--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/qtmobility/src/bearer/qnetworksession.cpp Thu Apr 01 08:30:34 2010 +0300
@@ -0,0 +1,711 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
+**
+** This file is part of the Qt Mobility Components.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the Technology Preview License Agreement accompanying
+** this package.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file. Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain additional
+** rights. These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include <QEventLoop>
+#include <QTimer>
+
+#include "qnetworksession.h"
+
+#ifdef Q_OS_SYMBIAN
+#include "qnetworksession_s60_p.h"
+#elif Q_WS_MAEMO_6
+#include "qnetworksession_maemo_p.h"
+#else
+#include "qnetworksession_p.h"
+#endif
+
+QTM_BEGIN_NAMESPACE
+
+/*!
+ \class QNetworkSession
+
+ \brief The QNetworkSession class provides control over the system's access points
+ and enables session management for cases when multiple clients access the same access point.
+
+ \inmodule QtNetwork
+ \ingroup bearer
+
+ A QNetworkSession enables control over the system's network interfaces. The session's configuration
+ parameter are determined via the QNetworkConfiguration object to which it is bound. Depending on the
+ type of the session (single access point or service network) a session may be linked to one or more
+ network interfaces. By means of \l{open()}{opening} and \l{close()}{closing} of network sessions
+ a developer can start and stop the systems network interfaces. If the configuration represents
+ multiple access points (see \l QNetworkConfiguration::ServiceNetwork) more advanced features such as roaming may be supported.
+
+ QNetworkSession supports session management within the same process and depending on the platform's
+ capabilities may support out-of-process sessions. If the same
+ network configuration is used by multiple open sessions the underlying network interface is only terminated once
+ the last session has been closed.
+
+ \section1 Roaming
+
+ Applications may connect to the preferredConfigurationChanged() signal in order to
+ receive notifications when a more suitable access point becomes available.
+ In response to this signal the application must either initiate the roaming via migrate()
+ or ignore() the new access point. Once the session has roamed the
+ newConfigurationActivated() signal is emitted. The application may now test the
+ carrier and must either accept() or reject() it. The session will return to the previous
+ access point if the roaming was rejected. The subsequent state diagram depicts the required
+ state transitions.
+
+ \image roaming-states.png
+
+ Some platforms may distinguish forced roaming and application level roaming (ALR).
+ ALR implies that the application controls (via migrate(), ignore(), accept() and reject())
+ whether a network session can roam from one access point to the next. Such control is useful
+ if the application maintains stateful socket connections and wants to control the transition from
+ one interface to the next. Forced roaming implies that the system automatically roams to the next network without
+ consulting the application. This has the advantage that the application can make use of roaming features
+ without actually being aware of it. It is expected that the application detects that the underlying
+ socket is broken and automatically reconnects via the new network link.
+
+ If the platform supports both modes of roaming, an application indicates its preference
+ by connecting to the preferredConfigurationChanged() signal. Connecting to this signal means that
+ the application wants to take control over the roaming behavior and therefore implies application
+ level roaming. If the client does not connect to the preferredConfigurationChanged(), forced roaming
+ is used. If forced roaming is not supported the network session will not roam by default.
+
+ Some applications may want to suppress any form of roaming altogether. Possible use cases may be
+ high priority downloads or remote services which cannot handle a roaming enabled client. Clients
+ can suppress roaming by connecting to the preferredConfigurationChanged() signal and answer each
+ signal emission with ignore().
+
+ \sa QNetworkConfiguration, QNetworkConfigurationManager
+*/
+
+/*!
+ \enum QNetworkSession::State
+
+ This enum describes the connectivity state of the session. If the session is based on a
+ single access point configuration the state of the session is the same as the state of the
+ associated network interface.
+
+ \value Invalid The session is invalid due to an invalid configuration. This may
+ happen due to a removed access point or a configuration that was
+ invalid to begin with.
+ \value NotAvailable The session is based on a defined but not yet discovered QNetworkConfiguration
+ (see \l QNetworkConfiguration::StateFlag).
+ \value Connecting The network session is being established.
+ \value Connected The network session is connected. If the current process wishes to use this session
+ it has to register its interest by calling open(). A network session
+ is considered to be ready for socket operations if it isOpen() and connected.
+ \value Closing The network session is in the process of being shut down.
+ \value Disconnected The network session is not connected. The associated QNetworkConfiguration
+ has the state QNetworkConfiguration::Discovered.
+ \value Roaming The network session is roaming from one access point to another
+ access point.
+*/
+
+/*!
+ \enum QNetworkSession::SessionError
+
+ This enum describes the session errors that can occur.
