/****************************************************************************

**

** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).

** All rights reserved.

** Contact: Nokia Corporation (qt-info@nokia.com)

**

** This file is part of the documentation of the Qt Toolkit.

**

** $QT_BEGIN_LICENSE:LGPL$

** No Commercial Usage

** This file contains pre-release code and may not be distributed.

** You may use this file in accordance with the terms and conditions

** contained in the Technology Preview License Agreement accompanying

** this package.

**

** GNU Lesser General Public License Usage

** Alternatively, this file may be used under the terms of the GNU Lesser

** General Public License version 2.1 as published by the Free Software

** Foundation and appearing in the file LICENSE.LGPL included in the

** packaging of this file.  Please review the following information to

** ensure the GNU Lesser General Public License version 2.1 requirements

** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.

**

** In addition, as a special exception, Nokia gives you certain additional

** rights.  These rights are described in the Nokia Qt LGPL Exception

** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.

**

** If you have questions regarding the use of this file, please contact

** Nokia at qt-info@nokia.com.

**

**

**

**

**

**

**

**

** $QT_END_LICENSE$

**

****************************************************************************/

/*!

\group installation

\title Installation

\brief Installing Qt on supported platforms.

The installation procedure is different on each Qt platform.

Please follow the instructions for your platform from the following list.

\generatelist{related}

*/

/*! \page install-x11.html

\title Installing Qt on X11 Platforms

\ingroup installation

\brief How to install Qt on platforms with X11.

\previouspage Installation

\note Qt for X11 has some requirements that are given in more detail

in the \l{Qt for X11 Requirements} document.

\list 1

\o  If you have the commercial edition of Qt, install your license

    file as \c{$HOME/.qt-license}.

    For the open source version you do not need a license file.

\o  Unpack the archive if you have not done so already. For example,

    if you have the \c{qt-everywhere-opensource-src-%VERSION%.tar.gz}

    package, type the following commands at a command line prompt:

\snippet doc/src/snippets/code/doc_src_installation.qdoc 0

    This creates the directory \c{/tmp/qt-everywhere-opensource-src-%VERSION%}

    containing the files from the archive. We only support the GNU version of

    the tar archiving utility. Note that on some systems it is called gtar.

\o  Building

    To configure the Qt library for your machine type, run the

    \c{./configure} script in the package directory.

    By default, Qt is configured for installation in the

    \c{/usr/local/Trolltech/Qt-%VERSION%} directory, but this can be

    changed by using the \c{-prefix} option.

\snippet doc/src/snippets/code/doc_src_installation.qdoc 1

    Type \c{./configure -help} to get a list of all available options.

    To create the library and compile all the demos, examples, tools,

    and tutorials, type:

\snippet doc/src/snippets/code/doc_src_installation.qdoc 2

    If \c{-prefix} is outside the build directory, you need to install

    the library, demos, examples, tools, and tutorials in the appropriate

    place. To do this, type:

\snippet doc/src/snippets/code/doc_src_installation.qdoc 3

    , as root if necessary.

    Note that on some systems the make utility is named differently,

    e.g. gmake. The configure script tells you which make utility to

    use.

    \bold{Note:} If you later need to reconfigure and rebuild Qt from the

    same location, ensure that all traces of the previous configuration are

    removed by entering the build directory and typing \c{make confclean}

    before running \c configure again.

\o  Environment variables

    In order to use Qt, some environment variables needs to be

    extended.

\snippet doc/src/snippets/code/doc_src_installation.qdoc 4

    This is done like this:

    In \c{.profile} (if your shell is bash, ksh, zsh or sh), add the

    following lines:

\snippet doc/src/snippets/code/doc_src_installation.qdoc 5

    In \c{.login} (in case your shell is csh or tcsh), add the following line:

\snippet doc/src/snippets/code/doc_src_installation.qdoc 6

    If you use a different shell, please modify your environment

    variables accordingly.

    For compilers that do not support rpath you must also extended the

    \c LD_LIBRARY_PATH environment variable to include

    \c{/usr/local/Trolltech/Qt-%VERSION%/lib}. On Linux with GCC this step

    is not needed.

\o  That's all. Qt is now installed.

