// Copyright (c) 2004-2010 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

//

RUN_SCRIPT z:\TestData\Scripts\TE_smsprt_setup.script

LOAD_SUITE TE_smsprt -SharedData

//!@file

START_TESTCASE SMS-GSMU-0046

//!@SYMTestCaseID SMS-GSMU-0046	

//!@SYMFssID CR0205	

//!@SYMTestPriority Critical

//!@SYMTestCaseDesc Send single 7 bit PDU with TP-SRR status report scheme.

//!@SYMTestActions

//1. Mark the heap

//2. Create the message with test data (2)

//3. Set the scheme to TSmsStatusReportScheme::ETPSRRScheme

//4. Set Default to zero and set the last segment

//5. Send the message

//6. Check request completes with KErrNone 

//7. Delete the message.

//8. Unmark the heap

//!@SYMTestExpectedResults The message is sent successfully and SIMTSY has verified the format and correctness of the PDU - that it contains TP-SRR bit set, PDU = PDU (3).

RUN_TEST_STEP  100 TE_smsprt TestSendingTPSRRSchemeInAllPDUs z:\testdata\configs\te_statusReportScheme.ini Send7BitTPSRRSchemeSinglePDU

END_TESTCASE SMS-GSMU-0046

START_TESTCASE SMS-GSMU-0047

//!@SYMTestCaseID SMS-GSMU-0047	

//!@SYMFssID CR0205	

//!@SYMTestPriority Critical

//!@SYMTestCaseDesc Send single 8 bit PDU with TP-SRR status report scheme.

//!@SYMTestActions

//1. Mark the heap

//2. Create the message with test data (3)

//3. Set the scheme to TSmsStatusReportScheme::ETPSRRScheme

//4. Set Default to zero and set the last segment

//5. Send the message

//6. Check request completes with KErrNone 

//7. Delete the message.

//8. Unmark the heap

//!@SYMTestExpectedResults The message is sent successfully and SIMTSY has verified the format and correctness of the PDU - that it contains TP-SRR bit set, PDU = PDU (803).

RUN_TEST_STEP  100 TE_smsprt TestSendingTPSRRSchemeInAllPDUs z:\testdata\configs\te_statusReportScheme.ini Send8BitTPSRRSchemeSinglePDU

END_TESTCASE SMS-GSMU-0047

START_TESTCASE SMS-GSMU-0059

//!@SYMTestCaseID SMS-GSMU-0059	

//!@SYMFssID CR0205	

//!@SYMTestPriority Critical

//!@SYMTestCaseDesc Send 7 bit multiple PDU message with TP-SRR status report scheme set in all segments.

//!@SYMTestActions

//1. Mark the heap

//2. Create the message with test data (4)

//3. Set default to zero and set scheme TSmsStatusReportScheme::ETPSRRScheme in every segment

//4. Send the message

//5. Check request completes KErrNone 

//6. Delete the message

//7. Unmark the heap

//!@SYMTestExpectedResults The message is verified by SimTSY that it contains TP-SRR bit set in every segment which = PDU (29-31).

RUN_TEST_STEP  100 TE_smsprt TestSendingTPSRRSchemeInAllPDUs z:\testdata\configs\te_statusReportScheme.ini Send7BitTPSRRSchemeMultiplePDU

END_TESTCASE SMS-GSMU-0059

START_TESTCASE SMS-GSMU-0060

//!@SYMTestCaseID SMS-GSMU-0060	

//!@SYMFssID CR0205	

//!@SYMTestPriority Critical

//!@SYMTestCaseDesc Send 8 bit multiple PDU message with TP-SRR status report scheme set in all segments.

//!@SYMTestActions

//1. Mark the heap

//2. Create the message with test data (4)

//3. Set default to zero and set scheme TSmsStatusReportScheme::ETPSRRScheme in every segment

//4. Send the message

//5. Check request completes KErrNone 

//6. Delete the message

//7. Unmark the heap

//!@SYMTestExpectedResults The message is verified by SimTSY that it contains TP-SRR bit set in every segment which = PDU (829-831).

