Adjusted release tagging, so that it clones from the package source, not dst, and hence it's
much less likely that the tagging operation will create multiple heads on the TAGS branch.
<?xml version="1.0" encoding="UTF-8"?>
<project name="SF-COMMON-TEST" xmlns:hlm="http://www.nokia.com/helium">
<target name="sf-test-smoketest" depends="sf-prebuild,sf-build-smoketestpkg,sf-send-testpkg,sf-zip-logs,sf-publish" />
<target name="sf-test-bc-check" depends="sf-prebuild,sf-bc-check,sf-zip-logs,sf-publish" />
<target name="sf-find-ATS-worker-root" unless="sf.spec.test.workerroot">
<property file="${sf.common.config.dir}/tools/ats/devices/${env.COMPUTERNAME}/EMULATOR_GENERIC_${env.COMPUTERNAME}.properties" prefix="sf.test.searching.for.temp.dir"/>
<fail message="Unable to read TEMPDIR from ${sf.common.config.dir}/tools/ats/devices/${env.COMPUTERNAME}/EMULATOR_GENERIC_${env.COMPUTERNAME}.properties to set ATS worker root">
<condition>
<not>
<isset property="sf.test.searching.for.temp.dir.TEMPDIR"/>
</not>
</condition>
</fail>
<property name="sf.spec.test.workerroot" value="${sf.test.searching.for.temp.dir.TEMPDIR}"/>
<echo message="ATS Worker Root = ${sf.spec.test.workerroot}"/>
</target>
<target name ="sf-make-junction" depends="sf-find-ATS-worker-root">
<mkdir dir="${sf.spec.test.workerroot}/${sf.spec.test.epocroot}"/>
<exec executable="perl" dir="${sf.common.config.dir}/tools/ats" failonerror="false" output="${build.log.dir}/ATS_${build.id}_make_junction.log">
<arg value="make_junction.pl"/>
<arg value="--link=${sf.spec.test.workerroot}/${sf.spec.test.epocroot}/epoc32"/>
<arg value="--target=${build.drive}/epoc32"/>
<arg value="--force"/>
</exec>
</target>
<target name ="sf-delete-junction" depends="sf-find-ATS-worker-root">
<exec executable="junction.exe" dir="${sf.spec.test.workerroot}/${sf.spec.test.epocroot}" failonerror="false" output="${build.log.dir}/ATS_${build.id}_delete_junction.log">
<arg value="-d"/>
<arg value="epoc32"/>
</exec>
</target>
<!-- static and dynamic BC Test target -->
<target name="sf-bc-check">
<if><isset property="env.PDT_HOME"/>
<then>
<!-- create BC dir -->
<mkdir dir="${build.log.dir}/BC"/>
<delete file="${build.log.dir}/BC/bc.config" quiet="true"/>
<delete file="${build.log.dir}/BC/BBCResults.xsl" quiet="true"/>
<delete file="${build.log.dir}/BC/libraries.txt" quiet="true"/>
<delete file="${build.log.dir}/BC/libraries_report.xml" quiet="true"/>
<delete file="${build.log.dir}/BC/headers.txt" quiet="true"/>
<delete file="${build.log.dir}/BC/headers_report.xml" quiet="true"/>
<exec executable="cmd" output="${build.log.dir}/BC/bc.config" append="true">
<arg value="/c"/>
<arg value="echo"/>
<arg value="BASELINE_NAME=${sf.spec.bccheck.baseline.name}"/>
</exec>
<exec executable="cmd" output="${build.log.dir}/BC/bc.config" append="true">
<arg value="/c"/>
<arg value="echo"/>
<arg value="BASELINE_SDK_DIR=${sf.spec.bccheck.baseline.skd.dir}"/>
</exec>
<exec executable="cmd" output="${build.log.dir}/BC/bc.config" append="true">
<arg value="/c"/>
<arg value="echo"/>
