>
+      </setting>
+    <setting name="Protected" ref="Protected" type="selection">
+        <desc>Defines whether connection method is protected (= cannot be edited by the user).</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Hidden" ref="Hidden" type="selection">
+        <desc>Defines whether connection method is hidden.</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Hidden Agent" ref="HiddenAgent" type="selection">
+        <desc>Connection method is hidden in CConnDlg or not (used to divide MMS and non-MMS CMs).</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Highlighted" ref="Highlighted" type="selection">
+        <desc>Connection method is highlighted or not.</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Seamlessness" ref="Seamlessness" type="selection">
+        <desc>Defines whether an IAP can be roamed to.</desc>
+      <option name="Confirm First" value="ConfirmFirst" />
+      <option name="Show Progress" value="ShowProgress" />
+      </setting>
+    <setting name="WAP Gateway IP" ref="WAPGatewayIP" type="string">
+        <desc>WAP gateway IP address.</desc>
+      </setting>
+    <setting name="Starting Page" ref="StartingPage" type="string">
+        <desc>Start page of the connection method.</desc>
+      </setting>
+    <setting name="WTLS Security" ref="WTLS_Security" type="selection">
+        <desc>Attempts a secure WTLS connection to the gateway.</desc>
+      <option name="On" value="On" />
+      <option name="Off" value="Off" />
+      </setting>
+    <setting name="Connection type" ref="WAP_ConnectionType" type="selection">
+        <desc>Indicates whether a connection-oriented or connectionless API should be used.</desc>
+      <option name="Continuous" value="Continuous" />
+      <option name="Temporary" value="Temporary" />
+      </setting>
+    <setting name="Proxy Server Address" ref="ProxyServerAddress" type="string">
+        <desc>Address of the HTTP/HTTPS proxy server.</desc>
+      </setting>
+    <setting name="Proxy Port Number" ref="ProxyPortNumber" type="string">
+        <desc>Port number of the HTTP/HTTPS proxy server.</desc>
+      </setting>
+    <setting name="Proxy protocol Name" ref="ProxyProtocolName" type="string">
+        <desc>Name of the protocol for which this proxy can be used. 
+        Typically http or https.</desc>
+      </setting>
+    <setting name="LAN If Networks" ref="LanIfNetworks" type="string">
+        <desc>LAN interface networks.</desc>
+      </setting>
+    <setting name="LAN IP Netmask" ref="LanIpNetmask" type="string">
+        <desc>LAN interface netmask.</desc>
+      </setting>
+    <setting name="LAN IP Gateway" ref="LanIpGateway" type="string">
+        <desc>LAN IP Gateway.</desc>
+      </setting>
+    <setting name="IPv4 Phone IP address" ref="PhoneIP" type="string">
+        <desc>IP address of the interface. 
+        Typically allocated automatically so this can be left empty.</desc>
+      </setting>
+    <setting name="IPv4 Primary Name Server" ref="PrimaryNameServer" type="string">
+        <desc>Address of the primary DNS server that resolves host names. 
+        Typically allocated automatically so this can be left empty.</desc>
+      </setting>
+    <setting name="IPv4 Secondary Name Server" ref="SecondaryNameServer" type="string">
+        <desc>Address of the secondary DNS server to connect if the primary DNS server is not available.
+        Typically allocated automatically so this can be left empty.</desc>
+      </setting>
+    <setting name="IPv6 Primary Name Server" ref="PrimaryIP6NameServer" type="string">
+        <desc>Address of the primary DNS server that resolves host names.
+        Typically allocated automatically so this can be left empty.</desc>
+      </setting>
+    <setting name="IPv6 Secondary Name Server" ref="SecondaryIP6NameServer" type="string">
+        <desc>Address of the secondary DNS server to connect if the primary DNS server is not available.
+        Typically allocated automatically so this can be left empty.</desc>
+      </setting>
+    </setting>
+  </feature>
+<feature name="VPN Access Points" ref="VPN_APs">
+    <desc>Virtual Private Network connection methods</desc>
+  <setting name="VPN" ref="VPN_AP" type="sequence">
+      <setting name="Connection Name" ref="ConnectionName" type="string">
+        <desc>The CM name that is visible to the user.</desc>
+      </setting>
+    <setting name="Connection ID" ref="ConnectionId" type="int">
+        <desc>The CommsDat record id can be manually specified here. If left empty it is allocated automatically.
+      	Note: It needs to be verified carefully that the IDs are globally unique if allocated manually! 