RUN_TEST_STEP  100 TE_smsprt TestSendingTPSRRSchemeInAllPDUs z:\testdata\configs\te_statusReportScheme.ini Send8BitTPSRRSchemeMultiplePDU

END_TESTCASE SMS-GSMU-0060

START_TESTCASE SMS-GSMU-0067

//!@SYMTestCaseID SMS-GSMU-0067

//!@SYMFssID CR0205	

//!@SYMTestPriority Critical

//!@SYMTestCaseDesc Send 7 bit multiple PDU message with TP-SRR scheme set in only the last PDU.

//!@SYMTestActions

//1. Mark the heap

//2. Create the message with test data (4)

//3. Set scheme to TSmsStatusReportScheme::ETPSRRScheme and set default to zero.

//4. Set TP-SRR for last segment only.

//5. Send the message and check request completes KErrNone 

//6. Delete the message

//7. Unmark the heap

//!@SYMTestExpectedResults The message sent is verified by SimTSY, PDUs = PDU(41-43) that it contains TP-SRR scheme set only in last segment.

RUN_TEST_STEP  100 TE_smsprt TestSendingTPSRRSchemeInLastPDU z:\testdata\configs\te_statusReportScheme.ini Send7BitTPSRRSchemeLastPDU

END_TESTCASE SMS-GSMU-0067

START_TESTCASE SMS-GSMU-0068

//!@SYMTestCaseID SMS-GSMU-0068	

//!@SYMFssID CR0205	

//!@SYMTestPriority Critical

//!@SYMTestCaseDesc Send 8 bit multiple PDU message with TP-SRR scheme set in only the last PDU.

//!@SYMTestActions

//1. Mark the heap

//2. Create the message with test data (4)

//3. Set scheme to TSmsStatusReportScheme::ETPSRRScheme and set default to zero. 

//4. Use function which sets the last segment.

//5. Set TP-SRR for last segment only.

//6. Send the message and check request completes KErrNone 

//7. Delete the message

//8. Unmark the heap

//!@SYMTestExpectedResults The message sent is verified by SimTSY, PDUs = PDU(841-843) that it contains TP-SRR scheme set only in last segment.

RUN_TEST_STEP  100 TE_smsprt TestSendingTPSRRSchemeInLastPDU z:\testdata\configs\te_statusReportScheme.ini Send8BitTPSRRSchemeLastPDU

// -------------------------------------------------------------------------------------------------------

END_TESTCASE SMS-GSMU-0068

START_TESTCASE SMS-GSMU-0092

//!@SYMTestCaseID SMS-GSMU-0092	

//!@SYMFssID CR0205	

//!@SYMTestPriority Critical

//!@SYMTestCaseDesc Receive a “completed” status report for a TP-SRR scheme in a single 8bit PDU message.    

//!@SYMTestActions

//1. Mark the heap

//2. Create SMS message with test data (3) and with TP-SRR scheme set (1).

//3. Send the message and check request completes KErrNone 

//4. Delete the message

//5. Receive completed status report - PDU(103)

//6. Unmark the heap

//!@SYMTestExpectedResults A notification isn’t received after sending the message. The received status report generates a notification.

RUN_TEST_STEP  100 TE_smsprt TestReceivingLastTPSRR z:\testdata\configs\te_statusReportScheme.ini ReceiveStatusReportCompletedSinglePDU

END_TESTCASE SMS-GSMU-0092

START_TESTCASE SMS-GSMU-0093

//!@SYMTestCaseID SMS-GSMU-0093	

//!@SYMFssID CR0205	

//!@SYMTestPriority Critical

//!@SYMTestCaseDesc Receive “permanent failure” status report for a TP-SRR scheme in a single 8 bit PDU message.  

//!@SYMTestActions

//1. Mark the heap

//2. Create SMS message with test data (3) and with TP-SRR scheme set (1).

//3. Send the message and check request completes KErrNone 

//4. Delete the message

//5. Receive permanent failure status report - PDU(104)

//6. Unmark the heap

//!@SYMTestExpectedResults A notification isn’t received after sending the message. The received status report generates a notification.

RUN_TEST_STEP  100 TE_smsprt TestReceivingTPSRRAllPDU z:\testdata\configs\te_statusReportScheme.ini ReceiveStatusReportPermanentFailureSinglePDU

END_TESTCASE SMS-GSMU-0093

START_TESTCASE SMS-GSMU-0094

//!@SYMTestCaseID SMS-GSMU-0094	

//!@SYMFssID CR0205	

//!@SYMTestPriority Critical

//!@SYMTestCaseDesc Receive “temporary failure” status report and then a “completed” for a TP-SRR scheme in a single 8 bit PDU message.

