// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0""

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

// include/drivers/dma_v1.h

// DMA Framework API v1

//

// NB: DMA clients should never include this file directly, but only ever the

// generic header file <drivers/dma.h>.

//

#ifndef __DMA_H__

#error "dma_v1.h must'n be included directly - use <drivers/dma.h> instead"

#endif	// #ifndef __DMA_H__

#ifndef __DMA_V1_H__

#define __DMA_V1_H__

#include <kernel/kern_priv.h>

//////////////////////////////////////////////////////////////////////////////

// Debug Support - KDmaPanicCat is defined in each source file

#define __DMA_ASSERTD(e) __ASSERT_DEBUG(e, Kern::Fault(KDmaPanicCat, __LINE__))

#define __DMA_ASSERTA(e) __ASSERT_ALWAYS(e, Kern::Fault(KDmaPanicCat, __LINE__))

#ifdef _DEBUG

#define __DMA_CANT_HAPPEN() Kern::Fault(KDmaPanicCat, __LINE__)

#define __DMA_DECLARE_INVARIANT public: void Invariant();

#define __DMA_INVARIANT() Invariant()

#else

#define __DMA_CANT_HAPPEN()

#define __DMA_DECLARE_INVARIANT

#define __DMA_INVARIANT()

#endif

//////////////////////////////////////////////////////////////////////////////

// INTERFACE EXPOSED TO DEVICE-DRIVERS

//////////////////////////////////////////////////////////////////////////////

/**

Bitmasks used for configuring a DMA request.

In general, specify KDmaMemSrc|KDmaIncSrc (resp. KDmaMemDest|KDmaIncDest) if

the source (resp. destination) is a memory buffer and clear

KDmaMemSrc|KDmaIncSrc (resp. KDmaMemDest|KDmaIncDest) if the source

(resp. destination) is a peripheral.

If the location is given as a physical address (rather than a linear one)

then also specify KDmaPhysAddrSrc and/or KDmaPhysAddrDest.

The EKA1 "Fill Mode" can be implemented by omitting KDmaIncSrc.

Some peripherals may require a post-increment address mode.

@see DDmaRequest::Fragment

@publishedPartner

@released

*/

enum TDmaRequestFlags

	{

	/** Source is address of memory buffer */

	KDmaMemSrc       = 0x01,

	/** Destination is address of memory buffer */

	KDmaMemDest      = 0x02,

	/** Source address must be post-incremented during transfer */

	KDmaIncSrc       = 0x04,

	/** Destination address must be post-incremented during transfer */

	KDmaIncDest      = 0x08,

	/** Source address is a physical address (as opposed to a linear one) */

	KDmaPhysAddrSrc  = 0x10,

	/** Destination address is a physical address (as opposed to a linear one) */

	KDmaPhysAddrDest = 0x20,

	/** Request a different max transfer size (for instance for test purposes) */

	KDmaAltTransferLen = 0x40

	};

//////////////////////////////////////////////////////////////////////////////

class TDmaChannel;

struct SDmaDesHdr;

/** A DMA request is a list of fragments small enough to be transferred in one go

	by the DMAC.

	In general, fragmentation is done in the framework by calling Fragment() but

	clients with special needs can allocate a blank descriptor list with

	ExpandDesList() and customise it to fit their needs.

	Clients should not set attributes directly, but should use the various functions

	instead.

	This class has not been designed to be called from several concurrent threads.

	Multithreaded clients must implement their own locking scheme (via DMutex).

	Fast mutexes are used internally to protect data structures accessed both

	by the client thread and the DFC thread.  Therefore no fast mutex can be held

	when calling a request function.

	@publishedPartner

	@released

 */

class DDmaRequest : public DBase

	{

	friend class TDmaChannel;

public:

	/** The outcome of the transfer */

	enum TResult {EBadResult=0, EOk, EError};

	/** The signature of the completion/failure callback function */

	typedef void (*TCallback)(TResult, TAny*);

public:

    /**

    Create a new transfer request. 

    @param aChannel The channel this request is bound to.

    @param aCb      Callback function called on transfer completion or failure (in channel

                    DFC context).  Can be NULL.

    @param aCbArg   Argument passed to callback function.

    @param aMaxTransferSize Maximum fragment size.  If not specified, defaults to the maximum size

           supported by the DMA controller for the type of transfer that is later scheduled.

