<configuration name="Default CommsDat settings" xmlns="http://www.s60.com/xml/confml/2" xmlns:xi="http://www.w3.org/2001/XInclude">

  <feature name="CommsDat generation" ref="KCRUidCommsDatCreator">

    <desc>Used to configure whether CommsDat generation from these settings is enabled.</desc>

  <setting name="CommsDat generation enabled" ref="KCommsDatCreatorInputFileName" type="string">

      <desc>This is the master switch that determines whether CommsDat is created in the first boot 

    	of the device based on Configuration Tool output. Set this to Yes if you are creating variant 

    	and need to configure anything under Default CommsDat settings.</desc>

    <option name="No" value="" />

    <option name="Yes" value="VariantData_commsdat.xml" />

    </setting>

  <setting name="CommsDatCreator startup status flag" ref="KCommsDatCreatorStartupStatus" type="int">

      <desc>Read-only flag that indicates the CommsDatCreator start-up status in runtime.</desc>

    </setting>

  </feature>

<feature name="Global settings" ref="Global">

    <desc>

  	Global networking related settings not tied to individual connection methods.

  	</desc>

  <setting name="Attachmode" ref="Attachmode" type="selection">

      <desc>

      GPRS attach mode (attach when needed/when available).

      </desc>

    <option name="When available" value="whenavailable" />

    <option name="When needed" value="whenneeded" />

    </setting>

  <setting name="Default access point" ref="DefaultAP" type="string">

      <desc>

    	Default GPRS access point. Used when the phone is used as a modem for a PC.

    	The corresponding UI setting is Connection-Packet data-Access point.

    	</desc>

    </setting>

  <setting name="Default icon for DNs" ref="DefaultDnIcon" type="selection">

      <desc>

      Default icon for destination networks.

      </desc>

    <option name="internet" value="0" />

    <option name="wap" value="1" />

    <option name="mms" value="2" />

    <option name="intranet" value="3" />

    <option name="operator" value="4" />

    <option name="icon1" value="5" />

    <option name="icon2" value="6" />

    <option name="icon3" value="7" />

    <option name="icon4" value="8" />

    <option name="icon5" value="9" />

    <option name="icon6" value="10" />

    <option name="default" value="11" />

    </setting>

  <setting name="LAN bearer default priority" ref="PriorityLan" type="string">

      <desc>

    	Default priority for LAN bearer type.

    	</desc>

    </setting>

  <setting name="WLAN bearer default priority" ref="PriorityWlan" type="string">

      <desc>

    	Default priority for WLAN bearer type.

    	</desc>

    </setting>

  <setting name="PAN bearer default priority" ref="PriorityPan" type="string">

      <desc>

    	Default priority for PAN bearer type.

    	</desc>

    </setting>

  <setting name="Outgoing GPRS bearer default priority" ref="PriorityGprsOut" type="string">

      <desc>

    	Default priority for outgoing GPRS bearer type.

    	</desc>

    </setting>

  <setting name="Incoming GPRS bearer default priority" ref="PriorityGprsIn" type="string">

      <desc>

    	Default priority for incoming GPRS bearer type.

    	</desc>

    </setting>

  <setting name="CDMA2000 bearer default priority" ref="PriorityCdma2k" type="string">

      <desc>

    	Default priority for CDMA 2000 bearer type.

    	</desc>

    </setting>

  <setting name="DialOut ISP bearer default priority" ref="PriorityDialOut" type="string">

      <desc>

    	Default priority for outgoing dial bearer type.

    	</desc>

    </setting>

  <setting name="DialIn ISP bearer default priority" ref="PriorityDialIn" type="string">

      <desc>

    	Default priority for incoming dial bearer type.

    	</desc>

    </setting>

  <setting name="VPN bearer default priority" ref="PriorityVpn" type="string">

      <desc>

    	Default priority for VPN bearer type.

    	</desc>

    </setting>

  <setting name="MIP bearer default priority" ref="PriorityMip" type="string">

      <desc>

    	Default priority for MIP bearer type.

    	</desc>

    </setting>

  <setting name="LAN bearer default UI priority" ref="UIPriorityLan" type="string">

      <desc>

    	Default UI priority of LAN connection.