+
+ \value UnknownSessionError An unidentified error occurred.
+ \value SessionAbortedError The session was aborted by the user or system.
+ \value RoamingError The session cannot roam to a new configuration.
+ \value OperationNotSupportedError The operation is not supported for current configuration.
+ \value InvalidConfigurationError The operation cannot currently be performed for the
+ current configuration.
+*/
+
+/*!
+ \fn void QNetworkSession::stateChanged(QNetworkSession::State state)
+
+ This signal is emitted whenever the state of the network session changes.
+ The \a state parameter is the new state.
+
+ \sa state()
+*/
+
+/*!
+ \fn void QNetworkSession::error(QNetworkSession::SessionError error)
+
+ This signal is emitted after an error occurred. The \a error parameter
+ describes the error that occurred.
+
+ \sa error(), errorString()
+*/
+
+/*!
+ \fn void QNetworkSession::preferredConfigurationChanged(const QNetworkConfiguration& config, bool isSeamless)
+
+ This signal is emitted when the preferred configuration/access point for the
+ session changes. Only sessions which are based on service network configurations
+ may emit this signal. \a config can be used to determine access point specific
+ details such as proxy settings and \a isSeamless indicates whether roaming will
+ break the sessions IP address.
+
+ As a consequence to this signal the application must either start the roaming process
+ by calling migrate() or choose to ignore() the new access point.
+
+ If the roaming process is non-seamless the IP address will change which means that
+ a socket becomes invalid. However seamless mobility can ensure that the local IP address
+ does not change. This is achieved by using a virtual IP address which is bound to the actual
+ link address. During the roaming process the virtual address is attached to the new link
+ address.
+
+ Some platforms may support the concept of Forced Roaming and Application Level Roaming (ALR).
+ Forced roaming implies that the platform may simply roam to a new configuration without
+ consulting applications. It is up to the application to detect the link layer loss and reestablish
+ its sockets. In contrast ALR provides the opportunity to prevent the system from roaming.
+ If this session is based on a configuration that supports roaming the application can choose
+ whether it wants to be consulted (ALR use case) by connecting to this signal. For as long as this signal
+ connection remains the session remains registered as a roaming stakeholder; otherwise roaming will
+ be enforced by the platform.
+
+ \sa migrate(), ignore(), QNetworkConfiguration::isRoamingAvailable()
+*/
+
+/*!
+ \fn void QNetworkSession::newConfigurationActivated()
+
+ This signal is emitted once the session has roamed to the new access point.
+ The application may reopen its socket and test the suitability of the new network link.
+ Subsequently it must either accept() or reject() the new access point.
+
+ \sa accept(), reject()
+*/
+
+/*!
+ \fn void QNetworkSession::opened()
+
+ This signal is emitted when the network session has been opened.
+
+ The underlying network interface will not be shut down as long as the session remains open.
+ Note that this feature is dependent on \l{QNetworkConfigurationManager::SystemSessionSupport}{system wide session support}.
+*/
+
+/*!
+ \fn void QNetworkSession::closed()
+
+ This signal is emitted when the network session has been closed.
+*/
+
+/*!
+ Constructs a session based on \a connectionConfig with the given \a parent.
+
+ \sa QNetworkConfiguration
+*/
+QNetworkSession::QNetworkSession(const QNetworkConfiguration& connectionConfig, QObject* parent)
+ : QObject(parent)
+{
+ d = new QNetworkSessionPrivate;
+ d->q = this;
+ d->publicConfig = connectionConfig;
+ d->syncStateWithInterface();
+ QObject::connect(d, SIGNAL(quitPendingWaitsForOpened()),
+ this, SIGNAL(opened()));
+}
+
+/*!
+ Frees the resources associated with the QNetworkSession object.
+*/
+QNetworkSession::~QNetworkSession()
+{
+ delete d;
+}
+
+/*!
+ Creates an open session which increases the session counter on the underlying network interface.
+ The system will not terminate a network interface until the session reference counter reaches zero.
+ Therefore an open session allows an application to register its use of the interface.
+
+ As a result of calling open() the interface will be started if it is not connected/up yet.
+ Some platforms may not provide support for out-of-process sessions. On such platforms the session
+ counter ignores any sessions held by another process. The platform capabilities can be
+ detected via QNetworkConfigurationManager::capabilities().
+
+ Note that this call is asynchronous. Depending on the outcome of this call the results can be enquired
+ by connecting to the stateChanged(), opened() or error() signals.
+
+ It is not a requirement to open a session in order to monitor the underlying network interface.
+
+ \sa close(), stop(), isOpen()
+*/
+void QNetworkSession::open()
+{
+ d->open();
+}
+
+/*!
