Arnaudl adding work done by Darios on raptor summarise.
<?xml version="1.0" encoding="UTF-8"?>
<project name="SF-POSTBUILD" xmlns:hlm="http://www.nokia.com/helium">
<target name="sf-postbuild">
<echo>[SF-POSTBUILD]</echo>
<parallel>
<!-- TAG SOURCE CODE -->
<if>
<istrue value="${sf.spec.tagafterbuild.enable}" />
<then>
<echo message="Apply tag to the source code used in this build"/>
<runtarget target="sf-tag-hg-code"/>
</then>
</if>
<if>
<istrue value="${sf.spec.md5.enable}"/>
<then>
<echo message="INFO Creating MD5s"/>
<runtarget target="sf-run-evalid"/>
</then>
</if>
<if>
<istrue value="${sf.spec.package.bin.enable}"/>
<then>
<echo message="INFO Packaging Binaries"/>
<runtarget target="sf-package-binary"/>
<runtarget target="sf-package-tools"/>
<echo message="INFO Validate Zip files"/>
<runtarget target="sf-package-validate"/>
</then>
</if>
<!-- run build analysis tools -->
<runtarget target="sf-run-analysis"/>
</parallel>
<if><istrue value="${sf.spec.test.sendpkg.enable}"/>
<then>
<runtarget target="sf-build-smoketestpkg"/>
<runtarget target="sf-send-testpkg"/>
</then>
</if>
<runtarget target="sf-zip-logs"/>
<!-- Do BC check -->
<if><istrue value="${sf.spec.bccheck.enable}"/>
<then>
<runtarget target="sf-bc-check"/>
</then>
</if>
<!-- PUBLISH LOGS/REPORTS -->
<if>
<istrue value="${sf.spec.publish.enable}" />
<then>
<echo message="Publish log files and reports to ${sf.spec.publish.rootdir}"/>
<runtarget target="sf-publish"/>
</then>
</if>
</target>
<target name="sf-tag-hg-code">
<property name="sf.tagafterbuild.tag" value="${sf.spec.job.name}_${sf.spec.job.codeline}.${sf.spec.job.number}"/>
<fmpp sourceFile="${sf.common.config.dir}/templates/tag-hg-code.ant.xml.ftl"
outputFile="${sf.common.config.dir}/generated/tag-hg-code.ant.xml">
<data expandProperties="yes">
ant: antProperties()
data: csv(${sf.spec.sourcesync.sourcespecdir}/${sf.spec.sourcesync.sourcespecfile}, {separator:','})
</data>
</fmpp>
<ant antfile="${sf.common.config.dir}/generated/tag-hg-code.ant.xml"/>
</target>
<target name="sf-run-evalid">
<delete dir="${build.drive}/output/md5"/>
<mkdir dir="${build.drive}/output/md5"/>
<parallel>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/include output/md5/epoc32_include.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/s60 output/md5/epoc32_s60.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/localisation output/md5/epoc32_localisation.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -x \.sym$ -x ^armv5/udeb -x ^armv5/urel -x ^winscw/udeb -x ^winscw/urel -g epoc32/release output/md5/epoc32_release.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -x \.sym$ -g epoc32/release/armv5/udeb output/md5/epoc32_release_armv5_udeb.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -x \.sym$ -g epoc32/release/armv5/urel output/md5/epoc32_release_armv5_urel.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -x \.sym$ -g epoc32/release/winscw/udeb output/md5/epoc32_release_winscw_udeb.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -x \.sym$ -g epoc32/release/winscw/urel output/md5/epoc32_release_winscw_urel.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/cshlpcmp_template output/md5/epoc32_cshlpcmp_template.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/data output/md5/epoc32_data.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/engdoc output/md5/epoc32_engdoc.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/engineeringtools output/md5/epoc32_engineeringtools.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/gcc output/md5/epoc32_gcc.