+      	So a good idea is to either specify all the IDs manually or none at all.</desc>
+      </setting>
+    <setting name="Protected" ref="Protected" type="selection">
+        <desc>Defines whether connection method is protected (= cannot be edited by the user).</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Hidden" ref="Hidden" type="selection">
+        <desc>Defines whether connection method is hidden.</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Hidden Agent" ref="HiddenAgent" type="selection">
+        <desc>Connection method is hidden in CConnDlg or not (used to divide MMS and non-MMS CMs).</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Highlighted" ref="Highlighted" type="selection">
+        <desc>Connection method is highlighted or not.</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Seamlessness" ref="Seamlessness" type="selection">
+        <desc>Defines whether an IAP can be roamed to.</desc>
+      <option name="Confirm First" value="ConfirmFirst" />
+      <option name="Show Progress" value="ShowProgress" />
+      </setting>
+    <setting name="Proxy Server Address" ref="ProxyServerAddress" type="string">
+        <desc>Address of the HTTP/HTTPS proxy server.</desc>
+      </setting>
+    <setting name="Proxy Port Number" ref="ProxyPortNumber" type="string">
+        <desc>Port number of the HTTP/HTTPS proxy server.</desc>
+      </setting>
+    <setting name="Proxy protocol Name" ref="ProxyProtocolName" type="string">
+        <desc>Name of the protocol for which this proxy can be used. 
+        Typically http or https.</desc>
+      </setting>
+    <setting name="Underlying IAP Name" ref="IAP_Name" type="string">
+        <desc>The network connection provider IAP name.</desc>
+      </setting>
+    <setting name="Service Policy" ref="ServicePolicy" type="string">
+        <desc>Service policy.</desc>
+      </setting>
+    </setting>
+  </feature>
+<feature name="Destination Networks" ref="DNs">
+    <desc>Destination network (SNAP) definitions.</desc>
+  <setting name="DN" ref="DN" type="sequence">
+      <setting name="Name" ref="Name" type="string">
+        <desc>The name that is visible to the user</desc>
+      </setting>
+    <setting name="Destination Network ID" ref="DNId" type="int">
+        <desc>The CommsDat record id can be manually specified here. If left empty it is allocated automatically.
+      	Note: It needs to be verified carefully that the IDs are globally unique if allocated manually! 
+      	So a good idea is to either specify all the IDs manually or none at all.</desc>
+      </setting>
+    <setting name="Metadata" ref="Metadata" type="selection">
+        <desc>Metadata that specifies a few default destination networks that applications can use</desc>
+      <option name="User Defined" value="UserDefined" />
+      <option name="Internet" value="Internet" />
+      <option name="Operator" value="Operator" />
+      <option name="MMS" value="MMS" />
+      <option name="Intranet" value="Intranet" />
+      </setting>
+    <setting name="Protection Level" ref="Protection" type="selection">
+        <desc>DN protection level. Destination contents mean the connection methods inside the destination and their priorities. </desc>
+      <option name="No protection" value="0" />
+      <option name="Destination and contents" value="1" />
+      <option name="Destination" value="2" />
+      </setting>
+    <setting name="Hidden" ref="Hidden" type="selection">
+        <desc>Is DN hidden or not.</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Hidden Agent" ref="HiddenAgent" type="selection">
+        <desc>Is DN hidden in CConnDlg or not</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Highlighted" ref="Highlighted" type="selection">
+        <desc>Is DN highlighted or not.</desc>
+      <option name="No" value="No" />
+      <option name="Yes" value="Yes" />
+      </setting>
+    <setting name="Icon" ref="Icon" type="selection">
+        <desc>Icon to be assigned to DN.</desc>
+      <option name="internet" value="0" />
+      <option name="wap" value="1" />
+      <option name="mms" value="2" />
+      <option name="intranet" value="3" />
+      <option name="operator" value="4" />
+      <option name="icon1" value="5" />
+      <option name="icon2" value="6" />
+      <option name="icon3" value="7" />
+      <option name="icon4" value="8" />
+      <option name="icon5" value="9" />
+      <option name="icon6" value="10" />
+      <option name="default" value="11" />
+      </setting>
+    <setting name="EmbeddedDN" ref="EmbeddedDN" type="string">
+        <desc>
+	    	Name of an embedded DN that is bound to DN.
+	    	</desc>
+      </setting>
+    <setting name="IAP Name 1" ref="IAP" type="string">
+        <desc>
+	    	Name of the Connection Method that is bound to DN.
+	    	</desc>
+      </setting>
+    <setting name="IAP Name 2" ref="IAP2" type="string">
+        <desc>
+	    	Name of the Connection Method that is bound to DN.
+	    	</desc>
+      </setting>
+    <setting name="IAP Name 3" ref="IAP3" type="string">
+        <desc>
+	    	Name of the Connection Method that is bound to DN.
+	    	</desc>
+      </setting>
+    <setting name="IAP Name 4" ref="IAP4" type="string">
+        <desc>
+	    	Name of the Connection Method that is bound to DN.
