<?xml version="1.0" encoding="UTF-8"?>

<project name="SF-COMMON-TEST" xmlns:hlm="http://www.nokia.com/helium">

    <target name="sf-test-smoketest" depends="sf-prebuild,sf-build-smoketestpkg,sf-send-testpkg,sf-zip-logs,sf-publish" />

    <target name="sf-test-bc-check" depends="sf-prebuild,sf-bc-check,sf-zip-logs,sf-publish" />

    <target name="sf-find-ATS-worker-root" unless="sf.spec.test.workerroot">

      <property file="${sf.common.config.dir}/tools/ats/devices/${env.COMPUTERNAME}/EMULATOR_GENERIC_${env.COMPUTERNAME}.properties" prefix="sf.test.searching.for.temp.dir"/>

      <fail message="Unable to read TEMPDIR from ${sf.common.config.dir}/tools/ats/devices/${env.COMPUTERNAME}/EMULATOR_GENERIC_${env.COMPUTERNAME}.properties to set ATS worker root">

        <condition>

          <not>

            <isset property="sf.test.searching.for.temp.dir.TEMPDIR"/>

          </not>

        </condition>

      </fail>

      <property name="sf.spec.test.workerroot" value="${sf.test.searching.for.temp.dir.TEMPDIR}"/>

      <echo message="ATS Worker Root = ${sf.spec.test.workerroot}"/>

    </target>

    <target name ="sf-make-junction" depends="sf-find-ATS-worker-root">        

        <mkdir dir="${sf.spec.test.workerroot}/${sf.spec.test.epocroot}"/>

        <exec executable="perl" dir="${sf.common.config.dir}/tools/ats" failonerror="false" output="${build.log.dir}/ATS_${build.id}_make_junction.log">

        <arg value="make_junction.pl"/>

        <arg value="--link=${sf.spec.test.workerroot}/${sf.spec.test.epocroot}/epoc32"/>

        <arg value="--target=${build.drive}/epoc32"/>

        <arg value="--force"/>

      </exec>

    </target>

    <target name ="sf-delete-junction" depends="sf-find-ATS-worker-root">

      <exec executable="junction.exe" dir="${sf.spec.test.workerroot}/${sf.spec.test.epocroot}" failonerror="false" output="${build.log.dir}/ATS_${build.id}_delete_junction.log">