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/gcc_mingw output/md5/epoc32_gcc_mingw.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/ksa output/md5/epoc32_ksa.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/rom output/md5/epoc32_rom.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/rombuild output/md5/epoc32_rombuild.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/sbs_config output/md5/epoc32_sbs_config.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/sdk_special output/md5/epoc32_sdk_special.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/stdapis output/md5/epoc32_stdapis.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/stubs output/md5/epoc32_stubs.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/tools output/md5/epoc32_tools.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/wins output/md5/epoc32_wins.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/winscw output/md5/epoc32_winscw.md5"/>
</exec>
</parallel>
<!-- package MD5s directly into epoc32/relinfo location so that its usable out-of-the-box -->
<property name="temp.md5.zip" value="${env.TEMP}/MD5_${sf.spec.job.name}_${build.number}.zip"/>
<echo message="INFO Packaging MD5s"/>
<zip destfile="${temp.md5.zip}">
<zipfileset dir="${build.drive}/output/md5/" prefix="epoc32/relinfo"/>
</zip>
<move file="${temp.md5.zip}" todir="${build.log.dir}" failonerror="false"/>
</target>
<target name="sf-package-binary" depends="sf-preprocess-package-config,sf-package-postbuild-rnd">
<!-- Warning: Reverting to using the He zipper will also revert to a single zip for the binaries:
would need to update the template and possibly the script that populates it -->
<!--antcall target="sf-zip-content">
<param name="zip.config.file" value="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>
<param name="zip.target.name" value="bin" />
</antcall-->
<parallel>
<exec executable="7za" dir="${build.drive}" output="${build.log.dir}/zip_${build.id}_binaries_epoc32.log">
<arg value="a"/>
<arg value="-tzip"/>
<arg value="-x@${build.log.dir}/rnd_excludefile.txt"/>
<arg value="-x!epoc32\tools"/>
<arg value="-x!epoc32\build"/>
<arg value="-x!epoc32\release\armv5"/>
<arg value="-x!epoc32\release\winscw"/>
<arg value="-xr!*.sym"/>
<arg value="${build.drive}/output/zips/release/binaries_epoc.zip"/>
<arg value="epoc32\"/>
</exec>
<exec executable="7za" dir="${build.drive}" output="${build.log.dir}/zip_${build.id}_binaries_winscw.log">
<arg value="a"/>
<arg value="-tzip"/>
<arg value="-x@${build.log.dir}/rnd_excludefile.txt"/>
<arg value="-xr!*.sym"/>
<arg value="${build.drive}/output/zips/release/binaries_winscw.zip"/>
<arg value="epoc32\release\winscw\"/>
</exec>
<exec executable="7za" dir="${build.drive}" output="${build.log.dir}/zip_${build.id}_binaries_armv5.log">
<arg value="a"/>
<arg value="-tzip"/>
<arg value="-x@${build.log.dir}/rnd_excludefile.txt"/>
<arg value="-xr!*.sym"/>
<arg value="${build.drive}/output/zips/release/binaries_armv5.zip"/>
<arg value="epoc32\release\armv5\"/>
</exec>
</parallel>
</target>
<target name="sf-package-postbuild-rnd" depends="sf-preprocess-package-config">
<!-- zip any RnD _includefile.txt files generated during source packaging -->
<exec executable="perl" dir="${build.drive}/" failonerror="false" output="${build.log.dir}/zip_postbuild.log">
<arg value="${sf.common.config.dir}/tools/zip_includefiles.pl"/>
</exec>
<!-- cleanup my moving includefiles to logs and zips to zips\release -->
<move todir="${build.log.dir}">
<fileset dir="${build.drive}"><include name="*_includefile.txt"/></fileset>