+ Waits until the session has been opened, up to \a msecs milliseconds. If the session has been opened, this
+ function returns true; otherwise it returns false. In the case where it returns false, you can call error()
+ to determine the cause of the error.
+
+ The following example waits up to one second for the session to be opened:
+
+ \code
+ session->open();
+ if (session->waitForOpened(1000))
+ qDebug("Open!");
+ \endcode
+
+ If \a msecs is -1, this function will not time out.
+
+ \sa open(), error()
+*/
+bool QNetworkSession::waitForOpened(int msecs)
+{
+ if (d->isOpen)
+ return true;
+
+ if (d->state != Connecting)
+ return false;
+
+ QEventLoop* loop = new QEventLoop(this);
+ QObject::connect(d, SIGNAL(quitPendingWaitsForOpened()),
+ loop, SLOT(quit()));
+ QObject::connect(this, SIGNAL(error(QNetworkSession::SessionError)),
+ loop, SLOT(quit()));
+
+ //final call
+ if (msecs>=0)
+ QTimer::singleShot(msecs, loop, SLOT(quit()));
+
+ loop->exec();
+ loop->disconnect();
+ loop->deleteLater();
+
+ return d->isOpen;
+}
+
+/*!
+ Decreases the session counter on the associated network configuration. If the session counter reaches zero
+ the active network interface is shut down. This also means that state() will only change from \l Connected to
+ \l Disconnected if the current session was the last open session.
+
+ If the platform does not support out-of-process sessions calling this function does not stop the
+ interface. In this case \l{stop()} has to be used to force a shut down.
+ The platform capabilities can be detected via QNetworkConfigurationManager::capabilities().
+
+ Note that this call is asynchronous. Depending on the outcome of this call the results can be enquired
+ by connecting to the stateChanged(), opened() or error() signals.
+
+ \sa open(), stop(), isOpen()
+*/
+void QNetworkSession::close()
+{
+ d->close();
+}
+
+/*!
+ Invalidates all open sessions against the network interface and therefore stops the
+ underlying network interface. This function always changes the session's state() flag to
+ \l Disconnected.
+
+ On Symbian platform, a 'NetworkControl' capability is required for
+ full interface-level stop (without the capability, only the current session is stopped).
+
+ \sa open(), close()
+*/
+void QNetworkSession::stop()
+{
+ d->stop();
+}
+
+/*!
+ Returns the QNetworkConfiguration that this network session object is based on.
+
+ \sa QNetworkConfiguration
+*/
+QNetworkConfiguration QNetworkSession::configuration() const
+{
+ return d->publicConfig;
+}
+
+/*
+ Returns the type of bearer currently used by this session. The string is not translated and
+ therefore can not be shown to the user. The subsequent table presents the currently known
+ bearer types:
+
+ \table
+ \header
+ \o Value
+ \o Description
+ \row
+ \o Unknown
+ \o The session is based on an unknown or unspecified bearer type.
+ \row
+ \o Ethernet
+ \o The session is based on Ethernet.
+ \row
+ \o WLAN
+ \o The session is based on Wireless LAN.
+ \row
+ \o 2G
+ \o The session uses CSD, GPRS, HSCSD, EDGE or cdmaOne.
+ \row
+ \o CDMA2000
+ \o The session uses CDMA.
+ \row
+ \o WCDMA
+ \o The session uses W-CDMA/UMTS.
+ \row
+ \o HSPA
+ \o The session uses High Speed Packet Access.
+ \row
+ \o Bluetooth
+ \o The session uses Bluetooth.
+ \row
+ \o WiMAX
+ \o The session uses WiMAX.
+ \endtable
+
+ If the session is based on a network configuration of type
+ \l QNetworkConfiguration::ServiceNetwork the type of the preferred or currently
+ active configuration is returned. Therefore the bearer type may change
+ over time.
+
+ This function returns an empty string if this session is based on an invalid configuration, or
+ a network configuration of type \l QNetworkConfiguration::ServiceNetwork with no
+ \l {QNetworkConfiguration::children()}{children}.
+*/
+/*QString QNetworkSession::bearerName() const
+{
+ return d->bearerName();
+}*/
+
+/*!
+ Returns the network interface that is used by this session.
+
+ This function only returns a valid QNetworkInterface when this session is \l Connected.
+
+ The returned interface may change as a result of a roaming process.
+
+ Note: this function does not work in Symbian emulator due to the way the
+ connectivity is emulated on Windows.
+
+ \sa state()
+*/
+QNetworkInterface QNetworkSession::interface() const
+{
+ return d->currentInterface();
+}
+
+/*!