        <arg value="-d"/>

        <arg value="epoc32"/>

      </exec>

    </target>  

<!-- static and dynamic BC Test target -->

    <target name="sf-bc-check">

        <if><isset property="env.PDT_HOME"/>

        <then>

            <!-- create BC dir -->

            <mkdir dir="${build.log.dir}/BC"/>

            <delete file="${build.log.dir}/BC/bc.config" quiet="true"/>

            <delete file="${build.log.dir}/BC/BBCResults.xsl" quiet="true"/>

            <delete file="${build.log.dir}/BC/libraries.txt" quiet="true"/>

            <delete file="${build.log.dir}/BC/libraries_report.xml" quiet="true"/>

            <delete file="${build.log.dir}/BC/headers.txt" quiet="true"/>

            <delete file="${build.log.dir}/BC/headers_report.xml" quiet="true"/>

            <exec executable="cmd" output="${build.log.dir}/BC/bc.config" append="true">

                <arg value="/c"/>

                <arg value="echo"/>

                <arg value="BASELINE_NAME=${sf.spec.bccheck.baseline.name}"/>

            </exec>

            <exec executable="cmd" output="${build.log.dir}/BC/bc.config" append="true">

                <arg value="/c"/>

                <arg value="echo"/>

                <arg value="BASELINE_SDK_DIR=${sf.spec.bccheck.baseline.skd.dir}"/>

            </exec>

            <exec executable="cmd" output="${build.log.dir}/BC/bc.config" append="true">

                <arg value="/c"/>

                <arg value="echo"/>

                <arg value="BASELINE_SDK_S60_VERSION=${sf.spec.bccheck.baseline.s60.version}"/>

            </exec>

            <exec executable="cmd" output="${build.log.dir}/BC/bc.config" append="true">

                <arg value="/c"/>

                <arg value="echo"/>

                <arg value="CURRENT_NAME=${build.id}"/>

            </exec>

            <exec executable="cmd" output="${build.log.dir}/BC/bc.config" append="true">

                <arg value="/c"/>

                <arg value="echo"/>

                <arg value="CURRENT_SDK_DIR=${build.drive}"/>

            </exec>

            <exec executable="cmd" output="${build.log.dir}/BC/bc.config" append="true">

                <arg value="/c"/>

                <arg value="echo"/>

                <arg value="CURRENT_SDK_S60_VERSION=${sf.spec.bccheck.current.s60.version}"/>

            </exec>

            <copy file="${sf.spec.pdt.root}/fts/compatibilityanalyser/reports/BBCResults.xsl" tofile="${build.log.dir}/BC/BBCResults.xsl" failonerror="false" verbose="true"/>

            <if><istrue value="${sf.spec.bccheck.enable.la}"/>

                <then>

                    <exec executable="python" dir="${sf.spec.pdt.root}/fts/compatibilityanalyser" output="${build.log.dir}/BC/libraries.txt">

                        <arg value="CheckBC.py"/>

                        <arg value="${build.log.dir}/BC/bc.config"/>

                        <arg value="-la"/>

                        <arg value="-f"/>

                        <arg value="${sf.spec.bccheck.reportid}"/>

                    </exec>

                    <copy file="${sf.spec.pdt.root}/fts/compatibilityanalyser/reports/Libraries_CompatibilityReport_${sf.spec.bccheck.reportid}.xml" tofile="${build.log.dir}/BC/libraries_report.xml" failonerror="false" verbose="true"/>

                </then>

            </if>

            <if><istrue value="${sf.spec.bccheck.enable.ha}"/>

                <then>

                    <exec executable="python" dir="${sf.spec.pdt.root}/fts/compatibilityanalyser" output="${build.log.dir}/BC/headers.txt">

                        <arg value="CheckBC.py"/>

                        <arg value="${build.log.dir}/BC/bc.config"/>

                        <arg value="-ha"/>

                        <arg value="-f"/>

                        <arg value="${sf.spec.bccheck.reportid}"/>

                    </exec>

                    <copy file="${sf.spec.pdt.root}/fts/compatibilityanalyser/reports/Headers_CompatibilityReport_${sf.spec.bccheck.reportid}.xml" tofile="${build.log.dir}/BC/headers_report.xml" failonerror="false" verbose="true"/>

                </then>

            </if>

            <if><istrue value="${sf.spec.bccheck.enable.dynamic}"/>

                <then>

                    <for param="file">

						<path>

							<fileset dir="${sf.spec.test.package.location}/../bctest" includes="*.zip"/>

						</path>

						<sequential>

							<propertyregex override="yes" property="program"  input="@{file}" regexp="([^\\/\/]*)$" select="\1"/>  						

                            <echo message="INFO Updating bctest package with test info"/>

					        <echo message="************ Test drop package name:  ${program} " />

                            <exec executable="perl" dir="${sf.common.config.dir}/tools/ats/" failonerror="false" append="true" output="${build.log.dir}/ATS_${build.id}_dynamicbc.log">

                              <arg value="ats_specialise_test_drop.pl"/>

                              <arg value="--test-drop-name=${env.COMPUTERNAME}-bctest-${build.id}_${program}"/> 

                              <arg value="--host-name=${env.COMPUTERNAME}.ad-sfpd.intra"/>

                              <arg value="--src=${sf.spec.test.package.location}/../bctest/${program}"/>

                              <arg value="--dest=${sf.spec.test.package.location}\${env.COMPUTERNAME}-bctest-${build.id}_${program}" />

                              <arg value="--publish=${publish.dir}\ats_reports\${program}"/>

                            </exec>

                            <!-- Now ready to send to ATS -->  

					      <echo message="Sending Test drop :  ${program} ............" />									

					<antcall target="sf-send-testpkg" inheritAll="false">

                        <param name="sf.spec.test.package.name" value="${env.COMPUTERNAME}-bctest-${build.id}_${program}"/>

