// Copyright (c) 1997-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

// This file initiates the "Data Call Test" scenario for the :q

// Test Harness.

// This file handles both the test side and the emulator side of the GSM

// Test Harness for this scenario.  The test side must start the emulator and 

// drive the ETel API.  The emulator side runs the designated script.

// 

//

/**

 @file

 @note  There are mulitple classes implemented in this file.

 @note  These classes are CTestDriveDataCall and CTestDataCall.

*/

#include <e32test.h>

#include <etelmm.h>

#include "Te_LoopBackcdatacall.h"

#include "../../hayes/TSYCONFG.H"	// for KInternetAccessPoint

//

// Test-side class

// With the assistance of the base class, this class must start the emulator

// and drive the ETel API.

//

CTestDriveDataCall* CTestDriveDataCall::NewL(const TScriptList aScriptListEntry)

/**

 * 2 Phase Constructor

 *

 * This method creates an instance of CTestDriveDataCall.  The ConstructL for

 * for CTestDriveDataCall is inherited from and implemented in CTestBase. The 

 * ConstructL uses the CTestDriveDataCall object to load ond open the two iPhone 

 * objects, one from each server. 

 *

 * @param aScriptListEntry: enum indicating which script to use for this test.

 * @leave Leaves if a failure occurs during connect or open of the iPhone by ConstructL.

 * @return pointer to the instance of CTestDriveDataCall.

 */

	{

	CTestDriveDataCall* aA=new(ELeave) CTestDriveDataCall(aScriptListEntry);

	CleanupStack::PushL(aA);

	aA->ConstructL();

	CleanupStack::Pop();

	return aA;

	}

CTestDriveDataCall::CTestDriveDataCall(const TScriptList aScriptListEntry) : iScriptListEntry(aScriptListEntry)

/**

 * This method is the constructor for CTestDriveDataCall.

 *

 * @param aScriptListEntry: enum indicating which script to use for this test.

 * @note Initializes private data "aScriptListEntry" to received parameter.

 */

	{}

TInt CTestDriveDataCall::RunTestL()

/**

 * This method is invoked to start a Data Call Test. 

 * This method starts the modem emulator side of the test.

 *

 * @return KErrNone when no error exists.

 * @return KErrAlreadyExists is returned if modem emulator exists and retry limit expires.

 * @return Variable depending on return value from test's DriveETelApiL method and thread monitoring.

 */

	{

	iCurrentScript=iScriptListEntry;

	return StartEmulatorL();

	}

TInt CTestDriveDataCall::DriveETelApiL()

/**

 * This method contains the real meat of the Client-side Data Call Test code.

 * This method sets up a write test for both an outgoing and incoming call for

 * a Data Call Test.

 *

 * @return KErrNone.

 */

	{

	_LIT(KDataLineName,"Data");

	RLine line;

	INFO_PRINTF1(_L("Opening Data Line\n"));

	TESTL(line.Open(iPhone,KDataLineName)==KErrNone);

	INFO_PRINTF1(_L("Opening New Data Call\n"));

	RCall call;

	TESTL(call.OpenNewCall(line)==KErrNone);

	TRequestStatus reqStatus;

	RMobilePhone::TMMTableSettings tableSettings;

	tableSettings.iLocId=KInternetAccessPoint;

	RMobilePhone::TMMTableSettingsPckg tableSettingsPckg(tableSettings);

	iPhone.InitialiseMM(reqStatus , tableSettingsPckg); 	

	User::WaitForRequest(reqStatus);

	TESTL(reqStatus == KErrNone);

	_LIT(KDialString,"+1234");

	TRequestStatus stat;

	TESTL(call.Dial(KDialString)==KErrNone);

	RCall::TCommPort commPort;

	TESTL(call.LoanDataPort(commPort)==KErrNone);

	RCommServ cs;

	TESTL(cs.Connect()==KErrNone);

	RComm port;

	TESTL(port.Open(cs,commPort.iPort,ECommShared)==KErrNone);

	port.Write(stat,KWriteTestData);

	User::WaitForRequest(stat);

	TESTL(stat.Int()==KErrNone);

    //-- a small delay between successive writes to the COM port

    //-- I had to insert it to fix mistiming between script execution and sending AT-commands to modem

    User::After(500000);		

	port.Write(stat,KWriteTestData);

	User::WaitForRequest(stat);

	TESTL(stat.Int()==KErrNone);

	port.Close();

	cs.Close();

	TESTL(call.RecoverDataPort()==KErrNone);

	TESTL(call.HangUp()==KErrNone);

	User::After(1000000);		

// Now wait for an incoming call...