    If you are new to Qt, we suggest that you take a look at the demos

    and examples to see Qt in action. Run the Qt Examples and Demos

    either by typing \c qtdemo on the command line or through the

    desktop's Main menu.

    You might also want to try the following links:

    \list

    \o \l{Configuring Qt}

    \o \l{How to Learn Qt}

    \o \l{Tutorials}

    \o \l{Developer Zone}

    \o \l{Deploying Qt Applications}

    \endlist

\endlist

    We hope you will enjoy using Qt. Good luck!

*/

/*!

\page install-win.html

\title Installing Qt on Windows

\ingroup installation

\brief How to install Qt on Windows.

\previouspage Installation

\note Qt for Windows has some requirements that are given in more detail

in the \l{Qt for Windows Requirements} document.

\table

\row \o \bold{Notes:}

\list

\o If you have obtained a binary package for this platform,

consult the installation instructions provided instead of the ones in

this document.

\o \l{Open Source Versions of Qt} is not officially supported for use with

any version of Visual Studio. Integration with Visual Studio is available

as part of the \l{Qt Commercial Editions}.

\endlist

\endtable

\list 1

\o  If you have the commercial edition of Qt, copy the license file

    from your account on dist.trolltech.com into your home directory

    (this may be known as the \c userprofile environment variable) and

    rename it to \c{.qt-license}. This renaming process must be done

    using a \e{command prompt} on Windows, \bold{not} with Windows Explorer.

    For example on Windows 2000, \c{%USERPROFILE%} should be something

    like \c{C:\Documents and Settings\username}

    For the open source version you do not need a license file.

\o  Uncompress the files into the directory you want Qt installed;

    e.g. \c{C:\Qt\%VERSION%}.

    \note The install path must not contain any spaces or Windows specific

    file system characters.

\o Environment variables

    In order to build and use Qt, the \c PATH environment variable needs to be

    extended:

\snippet doc/src/snippets/code/doc_src_installation.qdoc 7

    This is done by adding \c{c:\Qt\%VERSION%\bin} to the \c PATH variable.

    For newer versions of Windows, \c PATH can be extended through

    the \menu{Control Panel|System|Advanced|Environment variables} menu.

    You may also need to ensure that the locations of your compiler and

    other build tools are listed in the \c PATH variable. This will depend

    on your choice of software development environment.

    \bold{Note}: If you don't use the configured shells, which is

    available in the application menu, in the \l{Open Source Versions of Qt},

    \c configure requires that \c sh.exe is not in the path

    or that it is run from \c msys. This also goes for mingw32-make.

\o Building

    To configure the Qt library for your machine, type the following command

    in a \bold{Visual Studio} command prompt:

\snippet doc/src/snippets/code/doc_src_installation.qdoc 8

    Type \c{configure -help} to get a list of all available options.

    If you have multiple compilers installed, and want to build the Qt library

    using a specific compiler, you must specify a \c qmake specification.

    This is done by pasing \c{-platform <spec>} to configure; for example:

\snippet doc/src/snippets/code/doc_src_installation.qdoc 9

    In some cases you need to set up the compilation environment before running

    configure in order to use the right compiler. For instance, you need to do this

    if you have Visual Studio 2005 installed and want to compile Qt using the x64

    compiler because the 32-bit and 64-bit compiler both use the same

    \c qmake specification file.

    This is usually done by selecting

    \menu{Microsoft Visual Studio 2005|Visual Studio Tools|<Command Prompt>}

    from the \gui Start menu.

    The actual commands needed to build Qt depends on your development

    system. For Microsoft Visual Studio to create the library and

    compile all the demos, examples, tools and tutorials type:

\snippet doc/src/snippets/code/doc_src_installation.qdoc 10

    \note If you later need to reconfigure and rebuild Qt from the

    same location, ensure that all traces of the previous configuration are

    removed by entering the build directory and typing \c{nmake distclean}

    before running \c configure again.

\o  That's all. Qt is now installed.

    If you are new to Qt, we suggest that you take a look at the demos

    and examples to see Qt in action. Run the Qt Examples and Demos

    either by typing \c qtdemo on the command line or through the

    desktop's Start menu.