</move>
<move todir="${build.drive}/output/zips/release">
<fileset dir="${build.drive}"><include name="bin*.zip"/></fileset>
</move>
<!-- TODO: merge with release_metadata.xml ? -->
</target>
<target name="sf-package-tools" depends="sf-preprocess-package-config">
<echo message="Packaging epoc32 tools - Temporary method"/>
<exec executable="7za" dir="${build.drive}" output="${build.log.dir}/zip_${build.id}_tools_epoc32.log">
<arg value="a"/>
<arg value="-tzip"/>
<arg value="-x@${build.log.dir}/rnd_excludefile.txt"/>
<!-- <arg value="-x@${build.log.dir}/*_includefile.txt"/> -->
<arg value="${build.drive}/output/zips/release/tools_epoc.zip"/>
<arg value="epoc32/tools"/>
</exec>
</target>
<target name="sf-package-validate">
<exec executable="7z" dir="${build.drive}/output/zips" failonerror="false" output="${build.drive}/output/zips/validate.log">
<arg value="t"/>
<arg value="*.zip"/>
</exec>
<exec executable="7z" dir="${build.drive}/output/zips/release" failonerror="false" output="${build.drive}/output/zips/release/validate.log">
<arg value="t"/>
<arg value="*.zip"/>
</exec>
</target>
<!-- runs analysis of missing bins and source -->
<target name="sf-run-analysis">
<mkdir dir="${build.log.dir}/analysis"/>
<parallel>
<runtarget target="sf-run-analysis-ant"/>
<runtarget target="sf-run-analysis-raptor"/>
<runtarget target="sf-run-analysis-yarp"/>
<runtarget target="sf-run-analysis-whatlog-summary"/>
</parallel>
<if>
<istrue value="${sf.spec.publish.enable}"/>
<then>
<runtarget target="sf-run-analysis-diamonds"/>
</then>
</if>
</target>
<target name="sf-run-analysis-ant">
<echo message="Running source analysis of ANT output"/>
<exec executable="perl" dir="${build.log.dir}" failonerror="false" output="${build.log.dir}/analysis/${build.id}_scan_ant.log">
<arg value="${sf.common.config.dir}/tools/analysis/scan_antlogs.pl"/>
<arg value="*ant*"/>
</exec>
</target>
<target name="sf-run-analysis-raptor">
<echo message="Preprocessing *_compile.log files"/>
<for param="logfile">
<path>
<fileset dir="${build.log.dir}">
<include name="*_compile.log"/>
<exclude name="*build_check_compile.log"/>
</fileset>
</path>
<sequential>
<propertyregex override="yes" property="preprocessedlogfile" input="@{logfile}" regexp=".*[\\/](.*)_compile\.log" replace="\1_compile_preprocessed.log"/>
<echo message="Preprocessing @{logfile}..."/>
<exec executable="perl" dir="${sf.common.config.dir}/tools/raptor" failonerror="false" input="@{logfile}" output="${build.log.dir}/analysis/${preprocessedlogfile}" error="${build.log.dir}/analysis/${build.id}_preprocess.log" append="true">
<arg value="${sf.common.config.dir}/tools/raptor/preprocess_log.pl"/>
</exec>
</sequential>
</for>
<echo message="Extracting whatlog information from *whatlog*_compile_preprocessed.log files"/>
<for param="whatlogfile">
<path>
<fileset dir="${build.log.dir}/analysis">
<include name="*whatlog*_compile_preprocessed.log"/>
</fileset>
</path>
<sequential>
<echo message="Extracting whatlog info from @{whatlogfile}..."/>
<echo message="Exec: [${sf.common.config.dir}/tools/raptor] perl ${sf.common.config.dir}/tools/raptor/parse.pl --releaseable --log=@{whatlogfile} --basedir=${build.log.dir} --append"/>
<exec executable="perl" dir="${sf.common.config.dir}/tools/raptor" failonerror="false" output="${build.log.dir}/analysis/${build.id}_whatlog.log" append="true">
<arg value="${sf.common.config.dir}/tools/raptor/parse.pl"/>
<arg value="--releaseable"/>
<arg value="--log=@{whatlogfile}"/>
<arg value="--basedir=${build.log.dir}"/>