//!@SYMTestActions

//1. Mark the heap

//2. Create SMS message with test data (3) and with TP-SRR scheme set (1).

//3. Send the message and check request completes KErrNone 

//4. Delete the message

//5. Receive temporary failure status report - PDU(105)

//6. Receive completed status report - PDU(106)

//7. Unmark the heap

//!@SYMTestExpectedResults A notification isn’t received after sending or after receiving the temporary failure.  However, a notification is generated after receiving the completed status report.

RUN_TEST_STEP  100 TE_smsprt TestReceivingLastTPSRR z:\testdata\configs\te_statusReportScheme.ini TemporyFailureCompletedSinglePDU

END_TESTCASE SMS-GSMU-0094

START_TESTCASE SMS-GSMU-0095

//!@SYMTestCaseID SMS-GSMU-0095	

//!@SYMFssID CR0205	

//!@SYMTestPriority Critical

//!@SYMTestCaseDesc Receive “temporary failure” status report and then a “permanent failure” for a TP-SRR scheme in a single 8 bit PDU message.  

//!@SYMTestActions

//1. Mark the heap

//2. Create SMS message with test data (3) and with TP-SRR scheme set (1).

//3. Send the message and check request completes KErrNone 

//4. Delete the message

//5. Receive temporary failure status report - PDU(107)

//6. Receive completed status report - PDU(108)

//7. Unmark the heap

//!@SYMTestExpectedResults A notification isn’t received after sending or after receiving the temporary failure.  However, a notification is generated after receiving the permanent failure status report.

RUN_TEST_STEP  100 TE_smsprt TestReceivingLastTPSRR z:\testdata\configs\te_statusReportScheme.ini TemporyFailurePermanentFailureSinglePDU

END_TESTCASE SMS-GSMU-0095

START_TESTCASE SMS-GSMU-0097

//!@SYMTestCaseID SMS-GSMU-0097	

//!@SYMFssID CR0205	

//!@SYMTestPriority Critical

//!@SYMTestCaseDesc Receive “completed” status reports for a multiple 8 bit PDU message with TP-SRR set in every PDU in this order: third,second,first.

//!@SYMTestActions

//1. Mark the heap

//2. Create SMS message with test data (4) and with TP-SRR scheme set in every PDU.

//3. Send the message and check request completes KErrNone 

//4. Delete the message

//5. Receive completed status report for third PDU - PDU(112)

//6. Receive completed status report for second PDU - PDU(111)

//7. Receive completed status report for first PDU - PDU(110)

//8. Unmark the heap

//!@SYMTestExpectedResults A notification isn’t received after sending. The status reports received are logged and a notification is generated on receiving PDU(110).

RUN_TEST_STEP  100 TE_smsprt TestReceivingTPSRRAllPDU z:\testdata\configs\te_statusReportScheme.ini MultipeStatusReportsCompletedOrderThirdSecondFirst

END_TESTCASE SMS-GSMU-0097

START_TESTCASE SMS-GSMU-0098

//!@SYMTestCaseID SMS-GSMU-0098	

//!@SYMFssID CR0205	

//!@SYMTestPriority Critical

//!@SYMTestCaseDesc Receive “completed” status reports for a multiple 8 bit PDU message with TP-SRR set in every PDU in this order: first, second, third.

//!@SYMTestActions

//1. Mark the heap

//2. Create SMS message with test data (4) and with TP-SRR scheme set in every PDU.

//3. Send the message and check request completes KErrNone 

//4. Delete the message

//5. Receive completed status report for first PDU - PDU(113)

//6. Receive completed status report for second PDU - PDU(114)

//7. Receive completed status report for third PDU - PDU(115)

//8. Unmark the heap

//!@SYMTestExpectedResults A notification isn’t received after sending. The status reports received are logged and a notification is generated on receiving PDU(115).

