/*

* All rights reserved.

* This component and the accompanying materials are made available

* under the terms of "Eclipse Public License v1.0"

* which accompanies this distribution, and is available

* at the URL "http://www.eclipse.org/legal/epl-v10.html".

*

* Initial Contributors:

* Nokia Corporation - initial contribution.

*

* Contributors:

*

* Description:

* Interface   : Domain, Startup Adaptation API

* This header file defines the startup adaptation API commands

* and their parameters.

* This file contains the following sections:

* - Command definitions

* - Command parameter definitions

* - Response parameter definitions

*

*/

#ifndef __STARTUPADAPTATIONCOMMANDS_H__

#define __STARTUPADAPTATIONCOMMANDS_H__

#include <e32std.h>

/*****************************************************

*       Series 60 Customer

*       Needs customer implementation

*****************************************************/

/**

* All command and event definitions of Startup Adaptation API belong to

* StartupAdaptation namespace.

*

* @file

* @publishedPartner

* @released

*

*/

namespace StartupAdaptation

    {

    /**

    * Command definitions

    * All commands contain a command id and a set of parameters. The command ids

    * are defined first and after that parameters for each command.

    *

    * This interface is asynchronous. A command is interpreted of being

    * completed after a response for that command is received.

    *

    * @param field means the parameter for the command.

    * @return field means the parameter for the response.

    */

    enum TCommand

        {

        /**

        * This command is used to change the global state of an S60 device.

        *

        * When changing the global state, S60 starter server issues a state

        * change command to startup adaptation via the startup adaptation API.

        * After receiving a response, S60 starter server will publish the new

        * state using Publish & Subscribe and execute operations required in

        * that state.

        *

        * @param  TGlobalStateChangePckg The requested global state.

        * @return TResponsePckg The success status of the state change.

        */

        EGlobalStateChange = 100,

        /**

        * Security state change request. Used only when global state is security

        * check.

        *

        * @param  TSecurityStateChangePckg The requested security state.

        * @return TSecurityStateResponsePckg The success status of the state

        * change and, if the operation was successful, additional information

        * which depends on the state.

        */

        ESecurityStateChange = 101,

        /**

        * Get global startup mode.

        *

        * The global startup mode indicates the mode in which the device has

        * been started. The startup mode can also be seen as a reason for the

        * startup.

        *

        * @param  None.

        * @return TGlobalStartupModeResponsePckg The success status of the

        * operation and, if the operation was successful, the global startup

        * mode.

        */

        EGetGlobalStartupMode = 102,

        /**

        * Request Domestic OS to perform self tests.

        *

        * Before launching any software components that are using some specific

        * hardware, self-tests need to be executed for the hardware. This

        * command is used to request licensee-specific self-tests to be

        * executed. It is allowed to perform the self-tests before this command,

        * but when this command is issued, S60 starter server expects to get the

        * result of the self-tests.

        *

        * @param  None.

        * @return TResponsePckg The success status of the self tests.

        */

        EExecuteSelftests = 103,

        /**

        * Get the language codes that are stored in the SIM card preferred

        * language lists.

        *

        * Primary language list will be queried first. Unless it contains

        * at least one language that can be taken into use, the secondary

        * preferred list will be queried for. Only if there is no acceptable

        * languages in the secondary list either, will the tertiary list be

        * queried for.

        *

        * @param  TLanguageListPriorityPckg.

        * @return TLanguageListResponsePckg The list of languages mapped to

        * Symbian language codes.

        */

        EGetSIMLanguages = 104,

        /**

        * This command is used to check the validity of Real Time Clock (RTC).

        *

        * @param  None.

        * @return TResponsePckg The success status of the operation. KErrNone

        * if the RTC time is valid, any other value indicates that it is not

        * valid.

        */

        EValidateRTCTime = 107,

        /**

        * Query whether the current SIM card is different from the previous one.

        *

        * The SIM changed status indicates whether the currently inserted SIM

        * card has changed since the last startup. This information can be used

        * for example to query whether the user wants to clear phone call logs.

        *

        * S60 starter server makes this query only if there is a SIM card

        * present. This command will only be issued in ESWStateCriticalPhaseOK

        * state.

        *

        * @param  None.

        * @return TBooleanResponsePckg Success status of the operation, and if

        * the operation was successful, indication whether the SIM card has been

        * changed after the last boot or not.

        */

        EGetSimChanged = 108, //This Enum should not be used.

        /**

        * Query whether the current SIM card is among the last used cards.