<arg value="BASELINE_SDK_S60_VERSION=${sf.spec.bccheck.baseline.s60.version}"/>
</exec>
<exec executable="cmd" output="${build.log.dir}/BC/bc.config" append="true">
<arg value="/c"/>
<arg value="echo"/>
<arg value="CURRENT_NAME=${build.id}"/>
</exec>
<exec executable="cmd" output="${build.log.dir}/BC/bc.config" append="true">
<arg value="/c"/>
<arg value="echo"/>
<arg value="CURRENT_SDK_DIR=${build.drive}"/>
</exec>
<exec executable="cmd" output="${build.log.dir}/BC/bc.config" append="true">
<arg value="/c"/>
<arg value="echo"/>
<arg value="CURRENT_SDK_S60_VERSION=${sf.spec.bccheck.current.s60.version}"/>
</exec>
<copy file="${sf.spec.pdt.root}/fts/compatibilityanalyser/reports/BBCResults.xsl" tofile="${build.log.dir}/BC/BBCResults.xsl" failonerror="false" verbose="true"/>
<if><istrue value="${sf.spec.bccheck.enable.la}"/>
<then>
<exec executable="python" dir="${sf.spec.pdt.root}/fts/compatibilityanalyser" output="${build.log.dir}/BC/libraries.txt">
<arg value="CheckBC.py"/>
<arg value="${build.log.dir}/BC/bc.config"/>
<arg value="-la"/>
<arg value="-f"/>
<arg value="${sf.spec.bccheck.reportid}"/>
</exec>
<copy file="${sf.spec.pdt.root}/fts/compatibilityanalyser/reports/Libraries_CompatibilityReport_${sf.spec.bccheck.reportid}.xml" tofile="${build.log.dir}/BC/libraries_report.xml" failonerror="false" verbose="true"/>
</then>
</if>
<if><istrue value="${sf.spec.bccheck.enable.ha}"/>
<then>
<exec executable="python" dir="${sf.spec.pdt.root}/fts/compatibilityanalyser" output="${build.log.dir}/BC/headers.txt">
<arg value="CheckBC.py"/>
<arg value="${build.log.dir}/BC/bc.config"/>
<arg value="-ha"/>
<arg value="-f"/>
<arg value="${sf.spec.bccheck.reportid}"/>
</exec>
<copy file="${sf.spec.pdt.root}/fts/compatibilityanalyser/reports/Headers_CompatibilityReport_${sf.spec.bccheck.reportid}.xml" tofile="${build.log.dir}/BC/headers_report.xml" failonerror="false" verbose="true"/>
</then>
</if>
<if><istrue value="${sf.spec.bccheck.enable.dynamic}"/>
<then>
<for param="file">
<path>
<fileset dir="${sf.spec.test.package.location}/../bctest" includes="*.zip"/>
</path>
<sequential>
<propertyregex override="yes" property="program" input="@{file}" regexp="([^\\/\/]*)$" select="\1"/>
<echo message="INFO Updating bctest package with test info"/>
<echo message="************ Test drop package name: ${program} " />
<exec executable="perl" dir="${sf.common.config.dir}/tools/ats/" failonerror="false" append="true" output="${build.log.dir}/ATS_${build.id}_dynamicbc.log">
<arg value="ats_specialise_test_drop.pl"/>
<arg value="--test-drop-name=${env.COMPUTERNAME}-bctest-${build.id}_${program}"/>
<arg value="--host-name=${env.COMPUTERNAME}.ad-sfpd.intra"/>
<arg value="--src=${sf.spec.test.package.location}/../bctest/${program}"/>
<arg value="--dest=${sf.spec.test.package.location}\${env.COMPUTERNAME}-bctest-${build.id}_${program}" />
<arg value="--publish=${publish.dir}\ats_reports\${program}"/>
</exec>
<!-- Now ready to send to ATS -->
<echo message="Sending Test drop : ${program} ............" />
<antcall target="sf-send-testpkg" inheritAll="false">