RUN_TEST_STEP  100 TE_smsprt TestReceivingTPSRRAllPDU z:\testdata\configs\te_statusReportScheme.ini MultipeStatusReportsCompletedOrderFirstSecondThird

END_TESTCASE SMS-GSMU-0098

START_TESTCASE SMS-GSMU-0099

//!@SYMTestCaseID SMS-GSMU-0099	

//!@SYMFssID CR0205	

//!@SYMTestPriority Critical

//!@SYMTestCaseDesc Receive “completed” and “temporary failure” status reports for a multiple 8 bit PDU message with TP-SRR set in every PDU.

//!@SYMTestActions

//1. Mark the heap

//2. Create SMS message with test data (4) and with TP-SRR scheme set in every PDU.

//3. Send the message and check request completes KErrNone 

//4. Delete the message

//5. Receive completed status report for first PDU - PDU(116)

//6. Receive temporary status report for third PDU - PDU(117)

//7. Receive completed status report for second PDU - PDU(118)

//8. Receive completed status report for third PDU - PDU(119)

//9. Unmark the heap

//!@SYMTestExpectedResults A notification isn’t received after sending. The status reports received are logged and a notification is only generated on receiving PDU(119).

RUN_TEST_STEP  100 TE_smsprt TestReceivingTPSRRAllPDU z:\testdata\configs\te_statusReportScheme.ini MultipeStatusReportsTemporyFailureOnThird

END_TESTCASE SMS-GSMU-0099

START_TESTCASE SMS-GSMU-0100

//!@SYMTestCaseID SMS-GSMU-0100	

//!@SYMFssID CR0205	

//!@SYMTestPriority Critical

//!@SYMTestCaseDesc Receive “completed” status reports for a multiple 8 bit PDU message with TP-SRR set in last PDU only.

//!@SYMTestActions

//1. Mark the heap

//2. Create SMS message with test data (4) and TP-SRR set in last segment.

//3. Send the message and check request completes KErrNone 

//4. Delete the message

//5. Receive completed status report for last PDU - PDU(120)

//6. Unmark the heap

//!@SYMTestExpectedResults A notification isn’t received after sending. The status report received is logged and a notification is generated on receiving it.

RUN_TEST_STEP  100 TE_smsprt TestReceivingLastTPSRR z:\testdata\configs\te_statusReportScheme.ini SingleStatusReportCompletedLastOnly

END_TESTCASE SMS-GSMU-0100

START_TESTCASE SMS-GSMU-0101

//!@SYMTestCaseID SMS-GSMU-0101	

//!@SYMFssID CR0205	

//!@SYMTestPriority Critical

//!@SYMTestCaseDesc Receive “temporary failure” and “completed” status reports for the last PDU of a multiple 8 bit PDU message with TP-SRR set in last segment only.

//!@SYMTestActions

//1. Mark the heap

//2. Create SMS message with test data (4) and TP-SRR set in last segment.

//3. Send the message and check request completes KErrNone 

//4. Delete the message

//5. Receive temporary status report for last PDU - PDU(121)

//6. Receive completed status report for last PDU - PDU(122)

//7. Unmark the heap

//!@SYMTestExpectedResults A notification is only received on receiving PDU(122).

RUN_TEST_STEP  100 TE_smsprt TestReceivingLastTPSRR z:\testdata\configs\te_statusReportScheme.ini SingleStatusReportTemporaryFailureThenCompletedLastOnly

END_TESTCASE SMS-GSMU-0101

START_TESTCASE SMS-GSMU-0102

//!@SYMTestCaseID SMS-GSMU-0102	

//!@SYMFssID CR0205	

//!@SYMTestPriority Critical

//!@SYMTestCaseDesc Receive “permanent failure” status report for the last PDU of a multiple 8 bit PDU message with TP-SRR set in last segment only.

//!@SYMTestActions

//1. Mark the heap

//2. Create SMS message with test data (4) and TP-SRR set in last segment.

//3. Send the message and check request completes KErrNone 

//4. Delete the message

//5. Receive completed status report for last PDU - PDU(123)

//6. Unmark the heap

//!@SYMTestExpectedResults A notification isn’t received after sending. The status report received is logged and a notification is generated on receiving it.

