version 8.4.001

===============

Released by Lorence Wang, 26/04/2010

	1) DPDEF145375 RCOMP can not parse data passed to its STDIN correctly 

version 8.3.001

===============

Released by Zheng Shen, 16/03/2010

	1) DPDEF145001  RCOMP failed if uidcrc is not located in the same directory as it is

version 8.3.000

===============

Released by Zheng Shen, 22/02/2010

	1) DPDEF144562	Build Tools cannot be built in Linux

version 8.2.008

===============

Released by Marvin Shi, 25/01/2010

	1) DPDEF143586 Add -o2 optimization to rcomp 

version 8.2.007

===============

Released by Marvin Shi, 15/01/2010

	1) DPDEF143836 rcomp produces error messages which should be warning messages 

Version 8.2.006

===============

Released by Zheng Shen, 10/12/2009

	1) DPDEF143045 rcomp produces a warning 'Cannot convert "1.0" 

Version 8.2.005

===============

Released by Jason Cui, 31/7/2009 (did not clear build number, should be done by next feature deliery)

  1) SITK v1.4, GT0499, MS3.5.3, DS.1772 PREQ2471: RIT: Resource compiler (RComp) must support characters outside of the BMP 

Version 8.1.005

===============

Released by KunalM, 06/03/2007

	1) RCOMP ported to the TOOLS2 platform, under PREQ1182, MS3.6.2

Version 8.00.002

================

Released by AndrewR, 3/3/2005

	1) DEFECT FIX: DEF055559 - Problems building rcomp in VC6 IDE

Version 8.00.001

================

Released by AndrewR, 7/2/2005

	1) DEFECT FIX: DEF054981 - tools_rcomp component is updated every day

Version 8.00.000

================

Released by AndrewR, 4/2/2005

	1) Fixed DEF054617 - rcomp doesn't build from source

	2) Fixed INC049059 - incorrect line number for error reported by rcomp when building \s60\gs

Version 7.01.009

============

Released by KuldipN, 22/07/2004

	Add UID2 and UID3 keywords to RCOMP 

	(CR HBRT-5YJJ9C Specifying UID2 and UID3 in RSS files)

Version 7.01.008

============

Released by DuskoJ, 10/07/2003

	1) Fixed DEF022269  Resource value is read incorrectly

	2) Fixed INC036025  RCOMP chinese resource complation problem 

Version 7.01.007

============

Released by Jon Chatten, 03/06/2003

	1) Fixed "DEF025433 RComp core dumps on certain resource files"

	2) Adjusted version number in release.txt to match binary.

Version 7.06

============

Released by Dusko Jahora, 03/06/2003

	1) Reverted fix for DEF022269

Version 7.05

============

Released by Dusko Jahora, 02/06/2003

1)	DuskoJ

	1)	Changes to RCOMP whihch are part of CR PCHY-5L3RDW 

		"Typhoon must support 16bpp colour".

	2)	Fixed DEF022269  Resource value is read incorrectly

		(this fix was not submitted on 09/05/2003 because of 

		 an integration error)

Version 7.04

============

Released by Dusko Jahora, 09/05/2003

1)	DuskoJ

	1)	Fixed DEF022269  Resource value is read incorrectly

Version 7.03

============

Released by Dusko Jahora, April 2003

	1)	Fixed defect DEF017151 "RCOMP should be upgraded to support files with UTF8 

		signature".

1)	William

	1)	Fixed defect ROS-58VCX8 "RCOMP doesn't allow + in filenames" by removing

		the unnecessary validation of the filenames left by the C++ preprocessor.

	2)	Fixed defect RED-5ACK5F "Resource compiler creates nothing for empty and bad 

		counted byte arrays"

2)	Dusko

	1)	Fixed defect ROS-5B7MHW "RCOMP fails to handle boundary values correctly

		for WORD data type"

NB. The handling of LABEL suggests that it would be pretty easy to add rls_string support

into the compiler directly.

Version 7.01

============

Released by Jon Chatten, February 2002

Fixed defect ROS-56PHFA - Replaced system() call to uidcrc.exe with a call to _spawnlp -

this addresses the IDE-hanging issue when epocrc.pl is integrated as a plug-in with the CW

IDE on Windows 98.