<param name="sf.spec.test.package.name" value="${env.COMPUTERNAME}-bctest-${build.id}_${program}"/>
</antcall>
</sequential>
</for>
</then>
</if>
</then>
<else>
<echo message="WARNING: PDT_HOME not set, I dont know where the BC tools are installed so cannot continue"/>
</else>
</if>
</target>
<!-- Preparing smoketest package (zip) for sending to ATS -->
<target name="sf-build-smoketestpkg" depends="sf-getenv-tools">
<echo message="INFO Building smoketest"/>
<!-- Have to replace qt.conf with the one in the smoketest package -->
<copy file="${build.drive}/epoc32/tools/qt/qt.conf" tofile="${build.drive}/epoc32/tools/qt/qt.conf.temp" overwrite="true" />
<copy file="${build.drive}/smoketest/qt/qt.conf.smoketest" tofile="${build.drive}/epoc32/tools/qt/qt.conf" overwrite="true" />
<fmpp sourceFile="${qt.qmake.ant.template}" outputFile="${temp.build.dir}/run-qmake-test.ant.xml">
<data expandProperties="yes">
data: xml(${build.drive}/smoketest/package_definition.xml)
ant: antProperties()
</data>
</fmpp>
<hlm:assertFileExists xmlns:hlm="http://www.nokia.com/helium" file="${temp.build.dir}/run-qmake-test.ant.xml"/>
<!-- Running the qmake steps -->
<ant antfile="${temp.build.dir}/run-qmake-test.ant.xml" dir="${build.drive}/" output="${compile.log.dir}/${build.id}_test.qmake.log"/>
<exec executable="cmd" dir="${build.drive}/smoketest" failonerror="false" append="true" output="${build.log.dir}/ATS_${build.id}_smoketest.log">
<arg value="/c"/>
<arg value="sbs -c winscw_udeb -s package_definition.xml"/>
</exec>
<exec executable="cmd" dir="${build.drive}/smoketest" failonerror="false" append="true" output="${build.log.dir}/ATS_${build.id}_smoketest.log">
<arg value="/c"/>
<arg value="sbs -c winscw_udeb.test -s package_definition.xml"/>
</exec>
<!-- Be a good boy and put the file back where it was -->
<copy file="${build.drive}/epoc32/tools/qt/qt.conf" tofile="${build.drive}/epoc32/tools/qt/qt.conf.smoketest" overwrite="true" />
<copy file="${build.drive}/epoc32/tools/qt/qt.conf.temp" tofile="${build.drive}/epoc32/tools/qt/qt.conf" overwrite="true" />
<echo message="INFO Creating smoketest testpackage"/>
<exec executable="perl" dir="${build.drive}/smoketest/group" failonerror="false" append="true" output="${build.log.dir}/ATS_${build.id}_smoketest.log">
<arg value="smoketest.pl"/>
<arg value="--target=${sf.spec.test.target}"/>
<arg value="--ats-version=${sf.spec.ats.version}"/>
</exec>
<copy file="${build.drive}/smoketest/group/smoketest.zip" todir="${sf.spec.test.package.location}" failonerror="false"/>
<echo message="INFO Updating smoketest package with test info"/>
<exec executable="perl" dir="${sf.common.config.dir}/tools/ats/" failonerror="false" append="true" output="${build.log.dir}/ATS_${build.id}_smoketest.log">
<arg value="ats_specialise_test_drop.pl"/>
<arg value="--test-drop-name=Smoketest-${build.id}"/>
<arg value="--host-name=${env.COMPUTERNAME}.ad-sfpd.intra"/>
<arg value="--src=${sf.spec.test.package.location}\smoketest.zip"/>
<arg value="--dest=${sf.spec.test.package.location}\${sf.spec.test.package.name}"/>