    You might also want to try the following links:

    \list

    \o \l{How to Learn Qt}

    \o \l{Tutorials}

    \o \l{Developer Zone}

    \o \l{Deploying Qt Applications}

    \endlist

\endlist

    We hope you will enjoy using Qt. Good luck!

*/

/*! \page install-mac.html

\title Installing Qt on Mac OS X

\ingroup installation

\brief How to install Qt on Mac OS X.

\previouspage Installation

\note Qt for Mac OS X has some requirements that are given in more detail

in the \l{Qt for Mac OS X Requirements} document.

\bold{Note for the binary package}: If you have the binary package, simply double-click on the Qt.mpkg

and follow the instructions to install Qt. You can later run the \c{uninstall-qt.py}

script to uninstall the binary package. The script is located in /Developer/Tools and

must be run as root.

The following instructions describe how to install Qt from the source package.

\list 1

\o  If you have the commercial edition of Qt, install your license

    file as \c{$HOME/.qt-license}.

    For the open source version you do not need a license file.

\o  Unpack the archive if you have not done so already. For example,

    if you have the \c{qt-everywhere-opensource-src-%VERSION%.tar.gz}

    package, type the following commands at a command line prompt:

\snippet doc/src/snippets/code/doc_src_installation.qdoc 11

    This creates the directory \c{/tmp/qt-everywhere-opensource-src-%VERSION%}

    containing the files from the archive.

\o  Building

    To configure the Qt library for your machine type, run the

    \c{./configure} script in the package directory.

    By default, Qt is configured for installation in the

    \c{/usr/local/Trolltech/Qt-%VERSION%} directory, but this can be

    changed by using the \c{-prefix} option.

\snippet doc/src/snippets/code/doc_src_installation.qdoc 12

    Type \c{./configure -help} to get a list of all available options.

    Note that you will need to specify \c{-universal} if you want to

    build universal binaries, and also supply a path to the \c{-sdk}

    option if your development machine has a PowerPC CPU. By default,

    Qt is built as a framework, but you can built it as a set of

    dynamic libraries (dylibs) by specifying the \c{-no-framework}

    option.

    Qt can also be configured to be built with debugging symbols. This

    process is described in detail in the \l{Debugging Techniques}

    document.

    To create the library and compile all the demos, examples, tools,

    and tutorials, type:

\snippet doc/src/snippets/code/doc_src_installation.qdoc 13

    If \c{-prefix} is outside the build directory, you need to install

    the library, demos, examples, tools, and tutorials in the appropriate

    place. To do this, type:

\snippet doc/src/snippets/code/doc_src_installation.qdoc 14

    as root, if neccessary (note that this requires that you have administrator access

    to your machine).

    There is a potential race condition when running make install with multiple

    jobs. It is best to only run one make job (-j1) for the install.

    \bold{Note:} If you later need to reconfigure and rebuild Qt from the

    same location, ensure that all traces of the previous configuration are

    removed by entering the build directory and typing \c{make confclean}

    before running \c configure again.

\o  Environment variables

    In order to use Qt, some environment variables need to be

    extended.

\snippet doc/src/snippets/code/doc_src_installation.qdoc 15

    This is done like this:

    In \c{.profile} (if your shell is bash), add the following lines:

\snippet doc/src/snippets/code/doc_src_installation.qdoc 16

    In \c{.login} (in case your shell is csh or tcsh), add the following line:

\snippet doc/src/snippets/code/doc_src_installation.qdoc 17

    If you use a different shell, please modify your environment

    variables accordingly.

\o  That's all. Qt is now installed.

    If you are new to Qt, we suggest that you take a look at the demos

    and examples to see Qt in action. Run the Qt Examples and Demos

    either by typing \c qtdemo on the command line or through the

    desktop's Start menu.

    You might also want to try the following links:

    \list

    \o \l{How to Learn Qt}

    \o \l{Tutorials}

    \o \l{Developer Zone}

    \o \l{Deploying Qt Applications}

    \endlist

\endlist

    We hope you will enjoy using Qt. Good luck!

*/

/*! \page install-wince.html

\title Installing Qt on Windows CE

\ingroup installation

\ingroup qtce

\brief How to install Qt on Windows CE.

\previouspage Installation

\note Qt for Windows CE has some requirements that are given in more detail

in the \l{Qt for Windows CE Requirements} document.