<arg value="--append"/>
</exec>
</sequential>
</for>
<echo message="Extracting error information from *_compile_preprocessed.log files"/>
<for param="raptorlogfile">
<path>
<fileset dir="${build.log.dir}/analysis">
<include name="*_compile_preprocessed.log"/>
</fileset>
</path>
<sequential>
<echo message="Extracting error info from @{raptorlogfile}..."/>
<propertyregex override="yes" property="raptorconfig" input="@{raptorlogfile}" regexp=".*[\\/].*__(.*)\.whatlog_(single|multiple)_thread.*" replace="\1" casesensitive="false" defaultValue="noconfig"/>
<echo message="Exec: [${sf.common.config.dir}/tools/raptor] perl ${sf.common.config.dir}/tools/raptor/parse.pl --error --warning --unreciped --recipe --config=${raptorconfig} --log=@{raptorlogfile} --basedir=${build.log.dir}/raptorbits --append"/>
<exec executable="perl" dir="${sf.common.config.dir}/tools/raptor" failonerror="false" output="${build.log.dir}/analysis/${build.id}_raptorparse.log" append="true">
<arg value="${sf.common.config.dir}/tools/raptor/parse.pl"/>
<arg value="--error"/>
<arg value="--warning"/>
<arg value="--unreciped"/>
<arg value="--recipe"/>
<arg value="--config=${raptorconfig}"/>
<arg value="--log=@{raptorlogfile}"/>
<arg value="--basedir=${build.log.dir}/raptorbits"/>
<arg value="--append"/>
</exec>
</sequential>
</for>
<echo message="Exec: [${sf.common.config.dir}/tools/raptor] perl ${sf.common.config.dir}/tools/raptor/summarize.pl --raptorbitsdir=${build.log.dir}/raptorbits --outputdir=${build.log.dir}"/>
<exec executable="perl" dir="${sf.common.config.dir}/tools/raptor" failonerror="false" output="${build.log.dir}/analysis/${build.id}_raptorparse.log" append="true">
<arg value="${sf.common.config.dir}/tools/raptor/summarize.pl"/>
<arg value="--raptorbitsdir=${build.log.dir}/raptorbits"/>
<arg value="--outputdir=${build.log.dir}"/>
</exec>
<!-- Now iterate through the generated TSVs to sort them and remove duplicates -->
<for param="tsv">
<path>
<fileset dir="${build.log.dir}">
<include name="releaseables/**/*.tsv"/>
</fileset>
</path>
<sequential>
<exec executable="perl" input="@{tsv}" output="@{tsv}">
<arg value="${sf.common.config.dir}/tools/sortUnique.pl"/>
</exec>
</sequential>
</for>
</target>
<target name="sf-run-analysis-yarp">
<echo message="Running yarp over *_compile.log files"/>
<for param="logfile">
<path>
<fileset dir="${build.log.dir}">
<include name="*_compile.log"/>
<exclude name="*build_check_compile.log"/>
</fileset>
</path>
<sequential>
<propertyregex override="yes" property="yarpfile" input="@{logfile}" regexp=".*[\\|\/](.*)_compile\.log" replace="\1_yarp.csv"/>
<propertyregex override="yes" property="yarpfile_short" input="${yarpfile}" regexp="[^_]*_[^_]*_[^_]*_(.+)_[^_]*_yarp\.csv" replace="YARP_\1"/>
<echo message="Yarping @{logfile}..."/>
<exec executable="perl" dir="${build.drive}" failonerror="false" output="${build.log.dir}/analysis/${yarpfile}.log" append="true">
<arg value="${sf.common.config.dir}/tools/analysis/yarp.pl"/>
<arg value="@{logfile}"/>
<arg value="${build.log.dir}/analysis/${yarpfile}"/>
</exec>
<exec executable="cmd" output="${build.drive}/output/logs/analysis/tmp_yarp_files.csv" append="true">
<arg value="/c"/>
<arg value="echo"/>
<arg value="${yarpfile_short},${sf.spec.publish.networkdrive}\${sf.spec.job.name}\builds\${sf.spec.job.codeline}\${build.id}\logs\analysis\${yarpfile},${build.drive}\output\logs\analysis\${yarpfile}"/>
</exec>
</sequential>
</for>
<exec executable="perl" dir="${build.drive}" failonerror="false" outputproperty="sf.job.totalyarperrors">