<arg value="--build-id=http://${sf.spec.publish.diamonds.server}${diamonds.build.id}"/>
<arg value="--publish=${publish.dir}\ats_reports"/>
<arg value="--bld-drive=${build.drive}"/>
<arg value="--test-target=${sf.spec.test.target}"/>
<arg value="--image-path=${sf.spec.test.image.location}\${sf.spec.test.image.name}"/>
<arg value="--ats-version=${sf.spec.ats.version}"/>
</exec>
<!-- Now ready to send to ATS -->
</target>
<!-- Sending testdrop to ATS -->
<target name="sf-send-testpkg" depends="sf-start-ats,sf-find-ATS-worker-root,sf-make-junction">
<if><equals arg1="${sf.spec.test.target}" arg2="syborg"/>
<then>
<delete file="${sf.spec.test.workerroot}/syborg.dtb" quiet="true"/>
<copy file="${sf.spec.test.image.location}/syborg.dtb" todir="${sf.spec.test.workerroot}" failonerror="false"/>
</then>
</if>
<mkdir dir="${sf.spec.test.workerroot}/${sf.spec.test.package.droppath}"/>
<echo message="Sending test package ${sf.spec.test.package.name} to ${sf.spec.test.host.name} path ${sf.spec.test.host.droppath}"/>
<exec executable="perl" dir="${sf.common.config.dir}/tools/ats" failonerror="false" output="${build.log.dir}/ATS_${build.id}_testdrop.log">
<arg value="ats_testdrop.pl"/>
<arg value="--host=${sf.spec.test.host.name}"/>
<arg value="--username=${sf.spec.test.host.username}"/>
<arg value="--password=${sf.spec.test.host.password}"/>
<arg value="--local-test-pkg=${sf.spec.test.package.location}\${sf.spec.test.package.name}"/>
<arg value="--local-drop-path=${sf.spec.test.workerroot}\${sf.spec.test.package.droppath}"/>
<arg value="--host-drop-path=${sf.spec.test.host.droppath}"/>
<arg value="--ats-version=${sf.spec.ats.version}"/>
<arg value="--ats-worker-path=${sf.spec.ats_worker.drive}"/>
</exec>
</target>
<target name="sf-start-ats">
<if><equals arg1="${sf.spec.ats.version}" arg2="ats3"/>
<then>
<if><available file="${ats.drive}/start.cmd"/>
<then>
<forget>
<exec executable="cmd" dir="${ats.drive}" failonerror="true">
<arg value="/c"/>
<arg value="start"/>
<arg value='"ATS3 STAF"'/>
<arg value="/D"/>
<arg value="."/>
<arg value="/MAX"/>
<arg value="run.cmd"/>
</exec>
</forget>
<echo message="Waiting for 10 seconds for the ATS Worker to start......."/>
<sleep seconds="10"/>
</then>
</if>
</then>
</if>
<if><equals arg1="${sf.spec.ats.version}" arg2="ats4"/>
<then>
<forget>
<exec executable="cmd" dir="${ats.drive}" failonerror="true">
<arg value="/c"/>
<arg value="start"/>
<arg value='"ATS4 Agent"'/>
<arg value="/D"/>
<arg value="."/>
<arg value="/MAX"/>
<arg value="startAgent.cmd"/>
</exec>
</forget>
<echo message="Waiting for 10 seconds for the ATS4 Agent(s) to start......."/>
<sleep seconds="10"/>
<forget>
<exec executable="cmd" dir="${ats.drive}" failonerror="true">
<arg value="/c"/>
<arg value="start"/>
<arg value='"ATS4 Engine"'/>
<arg value="/D"/>
<arg value="."/>
<arg value="/MAX"/>
<arg value="startEngine.cmd"/>
</exec>
</forget>
<echo message="Waiting for 10 seconds for the ATS4 Engine to start......."/>
<sleep seconds="10"/>
</then>
</if>
</target>
</project>