Removed attempt to absolutely identify uidcrc.exe - this is no longer required as the CW RCOMP/EPOCRC.PL

plug-in now sets the PATH before invoking the command line tools.

1)	William

	1)	Fixed defect ROS-55KJ4U "RCOMP fails if epoc32\tools not on the path"

Version 7.00

============

Released by David Batchelor (November/December 2001)

The format of resource files changes as follows:

- The initial 2 two-byte values are removed as they are completely redundant. (All the information

  they provide can be derived from the last 2 bytes of the file combined with the size of the

  file.)

- Resource files now have a standard 4-byte checked-UID field at the start. The first UID is

  0x101f4a6b, to indicate that the resource file potentially contains Unicode compressed according

  to the "Standard Compression Scheme for Unicode" (see

  http://www.unicode.org/unicode/reports/tr6/tr6-3.2.html). The second and third UIDs may be

  specified on the command-line by using an optional parameter of the form

  "-{0x12345678,0x9abcdef0}" (without the quotation marks). If "*" is used as the last UID, e.g.

  "-{0x600ddea1,*}", then the resource file's "offset" (i.e. the 20-bit number generated from the

  resource file's "NAME") is used as the last UID.

- The UID field is immediately followed by a bit-array, one bit for each resource in the resource

  file, where each bit indicates whether the corresponding resource contains compressed Unicode.

  The bit field is padded up to a multiple of 8-bits (if necessary) with zero bits.

- Each resource which contains compressed Unicode consists of a series of "runs" preceded by a 1

  or 2-byte run-length (1 byte if the run is <128 bytes, else 2 bytes). The run-length value does

  not include itself in the byte count that it holds. The first run, the third run, the fifth run

  etc contain compressed Unicode. The second run, the fourth run, the sixth run etc contain other

  stuff. As the protocol defines that the first run is compressed Unicode, this run may obviously

  be of zero length - no subsequent run in that resource may be of zero length.

- Rcomp only uses compressed Unicode for text fields if it yields any benefit (i.e. only if it

  actually makes the output file smaller).

- The changes are completely transparent for code that reads resources.

Version 6.03

============

Released by William Roberts, 30-Jul-2001

Fix defect EXT-4YSCUV "Resource compiler corrupts long strings"

Handle very long C++ comments, which previously caused a "token buffer overflow" message from the

lexical analyser. Avoid overruning the buffer for literals by using a CHECK_APPEND() macro which

discards characters rather than run off the end, giving errors like

<empty>(5) : string too long - 1 ignored

<empty>(5) : string too long - 2 ignored

Avoid overflowing the Value array in string expressions by checking the new length before

agreeing to concatenate the strings. Ultimately it would be best to replace Value[] with 

a char* which has been created with strdup() and can therefore be realloc'd to grow the string.

Fix defect ARG-4TZF7J "RCOMP needs warning waivers registered with SI"

Removed all warnings in tools rel build - some tools deb warnings will appear in rcomp.cpp 

because of problems in the mks\etc\yyparse.cpp file, but I didn't want to hide related problems 

in any new Symbian code we might add. 

Improve the -v output to show the primitive types being emitted, and to dump the IndexTable as hex

offsets followed by the resource name, e.g.

    IndexTable

    IndexTableItem 4	<empty>

    IndexTableItem c	r_eikserv_panic_dialog

    IndexTableItem b8	r_eiksrv_oom_event_top

    IndexTableItem e4	r_eiksrv_oom_event_bot

    IndexTableItem 144	r_eikserv_replace_main_batteries

    IndexTableItem 170	r_eikserv_replace_backup_battery

and 

    ResourceHeader          r_eiksrv_tasklist_dialog

    ++ResourceItemArray

    SimpleResourceItem [Long flags]  9

    SimpleResourceItem [LText16 title]  

    SimpleResourceItem [LLink pages]  

    SimpleResourceItem [LLink buttons]  

    StructArrayResourceItem (Level 0) [items]  

    ArrayLength [Word] 1

    ----------------------

    --ResourceItemArrayArray

    ++ResourceItemArray

    SimpleResourceItem [Word type]  1001

    SimpleResourceItem [LText16 prompt]  

    SimpleResourceItem [Word id]  1

    SimpleResourceItem [Long itemflags]  0

    StructTypeResourceItem (Level 0) [control]  

    ----------------------

    ++ResourceItemArray

    SimpleResourceItem [Byte version]  0

    SimpleResourceItem [Word flags]  0

    SimpleResourceItem [Word height]  8

    SimpleResourceItem [Word width]  20

    SimpleResourceItem [LLink array_id]  

    ----------------------

    SimpleResourceItem [LText16 trailer]  

    ----------------------

Together these changes should make it significantly easier to step through the binary image of a

resource and work out which element has changed unexpectedly.