<arg value="${sf.common.config.dir}/tools/analysis/parse_yarp_files.pl"/>
<arg value="${build.drive}/output/logs/analysis/tmp_yarp_files.csv"/>
</exec>
<echo message="Total yarp errors: ${sf.job.totalyarperrors}"/>
</target>
<target name="sf-run-analysis-whatlog-summary" >
<sequential>
<parallel>
<runtarget target="sf-run-analysis-list"/>
<runtarget target="sf-run-analysis-whatlog"/>
</parallel>
<runtarget target="sf-run-analysis-whatlog-merge" />
<parallel>
<runtarget target="sf-run-analysis-whatlog-package"/>
<runtarget target="sf-run-analysis-whatlog-collisons"/>
</parallel>
</sequential>
</target>
<target name="sf-run-analysis-list">
<echo message="Running list analysis"/>
<exec executable="perl" dir="${build.log.dir}/analysis" failonerror="false" output="${build.log.dir}/analysis/${build.id}_list_results.log">
<arg value="${sf.common.config.dir}/tools/analysis/parselistdirs.pl"/>
<arg value="..\"/>
</exec>
</target>
<target name="sf-run-analysis-whatlog">
<echo message="Running whatlog analysis"/>
<exec executable="perl" dir="${build.log.dir}/analysis" failonerror="false" output="${build.log.dir}/analysis/${build.id}_what_results.csv">
<arg value="${sf.common.config.dir}/tools/analysis/parsewhatlog.pl"/>
<arg value="..\"/>
</exec>
</target>
<target name="sf-run-analysis-whatlog-merge" >
<echo message="Running summary analysis"/>
<exec executable="perl" dir="${build.log.dir}/analysis" failonerror="false" output="${build.log.dir}/analysis/${build.id}_summary.log">
<arg value="${sf.common.config.dir}/tools/analysis/merge_csv.pl"/>
<arg value="${build.id}_what_results.csv"/>
<arg value="${build.id}_list_results.log"/>
<arg value="${build.drive}/output/zips/release/binaries_epoc_additional.zip"/>
</exec>
</target>
<target name="sf-run-analysis-whatlog-package" >
<exec executable="perl" dir="${build.log.dir}/analysis" failonerror="false" output="${build.log.dir}/analysis/${build.id}_analysecomponents.log">
<arg value="${sf.common.config.dir}/tools/analysis/analyse_components.pl"/>
<arg value="${sf.spec.sourcesync.sourcespecdir}/${sf.spec.sourcesync.sourcespecfile}"/>
<arg value="${build.id}_what_results.csv_results.csv"/>
<arg value="${sf.project.location}/sysdefs/system_model_os.xml"/>
</exec>
</target>
<target name="sf-run-analysis-whatlog-collisons" >
<echo message="Running collision analysis"/>
<exec executable="perl" dir="${build.drive}" failonerror="false" output="${build.log.dir}/analysis/${build.id}_collisions.log">
<arg value="${sf.common.config.dir}/tools/analysis/find_collisions.pl"/>
<arg value="${build.log.dir}/analysis/${build.id}_what_results.csv"/>
</exec>
</target>
<target name="sf-run-analysis-diamonds">
<fmpp sourceFile="${sf.common.config.dir}/diamonds/sf-run-analysis.xml.ftl" outputFile="${build.drive}/output/logs/sf-run-analysis.xml">
<data expandProperties="yes">
ant: antProperties()
raptor_summary: csv(${build.log.dir}/raptorbits/summary.csv,{separator:',',headers:[category,subcategory,severity,config,component,phase,recipe,file,line]})
files: csv(${build.drive}/output/logs/analysis/tmp_yarp_files.csv,{separator:',',headers:[name,path,localpath]})
</data>
</fmpp>
</target>
<target name="sf-build-smoketestpkg" depends="sf-getenv-tools">
<delete dir ="${build.drive}/smoketest"/>
<delete file ="${build.log.dir}/ATS_${build.id}_smoketest.log"/>
<echo message="INFO Copy smoketest source to EPOCROOT"/>
<copy todir="${build.drive}/smoketest">
<fileset dir="${sf.common.config.dir}/tools/ats/smoketest"/>
</copy>
<echo message="INFO Building smoketest"/>