+	    	</desc>
+      </setting>
+    <setting name="IAP Name 5" ref="IAP5" type="string">
+        <desc>
+	    	Name of the Connection Method that is bound to DN.
+	    	</desc>
+      </setting>
+    <setting name="IAP Name 6" ref="IAP6" type="string">
+        <desc>
+	    	Name of the Connection Method that is bound to DN.
+	    	</desc>
+      </setting>
+    <setting name="IAP Name 7" ref="IAP7" type="string">
+        <desc>
+	    	Name of the Connection Method that is bound to DN.
+	    	</desc>
+      </setting>
+    <setting name="IAP Name 8" ref="IAP8" type="string">
+        <desc>
+	    	Name of the Connection Method that is bound to DN.
+	    	</desc>
+      </setting>
+    <setting name="IAP Name 9" ref="IAP9" type="string">
+        <desc>
+	    	Name of the Connection Method that is bound to DN.
+	    	</desc>
+      </setting>
+    <setting name="IAP Name 10" ref="IAP10" type="string">
+        <desc>
+	    	Name of the Connection Method that is bound to DN.
+	    	</desc>
+      </setting>
+    </setting>
+  </feature>
+<data>
+    <CSD_APs extensionPolicy="append">
+      <CSD_AP extensionPolicy="append" template="true">
+        <Protected extensionPolicy="append">No</Protected>
+      <Hidden extensionPolicy="append">No</Hidden>
+      <HiddenAgent extensionPolicy="append">No</HiddenAgent>
+      <Highlighted extensionPolicy="append">No</Highlighted>
+      <Seamlessness extensionPolicy="append">ConfirmFirst</Seamlessness>
+      <PasswordAuthenticationType extensionPolicy="append">Normal</PasswordAuthenticationType>
+      <WTLS_Security extensionPolicy="append">On</WTLS_Security>
+      <WAP_ConnectionType extensionPolicy="append">Continuous</WAP_ConnectionType>
+      <BearerSpeed extensionPolicy="append">Autodetect</BearerSpeed>
+      <BearerCallTypeIsdn extensionPolicy="append">Analogue</BearerCallTypeIsdn>
+      <CallbackEnabled extensionPolicy="append">Yes</CallbackEnabled>
+      <CallbackType extensionPolicy="append">Server Number</CallbackType>
+      <EnableSWCompression extensionPolicy="append">No</EnableSWCompression>
+      <UseLoginScript extensionPolicy="append">No</UseLoginScript>
+      <ConnectionName extensionPolicy="append" />
+      <ConnectionId extensionPolicy="append" />
+      <UserName extensionPolicy="append" />
+      <PromptPassword extensionPolicy="append" />
+      <Password extensionPolicy="append" />
+      <WAPGatewayIP extensionPolicy="append" />
+      <StartingPage extensionPolicy="append" />
+      <PhoneIP extensionPolicy="append" />
+      <PrimaryNameServer extensionPolicy="append" />
+      <SecondaryNameServer extensionPolicy="append" />
+      <PrimaryIP6NameServer extensionPolicy="append" />
+      <SecondaryIP6NameServer extensionPolicy="append" />
+      <ProxyServerAddress extensionPolicy="append" />
+      <ProxyPortNumber extensionPolicy="append" />
+      <ProxyProtocolName extensionPolicy="append" />
+      <DefaultTelNumber extensionPolicy="append" />
+      <CallbackInfo extensionPolicy="append" />
+      <LoginScript extensionPolicy="append" />
+      <InitString extensionPolicy="append" />
+      </CSD_AP>
+    </CSD_APs>
+  <DNs extensionPolicy="append">
+      <DN extensionPolicy="append" template="true">
+        <Metadata extensionPolicy="append">User Defined</Metadata>
+      <Protection extensionPolicy="append">0</Protection>
+      <Hidden extensionPolicy="append">No</Hidden>
+      <HiddenAgent extensionPolicy="append">No</HiddenAgent>
+      <Highlighted extensionPolicy="append">No</Highlighted>
+      <Icon extensionPolicy="append">11</Icon>
+      <Name extensionPolicy="append" />
+      <DNId extensionPolicy="append" />
+      <EmbeddedDN extensionPolicy="append" />
+      <IAP extensionPolicy="append" />
+      <IAP2 extensionPolicy="append" />
+      <IAP3 extensionPolicy="append" />
+      <IAP4 extensionPolicy="append" />
+      <IAP5 extensionPolicy="append" />
+      <IAP6 extensionPolicy="append" />
+      <IAP7 extensionPolicy="append" />