RUN_TEST_STEP  100 TE_smsprt TestReceivingLastTPSRR z:\testdata\configs\te_statusReportScheme.ini SingleStatusReportPermanentFailureLastPDUOnly

END_TESTCASE SMS-GSMU-0102

START_TESTCASE SMS-GSMU-0103

//!@SYMTestCaseID SMS-GSMU-0103	

//!@SYMFssID CR0205	

//!@SYMTestPriority Critical

//!@SYMTestCaseDesc Receive “temporary failure” and “permanent failure” status reports for the last PDU of a multiple 8 bit PDU message with TP-SRR set in last segment only.

//!@SYMTestActions

//1. Mark the heap

//2. Create SMS message with test data (4) and TP-SRR set in last segment.

//3. Send the message and check request completes KErrNone 

//4. Delete the message

//5. Receive temporary status report for last PDU - PDU(124)

//6. Receive permanent failure status report for last PDU - PDU(125)

//7. Unmark the heap

//!@SYMTestExpectedResults A notification is only received on receiving PDU(125).

RUN_TEST_STEP  100 TE_smsprt TestReceivingLastTPSRR z:\testdata\configs\te_statusReportScheme.ini SingleStatusReportTemporaryFailureThenPermanentFailureLastOnly

END_TESTCASE SMS-GSMU-0103

START_TESTCASE SMS-GSMU-0104

//!@SYMTestCaseID SMS-GSMU-0104	

//!@SYMFssID CR0205	

//!@SYMTestPriority Critical

//!@SYMTestCaseDesc Receive “completed” status reports for the first and last PDU of a multiple 8 bit PDU message with TP-SRR set in last segment only.

//!@SYMTestActions

//1. Mark the heap

//2. Create SMS message with test data (4) and TP-SRR set in last segment.

//3. Send the message and check request completes KErrNone 

//4. Delete the message

//5. Receive completed status report for first PDU - PDU(126)

//6. Receive completed status report for last PDU - PDU(127)

//7. Unmark the heap

//!@SYMTestExpectedResults A notification is only received on receiving PDU(127).

RUN_TEST_STEP  100 TE_smsprt TestReceivingLastTPSRR z:\testdata\configs\te_statusReportScheme.ini CompletedStatusReportForFirstAndThirdPDUSetForLastOnly

END_TESTCASE SMS-GSMU-0104

START_TESTCASE SMS-GSMU-0107

//!@SYMTestCaseID SMS-GSMU-0107	

//!@SYMFssID CR0205	

//!@SYMTestPriority High

//!@SYMTestCaseDesc Receive a "completed" status report for a SMSC scheme in a single 8bit PDU message set with value 0x01.    

//!@SYMTestActions

//1. Mark the heap

//2. Create SMS message with test data (3) and with SMSC scheme with value 0x01.

//3. Send the message and check request completes KErrNone 

//4. Delete the message

//5. Receive "completed" status report - PDU(131)

//6. Unmark the heap

//!@SYMTestExpectedResults A notification isn't received after sending the message. The received status report generates a notification.

RUN_TEST_STEP  100 TE_smsprt TestReceivingLastSMSC z:\testdata\configs\te_statusReportScheme.ini ReceiveStatusReportForSinglePDUSMSCLastPDU

END_TESTCASE SMS-GSMU-0107

START_TESTCASE SMS-GSMU-0108

//!@SYMTestCaseID SMS-GSMU-0108	

//!@SYMFssID CR0205	

//!@SYMTestPriority High

//!@SYMTestCaseDesc Receive a "permanent failure" status report for a SMSC scheme in a single 8bit PDU message set with value 0x01.    

//!@SYMTestActions

//1. Mark the heap

//2. Create SMS message with test data (3) and with SMSC scheme with value 0x01.

//3. Send the message and check request completes KErrNone 

//4. Delete the message

//5. Receive "permanent failure" status report - PDU(132)

//6. Unmark the heap

//!@SYMTestExpectedResults A notification isn't received after sending the message. The received status report generates a notification.

RUN_TEST_STEP  100 TE_smsprt TestReceivingLastSMSC z:\testdata\configs\te_statusReportScheme.ini ReceivePermanentFailureStatusReportSinglePDUSMSCLastPDU

END_TESTCASE SMS-GSMU-0108

START_TESTCASE SMS-GSMU-0109

//!@SYMTestCaseID SMS-GSMU-0109	

//!@SYMFssID CR0205	

//!@SYMTestPriority High

//!@SYMTestCaseDesc Receive a "temporary failure" and a "permanent failure" status report for a SMSC scheme in a single 8bit PDU message set with value 0x01.    