<exec executable="cmd" dir="${build.drive}/smoketest/group" failonerror="false" append="true" output="${build.log.dir}/ATS_${build.id}_smoketest.log">
<arg value="/c"/>
<arg value="sbs -b bld.inf -c winscw_udeb.test"/>
</exec>
<echo message="INFO Creating smoketest testpackage"/>
<exec executable="perl" dir="${build.drive}/smoketest/group" failonerror="false" append="true" output="${build.log.dir}/ATS_${build.id}_smoketest.log">
<arg value="smoketest.pl"/>
</exec>
<copy file="${build.drive}/smoketest/group/smoketest.zip" todir="${sf.spec.test.package.location}"/>
<echo message="INFO Updating smoketest package with test info"/>
<exec executable="perl" dir="${sf.common.config.dir}/tools/ats/" failonerror="false" append="true" output="${build.log.dir}/ATS_${build.id}_smoketest.log">
<arg value="ats_specialise_test_drop.pl"/>
<arg value="--test-drop-name=Smoketest-${build.id}"/>
<arg value="--device-name=GENERIC EMULATOR on ${env.COMPUTERNAME}"/>
<arg value="--src=${sf.spec.test.package.location}\smoketest.zip"/>
<arg value="--dest=${sf.spec.test.package.location}\${sf.spec.test.package.name}"/>
<arg value="--build-id=http://${sf.spec.publish.diamonds.server}${diamonds.build.id}"/>
</exec>
<!-- Now ready to send to ATS3 -->
</target>
<target name="sf-send-testpkg" depends="sf-find-ATS-worker-root,sf-make-junction">
<mkdir dir="${sf.spec.test.workerroot}/${sf.spec.test.package.droppath}"/>
<echo message="Sending test package ${sf.spec.test.package.name} to ${sf.spec.test.host.name} path ${sf.spec.test.host.droppath}"/>
<exec executable="perl" dir="${sf.common.config.dir}/tools/ats" failonerror="false" output="${build.log.dir}/ATS_${build.id}_testdrop.log">
<arg value="ats3_testdrop.pl"/>
<arg value="--host=${sf.spec.test.host.name}"/>
<arg value="--username=${sf.spec.test.host.username}"/>
<arg value="--password=${sf.spec.test.host.password}"/>
<arg value="--local-test-pkg=${sf.spec.test.package.location}\${sf.spec.test.package.name}"/>
<arg value="--local-drop-path=${sf.spec.test.workerroot}/${sf.spec.test.package.droppath}"/>
<arg value="--host-drop-path=${sf.spec.test.host.droppath}"/>
</exec>
</target>
<!-- package all logs into zipfile before publish -->
<target name="sf-zip-logs">
<if>
<istrue value="${sf.spec.logs.zip.enable}"/>
<then>
<property name="temp.log.dir" value="${env.TEMP}/${build.id}_output_logs"/>
<echo message="Zip log requested, zipping logs..."/>
<mkdir dir="${temp.log.dir}"/>
<zip destfile="${temp.log.dir}/build_logs.zip" basedir="${build.drive}">
<include name="output/logs/**"/>
<exclude name="output/logs/BOM/**"/>
<exclude name="output/logs/deliverables/**"/>
<exclude name="output/logs/releaseables/**"/>
</zip>
<zip destfile="${temp.log.dir}/build_BOM.zip">
<zipfileset dir="${build.drive}/output/logs/BOM" prefix="build_info/logs/BOM"/>
<zipfileset dir="${build.drive}/output/logs/releaseables" prefix="build_info/logs/releaseables"/>
</zip>
<move todir="${build.log.dir}">
<fileset dir="${temp.log.dir}"/>
</move>
</then>
</if>
</target>
<target name="sf-bc-check">
<if><isset property="env.PDT_HOME"/>
<then>
<!-- create BC dir -->
<mkdir dir="${build.log.dir}/BC"/>
<delete file="${build.log.dir}/BC/bc.config" quiet="true"/>
<delete file="${build.log.dir}/BC/BBCResults.xsl" quiet="true"/>
<delete file="${build.log.dir}/BC/libraries.txt" quiet="true"/>
<delete file="${build.log.dir}/BC/libraries_report.xml" quiet="true"/>
<delete file="${build.log.dir}/BC/headers.txt" quiet="true"/>
<delete file="${build.log.dir}/BC/headers_report.xml" quiet="true"/>
<exec executable="cmd" output="${build.log.dir}/BC/bc.config" append="true">