        *

        * It is up to the startup adaptation to decide the number of SIM cards

        * that are considered owned.

        *

        * If the SIM owned status is false, then the SIM changed status must be

        * true.

        *

        * S60 starter server makes this query only if there is a SIM card

        * present. This command will only be issued in ESWStateCriticalPhaseOK

        * state.

        *

        * @param  None.

        * @return TBooleanResponsePckg Success status of the operation, and if

        * the operation was successful, indication whether the SIM card is among

        * the five last used cards or not.

        */

        EGetSimOwned = 109,

        /**

        * This command is used to set a wake-up alarm time so that the device is

        * powered up by an alarm when it goes off, i.e. the device will be

        * started in the alarm mode.

        *

        * @see Command EGetGlobalStartupMode.

        *

        * @param  TWakeupAlarmPckg The time for the alarm.

        * @return TResponsePckg Success status of the operation.

        */

        ESetWakeupAlarm = 110,

        /**

        * This command is used to cancel a wake-up alarm.

        *

        * @param  None.

        * @return None Cancels must always succeed.

        */

        ECancelWakeupAlarm = 111,

        /**

        * A reboot request.

        *

        * This command is used to inform the startup adaptation that a reset

        * will be executed. The command also reports the reason for the reset

        * in case there is a need for some licensee-specific actions.

        *

        * This command will only be executed in the state ESWStateShuttingDown.

        * After receiving a response to the command, the S60 starter server will

        * only clean up itself and then call UserHal::SwitchOff().

        *

        * @param  TResetReasonPckg The reason for resetting.

        * @return TResponsePckg Success status of the operation.

        */

        EExecuteReset = 112,

        /**

        * A shutdown request.

        *

        * This command is used to inform the startup adaptation that the device

        * is going to be shut down.

        *

        * This command will only be executed in the state ESWStateShuttingDown.

        * After receiving a response to the command, the S60 starter server will

        * only clean up itself and then call UserHal::SwitchOff().

        *

        * @param  None.

        * @return TResponsePckg Success status of the operation.

        */

        EExecuteShutdown = 113,

        /**

        * Restore the factory settings of Domestic OS.

        *

        * Restoring factory settings may require some licensee-specific actions

        * to be performed. This command is used to request those actions to be

        * executed. The command will be issued during start-up sequence

        * following a reset caused by user-initiated RFS operation.

        *

        * @param  TRFSReasonPckg Indicates whether normal or deep RFS is

        * required.

        * @return TResponsePckg Success status of the operation.

        */

        EExecuteDOSRfs = 114,

        /**

        * Activate RF tranceiver for making an emergency call.

        *

        * Emergency calls have a high priority in S60 devices. Emergency calls

        * must be allowed whenever they are technically possible. There are two

        * cases, where the state of the device does not allow a mobile

        * originated call, but it must allow an emergency call.

        * - When the device is in offline mode. Applies also for the global

        *   state ESWStateEmergencyCallsOnly.

        * - When the device startup is in progress and RF transceiver is not

        *   yet switched on.

        * This command is used to switch RF transceiver on for making an

        * emergency call. As soon as the emergency call is finished, there will

        * be a command for switching RF transceiver off.

        *

        * @see Command EDeactivateRfAfterEmergencyCall.

        *

        * @param  None.

        * @return TResponsePckg Success status of the operation.

        */

        EActivateRfForEmergencyCall = 115,

        /**

        * Deactivate RF transceiver after making an emergency call.

        *

        * This command is used to switch RF transceiver off after an emergency

        * call.

        *

        * @see Command EActivateRfForEmergencyCall.

        *

        * @param  None.

        * @return TResponsePckg Success status of the operation.

        */

        EDeactivateRfAfterEmergencyCall = 116,

        /**

        * Query whether the current boot is a hidden reset.

        * Hidden reset means that boot-time queries and animations should not

        * be shown to the user.

        *

        * Boot-time queries and animations will be hidden from the user if the

        * system is executing a controlled reset (EExecuteReset command) or

        * this query returns ETrue.

        *

        * This query should return ETrue if the ongoing boot is caused by SW

        * reset (either controlled, initiated by EExecuteReset command, or

        * uncontrolled, caused by critical SW failure).

        * This query should return EFalse if the ongoing boot is initiated by

        * any other means (such as user pressing the power key or a wakeup

        * alarm occurring).

        *

        * This command will always be issued in ESWStateStartingUiServices

        * state.

        */

        EGetHiddenReset = 117

        };

    /*

    * ==========================================================================

    * Command parameter definitions

    * ==========================================================================

    */

    /**

    * Parameter definition for EGlobalStateChange.