//!@SYMTestActions

//1. Mark the heap

//2. Create SMS message with test data (3) and with SMSC scheme with value 0x01.

//3. Send the message and check request completes KErrNone 

//4. Delete the message

//5. Receive "temporary failure" status report - PDU(133)

//6. Receive "permanent failure" status report - PDU(134)

//7. Unmark the heap

//!@SYMTestExpectedResults A notification isn't received after sending or after receiving the status report PDU(133).  A notification is generated on receiving PDU(134)

RUN_TEST_STEP  100 TE_smsprt TestReceivingLastSMSC z:\testdata\configs\te_statusReportScheme.ini ReceiveTemporyFailurePermanentFailureStatusReportSinglePDUSMSCScheme

END_TESTCASE SMS-GSMU-0109

START_TESTCASE SMS-GSMU-0110

//!@SYMTestCaseID SMS-GSMU-0110	

//!@SYMFssID CR0205	

//!@SYMTestPriority High

//1@SYMTestCaseDesc Receive a "temporary failure" and a "completed" status report for a SMSC scheme in a single 8bit PDU message set with value 0x01.    

//!@SYMTestActions

//1. Mark the heap

//2. Create SMS message with test data (3) and with SMSC scheme with value 0x01.

//3. Send the message and check request completes KErrNone 

//4. Delete the message

//5. Receive "temporary failure" status report - PDU(135)

//6. Receive "completed" status report - PDU(136)

//7. Unmark the heap

//!@SYMTestExpectedResults A notification is only generated on receiving PDU(136)

RUN_TEST_STEP  100 TE_smsprt TestReceivingLastSMSC z:\testdata\configs\te_statusReportScheme.ini ReceiveTemporyFailureCompletedStatusReportSinglePDUSMSCScheme

END_TESTCASE SMS-GSMU-0110

START_TESTCASE SMS-GSMU-0112

//!@SYMTestCaseID SMS-GSMU-0112	

//!@SYMFssID CR0205	

//!@SYMTestPriority High

//!@SYMTestCaseDesc Receive "completed" status reports for a multiple 8 bit PDU message with SMSC set in every PDU (0x01) in this order: third,second,first.

//!@SYMTestActions

//1. Mark the heap

//2. Create SMS message with test data (4) and with SMSC scheme set (0x01) and in every PDU.

//3. Send the message and check request completes KErrNone 

//4. Delete the message

//5. Receive completed status report for third PDU - PDU(140)

//6. Receive completed status report for second PDU - PDU(141)

//7. Receive completed status report for first PDU - PDU(142)

//8. Unmark the heap

//!@SYMTestExpectedResults A notification isn't received after sending. The status reports received are logged and a notification is generated on receiving PDU(142).

RUN_TEST_STEP  100 TE_smsprt TestReceivingSMSCAllPDUs z:\testdata\configs\te_statusReportScheme.ini MultipeCompletedStatusReportsSMSCScheme

END_TESTCASE SMS-GSMU-0112

START_TESTCASE SMS-GSMU-0114

//!@SYMTestCaseID SMS-GSMU-0114	

//!@SYMFssID CR0205	

//!@SYMTestPriority High

//!@SYMTestCaseDesc Receive "completed" and "temporary failure" status reports for a multiple 8 bit PDU message with SMSC set in every PDU (0x01) in this order: second, third, first.

//!@SYMTestActions

//1. Mark the heap

//2. Create SMS message with test data (4) and with SMSC scheme set (0x01) and in every PDU.

//3. Send the message and check request completes KErrNone 

//4. Delete the message

//5. Receive "completed" status report for second PDU - PDU(146)

//6. Receive "temporary failure" status report for third PDU - PDU(147)

//7. Receive "completed" status report for first PDU - PDU(148)

//8. Receive "completed" status report for third PDU - PDU(149)

//9. Unmark the heap

//!@SYMTestExpectedResults A notification isn't received after sending. The status reports received are logged and a notification is generated on receiving PDU(149).