+      <IAP8 extensionPolicy="append" />
+      <IAP9 extensionPolicy="append" />
+      <IAP10 extensionPolicy="append" />
+      </DN>
+    <DN extensionPolicy="append">
+        <Name extensionPolicy="append">Internet</Name>
+      <DNId extensionPolicy="append">1</DNId>
+      <Metadata extensionPolicy="append">Internet</Metadata>
+      <Protection extensionPolicy="append">2</Protection>
+      <Hidden extensionPolicy="append">No</Hidden>
+      <HiddenAgent extensionPolicy="append">No</HiddenAgent>
+      <Highlighted extensionPolicy="append">Yes</Highlighted>
+      <Icon extensionPolicy="append">0</Icon>
+      <EmbeddedDN extensionPolicy="append" />
+      <IAP extensionPolicy="append" />
+      <IAP2 extensionPolicy="append" />
+      <IAP3 extensionPolicy="append" />
+      <IAP4 extensionPolicy="append" />
+      <IAP5 extensionPolicy="append" />
+      <IAP6 extensionPolicy="append" />
+      <IAP7 extensionPolicy="append" />
+      <IAP8 extensionPolicy="append" />
+      <IAP9 extensionPolicy="append" />
+      <IAP10 extensionPolicy="append" />
+      </DN>
+    <DN extensionPolicy="append">
+        <Name extensionPolicy="append">MMS</Name>
+      <DNId extensionPolicy="append">2</DNId>
+      <Metadata extensionPolicy="append">MMS</Metadata>
+      <Protection extensionPolicy="append">2</Protection>
+      <Hidden extensionPolicy="append">No</Hidden>
+      <HiddenAgent extensionPolicy="append">Yes</HiddenAgent>
+      <Highlighted extensionPolicy="append">No</Highlighted>
+      <Icon extensionPolicy="append">2</Icon>
+      <EmbeddedDN extensionPolicy="append" />
+      <IAP extensionPolicy="append" />
+      <IAP2 extensionPolicy="append" />
+      <IAP3 extensionPolicy="append" />
+      <IAP4 extensionPolicy="append" />
+      <IAP5 extensionPolicy="append" />
+      <IAP6 extensionPolicy="append" />
+      <IAP7 extensionPolicy="append" />
+      <IAP8 extensionPolicy="append" />
+      <IAP9 extensionPolicy="append" />
+      <IAP10 extensionPolicy="append" />
+      </DN>
+    <DN extensionPolicy="append">
+        <Name extensionPolicy="append">Operator</Name>
+      <DNId extensionPolicy="append">3</DNId>
+      <Metadata extensionPolicy="append">Operator</Metadata>
+      <Protection extensionPolicy="append">2</Protection>
+      <Hidden extensionPolicy="append">No</Hidden>
+      <HiddenAgent extensionPolicy="append">No</HiddenAgent>
+      <Highlighted extensionPolicy="append">No</Highlighted>
+      <Icon extensionPolicy="append">4</Icon>
+      <EmbeddedDN extensionPolicy="append" />
+      <IAP extensionPolicy="append" />
+      <IAP2 extensionPolicy="append" />
+      <IAP3 extensionPolicy="append" />
+      <IAP4 extensionPolicy="append" />
+      <IAP5 extensionPolicy="append" />
+      <IAP6 extensionPolicy="append" />
+      <IAP7 extensionPolicy="append" />
+      <IAP8 extensionPolicy="append" />
+      <IAP9 extensionPolicy="append" />
+      <IAP10 extensionPolicy="append" />
+      </DN>
+    </DNs>
+  <Global extensionPolicy="append">
+      <Attachmode extensionPolicy="append">whenavailable</Attachmode>
+    <DefaultDnIcon extensionPolicy="append">11</DefaultDnIcon>
+    <DefaultConnectionType extensionPolicy="append">Ask once</DefaultConnectionType>
+    <DefaultConnectionName extensionPolicy="append" />
+    <DefaultAP extensionPolicy="append" />
+    <WlanUseDefSettings extensionPolicy="append">1</WlanUseDefSettings>
+    <WlanBGScanInterval extensionPolicy="append">0</WlanBGScanInterval>
+    <WlanTxPowerLevel extensionPolicy="append">100</WlanTxPowerLevel>
+    <WlanRadioMeasurements extensionPolicy="append">1</WlanRadioMeasurements>
+    <WlanPowerMode extensionPolicy="append">1</WlanPowerMode>
+    <PriorityLan extensionPolicy="append">0</PriorityLan>
+    <PriorityWlan extensionPolicy="append">1</PriorityWlan>
+    <PriorityPan extensionPolicy="append">2</PriorityPan>
+    <PriorityGprsOut extensionPolicy="append">3</PriorityGprsOut>
+    <PriorityGprsIn extensionPolicy="append">4</PriorityGprsIn>