+ Returns true if this session is open. If the number of all open sessions is greater than
+ zero the underlying network interface will remain connected/up.
+
+ The session can be controlled via open() and close().
+*/
+bool QNetworkSession::isOpen() const
+{
+ return d->isOpen;
+}
+
+/*!
+ Returns the state of the session.
+
+ If the session is based on a single access point configuration the state of the
+ session is the same as the state of the associated network interface. Therefore
+ a network session object can be used to monitor network interfaces.
+
+ A \l QNetworkConfiguration::ServiceNetwork based session summarizes the state of all its children
+ and therefore returns the \l Connected state if at least one of the service network's
+ \l {QNetworkConfiguration::children()}{children()} configurations is active.
+
+ Note that it is not required to hold an open session in order to obtain the network interface state.
+ A connected but closed session may be used to monitor network interfaces whereas an open and connected
+ session object may prevent the network interface from being shut down.
+
+ \sa error(), stateChanged()
+*/
+QNetworkSession::State QNetworkSession::state() const
+{
+ return d->state;
+}
+
+/*!
+ Returns the type of error that last occurred.
+
+ \sa state(), errorString()
+*/
+QNetworkSession::SessionError QNetworkSession::error() const
+{
+ return d->error();
+}
+
+/*!
+ Returns a human-readable description of the last device error that
+ occurred.
+
+ \sa error()
+*/
+QString QNetworkSession::errorString() const
+{
+ return d->errorString();
+}
+
+/*!
+ Returns the value for property \a key.
+
+ A network session can have properties attached which may describe the session in more details.
+ This function can be used to gain access to those properties.
+
+ The following property keys are guaranteed to be specified on all platforms:
+
+ \table
+ \header
+ \o Key \o Description
+ \row
+ \o ActiveConfiguration
+ \o If the session \l isOpen() this property returns the identifier of the
+ QNetworkConfiguration that is used by this session; otherwise an empty string.
+
+ The main purpose of this key is to determine which Internet access point is used
+ if the session is based on a \l{QNetworkConfiguration::ServiceNetwork}{ServiceNetwork}.
+ The following code snippet highlights the difference:
+ \code
+ QNetworkConfigurationManager mgr;
+ QNetworkConfiguration ap = mgr.defaultConfiguration();
+ QNetworkSession* session = new QNetworkSession(ap);
+ ... //code activates session
+
+ QString ident = session->sessionProperty("ActiveConfiguration").toString();
+ if ( ap.type() == QNetworkConfiguration::ServiceNetwork ) {
+ Q_ASSERT( ap.identifier() != ident );
+ Q_ASSERT( ap.children().contains( mgr.configurationFromIdentifier(ident) ) );
+ } else if ( ap.type() == QNetworkConfiguration::InternetAccessPoint ) {
+ Q_ASSERT( ap.identifier() == ident );
+ }
+ \endcode
+ \row
+ \o UserChoiceConfiguration
+ \o If the session \l isOpen() and is bound to a QNetworkConfiguration of type
+ UserChoice, this property returns the identifier of the QNetworkConfiguration that the
+ configuration resolved to when \l open() was called; otherwise an empty string.
+
+ The purpose of this key is to determine the real QNetworkConfiguration that the
+ session is using. This key is different to \i ActiveConfiguration in that
+ this key may return an identifier for either a
+ \l {QNetworkConfiguration::ServiceNetwork}{service network} or a
+ \l {QNetworkConfiguration::InternetAccessPoint}{Internet access points} configurations
+ whereas \i ActiveConfiguration always returns identifiers to
+ \l {QNetworkConfiguration::InternetAccessPoint}{Internet access points} configurations.
+ \row
+ \o ConnectInBackground
+ \o Setting this property to \i true before calling \l open() implies that the connection attempt
+ is made but if no connection can be established, the user is not connsulted and asked to select
+ a suitable connection. This property is not set by default and support for it depends on the platform.
+ \endtable
+*/
+QVariant QNetworkSession::sessionProperty(const QString& key) const
+{
+ if (!d->publicConfig.isValid())
+ return QVariant();
+
+ if (key == "ActiveConfiguration") {
+ if (!d->isOpen)
+ return QString();
+ else
+ return d->activeConfig.identifier();
+ }
+
+ if (key == "UserChoiceConfiguration") {
+ if (!d->isOpen || d->publicConfig.type() != QNetworkConfiguration::UserChoice)
+ return QString();
+
+ if (d->serviceConfig.isValid())
+ return d->serviceConfig.identifier();
+ else
+ return d->activeConfig.identifier();
+ }
+
+ return d->sessionProperty(key);
+}
+
+/*!