Version 6.02

============

Released by William Roberts, 15-Feb-2001

Fix awful defect in version 6.01, which caused negative integer constants to be written to the file as -1.

When testing with LOCKIT, RCOMP developer should be aware that the version of RCOMP.EXE used by lockit 

is kept in \lockit\tools, not \epoc32\tools.

Version 6.01

============

Released by William Roberts, 14-Feb-2001

Redefined character literals ('x') to be effectively strings so that they can contain UTF8 encodings

for interesting characters. This is handled using the same lexical rules as string literals, so

the limited escape processing is also supported. The introduction of strings surrounded by single-quotes

means that the sequence \' is now accepted as standing for '.

If the character literal string decodes to more than one Unicode character, a warning is given and the

rest of the string is ignored. The prevailing source character encoding is used, but there is no support

narrow character literals in the difficult part of the CP1252 range: the interpretation of the literal

is always "the Unicode encoding for the first character of the string". For example, even in a 

CP1252 source file building a narrow resource, a literal containing the Euro symbol will be interpreted 

as 0x20ac, not 0x80.

LTEXT strings are now checked to ensure that they are less than 256 characters in length.

The NAME statement can now take a string literal or a label, instead of the previous behaviour where the

lexical analyser handled the following word differently. Any RSS file which used a keyword as a name,

for example WORD.RSS, will need to be changed to specify the name as a literal: the preferred syntax

is to use string literals in all cases.

Version 3.18

============

Released by William Roberts, 05-Aug-1999.

Requires BAFL 092.

Changed the handling of Unicode string resources (TEXT16 and LTEXT16) to ensure that the

Unicode characters are aligned to a multiple of 2 bytes when the resource is used.

Resources are never used in place: instead RResourceFile::AllocReadLC creates an HBufC8 to hold a

copy of the data. This means that rather than aligning from the start of the entire resource file,

instead we have to align to the start of the individual resource, because the data in an HBufC8 

always starts at an aligned address.

Added RCBinaryStream::Align(int nBytes) and RCBinaryStream::SetAlignBase() to support the 

generation of the necessary padding, and call them from suitable places in RCOSTRM.CPP.

Also added code to add 1 to the offset of the end of the table of resource offsets: this is tested

in BAFL as a marker to indicate the new format of resource file.

Added a /verbose flag to core.cmd which invokes RCOMP with -v.

Added #pragma warning( disable : 4710 ) in a couple of places to cut down on the number of

unnecessary and useless "warnings".

Regenerated the test resources.

Version 3.17

============

Released by William Roberts, 25-Jun-1999.

Fixed defect where embedded Unicode characters could cause BUF<x> strings to fail a length check.

Updated test code include a check for this.

Added more stuff for the Engineering Automated Build.

Version 3.16

============

Released by Pute, 9-Jun-1999.  Based on work by William Roberts,

26-May-1999 described in the "William's notes" section below.

Character sets

--------------

We are moving towards a specific principle of character sets for RCOMP.

Previously, the character set used by RCOMP was not well defined, later we

added the CHARACTER_SET identifier.  This implied that any specific values

inserted into strings in <n> format would be in the character set of the

source.

In this design RCOMP will have trouble handling multibyte encodings like

Shift-JIS because the tools it relies upon, LEX and YACC, are based on

single-octet encodings only. Sometimes a multibyte encoding will produce

artefacts that appear to be syntax elements such as double quote marks.

In future the intention is that RCOMP uses UTF-8 encoding internally,

provided by a pre-processing phase.  This release is an interim step.

In this release, when explicit values are inserted in text strings, they

are interpreted as Unicode values and converted to UTF-8.  To retain

backward compatibility with CP1252 source, values 80-9F are also permitted

and these will be mapped to Unicode as before when the source character set

is defined to be CP1252.  The use of explicit values 80-9F is deprecated

however.