+    <PriorityCdma2k extensionPolicy="append">5</PriorityCdma2k>
+    <PriorityDialOut extensionPolicy="append">6</PriorityDialOut>
+    <PriorityDialIn extensionPolicy="append">7</PriorityDialIn>
+    <PriorityVpn extensionPolicy="append">253</PriorityVpn>
+    <PriorityMip extensionPolicy="append">254</PriorityMip>
+    <UIPriorityLan extensionPolicy="append">9</UIPriorityLan>
+    <UIPriorityWlan extensionPolicy="append">0</UIPriorityWlan>
+    <UIPriorityPan extensionPolicy="append">8</UIPriorityPan>
+    <UIPriorityGprsOut extensionPolicy="append">1</UIPriorityGprsOut>
+    <UIPriorityGprsIn extensionPolicy="append">2</UIPriorityGprsIn>
+    <UIPriorityCdma2k extensionPolicy="append">3</UIPriorityCdma2k>
+    <UIPriorityDialOut extensionPolicy="append">4</UIPriorityDialOut>
+    <UIPriorityDialIn extensionPolicy="append">5</UIPriorityDialIn>
+    <UIPriorityVpn extensionPolicy="append">6</UIPriorityVpn>
+    <UIPriorityMip extensionPolicy="append">7</UIPriorityMip>
+    <WlanLongRetry extensionPolicy="append">4</WlanLongRetry>
+    <WlanShortRetry extensionPolicy="append">7</WlanShortRetry>
+    <WlanRTS extensionPolicy="append">2347</WlanRTS>
+    <CsdLastSocketActivityTimeout extensionPolicy="append">300</CsdLastSocketActivityTimeout>
+    <CsdLastSessionClosedTimeout extensionPolicy="append">1</CsdLastSessionClosedTimeout>
+    <CsdLastSocketClosedTimeout extensionPolicy="append">300</CsdLastSocketClosedTimeout>
+    <WlanLastSocketActivityTimeout extensionPolicy="append">-1</WlanLastSocketActivityTimeout>
+    <WlanLastSessionClosedTimeout extensionPolicy="append">1</WlanLastSessionClosedTimeout>
+    <WlanLastSocketClosedTimeout extensionPolicy="append">-1</WlanLastSocketClosedTimeout>
+    <GprsLastSocketActivityTimeout extensionPolicy="append">-1</GprsLastSocketActivityTimeout>
+    <GprsLastSessionClosedTimeout extensionPolicy="append">1</GprsLastSessionClosedTimeout>
+    <GprsLastSocketClosedTimeout extensionPolicy="append">-1</GprsLastSocketClosedTimeout>
+    </Global>
+  <APs extensionPolicy="append">
+      <AP extensionPolicy="append" template="true">
+        <Protected extensionPolicy="append">No</Protected>
+      <Hidden extensionPolicy="append">No</Hidden>
+      <HiddenAgent extensionPolicy="append">No</HiddenAgent>
+      <Highlighted extensionPolicy="append">No</Highlighted>
+      <Seamlessness extensionPolicy="append">ConfirmFirst</Seamlessness>
+      <NetworkType extensionPolicy="append">IPv4</NetworkType>
+      <PromptPassword extensionPolicy="append">No</PromptPassword>
+      <PasswordAuthenticationType extensionPolicy="append">Normal</PasswordAuthenticationType>
+      <WTLS_Security extensionPolicy="append">On</WTLS_Security>
+      <WAP_ConnectionType extensionPolicy="append">Continuous</WAP_ConnectionType>
+      <GprsUseEdge extensionPolicy="append">Yes</GprsUseEdge>
+      <ConnectionName extensionPolicy="append" />
+      <ConnectionId extensionPolicy="append" />
+      <GPRS_AP_Name extensionPolicy="append" />
+      <UserName extensionPolicy="append" />
+      <Password extensionPolicy="append" />
+      <WAPGatewayIP extensionPolicy="append" />
+      <StartingPage extensionPolicy="append" />
+      <PhoneIP extensionPolicy="append" />
+      <PrimaryNameServer extensionPolicy="append" />
+      <SecondaryNameServer extensionPolicy="append" />
+      <PrimaryIP6NameServer extensionPolicy="append" />
+      <SecondaryIP6NameServer extensionPolicy="append" />
+      <ProxyServerAddress extensionPolicy="append" />
+      <ProxyPortNumber extensionPolicy="append" />
+      <ProxyProtocolName extensionPolicy="append" />
+      <IspType extensionPolicy="append" />
+      </AP>
+    </APs>
+  <HSCSD_APs extensionPolicy="append">
+      <HSCSD_AP extensionPolicy="append" template="true">
+        <Protected extensionPolicy="append">No</Protected>
+      <Hidden extensionPolicy="append">No</Hidden>
+      <HiddenAgent extensionPolicy="append">No</HiddenAgent>
+      <Highlighted extensionPolicy="append">No</Highlighted>