    	</desc>

    </setting>

  <setting name="WLAN bearer default UI priority" ref="UIPriorityWlan" type="string">

      <desc>

    	Default UI priority for WLAN bearer type.

    	</desc>

    </setting>

  <setting name="PAN bearer default UI priority" ref="UIPriorityPan" type="string">

      <desc>

    	Default UI priority for PAN bearer type.

    	</desc>

    </setting>

  <setting name="Outgoing GPRS bearer default UI priority" ref="UIPriorityGprsOut" type="string">

      <desc>

    	Default UI priority for outgoing GPRS bearer type.

    	</desc>

    </setting>

  <setting name="Incoming GPRS bearer default UI priority" ref="UIPriorityGprsIn" type="string">

      <desc>

    	Default UI priority for incoming GPRS bearer type.

    	</desc>

    </setting>

  <setting name="CDMA2000 bearer default UI priority" ref="UIPriorityCdma2k" type="string">

      <desc>

    	Default UI priority for CDMA 2000 bearer type.

    	</desc>

    </setting>

  <setting name="DialOut ISP bearer default UI priority" ref="UIPriorityDialOut" type="string">

      <desc>

    	Default UI priority for outgoing dial bearer type.

    	</desc>

    </setting>

  <setting name="DialIn ISP bearer default UI priority" ref="UIPriorityDialIn" type="string">

      <desc>

    	Default UI priority for incoming dial bearer type.

    	</desc>

    </setting>

  <setting name="VPN bearer default UI priority" ref="UIPriorityVpn" type="string">

      <desc>

    	Default UI priority for VPN bearer type.

    	</desc>

    </setting>

  <setting name="MIP bearer default UI priority" ref="UIPriorityMip" type="string">

      <desc>

    	Default UI priority for MIP bearer type.

    	</desc>

    </setting>

  <setting name="Default connection type" ref="DefaultConnectionType" type="selection">

      <desc>

      Specifies how the applications' default connection is specified.

      </desc>

    <option name="Ask once" value="Ask once" />

    <option name="Always ask" value="Always ask" />

    <option name="Destination" value="Destination" />

    <option name="Connection method" value="Connection method" />

    </setting>

  <setting name="Default connection name" ref="DefaultConnectionName" type="string">

      <desc>

    	The name of the default connection (connection method or destination network). 

    	Default connection type parameter needs to be set accordingly.

    	</desc>

    </setting>

  <setting name="GPRS last socket activity timeout" ref="GprsLastSocketActivityTimeout" type="int">

      <desc>

    	For GPRS the time (in seconds) to stay online when all socket activity has ceased. -1 for unlimited time.

    	Leave empty to use the product default value.

    	</desc>

    </setting>

  <setting name="GPRS last session closed timeout" ref="GprsLastSessionClosedTimeout" type="int">

      <desc>

    	For GPRS the time (in seconds) to stay online when session has closed. -1 for unlimited time.

    	Leave empty to use the product default value.

    	</desc>

    </setting>

  <setting name="GPRS last socket closed timeout" ref="GprsLastSocketClosedTimeout" type="int">

      <desc>

    	For GPRS the time (in seconds) to stay online when socket has closed. -1 for unlimited time.

    	Leave empty to use the product default value.

    	</desc>

    </setting>

  <setting name="CSD last socket activity timeout" ref="CsdLastSocketActivityTimeout" type="int">

      <desc>

    	For CSD the time (in seconds) to stay online when all socket activity has ceased. -1 for unlimited time.

    	Leave empty to use the product default value.

    	</desc>

    </setting>

  <setting name="CSD last session closed timeout" ref="CsdLastSessionClosedTimeout" type="int">

      <desc>

    	For CSD the time (in seconds) to stay online when all socket activity has ceased. -1 for unlimited time.

    	Leave empty to use the product default value.

    	</desc>

    </setting>

  <setting name="CSD last socket closed timeout" ref="CsdLastSocketClosedTimeout" type="int">

      <desc>

    	For CSD the time (in seconds) to stay online when all socket activity has ceased. -1 for unlimited time.

    	Leave empty to use the product default value.