RUN_TEST_STEP  100 TE_smsprt TestReceivingSMSCAllPDUs z:\testdata\configs\te_statusReportScheme.ini MultipeCompletedTemporaryFailureStatusReportsSMSCScheme

END_TESTCASE SMS-GSMU-0114

START_TESTCASE SMS-GSMU-0115

//!@SYMTestCaseID SMS-GSMU-0115	

//!@SYMFssID CR0205	

//!@SYMTestPriority Critical

//!@SYMTestCaseDesc Receive "completed" status reports for a multiple 8 bit PDU message with SMSC scheme set (0x01) in last segment only.

//!@SYMTestActions

//1. Mark the heap

//2. Create SMS message with test data (4) and SMSC scheme set in last segment (0x01).

//3. Send the message and check request completes KErrNone 

//4. Delete the message

//5. Receive "completed" status report for last PDU - PDU(150)

//6. Unmark the heap

//!@SYMTestExpectedResults A notification isn't received after sending. The status report received is logged and a notification is generated on receiving it.

RUN_TEST_STEP  100 TE_smsprt TestReceivingLastSMSC z:\testdata\configs\te_statusReportScheme.ini MultipePDUSingleStatusReportLastPDUSMSCScheme

END_TESTCASE SMS-GSMU-0115

START_TESTCASE SMS-GSMU-0116

//!@SYMTestCaseID SMS-GSMU-0116	

//!@SYMFssID CR0205	

//!@SYMTestPriority Critical

//!@SYMTestCaseDesc Receive "temporary failure" and "completed" status reports for a multiple 8 bit PDU message with SMSC scheme set (0x01) in last segment only.

//!@SYMTestActions

//1. Mark the heap

//2. Create SMS message with test data (4) and SMSC scheme set in last segment (0x01).

//3. Send the message and check request completes KErrNone 

//4. Delete the message

//5. Receive "temporary failure" status report for last PDU - PDU(151)

//6. Receive "completed" status report for last PDU - PDU(152)

//7. Unmark the heap

//!@SYMTestExpectedResults A notification only received after receiving status report PDU(152).

RUN_TEST_STEP  100 TE_smsprt TestReceivingLastSMSC z:\testdata\configs\te_statusReportScheme.ini MultipePDUTemporaryCompleteStatusReportLastPDUSMSCScheme

END_TESTCASE SMS-GSMU-0116

START_TESTCASE SMS-GSMU-0117

//!@SYMTestCaseID SMS-GSMU-0117	

//!@SYMFssID CR0205	

//!@SYMTestPriority Critical

//!@SYMTestCaseDesc Receive "permanent failure" status reports for a multiple 8 bit PDU message with SMSC scheme set (0x01) in last segment only.

//!@SYMTestActions

//1. Mark the heap

//2. Create SMS message with test data (4) and SMSC scheme set in last segment (0x01).

//3. Send the message and check request completes KErrNone 

//4. Delete the message

//5. Receive "permanent failure" status report for last PDU - PDU(153)

//6. Unmark the heap

//!@SYMTestExpectedResults A notification is only received after receiving status report PDU(153).

RUN_TEST_STEP  100 TE_smsprt TestReceivingLastSMSC z:\testdata\configs\te_statusReportScheme.ini MultipePDUPermanentFailureStatusReportLastPDUSMSCScheme

END_TESTCASE SMS-GSMU-0117

START_TESTCASE SMS-GSMU-0118

//!@SYMTestCaseID SMS-GSMU-0118	

//!@SYMFssID CR0205	

//!@SYMTestPriority Critical

//!@SYMTestCaseDesc Receive "temporary failure" and "permanent failure" status reports for a multiple 8 bit PDU message with SMSC scheme set (0x01) in last segment only.

//!@SYMTestActions

//1. Mark the heap

//2. Create SMS message with test data (4) and SMSC scheme set in last segment (0x01).

//3. Send the message and check request completes KErrNone 

//4. Delete the message

//5. Receive "temporary failure" status report for last PDU - PDU(154)

//6. Receive "permanent failure" status report for last PDU - PDU(155)

//7. Unmark the heap

//!@SYMTestExpectedResults A notification only received after receiving status report PDU(155).

RUN_TEST_STEP  100 TE_smsprt TestReceivingLastSMSC z:\testdata\configs\te_statusReportScheme.ini MultipePDUTemporaryPermanentFailureStatusReportLastPDUSMSCScheme

END_TESTCASE SMS-GSMU-0118