+      <Seamlessness extensionPolicy="append">ConfirmFirst</Seamlessness>
+      <PromptPassword extensionPolicy="append">No</PromptPassword>
+      <PasswordAuthenticationType extensionPolicy="append">Normal</PasswordAuthenticationType>
+      <WTLS_Security extensionPolicy="append">On</WTLS_Security>
+      <WAP_ConnectionType extensionPolicy="append">Continuous</WAP_ConnectionType>
+      <BearerSpeed extensionPolicy="append">Autodetect</BearerSpeed>
+      <BearerCallTypeIsdn extensionPolicy="append">Analogue</BearerCallTypeIsdn>
+      <CallbackEnabled extensionPolicy="append">Yes</CallbackEnabled>
+      <CallbackType extensionPolicy="append">Server Number</CallbackType>
+      <EnableSWCompression extensionPolicy="append">No</EnableSWCompression>
+      <UseLoginScript extensionPolicy="append">No</UseLoginScript>
+      <ConnectionName extensionPolicy="append" />
+      <ConnectionId extensionPolicy="append" />
+      <UserName extensionPolicy="append" />
+      <Password extensionPolicy="append" />
+      <WAPGatewayIP extensionPolicy="append" />
+      <StartingPage extensionPolicy="append" />
+      <PhoneIP extensionPolicy="append" />
+      <PrimaryNameServer extensionPolicy="append" />
+      <SecondaryNameServer extensionPolicy="append" />
+      <PrimaryIP6NameServer extensionPolicy="append" />
+      <SecondaryIP6NameServer extensionPolicy="append" />
+      <ProxyServerAddress extensionPolicy="append" />
+      <ProxyPortNumber extensionPolicy="append" />
+      <ProxyProtocolName extensionPolicy="append" />
+      <DefaultTelNumber extensionPolicy="append" />
+      <CallbackInfo extensionPolicy="append" />
+      <LoginScript extensionPolicy="append" />
+      <InitString extensionPolicy="append" />
+      </HSCSD_AP>
+    </HSCSD_APs>
+  <LAN_APs extensionPolicy="append">
+      <LAN_AP extensionPolicy="append" template="true">
+        <Protected extensionPolicy="append">No</Protected>
+      <Hidden extensionPolicy="append">No</Hidden>
+      <HiddenAgent extensionPolicy="append">No</HiddenAgent>
+      <Highlighted extensionPolicy="append">No</Highlighted>
+      <Seamlessness extensionPolicy="append">Confirm first</Seamlessness>
+      <WTLS_Security extensionPolicy="append">On</WTLS_Security>
+      <WAP_ConnectionType extensionPolicy="append">Continuous</WAP_ConnectionType>
+      <ConnectionName extensionPolicy="append" />
+      <ConnectionId extensionPolicy="append" />
+      <WAPGatewayIP extensionPolicy="append" />
+      <StartingPage extensionPolicy="append" />
+      <ProxyServerAddress extensionPolicy="append" />
+      <ProxyPortNumber extensionPolicy="append" />
+      <ProxyProtocolName extensionPolicy="append" />
+      <LanIfNetworks extensionPolicy="append" />
+      <LanIpNetmask extensionPolicy="append" />
+      <LanIpGateway extensionPolicy="append" />
+      <PhoneIP extensionPolicy="append" />
+      <PrimaryNameServer extensionPolicy="append" />
+      <SecondaryNameServer extensionPolicy="append" />
+      <PrimaryIP6NameServer extensionPolicy="append" />
+      <SecondaryIP6NameServer extensionPolicy="append" />
+      </LAN_AP>
+    </LAN_APs>
+  <WLAN_APs extensionPolicy="append">
+      <WLAN_AP extensionPolicy="append" template="true">
+        <Protected extensionPolicy="append">No</Protected>
+      <Hidden extensionPolicy="append">No</Hidden>
+      <HiddenAgent extensionPolicy="append">No</HiddenAgent>
+      <Highlighted extensionPolicy="append">No</Highlighted>
+      <Seamlessness extensionPolicy="append">ConfirmFirst</Seamlessness>
+      <NetworkMode extensionPolicy="append">Infrastructure</NetworkMode>
+      <SecurityMode extensionPolicy="append">Open</SecurityMode>
+      <WLANScanSSID extensionPolicy="append">No</WLANScanSSID>
+      <WEPKeyInUse extensionPolicy="append">key1</WEPKeyInUse>
+      <WEPAuthType extensionPolicy="append">Shared</WEPAuthType>
+      <WEPKey1Length extensionPolicy="append">64</WEPKey1Length>
+      <WEPKey1Format extensionPolicy="append">ASCII</WEPKey1Format>