    	</desc>

    </setting>

  <setting name="WLAN last socket activity timeout" ref="WlanLastSocketActivityTimeout" type="int">

      <desc>

    	For WLAN the time (in seconds) to stay online when all socket activity has ceased. -1 for unlimited time.

    	Leave empty to use the product default value.

    	</desc>

    </setting>

  <setting name="WLAN last session closed timeout" ref="WlanLastSessionClosedTimeout" type="int">

      <desc>

    	For WLAN the time (in seconds) to stay online when all socket activity has ceased. -1 for unlimited time.

    	Leave empty to use the product default value.

    	</desc>

    </setting>

  <setting name="WLAN last socket closed timeout" ref="WlanLastSocketClosedTimeout" type="int">

      <desc>

    	For WLAN the time (in seconds) to stay online when all socket activity has ceased. -1 for unlimited time.

    	Leave empty to use the product default value.

    	</desc>

    </setting>

  <setting name="WLAN background scan interval" ref="WlanBGScanInterval" type="selection">

      <desc>

      How often WLAN networks are scanned when idle.

      </desc>

    <option name="Never" value="0" />

    <option name="Every minute" value="60" />

    <option name="Every 2 minutes" value="120" />

    <option name="Every 5 minutes" value="300" />

    <option name="Every 10 minutes" value="600" />

    </setting>

  <setting name="WLAN use default settings" ref="WlanUseDefSettings" type="selection">

      <desc>Defines whether default values are being used for the advanced WLAN settings (recommended). </desc>

    <option name="No" value="0" />

    <option name="Yes" value="1" />

    </setting>

  <setting name="WLAN long retry limit" ref="WlanLongRetry" type="int">

      <desc>Defines how many times packets bigger than RTS Threshold are been resent.</desc>

    </setting>

  <setting name="WLAN short retry limit" ref="WlanShortRetry" type="int">

      <desc>Defines how many times packets smaller than RTS Threshold are been resent.</desc>

    </setting>

  <setting name="WLAN RTS threshold" ref="WlanRTS" type="int">

      <desc>Minimum size of a packet for which CTS/RTS handshake has been used.</desc>

    </setting>

  <setting name="WLAN TX power level" ref="WlanTxPowerLevel" type="selection">

      <desc>Transmission power level in use. In mWs. 4, 10 or 100 mW.</desc>

    <option name="100 mW" value="100" />

    <option name="10 mW" value="10" />

    <option name="4 mW" value="4" />

    </setting>

  <setting name="WLAN allow radio measurements" ref="WlanRadioMeasurements" type="selection">

      <desc>Defines whether the CCX radio measurements are allowed.</desc>

    <option name="No" value="0" />

    <option name="Yes" value="1" />

    </setting>

  <setting name="WLAN power save" ref="WlanPowerMode" type="selection">

      <desc>Defines whether power saving methods are active. Disabling WLAN

      power save might increase interoperability but will dramatically shorten battery life.</desc>

    <option name="On" value="1" />

    <option name="Off" value="0" />

    </setting>

  </feature>

<feature name="GPRS Access Points" ref="APs">

    <desc>GPRS connection method (CM) definitions</desc>

  <setting name="GPRS" ref="AP" type="sequence">

      <setting name="Connection Name" ref="ConnectionName" type="string">

        <desc>The CM name that is visible to the user.</desc>

      </setting>

    <setting name="Connection ID" ref="ConnectionId" type="int">

        <desc>The CommsDat record id can be manually specified here. If left empty it is allocated automatically.

      	Note: It needs to be verified carefully that the IDs are globally unique if allocated manually! 