     * Parameter indicates the global state to move to.

    *

    * Possible state transitions are:

    * ESWStateStartingUiServices -> ESWStateStartingCriticalApps

    * ESWStateStartingCriticalApps -> ESWStateSelfTestOK

    * ESWStateSelfTestOK -> ESWStateSecurityCheck

    * ESWStateSelfTestOK -> ESWStateCharging

    * ESWStateSelfTestOK -> ESWStateAlarm

    * ESWStateSelfTestOK -> ESWStateTest

    * ESWStateSecurityCheck -> ESWStateCriticalPhaseOK

    * ESWStateSecurityCheck -> ESWStateEmergencyCallsOnly

    * ESWStateCriticalPhaseOK -> ESWStateNormalRfOn

    * ESWStateCriticalPhaseOK -> ESWStateNormalRfOff

    * ESWStateNormalRfOn -> ESWStateNormalRfOff

    * ESWStateNormalRfOn -> ESWStateNormalBTSap

    * ESWStateNormalRfOff -> ESWStateNormalRfOn

    * ESWStateNormalRfOff -> ESWStateNormalBTSap

    * ESWStateNormalBTSap -> ESWStateNormalRfOn

    * ESWStateNormalBTSap -> ESWStateNormalRfOff

    * ESWStateCharging -> ESWStateChargingToAlarm

    * ESWStateCharging -> ESWStateChargingToNormal

    * ESWStateAlarm -> ESWStateAlarmToCharging

    * ESWStateAlarm -> ESWStateAlarmToNormal

    * ESWStateChargingToAlarm -> ESWStateAlarm

    * ESWStateAlarmToCharging -> ESWStateCharging

    * ESWStateChargingToNormal -> ESWStateSecurityCheck

    * ESWStateAlarmToNormal -> ESWStateSecurityCheck

    * (Any state except ESWStateStartingUiServices, ESWStateTest,

    *  ESWStateFatalStartupError and ESWStateShuttingDown) -> ESWStateFatalStartupError

    * (Any state except ESWStateTest and ESWStateShuttingDown) -> ESWStateShuttingDown

    */

    enum TGlobalState

        {

        ESWStateStartingUiServices = 100,

        ESWStateStartingCriticalApps,

        ESWStateSelfTestOK,

        // States for the security check phase.

        ESWStateSecurityCheck,

        ESWStateCriticalPhaseOK,

        ESWStateEmergencyCallsOnly,

        // Terminal states defined by the boot mode (and some other variables such as offline mode).

        ESWStateTest,

        ESWStateCharging,

        ESWStateAlarm,

        ESWStateNormalRfOn,

        ESWStateNormalRfOff,

        ESWStateNormalBTSap,

        // States for notifying adaptation about a terminal state change.

        ESWStateAlarmToCharging,

        ESWStateChargingToAlarm,

        ESWStateChargingToNormal,

        ESWStateAlarmToNormal,

        // Shutdown-related states.

        ESWStateShuttingDown,

        // Error states.

        ESWStateFatalStartupError

        };

    /**

    * Buffer descriptor containing TGlobalState object.

    */

    typedef TPckgBuf<TGlobalState> TGlobalStateChangePckg;

    /**

    * Parameter definition for ESecurityStateChange.

    * Parameter indicates the security state to move to.

    *

    * Possible state transitions are:

    * ESIMPresent -> ESIMReadable

    * ESIMPresent -> ESIMLessOfflineSupported

    * ESIMReadable -> ESIMInvalid

    * ESIMInvalid -> ESecurityCheckFailed

    * ESIMInvalid -> ESIMRejected

    * ESIMRejected -> ESIMBlocked

    * ESIMRejected -> ESecurityCheckFailed

    * ESIMBlocked -> EPINRequired

    * ESIMBlocked -> EAskPUK

    * EPINRequired -> EAskPIN

    * EPINRequired -> ESIMCodesOK

    * EAskPIN -> EAskPUK

    * EAskPIN -> ESIMCodesOK

    * EAskPUK -> ESIMCodesOK

    * EAskPUK -> ESecurityCheckFailed

    * ESIMCodesOK -> ESIMLock

    * ESIMCodesOK -> ESECCodeRequired

    * ESIMLock -> ESecurityCheckOK

    * ESIMLock -> ESecurityCheckFailed

    * ESIMLessOfflineSupported -> ESIMLock

    * ESIMLessOfflineSupported -> ESECCodeRequired

    * ESIMLessOfflineSupported -> ESecurityCheckFailed

    * ESECCodeRequired -> EAskSEC

    * ESECCodeRequired -> ESECCodeOK

    * EAskSEC -> ESECBlocked

    * EAskSEC -> ESECCodeOK

    * ESECBlocked -> EAskSEC

    * ESECCodeOK -> ESIMLock

    */

    enum TSecurityState

        {

        ESIMPresent = 100,       ///< Response param: Yes/No

        ESIMReadable,            ///< Response param: None (wait until SIM readable)