	TESTL(call.AnswerIncomingCall()==KErrNone);

	TESTL(call.LoanDataPort(commPort)==KErrNone);

	TESTL(cs.Connect()==KErrNone);

	TESTL(port.Open(cs,commPort.iPort,ECommShared)==KErrNone);

	port.Write(stat,KWriteTestData2);

	User::WaitForRequest(stat);

	TESTL(stat.Int()==KErrNone);

    //-- a small delay between successive writes to the COM port

    //-- I had to insert it to fix mistiming between script execution and sending AT-commands to modem

    User::After(500000);		

	port.Write(stat,KWriteTestData2);

	User::WaitForRequest(stat);

	TESTL(stat.Int()==KErrNone);

	port.Close();

	cs.Close();

	TESTL(call.RecoverDataPort()==KErrNone);

	TESTL(call.HangUp()==KErrNone);

	call.Close();

	line.Close();

	return KErrNone;

	}

//

// Emulator-side class

// With the assistance of the base class, this class must run the designated script

//

CTestDataCall* CTestDataCall::NewL(const TScript* aScript)

/**

 * 2 Phase Constructor

 *

 * This method creates an instance of CTestDataCall.

 *

 * @param aScript: pointer to the specifics of the script to run. 

 * @leave Leaves if out of memory when attempting to create. 

 * @return pointer to the instance of CTestDataCall.

 */

	{

	CTestDataCall* aA=new(ELeave) CTestDataCall(aScript);

	CleanupStack::PushL(aA);

	aA->ConstructL();

	CleanupStack::Pop();

	return aA;

	}

CTestDataCall::CTestDataCall(const TScript* aScript) : iScript(aScript)

/**

 * This method is the constructor for CTestDataCall.

 *

 * @param aScript: pointer to the specifics of the script to run. 

 * @note Initializes private data "aScript" to received parameter.

 */

	{}

void CTestDataCall::ConstructL()

/**

 * This method is used to implement the 2 Phase Constructor for CTestDataCall.

 * This method uses the CATBase ConstructL to configure the port to be used.

 *

 * @leave Leaves if CATBase leaves.

 */

	{

	CATScriptEng::ConstructL();

	}

TInt CTestDataCall::Start()

/**

 * This method is defined as a pure virtual function that must be implemented.

 * This method is currently not used by the Etel regression test harness.

 * Instead of using this method to start the scripts, the CTestTxMess::Start()

 * method is used to start the scripts.  The CTestTxMess::Start() is called by

 * the responder thread of the scripting engine to start the execution of the script.

 *

 * @return KErrNone.

 */

	{

	StartScript(iScript);

	return KErrNone;

	}

void CTestDataCall::SpecificAlgorithmL(TInt /* aParam */)

/**

 * This method is defined as a pure virtual function that must be implemented.

 * This method is currently not used by the Etel regression test harness.

 * Instead of using this method to perform an algorithm specific to this test,

 * the CTestTxMess::SpecificAlgorithm() method is used.  The CTestTxMess::SpecificAlgorithm() 

 * is called by the scripting engine to perform the test specific algorithm.

 */

	{

	}

void CTestDataCall::Complete(TInt aError)

/**

 * This method is defined as a pure virtual function that must be implemented.

 * This method is currently not used by the Etel regression test harness.

 * Instead of using this method to end the scripts, the CTestTxMess::Complete()

 * method is used to end the scripts.  The CTestTxMess::Complete() is called by

 * the scripting engine to end the execution of the script.

 */

	{

	iReturnValue=aError;

	CActiveScheduler::Stop();

	}