<arg value="/c"/>
<arg value="echo"/>
<arg value="BASELINE_NAME=${sf.spec.bccheck.baseline.name}"/>
</exec>
<exec executable="cmd" output="${build.log.dir}/BC/bc.config" append="true">
<arg value="/c"/>
<arg value="echo"/>
<arg value="BASELINE_SDK_DIR=${sf.spec.bccheck.baseline.skd.dir}"/>
</exec>
<exec executable="cmd" output="${build.log.dir}/BC/bc.config" append="true">
<arg value="/c"/>
<arg value="echo"/>
<arg value="BASELINE_SDK_S60_VERSION=${sf.spec.bccheck.baseline.s60.version}"/>
</exec>
<exec executable="cmd" output="${build.log.dir}/BC/bc.config" append="true">
<arg value="/c"/>
<arg value="echo"/>
<arg value="CURRENT_NAME=${build.id}"/>
</exec>
<exec executable="cmd" output="${build.log.dir}/BC/bc.config" append="true">
<arg value="/c"/>
<arg value="echo"/>
<arg value="CURRENT_SDK_DIR=${build.drive}"/>
</exec>
<exec executable="cmd" output="${build.log.dir}/BC/bc.config" append="true">
<arg value="/c"/>
<arg value="echo"/>
<arg value="CURRENT_SDK_S60_VERSION=${sf.spec.bccheck.current.s60.version}"/>
</exec>
<copy file="${sf.spec.pdt.root}/fts/compatibilityanalyser/reports/BBCResults.xsl" tofile="${build.log.dir}/BC/BBCResults.xsl" failonerror="false" verbose="true"/>
<if><istrue value="${sf.spec.bccheck.enable.la}"/>
<then>
<exec executable="python" dir="${sf.spec.pdt.root}/fts/compatibilityanalyser" output="${build.log.dir}/BC/libraries.txt">
<arg value="CheckBC.py"/>
<arg value="${build.log.dir}/BC/bc.config"/>
<arg value="-la"/>
<arg value="-f"/>
<arg value="${sf.spec.bccheck.reportid}"/>
</exec>
<copy file="${sf.spec.pdt.root}/fts/compatibilityanalyser/reports/Libraries_CompatibilityReport_${sf.spec.bccheck.reportid}.xml" tofile="${build.log.dir}/BC/libraries_report.xml" failonerror="false" verbose="true"/>
</then>
</if>
<if><istrue value="${sf.spec.bccheck.enable.ha}"/>
<then>
<exec executable="python" dir="${sf.spec.pdt.root}/fts/compatibilityanalyser" output="${build.log.dir}/BC/headers.txt">
<arg value="CheckBC.py"/>
<arg value="${build.log.dir}/BC/bc.config"/>
<arg value="-ha"/>
<arg value="-f"/>
<arg value="${sf.spec.bccheck.reportid}"/>
</exec>
<copy file="${sf.spec.pdt.root}/fts/compatibilityanalyser/reports/Headers_CompatibilityReport_${sf.spec.bccheck.reportid}.xml" tofile="${build.log.dir}/BC/headers_report.xml" failonerror="false" verbose="true"/>
</then>
</if>
<if><istrue value="${sf.spec.bccheck.enable.dynamic}"/>
<then>
<echo message="INFO Updating bctest package with test info"/>
<exec executable="perl" dir="${sf.common.config.dir}/tools/ats/" failonerror="false" append="true" output="${build.log.dir}/ATS_${build.id}_dynamicbc.log">
<arg value="ats_specialise_test_drop.pl"/>
<arg value="--test-drop-name=bctest-${build.id}"/>
<arg value="--device-name=GENERIC EMULATOR on ${env.COMPUTERNAME}"/>
<arg value="--src=${sf.spec.test.package.location}\..\bctest\bctest.zip"/>
<arg value="--dest=${sf.spec.test.package.location}\${sf.spec.bccheck.package.name}"/>
</exec>
<!-- Now ready to send to ATS3 -->
<antcall target="sf-send-testpkg" inheritAll="false">
<param name="sf.spec.test.package.name" value="${sf.spec.bccheck.package.name}"/>
</antcall>
</then>
</if>
</then>
<else>
<echo message="WARNING: PDT_HOME not set, I dont know where the BC tools are installed so cannot continue"/>
</else>
</if>
</target>
<target name="sf-publish" depends="prep-publish">
<copy todir="${publish.dir}" preservelastmodified="true" failonerror="false">
<fileset dir="${build.log.dir}"><include name="*.zip"/></fileset>
</copy>
</target>
</project>