+ Sets the property \a value on the session. The property is identified using
+ \a key. Removing an already set property can be achieved by passing an
+ invalid QVariant.
+
+ Note that the \i UserChoiceConfiguration and \i ActiveConfiguration
+ properties are read only and cannot be changed using this method.
+*/
+void QNetworkSession::setSessionProperty(const QString& key, const QVariant& value)
+{
+ if (key == "ActiveConfiguration"
+ || key == "UserChoiceConfiguration")
+ return;
+
+ d->setSessionProperty(key, value);
+}
+
+/*!
+ Instructs the session to roam to the new access point. The old access point remains active
+ until the application calls accept().
+
+ The newConfigurationActivated() signal is emitted once roaming has been completed.
+
+ \sa accept()
+*/
+void QNetworkSession::migrate()
+{
+ d->migrate();
+}
+
+/*!
+ This function indicates that the application does not wish to roam the session.
+
+ \sa migrate()
+*/
+void QNetworkSession::ignore()
+{
+ // Needed on at least Symbian platform: the roaming must be explicitly
+ // ignore()'d or migrate()'d
+ d->ignore();
+}
+
+/*!
+ Instructs the session to permanently accept the new access point. Once this function
+ has been called the session may not return to the old access point.
+
+ The old access point may be closed in the process if there are no other network sessions for it.
+ Therefore any open socket that still uses the old access point
+ may become unusable and should be closed before completing the migration.
+*/
+void QNetworkSession::accept()
+{
+ d->accept();
+}
+
+/*!
+ The new access point is not suitable for the application. By calling this function the
+ session returns to the previous access point/configuration. This action may invalidate
+ any socket that has been created via the not desired access point.
+
+ \sa accept()
+*/
+void QNetworkSession::reject()
+{
+ d->reject();
+}
+
+
+/*!
+ Returns the amount of data sent in bytes; otherwise 0.
+
+ This field value includes the usage across all open network
+ sessions which use the same network interface.
+
+ If the session is based on a service network configuration the number of
+ sent bytes across all active member configurations are returned.
+
+ This function may not always be supported on all platforms and returns
+ 0. The platform capability can be detected via QNetworkConfigurationManager::DataStatistics.
+*/
+quint64 QNetworkSession::bytesWritten() const
+{
+ return d->bytesWritten();
+}
+
+/*!
+ Returns the amount of data received in bytes; otherwise 0.
+
+ This field value includes the usage across all open network
+ sessions which use the same network interface.
+
+ If the session is based on a service network configuration the number of
+ sent bytes across all active member configurations are returned.
+
+ This function may not always be supported on all platforms and returns
+ 0. The platform capability can be detected via QNetworkConfigurationManager::DataStatistics.
+*/
+quint64 QNetworkSession::bytesReceived() const
+{
+ return d->bytesReceived();
+}
+
+/*!
+ Returns the number of seconds that the session has been active.
+*/
+quint64 QNetworkSession::activeTime() const
+{
+ return d->activeTime();
+}
+
+/*!
+ \internal
+
+ This function is required to detect whether the client wants to control
+ the roaming process. If he connects to preferredConfigurationChanged() signal
+ he intends to influence it. Otherwise QNetworkSession always roams
+ without registering this session as a stakeholder in the roaming process.
+
+ For more details check the Forced vs ALR roaming section in the QNetworkSession
+ class description.
+*/
+void QNetworkSession::connectNotify(const char *signal)
+{
+ QObject::connectNotify(signal);
+ //check for preferredConfigurationChanged() signal connect notification
+ //This is not required on all platforms
+#ifdef Q_OS_SYMBIAN
+ if (qstrcmp(signal, SIGNAL(preferredConfigurationChanged(QNetworkConfiguration,bool))) == 0) {
+ d->setALREnabled(true);
+ }
+#endif
+}
+
+/*!
+ \internal
+
+ This function is called when the client disconnects from the preferredConfigurationChanged()
+ signal.
+
+ \sa connectNotify()
+*/
+void QNetworkSession::disconnectNotify(const char *signal)
+{
+ QObject::disconnectNotify(signal);
+ //check for preferredConfigurationChanged() signal disconnect notification
+ //This is not required on all platforms
+#ifdef Q_OS_SYMBIAN
+ if (qstrcmp(signal, SIGNAL(preferredConfigurationChanged(QNetworkConfiguration,bool))) == 0) {
+ d->setALREnabled(false);
+ }
+#endif
+}
+
+#include "moc_qnetworksession.cpp"
+
+QTM_END_NAMESPACE