\list 1

    \o  Uncompress the files into the directory you want to install Qt into;

        e.g., \c{C:\Qt\%VERSION%}.

        \note The install path must not contain any spaces.

    \o  Environment variables

        In order to build and use Qt, the \c PATH environment variable needs

        to be extended:

        \snippet doc/src/snippets/code/doc_src_installation.qdoc 18

        This is done by adding \c{c:\Qt\%VERSION%\bin} to the \c PATH variable.

        For newer versions of Windows, \c PATH can be extended through

        "Control Panel->System->Advanced->Environment variables" and for

        older versions by editing \c{c:\autoexec.bat}.

        Make sure the enviroment variables for your compiler are set.

        Visual Studio includes \c{vcvars32.bat} for that purpose - or simply

        use the "Visual Studio Command Prompt" from the Start menu.

    \o  Configuring Qt

        To configure Qt for Windows Mobile 5.0 for Pocket PC, type the

        following:

        \snippet doc/src/snippets/code/doc_src_installation.qdoc 19

        If you want to configure Qt for another platform or with other

        options, type \c{configure -help} to get a list of all available

        options. See the \c README file for the list of supported platforms.

    \o Building Qt

        Now, to build Qt you first have to update your \c PATH, \c INCLUDE

        and \c LIB paths to point to the correct resources for your target

        platforms. For a default installation of the Windows Mobile 5.0

        Pocket PC SDK, this is done with the following commands:

        \snippet doc/src/snippets/code/doc_src_installation.qdoc 20

        We provide a convenience script for this purpose, called \c{setcepaths}.

        Simply type:

        \snippet doc/src/snippets/code/doc_src_installation.qdoc 21

        Then to build Qt type:

        \snippet doc/src/snippets/code/doc_src_installation.qdoc 22

        \o  That's all. Qt is now installed.

        To get started with Qt, you can check out the examples found in the

        \c{examples} directory of your Qt installation. The documentation can

        be found in \c{doc\html}.

        \bold{Remember:} If you reconfigure Qt for a different platform,

        make sure you start with a new clean console to get rid of the

        platform dependent include directories.

        The links below provide further information for using Qt:

        \list

        \o \l{How to Learn Qt}

        \o \l{Tutorials}

        \o \l{Developer Zone}

        \o \l{Deploying Qt Applications}

        \endlist

        You might also want to try the following Windows CE specific links:

        \list

        \o \l{Windows CE - Introduction to using Qt}

        \o \l{Windows CE - Working with Custom SDKs}

        \o \l{Windows CE - Using shadow builds}

        \o \l{Windows CE - Signing}

        \endlist

        Information on feature and performance tuning for embedded builds can

        be found on the following pages:

        \list

        \o \l{Fine-Tuning Features in Qt}

        \o \l{Qt Performance Tuning}

        \endlist

\endlist

    We hope you will enjoy using Qt. Good luck!

*/

/*! \page install-Symbian-installer.html

\title Installing Qt on the Symbian platform from a Binary Package

\ingroup qtsymbian

\brief How to install Qt on the Symbian platform from a binary package.

\note Qt for the Symbian platform has some requirements that are given in more detail

in the \l{Qt for the Symbian platform Requirements} document.

\list 1

    \o  Install Qt

        Run \c{qt-symbian-opensource-%VERSION%.exe} and follow the instructions.

        \note Qt must be installed on the same drive as the Symbian SDK you are

        using, and the install path must not contain any spaces.

    \o  Install Qt into a device

        To run Qt applications on a device, \c{qt_installer.sis} found

        in the Qt installation directory must be first installed into the device.

        \c{Qt_installer.sis} contains Qt libraries and Open C libraries all in one

        convenient package.

        Begin installation by connecting your device via USB cable to a computer that

        has the \l{http://www.nokia.com/pcsuite}{Nokia PC Suite} installed.

        On the device, select "PC Suite mode". In Windows Explorer right click

        on the \c{qt_installer.sis} file, select "Install with Nokia Application

        Installer" and follow the instructions.

    \o  Running Qt demos

        We've included a subset of the Qt demos in this package for you

        to try out. An excellent starting point is the "fluidlauncher"