+      <WEPKey2Length extensionPolicy="append">64</WEPKey2Length>
+      <WEPKey2Format extensionPolicy="append">ASCII</WEPKey2Format>
+      <WEPKey3Length extensionPolicy="append">64</WEPKey3Length>
+      <WEPKey3Format extensionPolicy="append">ASCII</WEPKey3Format>
+      <WEPKey4Length extensionPolicy="append">64</WEPKey4Length>
+      <WEPKey4Format extensionPolicy="append">ASCII</WEPKey4Format>
+      <WPAUseOfPresharedKey extensionPolicy="append">No</WPAUseOfPresharedKey>
+      <WPAKeyLength extensionPolicy="append">0</WPAKeyLength>
+      <ConnectionName extensionPolicy="append" />
+      <ConnectionId extensionPolicy="append" />
+      <NetworkName extensionPolicy="append" />
+      <StartingPage extensionPolicy="append" />
+      <PrimaryNameServer extensionPolicy="append" />
+      <SecondaryNameServer extensionPolicy="append" />
+      <PrimaryIP6NameServer extensionPolicy="append" />
+      <SecondaryIP6NameServer extensionPolicy="append" />
+      <WlanIpGatewayAddress extensionPolicy="append" />
+      <WlanIpNetMask extensionPolicy="append" />
+      <ProxyServerAddress extensionPolicy="append" />
+      <ProxyPortNumber extensionPolicy="append" />
+      <ProxyProtocolName extensionPolicy="append" />
+      <WlanChannelId extensionPolicy="append" />
+      <PhoneIP extensionPolicy="append" />
+      <WEPKey1Data extensionPolicy="append" />
+      <WEPKey2Data extensionPolicy="append" />
+      <WEPKey3Data extensionPolicy="append" />
+      <WEPKey4Data extensionPolicy="append" />
+      <WPAPresharedKey extensionPolicy="append" />
+      <WPAListOfEAPs extensionPolicy="append" />
+      <EapGtcUsername extensionPolicy="append" />
+      <EapGtcSessionValidityTime extensionPolicy="append" />
+      <EapGtcEncapsulation extensionPolicy="append" />
+      <EapTlsUsername extensionPolicy="append" />
+      <EapTlsRealm extensionPolicy="append" />
+      <EapTlsVerifyServerRealm extensionPolicy="append" />
+      <EapTlsRequireClientAuth extensionPolicy="append" />
+      <EapTlsSessionValidityTime extensionPolicy="append" />
+      <EapTlsCipherSuites extensionPolicy="append" />
+      <EapTlsUserCertSubjectKeyId extensionPolicy="append" />
+      <EapTlsUserCertIssuerName extensionPolicy="append" />
+      <EapTlsUserCertSerialNumber extensionPolicy="append" />
+      <EapTlsCaCertSubjectKeyId extensionPolicy="append" />
+      <EapTlsCaCertIssuerName extensionPolicy="append" />
+      <EapTlsCaCertSerialNumber extensionPolicy="append" />
+      <EapTlsEncapsulation extensionPolicy="append" />
+      <EapLeapUsername extensionPolicy="append" />
+      <EapLeapPassword extensionPolicy="append" />
+      <EapLeapSessionValidityTime extensionPolicy="append" />
+      <EapSimUsername extensionPolicy="append" />
+      <EapSimRealm extensionPolicy="append" />
+      <EapSimUsePseudonyms extensionPolicy="append" />
+      <EapSimSessionValidityTime extensionPolicy="append" />
+      <EapSimEncapsulation extensionPolicy="append" />
+      <EapTtlsUsername extensionPolicy="append" />
+      <EapTtlsRealm extensionPolicy="append" />
+      <EapTtlsVerifyServerRealm extensionPolicy="append" />
+      <EapTtlsRequireClientAuth extensionPolicy="append" />
+      <EapTtlsSessionValidityTime extensionPolicy="append" />
+      <EapTtlsCipherSuites extensionPolicy="append" />
+      <EapTtlsEncapsulatedTypes extensionPolicy="append" />
+      <EapTtlsUserCertSubjectKeyId extensionPolicy="append" />
+      <EapTtlsUserCertIssuerName extensionPolicy="append" />
+      <EapTtlsUserCertSerialNumber extensionPolicy="append" />
+      <EapTtlsCaCertSubjectKeyId extensionPolicy="append" />
+      <EapTtlsCaCertIssuerName extensionPolicy="append" />
+      <EapTtlsCaCertSerialNumber extensionPolicy="append" />
+      <EapAkaUsername extensionPolicy="append" />
+      <EapAkaRealm extensionPolicy="append" />
+      <EapAkaUsePseudonyms extensionPolicy="append" />
+      <EapAkaSessionValidityTime extensionPolicy="append" />