        ESIMRejected,            ///< Response param: Yes/No

        ESIMBlocked,             ///< Response param: No/PUK1/UPUK

        EPINRequired,            ///< Response param: No/PIN1/UPIN

        ESECCodeRequired,        ///< Response param: No/SEC/Master

        ESIMLessOfflineSupported,///< Response param: None (inform adaptation only)

        ESIMLock,                ///< Response param: SimLockRestricted/SimLockRestrictionOn/

                                 ///< SimLockRestrictionPending/SimLockOk

        ESECBlocked,             ///< Response param: None (inform adaptation only)

        EAskPIN,                 ///< Response param: None (inform adaptation only)

        EAskPUK,                 ///< Response param: None (inform adaptation only)

        EAskSEC,                 ///< Response param: None (inform adaptation only)

        ESIMCodesOK,             ///< Response param: None (inform adaptation only)

        ESECCodeOK,              ///< Response param: None (inform adaptation only)

        ESecurityCheckOK,        ///< Response param: None (inform adaptation only)

        ESecurityCheckFailed,     ///< Response param: None (inform adaptation only)

        ESIMInvalid              ///< Response param: Yes/No

        };

    /**

    * Buffer descriptor containing TSecurityState object.

    */

    typedef TPckgBuf<TSecurityState> TSecurityStateChangePckg;

    /**

    * Parameter definition for EGetSIMLanguages.

    */

    enum TLanguageListPriority

        {

        /**

        * Return list of language codes based on the most preferred language

        * list. In GSM the most preferred language list is stored in EF_LI

        * (see 3GPP TS 31.102).

        */

        EPrimaryLanguages = 100,

        /**

        * Return list of language codes based on the second preferred language

        * list. In GSM the second preferred language list is stored in EF_PL

        * (see 3GPP TS 51.011).

        */

        ESecondaryLanguages,

        /**

        * Return list of language codes based on the third preferred language

        * list. In GSM the third preferred language list is stored in EF_LP

        * (see 3GPP TS 51.011).

        */

        ETertiaryLanguages,

        };

    /**

    * Buffer descriptor containing TLanguageListPriority object.

    */

    typedef TPckgBuf<TLanguageListPriority> TLanguageListPriorityPckg;

    /**

    * Parameter definition for ESetWakeupAlarm and ECancelWakeupAlarm.

    */

    NONSHARABLE_STRUCT( TWakeupAlarmTime )

        {

        /**

        * The local time for the alarm. Startup adaptation needs to take the

        * offsets into account.

        */

        TTime iTime;

        /**

        * Universal time offset in seconds.

        */

        TTimeIntervalSeconds iUniversalTimeOffset;

        /**

        * Daylight saving offset in seconds, if not taken into account by the

        * universal time offset parameter.

        */

        TTimeIntervalSeconds iDaylightSavingOffset;

        };

    /**

    * Buffer descriptor containing TWakeupAlarmTime object.

    */

    typedef TPckgBuf<TWakeupAlarmTime> TWakeupAlarmPckg;

    /**

    * Parameter definition for EExecuteReset.

    */

    enum TResetReason

        {

        /** A reset due to display language switch. */

        ELanguageSwitchReset = 100,

        /** A reset due to restoring factory settings. */

        ENormalRFSReset = 101,

        /** A reset due to restoring factory settings (deep). */

        EDeepRFSReset = 102,

        /** A reset due to firmware update. */

        EFirmwareUpdate = 104,

        /** A reset due to an error. */

        EUnknownReset = 105,

        /** A reset due to removing operator settings. */

        EOperatorSettingReset = 106,

        /** A reset due to network mode change. */

        ENetworkModeChangeReset = 107,

        /** A reset due removing/inserting SIM card. */

        ESIMStatusChangeReset = 108,

        EDRMReset = 109,

        /** A reset after restoring backed-up data. */

        EDataRestoreReset = 110,

        /** A reset required by Field Test software. */

        EFieldTestReset = 111

        };

    /**

    * Buffer descriptor containing TResetReason object.