                    </antcall>					

						</sequential>

					</for>

				</then>

			</if>

		</then>

        <else>

            <echo message="WARNING: PDT_HOME not set, I dont know where the BC tools are installed so cannot continue"/>

        </else>

		</if>	

    </target>

	<!-- Preparing smoketest package (zip) for sending to ATS -->

	<target name="sf-build-smoketestpkg" depends="sf-getenv-tools">

        <echo message="INFO Building smoketest"/>

		<!-- Have to replace qt.conf with the one in the smoketest package -->

		<copy file="${build.drive}/epoc32/tools/qt/qt.conf" tofile="${build.drive}/epoc32/tools/qt/qt.conf.temp" overwrite="true" />

		<copy file="${build.drive}/smoketest/qt/qt.conf.smoketest" tofile="${build.drive}/epoc32/tools/qt/qt.conf" overwrite="true" />

         <fmpp sourceFile="${qt.qmake.ant.template}" outputFile="${temp.build.dir}/run-qmake-test.ant.xml">

            <data expandProperties="yes">

                data: xml(${build.drive}/smoketest/package_definition.xml)

                ant: antProperties()

            </data>

        </fmpp>

		<hlm:assertFileExists xmlns:hlm="http://www.nokia.com/helium" file="${temp.build.dir}/run-qmake-test.ant.xml"/>

		<!-- Running the qmake steps -->

        <ant antfile="${temp.build.dir}/run-qmake-test.ant.xml" dir="${build.drive}/" output="${compile.log.dir}/${build.id}_test.qmake.log"/>

        <exec executable="cmd" dir="${build.drive}/smoketest" failonerror="false" append="true" output="${build.log.dir}/ATS_${build.id}_smoketest.log">

            <arg value="/c"/>

            <arg value="sbs -c winscw_udeb -s package_definition.xml"/>

        </exec>

        <exec executable="cmd" dir="${build.drive}/smoketest" failonerror="false" append="true" output="${build.log.dir}/ATS_${build.id}_smoketest.log">

            <arg value="/c"/>

            <arg value="sbs -c winscw_udeb.test -s package_definition.xml"/>

        </exec>

		<!-- Be a good boy and put the file back where it was -->

		<copy file="${build.drive}/epoc32/tools/qt/qt.conf" tofile="${build.drive}/epoc32/tools/qt/qt.conf.smoketest" overwrite="true" />

		<copy file="${build.drive}/epoc32/tools/qt/qt.conf.temp" tofile="${build.drive}/epoc32/tools/qt/qt.conf" overwrite="true" />

        <echo message="INFO Creating smoketest testpackage"/>

        <exec executable="perl" dir="${build.drive}/smoketest/group" failonerror="false" append="true" output="${build.log.dir}/ATS_${build.id}_smoketest.log">

            <arg value="smoketest.pl"/>

			<arg value="--target=${sf.spec.test.target}"/>

			<arg value="--ats-version=${sf.spec.ats.version}"/>

        </exec>

        <copy file="${build.drive}/smoketest/group/smoketest.zip" todir="${sf.spec.test.package.location}"  failonerror="false"/>

        <echo message="INFO Updating smoketest package with test info"/>

        <exec executable="perl" dir="${sf.common.config.dir}/tools/ats/" failonerror="false" append="true" output="${build.log.dir}/ATS_${build.id}_smoketest.log">

          <arg value="ats_specialise_test_drop.pl"/>

          <arg value="--test-drop-name=Smoketest-${build.id}"/> 

          <arg value="--host-name=${env.COMPUTERNAME}.ad-sfpd.intra"/>

          <arg value="--src=${sf.spec.test.package.location}\smoketest.zip"/>

          <arg value="--dest=${sf.spec.test.package.location}\${sf.spec.test.package.name}"/>	

          <arg value="--build-id=http://${sf.spec.publish.diamonds.server}${diamonds.build.id}"/>	