      	So a good idea is to either specify all the IDs manually or none at all.</desc>

      </setting>

    <setting name="Protected" ref="Protected" type="selection">

        <desc>Defines whether connection method is protected (= cannot be edited by the user).</desc>

      <option name="No" value="No" />

      <option name="Yes" value="Yes" />

      </setting>

    <setting name="Hidden" ref="Hidden" type="selection">

        <desc>Defines whether connection method is hidden.</desc>

      <option name="No" value="No" />

      <option name="Yes" value="Yes" />

      </setting>

    <setting name="Hidden Agent" ref="HiddenAgent" type="selection">

        <desc>Connection method is hidden in CConnDlg or not (used to divide MMS and non-MMS CMs).</desc>

      <option name="No" value="No" />

      <option name="Yes" value="Yes" />

      </setting>

    <setting name="Highlighted" ref="Highlighted" type="selection">

        <desc>Connection method is highlighted or not.</desc>

      <option name="No" value="No" />

      <option name="Yes" value="Yes" />

      </setting>

    <setting name="Seamlessness" ref="Seamlessness" type="selection">

        <desc>Defines whether an IAP can be roamed to.</desc>

      <option name="Confirm First" value="ConfirmFirst" />

      <option name="Show Progress" value="ShowProgress" />

      </setting>

    <setting name="Network type" ref="NetworkType" type="selection">

        <desc>Addressing that the network uses.</desc>

      <option name="IPv4" value="IPv4" />

      <option name="IPv6" value="IPv6" />

      </setting>

    <setting name="GPRS Access Point Name" ref="GPRS_AP_Name" type="string">

        <desc>The access point name for this GPRS connection</desc>

      </setting>

    <setting name="User Name" ref="UserName" type="string">

        <desc>User name</desc>

      </setting>

    <setting name="Prompt Password" ref="PromptPassword" type="selection">

        <desc>Prompt password at connection time.</desc>

      <option name="No" value="No" />

      <option name="Yes" value="Yes" />

      </setting>

    <setting name="Password" ref="Password" type="string">

        <desc>Password.</desc>

      </setting>

    <setting name="Password authentication type" ref="PasswordAuthenticationType" type="selection">

        <desc>Password authentication method.</desc>

      <option name="Normal" value="Normal" />

      <option name="Secure" value="Secure" />

      </setting>

    <setting name="WAP Gateway IP" ref="WAPGatewayIP" type="string">

        <desc>WAP gateway IP address.</desc>

      </setting>

    <setting name="Starting Page" ref="StartingPage" type="string">

        <desc>Start page of the connection method. In URL format.</desc>

      </setting>

    <setting name="WTLS Security" ref="WTLS_Security" type="selection">

        <desc>Attempts a secure WTLS connection to the gateway.</desc>

      <option name="On" value="On" />

      <option name="Off" value="Off" />

      </setting>

    <setting name="Connection type" ref="WAP_ConnectionType" type="selection">

        <desc>Indicates whether a connection-oriented or connectionless API should be used.</desc>

      <option name="Continuous" value="Continuous" />

      <option name="Temporary" value="Temporary" />

      </setting>

    <setting name="IPv4 Phone IP address" ref="PhoneIP" type="string">

        <desc>IP address of the interface. 

        Typically allocated automatically so this can be left empty.</desc>

      </setting>

    <setting name="IPv4 Primary Name Server" ref="PrimaryNameServer" type="string">

        <desc>Address of the primary DNS server that resolves host names. 

        Typically allocated automatically so this can be left empty.</desc>

      </setting>

    <setting name="IPv4 Secondary Name Server" ref="SecondaryNameServer" type="string">

        <desc>Address of the secondary DNS server to connect if the primary DNS server is not available.

        Typically allocated automatically so this can be left empty.</desc>

      </setting>

    <setting name="IPv6 Primary Name Server" ref="PrimaryIP6NameServer" type="string">

        <desc>Address of the primary DNS server that resolves host names.

        Typically allocated automatically so this can be left empty.</desc>

      </setting>

    <setting name="IPv6 Secondary Name Server" ref="SecondaryIP6NameServer" type="string">

        <desc>Address of the secondary DNS server to connect if the primary DNS server is not available.

        Typically allocated automatically so this can be left empty.</desc>

      </setting>

    <setting name="Proxy Server Address" ref="ProxyServerAddress" type="string">

        <desc>Address of the HTTP/HTTPS proxy server.</desc>

      </setting>

    <setting name="Proxy Port Number" ref="ProxyPortNumber" type="string">

        <desc>Port number of the HTTP/HTTPS proxy server.</desc>

      </setting>

    <setting name="Proxy protocol Name" ref="ProxyProtocolName" type="string">

        <desc>Name of the protocol for which this proxy can be used. 