The default input character set is CP1252.  Previously, the default

character set was "unknown".  This possibility is no-longer supported.

This was also contrary to documentation.

Details:

Test command procedure updated and enhanced.

Test comparison files TUTEXT8.RSC and TUTEXT16.RSC have been updated to

allow for the introduction of the extra characters in the CP1252 character

set.  (128 used to be "not used" and is now the euro sign)

Note that compilation warning messages about deprecated characters will

appear durng this test.

A new test source file TWTEXT.RSS and associated reference binaries have

been added to the test suite to demonstrate explicit use of values >255.

William's notes (edited by Pute):

---------------

Defined a new "character set" called UTF8, which supports the UTF8

encoding of Unicode strings. 

This actually allows the whole resource source file to be entered as

UTF8 if required.  However the default charset remains CP1252.

Arranged to support embedded Unicode characters constructed using the

<xxx> notation, to support the use of 0x07ED as the end-of-paragraph

marker (see ETEXT 120). This exploits the UTF8 support by inserting the

appropriate UTF8 sequence into the 8-bit data.

The embedded Unicode characters are also supported in the CP1252

character set, with internal use of 0x81 as an "escape" character

indicating that the following bytes are a UTF8 encoded character. This

allows existing CP1252 resource source files to be used with the new

ETEXT.

Added the Euro and the Z caron encodings to the cp1252_exceptions table.

Only RCOMP.EXE has been rebuilt.  Judging from the timestamps, the other

executables haven't been rebuilt for the last few releases.

To build rcomp, first run ..\src\BLDEX, then MNT BLDREL

Building is only possible from NT and makes use of lex and yacc from

T:\mks - this should be updated to use the GNUPro tools which we use to

build GCC, as the Cygnus toolchain is something we expect to have always

available.

Version 3.15

============

Released by SimonC, 01-Feb-1999

Fixed defects

	EDN484092 "RCOMP needs to be Symbianised"

	EDN584421 "Need to rebuild RCOMP with boilerplated headers"

Only RCOMP.EXE has been rebuilt.  Judging from the timestamps, the other executables

haven't been rebuilt for the last few releases.

To build rcomp, first run ..\src\BLDEX, then MNT BLDREL

Building is only possible from the NT and makes use of executables on T: so this can't

be rebuilt by licensees (which doesn't seem to have been a problem so far...)

Version 3.14

============

Released by PNJ, 19-Mar-1997

The CORE command and the test procedures rely on NT command extensions.

Version 314 mods

  1. In FILELINE.CPP, FileLineManager::ExtractFileName updated to add

     filename information planted by the preprocessor. This is a rewrite of

     the code that was removed in the previous release because it was

     violating.

  2. Test code now in a formalised framework accessed via MNT TEST. The

     formalism isn't perfect because of the limitations imposed by the

     legacy command language. See TEST.HTM in the TSRC directory for more

     information. The test procedure relies on NT command extensions.

  3. The CORE command procedure has been changed to allow preprocessor

     symbols to be defined. See below.

CORE syntax

CORE filename [ object_directory [options] ]

If options are being used the object directory parameter must be present,

the default value is "." for the current directory.

Options are:

/UNICODE

     Specifies that strings are emitted as Unicode in the resource binary.

     Previously, this option was selected with "-u", which is the parameter

     currently used by RCOMP itself.

/DEFINE symbol [ symbol...]

     Specifies one or more symbols to be defined for the preprocessor pass.

     This must be the last option supplied because it is followed by an

     arbitrary number of tokens and the command language is so primitive.

Version 3.13

============

Released by PNJ, 13-Jan-1997

Version number scheme is independent of product-specific E32 chain

numbering.

This is an interim release, to provide 16-bit character set functionality.

Later releases are planned to provide other requested features.  Existing

RSS files produce identical binaries to previous releases when compiled

in the default non-Unicode mode.

There are some serious defects in the source code which will take

a long time to address properly, eg misuse of assert as a status check.

1.  Minor changes to MNT and build settings.

2.  Minor code changes to remove warnings.

3.  Renamed STRING.CPP, .H to remove ambiguity with

    standard header of the same name.

4.  rcscan::yyerror function updated so that it actually

    interprets formatted strings instead of ignoring the extra