          <arg value="--publish=${publish.dir}\ats_reports"/>

          <arg value="--bld-drive=${build.drive}"/>

          <arg value="--test-target=${sf.spec.test.target}"/>

          <arg value="--image-path=${sf.spec.test.image.location}\${sf.spec.test.image.name}"/>

          <arg value="--ats-version=${sf.spec.ats.version}"/>

        </exec>

        <!-- Now ready to send to ATS -->

    </target>   

	<!-- Sending testdrop to ATS -->

    <target name="sf-send-testpkg" depends="sf-start-ats,sf-find-ATS-worker-root,sf-make-junction">

        <if><equals arg1="${sf.spec.test.target}" arg2="syborg"/>

          <then>

            <delete file="${sf.spec.test.workerroot}/syborg.dtb" quiet="true"/>

            <copy file="${sf.spec.test.image.location}/syborg.dtb" todir="${sf.spec.test.workerroot}" failonerror="false"/>

          </then>

        </if>

        <mkdir dir="${sf.spec.test.workerroot}/${sf.spec.test.package.droppath}"/>

        <echo message="Sending test package ${sf.spec.test.package.name} to ${sf.spec.test.host.name} path ${sf.spec.test.host.droppath}"/>

        <exec executable="perl" dir="${sf.common.config.dir}/tools/ats" failonerror="false" output="${build.log.dir}/ATS_${build.id}_testdrop.log">

            <arg value="ats_testdrop.pl"/>

            <arg value="--host=${sf.spec.test.host.name}"/>

            <arg value="--username=${sf.spec.test.host.username}"/>

            <arg value="--password=${sf.spec.test.host.password}"/>

            <arg value="--local-test-pkg=${sf.spec.test.package.location}\${sf.spec.test.package.name}"/>

            <arg value="--local-drop-path=${sf.spec.test.workerroot}\${sf.spec.test.package.droppath}"/>

            <arg value="--host-drop-path=${sf.spec.test.host.droppath}"/>

            <arg value="--ats-version=${sf.spec.ats.version}"/>

            <arg value="--ats-worker-path=${sf.spec.ats_worker.drive}"/>

        </exec>

    </target>

    <target name="sf-start-ats">

        <if><equals arg1="${sf.spec.ats.version}" arg2="ats3"/>

            <then>

                <if><available file="${ats.drive}/start.cmd"/>  

                    <then>

                        <forget>

                            <exec executable="cmd" dir="${ats.drive}" failonerror="true">

                                <arg value="/c"/>

                                <arg value="start"/>

                                <arg value='"ATS3 STAF"'/>

                                <arg value="/D"/>

                                <arg value="."/>

                                <arg value="/MAX"/>

                                <arg value="run.cmd"/>

                            </exec>

                        </forget>

                        <echo message="Waiting for 10 seconds for the ATS Worker to start......."/>

                        <sleep seconds="10"/>

                    </then>

                </if>

            </then>

        </if>

        <if><equals arg1="${sf.spec.ats.version}" arg2="ats4"/>

            <then>

                <forget>

                    <exec executable="cmd" dir="${ats.drive}" failonerror="true">

                        <arg value="/c"/>

                        <arg value="start"/>

                        <arg value='"ATS4 Agent"'/>

                        <arg value="/D"/>

                        <arg value="."/>

                        <arg value="/MAX"/>

                        <arg value="startAgent.cmd"/>

                    </exec>

                </forget>

                <echo message="Waiting for 10 seconds for the ATS4 Agent(s) to start......."/>

                <sleep seconds="10"/>

                <forget>

                    <exec executable="cmd" dir="${ats.drive}" failonerror="true">

                        <arg value="/c"/>

                        <arg value="start"/>

                        <arg value='"ATS4 Engine"'/>

                        <arg value="/D"/>

                        <arg value="."/>

                        <arg value="/MAX"/>

                        <arg value="startEngine.cmd"/>

                    </exec>

                </forget>

                <echo message="Waiting for 10 seconds for the ATS4 Engine to start......."/>

                <sleep seconds="10"/>

            </then>

        </if>

    </target> 

</project>