        Typically http or https.</desc>

      </setting>

    <setting name="GPRS Use EDGE" ref="GprsUseEdge" type="selection">

        <desc>Allow EDGE usage.</desc>

      <option name="Yes" value="Yes" />

      <option name="No" value="No" />

      </setting>

    <setting name="ISP Type" ref="IspType" type="selection">

        <desc>Specifies the service provider type. Used when filtering connection methods for certain purpose.</desc>

      <option name="Internet" value="0" />

      <option name="WAP" value="1" />

      <option name="Both" value="2" />

      </setting>

    </setting>

  </feature>

<feature name="WLAN Access Points" ref="WLAN_APs">

    <desc>WLAN connection method (CM) definitions</desc>

  <setting name="WLAN" ref="WLAN_AP" type="sequence">

      <setting name="Connection Name" ref="ConnectionName" type="string">

        <desc>The CM name that is visible to the user.</desc>

      </setting>

    <setting name="Connection ID" ref="ConnectionId" type="int">

        <desc>The CommsDat record id can be manually specified here. If left empty it is allocated automatically.

      	Note: It needs to be verified carefully that the IDs are globally unique if allocated manually! 

      	So a good idea is to either specify all the IDs manually or none at all.</desc>

      </setting>

    <setting name="Protected" ref="Protected" type="selection">

        <desc>Defines whether connection method is protected (= cannot be edited by the user).</desc>

      <option name="No" value="No" />

      <option name="Yes" value="Yes" />

      </setting>

    <setting name="Hidden" ref="Hidden" type="selection">

        <desc>Defines whether connection method is hidden.</desc>

      <option name="No" value="No" />

      <option name="Yes" value="Yes" />

      </setting>

    <setting name="Hidden Agent" ref="HiddenAgent" type="selection">

        <desc>Connection method is hidden in CConnDlg or not (used to divide MMS and non-MMS CMs).</desc>

      <option name="No" value="No" />

      <option name="Yes" value="Yes" />

      </setting>

    <setting name="Highlighted" ref="Highlighted" type="selection">

        <desc>Connection method is highlighted or not.</desc>

      <option name="No" value="No" />

      <option name="Yes" value="Yes" />

      </setting>

    <setting name="Seamlessness" ref="Seamlessness" type="selection">

        <desc>Defines whether an IAP can be roamed to.</desc>

      <option name="Confirm First" value="ConfirmFirst" />

      <option name="Show Progress" value="ShowProgress" />

      </setting>

    <setting name="Network Name" ref="NetworkName" type="string">

        <desc>Service set identifier (SSID) of the primary WLAN network.</desc>

      </setting>

    <setting name="Starting Page" ref="StartingPage" type="string">

        <desc>Start page of the connection method. In URL format.</desc>

      </setting>

    <setting name="Network Mode" ref="NetworkMode" type="string">

        <desc>Determines the network infrastructure. 

        If there is a WLAN access point in the network then this should be Infrastructure.</desc>

      <option name="Infrastructure" value="Infrastructure" />

      <option name="Ad-hoc" value="Ad-hoc" />

      </setting>

    <setting name="Security Mode" ref="SecurityMode" type="selection">

        <desc>Security mode of the WLAN network.</desc>

      <option name="Open" value="Open" />

      <option name="WEP" value="WEP" />

      <option name="802.1x" value="802.1x" />

      <option name="WPA" value="WPA" />

      <option name="WPA2" value="WPA2" />

      </setting>

    <setting name="IPv4 Primary Name Server" ref="PrimaryNameServer" type="string">

        <desc>Address of the primary DNS server that resolves host names.

        Typically allocated automatically in which case this should be empty.</desc>

      </setting>

    <setting name="IPv4 Secondary Name Server" ref="SecondaryNameServer" type="string">

        <desc>Address of the secondary DNS server to connect if the primary DNS server is not available.

        Typically allocated automatically in which case this should be empty.</desc>

      </setting>

    <setting name="IPv6 Primary Name Server" ref="PrimaryIP6NameServer" type="string">

        <desc>Address of the primary DNS server that resolves host names.