    */

	IMPORT_C DDmaRequest(TDmaChannel& aChannel, TCallback aCb=NULL, TAny* aCbArg=NULL, TInt aMaxTransferSize=0);

	/**

    Destructor.

    Assume the request is not being transferred or pending.

    */

	IMPORT_C ~DDmaRequest();

	/**

    Split request into a list of fragments small enough to be fed to the DMAC.

    The size of each fragment is smaller than or equal to the maximum transfer size

    supported by the DMAC.  If the source and/or destination is memory, each

    fragment points to memory which is physically contiguous.

    The kind of transfer to perform is specified via a set of flags used by a PIL

    and a magic cookie passed to the PSL.  If the source (resp. destination) is a

    peripheral, aSrc (resp. aDest) is treated as a magic cookie by the PIL and

    passed straight to the PSL.

    The request can be uninitialised or may have been fragmented previously.  The

    previous configuration if any is lost whether or not the function succeeds.

    @param aSrc     Source memory buffer linear address or peripheral magic cookie.

    @param aDest    Destination memory buffer linear address or peripheral magic cookie.

    @param aCount   Number of bytes to transfer.

    @param aFlags   Bitmask characterising the transfer.

    @param aPslInfo Hardware-specific information passed to PSL.

    @return KErrNone if success. KErrArgument if aFlags and/or aPslInfo are invalid when finding

    the maximum transfer size. May also fail if running out of descriptors.

    @pre The request is not being transferred or pending.

    @pre The various parameters must be valid.  The PIL or PSL will fault the

    kernel if not.

    @see TDmaRequestFlags

    */

	IMPORT_C TInt Fragment(TUint32 aSrc, TUint32 aDest, TInt aCount, TUint aFlags, TUint32 aPslInfo);

	/**

    Transfer asynchronously this request.

    If this request's channel is idle, the request is transferred immediately.

    Otherwise, it is queued and transferred later.

    The client is responsible for ensuring cache consistency before and/or after the

    transfer if necessary.

    */

	IMPORT_C void Queue();

    /**

    Append new descriptor(s) to existing list.

    Clients needing to build a custom descriptor list should call this function to

    allocate the list and access the resulting list through iFirstHdr and iLastHdr.

    Clients should not change the value of iFirstHdr, iLastHdr and the iNext field

    of the descriptor headers to ensure descriptors can be deallocated. Clients

    are free to change hardware descriptors, including chaining, in whatever way

    suit them.

    Assume the request is not being transferred or pending.

    @param aCount Number of descriptors to append.

    @return KErrNone or KErrTooBig if not enough descriptors available.

    */

	IMPORT_C TInt ExpandDesList(TInt aCount=1);

	/**

    Free resources associated with this request.

    Assume the request is not being transferred or pending.

    */

	IMPORT_C void FreeDesList();

private:

	inline void OnDeque();

public:

	// WARNING: The following attributes are accessed both in client and DFC

	// context and so accesses must be protected with the channel lock.

	TDmaChannel& iChannel;		/**< The channel this request is bound to */

	volatile TCallback iCb;		/**< Called on completion/failure (can be NULL) */

	TAny* volatile iCbArg;		/**< Callback argument */

	TInt iDesCount;				/**< The number of fragments in list */

	SDmaDesHdr* iFirstHdr;		/**< The first fragment in the list (or NULL) */

	SDmaDesHdr* iLastHdr;		/**< The last fragment in the list (or NULL) */

	SDblQueLink iLink;			/**< The link on channel queue of pending requests */

	TBool iQueued;				/**< Indicates whether request is pending or being transferred */

	TInt iMaxTransferSize;		/**< Defaults to DMA controller max. transfer size */

	__DMA_DECLARE_INVARIANT

	};

//////////////////////////////////////////////////////////////////////////////

class TDmac;

class DmaChannelMgr;

/** DMA channel base class.

	This class has not been designed to be called from several concurrent

	client threads.  Multithreaded clients must implement their own locking

	scheme (via DMutex).

	Fast mutexes are used internally to protect data structures accessed both

	by the client thread and the DFC one.  Therefore no fast mutex can be held

	when calling a channel function.

	Must be allocated in BSS because it relies on being zeroed at

	creation-time.  If the PSL really needs to allocate channels on the kernel

	heap, it must manually zero-initialises the instances.  This can be

	achieved either by allocating raw memory and using placement new, or by

	wrapping channels into a DBase-derived wrapper.