+      <EapAkaEncapsulation extensionPolicy="append" />
+      <EapPeapUsername extensionPolicy="append" />
+      <EapPeapRealm extensionPolicy="append" />
+      <EapPeapVerifyServerRealm extensionPolicy="append" />
+      <EapPeapRequireClientAuth extensionPolicy="append" />
+      <EapPeapSessionValidityTime extensionPolicy="append" />
+      <EapPeapCipherSuites extensionPolicy="append" />
+      <EapPeapV0Allowed extensionPolicy="append" />
+      <EapPeapV1Allowed extensionPolicy="append" />
+      <EapPeapV2Allowed extensionPolicy="append" />
+      <EapPeapEncapsulatedTypes extensionPolicy="append" />
+      <EapPeapUserCertSubjectKeyId extensionPolicy="append" />
+      <EapPeapUserCertIssuerName extensionPolicy="append" />
+      <EapPeapUserCertSerialNumber extensionPolicy="append" />
+      <EapPeapCaCertSubjectKeyId extensionPolicy="append" />
+      <EapPeapCaCertIssuerName extensionPolicy="append" />
+      <EapPeapCaCertSerialNumber extensionPolicy="append" />
+      <EapMschapv2Username extensionPolicy="append" />
+      <EapMschapv2Password extensionPolicy="append" />
+      <EapMschapv2SessionValidityTime extensionPolicy="append" />
+      <EapMschapv2Encapsulation extensionPolicy="append" />
+      <EapFastUsername extensionPolicy="append" />
+      <EapFastRealm extensionPolicy="append" />
+      <EapFastVerifyServerRealm extensionPolicy="append" />
+      <EapFastRequireClientAuth extensionPolicy="append" />
+      <EapFastSessionValidityTime extensionPolicy="append" />
+      <EapFastCipherSuites extensionPolicy="append" />
+      <EapFastEncapsulatedTypes extensionPolicy="append" />
+      <EapFastAuthProvModeAllowed extensionPolicy="append" />
+      <EapFastUnauthProvModeAllowed extensionPolicy="append" />
+      <EapFastWarnADHPNoPAC extensionPolicy="append" />
+      <EapFastWarnADHPNoMatchingPAC extensionPolicy="append" />
+      <EapFastWarnNotDefaultServer extensionPolicy="append" />
+      <EapFastUserCertSubjectKeyId extensionPolicy="append" />
+      <EapFastUserCertIssuerName extensionPolicy="append" />
+      <EapFastUserCertSerialNumber extensionPolicy="append" />
+      <EapFastCaCertSubjectKeyId extensionPolicy="append" />
+      <EapFastCaCertIssuerName extensionPolicy="append" />
+      <EapFastCaCertSerialNumber extensionPolicy="append" />
+      <Mschapv2Username extensionPolicy="append" />
+      <Mschapv2Password extensionPolicy="append" />
+      <Mschapv2SessionValidityTime extensionPolicy="append" />
+      <Mschapv2Encapsulation extensionPolicy="append" />
+      </WLAN_AP>
+    </WLAN_APs>
+  <VPN_APs extensionPolicy="append">
+      <VPN_AP extensionPolicy="append" template="true">
+        <Protected extensionPolicy="append">No</Protected>
+      <Hidden extensionPolicy="append">No</Hidden>
+      <HiddenAgent extensionPolicy="append">No</HiddenAgent>
+      <Highlighted extensionPolicy="append">No</Highlighted>
+      <Seamlessness extensionPolicy="append">ConfirmFirst</Seamlessness>
+      <ConnectionName extensionPolicy="append" />
+      <ConnectionId extensionPolicy="append" />
+      <ProxyServerAddress extensionPolicy="append" />
+      <ProxyPortNumber extensionPolicy="append" />
+      <ProxyProtocolName extensionPolicy="append" />
+      <IAP_Name extensionPolicy="append" />
+      <ServicePolicy extensionPolicy="append" />
+      </VPN_AP>
+    </VPN_APs>
+  <KCRUidCommsDatCreator extensionPolicy="append">
+      <KCommsDatCreatorStartupStatus extensionPolicy="append">0</KCommsDatCreatorStartupStatus>
+    <KCommsDatCreatorInputFileName extensionPolicy="append">VariantData_commsdat.xml</KCommsDatCreatorInputFileName>
+    </KCRUidCommsDatCreator>
+  </data>
+<rfs>
+    <KCRUidCommsDatCreator extensionPolicy="append">
+      <KCommsDatCreatorStartupStatus extensionPolicy="append">false</KCommsDatCreatorStartupStatus>
+    <KCommsDatCreatorInputFileName extensionPolicy="append">false</KCommsDatCreatorInputFileName>
+    </KCRUidCommsDatCreator>
+  </rfs>
+</configuration>
\ No newline at end of file