        Typically allocated automatically in which case this should be empty.</desc>

      </setting>

    <setting name="IPv6 Secondary Name Server" ref="SecondaryIP6NameServer" type="string">

        <desc>Address of the secondary DNS server to connect if the primary DNS server is not available.

        Typically allocated automatically in which case this should be empty.</desc>

      </setting>

    <setting name="WLAN IP Gateway Address" ref="WlanIpGatewayAddress" type="string">

        <desc>The gateway IP address. 

      Typically allocated automatically in which case this should be empty.</desc>

      </setting>

    <setting name="Wlan IP Net Mask" ref="WlanIpNetMask" type="string">

        <desc>Network mask. Typically allocated automatically in which case this should be empty.</desc>

      </setting>

    <setting name="Proxy Server Address" ref="ProxyServerAddress" type="string">

        <desc>Address of the HTTP/HTTPS proxy server.</desc>

      </setting>

    <setting name="Proxy Port Number" ref="ProxyPortNumber" type="string">

        <desc>Port number of the HTTP/HTTPS proxy server.</desc>

      </setting>

    <setting name="Proxy protocol Name" ref="ProxyProtocolName" type="string">

        <desc>Name of the protocol for which this proxy can be used. 

        Typically http or https.</desc>

      </setting>

    <setting name="WLAN Scan SSID" ref="WLANScanSSID" type="selection">

        <desc>Defines whether the SSID should be actively scanned. 

        This is needed if the SSID is hidden (not broadcasted by the AP) </desc>

      <option name="No" value="No" />

      <option name="Yes" value="Yes" />

      </setting>

    <setting name="WLAN Channel ID" ref="WlanChannelId" type="string">

        <desc>

      	802.11 Channel ID (1-14). Used only when connecting/setting up adhoc network.

      	</desc>

      </setting>

    <setting name="IPv4 Phone IP address" ref="PhoneIP" type="string">

        <desc>IP address of the interface.

        Typically allocated automatically so this can be left empty.</desc>

      </setting>

    <setting name="WEP Key In Use" ref="WEPKeyInUse" type="selection">

        <desc>Index of default WEP key. Used only when security mode is WEP.</desc>

      <option name="key1" value="key1" />

      <option name="key2" value="key2" />

      <option name="key3" value="key3" />

      <option name="key4" value="key4" />

      </setting>

    <setting name="WEP Auth Type" ref="WEPAuthType" type="selection">

        <desc>WEP authentication mode. Only used when security mode is WEP.</desc>

      <option name="Shared" value="Shared" />

      <option name="Open" value="Open" />

      </setting>

    <setting name="WEP Key1 Length" ref="WEPKey1Length" type="selection">

        <desc>WEP key length in bits.</desc>

      <option name="64" value="64" />

      <option name="128" value="128" />

      <option name="256" value="256" />

      </setting>

    <setting name="WEP Key1 Format" ref="WEPKey1Format" type="selection">

        <desc>WEP key format.</desc>

      <option name="ASCII" value="ASCII" />

      <option name="Hexadecimal" value="Hexadecimal" />

      </setting>

    <setting name="WEP Key1 Data" ref="WEPKey1Data" type="string">

        <desc>WEP key data (in format specified by corresponding WEP key format field).</desc>

      </setting>

    <setting name="WEP Key2 Length" ref="WEPKey2Length" type="selection">

        <desc>WEP key length in bits.</desc>

      <option name="64" value="64" />

      <option name="128" value="128" />

      <option name="256" value="256" />

      </setting>

    <setting name="WEP Key2 Format" ref="WEPKey2Format" type="selection">

        <desc>WEP key format.</desc>

      <option name="ASCII" value="ASCII" />

      <option name="Hexadecimal" value="Hexadecimal" />

      </setting>

    <setting name="WEP Key2 Data" ref="WEPKey2Data" type="string">

        <desc>WEP key data (in format specified by corresponding WEP key format field).</desc>

      </setting>

    <setting name="WEP Key3 Length" ref="WEPKey3Length" type="selection">

        <desc>WEP key length in bits.</desc>

      <option name="64" value="64" />

      <option name="128" value="128" />

      <option name="256" value="256" />

      </setting>

    <setting name="WEP Key3 Format" ref="WEPKey3Format" type="selection">