	@publishedPartner

	@released

 */

class TDmaCancelInfo;

class TDmaChannel

	{

	friend class DDmaRequest;

	friend class TDmac;

	friend class DmaChannelMgr;

public:

	/**  Information passed by client when opening channel */

	struct SCreateInfo

		{

		/** Identifier used by PSL to select channel to open */

		TUint32 iCookie;

		/** Number of descriptors this channel can use */

		TInt iDesCount;

		/** DFC queue used to service DMA interrupts.  The DFC thread

			priority must be higher than any client thread priority to

			avoid a situation where a transfer completes while being

			cancelled and another transfer is started before the DFC

			thread gets a chance to run.  This would lead to a stray

			DFC.

		*/

		TDfcQue* iDfcQ;

		/** DFC priority */

		TUint8 iDfcPriority;

		};

public:

    /**

 	Opens the DMA channel.

 	Channel selection is done by the hardware-specific layer using a cookie passed in

 	via aInfo.

 	The client should not delete the returned pointer as the framework owns

 	channel objects.  However, the client should explicitly close the channel when

 	finished with it.

	@param aInfo    Information passed by caller to select and configure channel.

 	@param aChannel Point to open channel on successful return.  NULL otherwise.

 	@return KErrNone or standard error code.

 	*/

	IMPORT_C static TInt Open(const SCreateInfo& aInfo, TDmaChannel*& aChannel);

	/**

 	Closes a previously opened DMA channel.

 	Assume the channel is idle and all requests have been deleted.

 	*/

	IMPORT_C void Close();

	/**

 	Cancels the current request and all the pending ones.

 	*/

	IMPORT_C void CancelAll();

	inline TBool IsOpened() const;

	inline TBool IsQueueEmpty() const;

	inline TUint32 PslId() const;

	inline TInt FailNext(TInt aFragmentCount);

	inline TInt MissNextInterrupts(TInt aInterruptCount);

	inline TInt Extension(TInt aCmd, TAny* aArg);

	/**

	This is a function that allows the Platform Specific Layer (PSL) to extend the DMA API

	with new channel-independent operations.

	@param aCmd Command identifier.  Negative values are reserved for Symbian use.

	@param aArg PSL-specific.

	@return KErrNotSupported if aCmd is not supported; a  PSL specific value otherwise.

 	*/

	IMPORT_C TInt StaticExtension(TInt aCmd, TAny* aArg);

	inline const TDmac* Controller() const;

	inline TInt MaxTransferSize(TUint aFlags, TUint32 aPslInfo);

	inline TUint MemAlignMask(TUint aFlags, TUint32 aPslInfo);

protected:

	// Interface with state machines

	TDmaChannel();

	virtual void DoQueue(DDmaRequest& aReq) = 0;

	virtual void DoCancelAll() = 0;

	virtual void DoUnlink(SDmaDesHdr& aHdr);

	virtual void DoDfc(DDmaRequest& aCurReq, SDmaDesHdr*& aCompletedHdr) = 0;

	/**

	   This function allows the Platform Specific Layer (PSL) to control the

	   power management of the channel or its controller by overriding the

	   PIL's default implementation (which does nothing) and making appropriate

	   use of the Power Resource Manager (PRM).

	   The function gets called by the PIL whenever the channel's queued

	   requests count has changed in a significant way, either before the

	   channel's Transfer() method is invoked for a request on a previously

	   empty request queue, or immediately after the request count has become

	   zero because of request cancellation or completion.

	   Depending on the current value of iQueuedRequests, the PSL may power

	   down or power up the channel. Note that iQueuedRequests gets accessed

	   and changed by different threads, so the PSL needs to take the usual

	   precautions when evaluating the variable's value.

	   None of the internal DMA framework mutexes is being held by the PIL when

	   calling this function.

	   @see iQueuedRequests

	 */

	virtual void QueuedRequestCountChanged();

#if defined(__CPU_ARM) && !defined(__EABI__)

	inline virtual ~TDmaChannel() {}	// kill really annoying warning

#endif

private:

	static void Dfc(TAny*);

	void DoDfc();

	inline void Wait();

	inline void Signal();

	inline TBool Flash();

	void ResetStateMachine();

protected:

	TDmac* iController;										// DMAC this channel belongs to (NULL when closed)

	TUint32 iPslId;											// unique identifier provided by PSL

	NFastMutex iLock;										// for data accessed in both client & DFC context

	SDmaDesHdr* iCurHdr;									// fragment being transferred or NULL

	SDmaDesHdr** iNullPtr;									// Pointer to NULL pointer following last fragment

	TDfc iDfc;												// transfer completion/failure DFC

	TInt iMaxDesCount;										// maximum number of allocable descriptors

	TInt iAvailDesCount;									// available number of descriptors

	volatile TUint32 iIsrDfc;								// Interface between ISR and DFC:

	enum { KErrorFlagMask = 0x80000000 };					// bit 31 - error flag

	enum { KCancelFlagMask = 0x40000000 };					// bit 30 - cancel flag

	enum { KDfcCountMask = 0x3FFFFFFF };					// bits 0-29 - number of queued DFCs

	SDblQue iReqQ;											// being/about to be transferred request queue

	TInt iReqCount;											// number of requests attached to this channel

	TInt iQueuedRequests; 									// number of requests currently queued on this channel

private:

	TDmaCancelInfo* iCancelInfo;

	__DMA_DECLARE_INVARIANT

	};

//////////////////////////////////////////////////////////////////////////////

// PIL-PSL INTERFACE

//////////////////////////////////////////////////////////////////////////////

/**

Generic DMA descriptor used if the DMAC does not have support for hardware

descriptor.

@see DDmaRequest::Fragment

@publishedPartner

@released

*/

struct SDmaPseudoDes

	{

	/** Source linear address or peripheral cookie */

	TUint32 iSrc;

	/** Destination linear address or peripheral cookie */

	TUint32 iDest;

	/** Number of bytes to transfer */

	TInt iCount;

	/** @see TDmaRequestFlags */

	TUint iFlags;

	/** PSL-specific information provided by client */

	TUint32 iPslInfo;

	/** The same as TDmaChannel::SCreateInfo.iCookie */

	TUint32 iCookie;

	};

/**

Each hardware or pseudo descriptor is associated with a header.  Headers are

needed because hardware descriptors can not easily be extended to store

additional information.

@publishedPartner

@released

*/

struct SDmaDesHdr

	{

	SDmaDesHdr* iNext;

	};

/**

Interface used by PIL to open and close DMA channels.

Must be implemented by PSL.

@publishedPartner

@released

*/

class DmaChannelMgr

	{

public:

	/** Opens a channel using a client-provided identifier.

		This function must be implemented by the PSL.

		@param	aOpenId Magic cookie passed by client

				This may identify the channel (if a static channel

				allocation scheme is used) or may indicate some

				properties which the channel must possess (if a dynamic

				channel allocation scheme is used). It may be set to

				zero always if dynamic allocation is used and all

				channels are equivalent.

		@return	Pointer to channel if available, NULL otherwise.

		@pre	The PIL calls this function with a global fast mutex held to

				avoid race conditions.

		@post	If a non-NULL pointer is returned, the object pointed to has its

				iController and iPslId members set to valid states.

				iController should point to the controller handling that channel.

				iPslId should contain a value uniquely identifying the channel -

				it is used only for debug tracing by PIL. It can be given any

				convenient value by PSL	(channel index, I/O port address, ...).

	*/

	static TDmaChannel* Open(TUint32 aOpenId);

	/** Performs platform-specific operations when a channel is closed.

		This function must be implemented by the PSL but the implementation can be

		a no-op.

		@param aChannel The channel to close

		@pre The PIL calls this function with a global fast mutex held to

			avoid race conditions.

	*/

	static void Close(TDmaChannel* aChannel);

	/** Function allowing PSL to extend DMA API with new channel-independent operations.

		This function must be implemented by the PSL.

		@param aCmd Command identifier.  Negative values are reserved for Symbian use.

		@param aArg PSL-specific

		@return KErrNotSupported if aCmd is not supported.  PSL-specific value otherwise.

	 */

	static TInt StaticExtension(TInt aCmd, TAny* aArg);

	static inline void Wait();

	static inline void Signal();

private:

	static NFastMutex Lock;

	};

//////////////////////////////////////////////////////////////////////////////

/**

 Abstract base class representing a DMA controller.