//

// Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of the License "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description: 

//

//

// Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

//

PRINT Authentication Server tests...

//LOAD_SUITE tAuthSvr -SharedData

LOAD_SUITE tAuthSvr

//Next line makes use of the new keyword that is more readable

//LOAD_SERVER tAuthSvrServer -SharedData		

//============================================================

//

//! @SYMTestCaseID SEC-AUT-AUTHSVR-0056

//! @SYMTestCaseDesc Start the authServer with no identities, having a default plugin defined

//! 		     (IdentifyMultiple_AllAtOnce)

//! @SYMREQ REQ , REQ , REQ , REQ 

//! @SYMTestPriority Medium

//! @SYMTestActions  Have a default plugin defined, use a client that has ReadDeviceData capability to connect to the AuthServer, 

//!			call the Enumerate Identity API

//! @SYMTestExpectedResults Default identity is the only one listed

//! @SYMDevelopedForRelease Intulo

START_TESTCASE SEC-AUT-AUTHSVR-0056

//RUN_UTILS MakeReadWrite c:\tauth\tAuthSvr\testdata\AuthSvrPolicy.ini

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	CreateTestDb 

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	FIRST_START			c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0001

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	IDENTIFY_MULTIPLE	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0001

END_TESTCASE SEC-AUT-AUTHSVR-0056

//============================================================

// //

// //! @SYMTestCaseID SEC-AUT-AUTHSVR-0021

// //! @SYMTestCaseDesc Start the authServer with no identities, having a default plugin defined

// //! 		        (RegisterIdentity1_Normal)

// //! @SYMREQ REQ4969 4970 4971 4972 4975 4976 4977 4978

// //! @SYMTestPriority Medium

// //! @SYMTestActions  Have a default plugin defined, use a client that has ReadDeviceData capability to connect to the AuthServer, 

// //!			call the Enumerate Identity API

// //! @SYMTestExpectedResults Default identity is the only one listed

// //! @SYMDevelopedForRelease Intulo

// START_TESTCASE SEC-AUT-AUTHSVR-0021

// RUN_UTILS MakeReadWrite c:\tauth\tAuthSvr\testdata\AuthSvrPolicy.ini

// RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REMOVE_DBS

// RUN_TEST_STEP !Result=Fail  100	tAuthSvr 	AUTHENTICATE	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0021b

// RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REG_IDENTITY	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0021a

// RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	AUTHENTICATE	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0021b

// RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	AUTHSVR_CHECK	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0021c

// END_TESTCASE SEC-AUT-AUTHSVR-0021

//============================================================

//

// //! @SYMTestCaseID SEC-AUT-AUTHSVR-0022

// //! @SYMTestCaseDesc , Attempt to register a new identity, while a specific plugin inactive, the plugin should be remain untrained

// //! 		        (RegisterIdentity2_NoActivePlugin)

// //! @SYMREQ REQ4941 REQ4943 REQ4953 REQ4954

// //! @SYMTestPriority Medium

// //! @SYMTestActions  Start the authServer with no identities. 

// //!			Have a default plugin defined, which is inactive,

// //!			use a client that has ReadDeviceData capability to connect to the AuthServer, 

// //!			call the Enumerate Plugins API

// //! @SYMTestExpectedResults Specific plugin is untrained

// //! @SYMDevelopedForRelease Intulo

// START_TESTCASE SEC-AUT-AUTHSVR-0022

// RUN_UTILS MakeReadWrite c:\tauth\tAuthSvr\testdata\AuthSvrPolicy.ini

// RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REMOVE_DBS

// RUN_TEST_STEP !RESULT=-2 100	tAuthSvr 	AUTHENTICATE	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0022b

// RUN_TEST_STEP !RESULT=-2  100	tAuthSvr 	REG_IDENTITY	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0022a

// RUN_TEST_STEP !RESULT=-2  100	tAuthSvr 	AUTHENTICATE	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0022b

// RUN_TEST_STEP !RESULT=-2  100	tAuthSvr 	AUTHSVR_CHECK	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0022c

// // END_TESTCASE SEC-AUT-AUTHSVR-0022

//============================================================

// ////

// //! @SYMTestCaseID SEC-AUT-AUTHSVR-0023

// //! @SYMTestCaseDesc Attempt to register a new identity, while no plugins are active, then one is activated.

// //! 		        (RegisterIdentity3_PluginActivatedLater

// //! @SYMREQ REQ4954 REQ4960 REQ4962 REQ4968 REQ4957

// //! @SYMTestPriority Medium

// //! @SYMTestActions  Have a default plugin defined, which is inactive, and a second one which is inactive

// //!			use a client that has ReadDeviceData capability to connect to the AuthServer, 

// //!			call the Enumerate Plugins API

// //! @SYMTestExpectedResults Default plugin is untrained, then fully trained after the 2nd try

// //! @SYMDevelopedForRelease Intulo

// START_TESTCASE SEC-AUT-AUTHSVR-0023

// //RUN_UTILS MakeReadWrite c:\tauth\tAuthSvr\testdata\AuthSvrPolicy.ini

RUN_UTILS MKDIR C:\testplugin_active\

// RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REMOVE_DBS

// RUN_TEST_STEP !RESULT=-2  100	tAuthSvr 	AUTHENTICATE	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0023b

// RUN_TEST_STEP !RESULT=-2  100	tAuthSvr 	REG_IDENTITY	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0023a

// RUN_TEST_STEP !RESULT=-2  100	tAuthSvr 	AUTHENTICATE	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0023b

// RUN_TEST_STEP !RESULT=-2  100	tAuthSvr 	AUTHSVR_CHECK	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0023c

// RUN_TEST_STEP_RESULT 0  100	tAuthSvr 	REMOVE_DBS

// RUN_TEST_STEP !RESULT=-2  100	tAuthSvr 	AUTHENTICATE	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0023b

// RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REG_IDENTITY	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0023d

// RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	AUTHENTICATE	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0023f

// RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	AUTHSVR_CHECK	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0023e

// END_TESTCASE SEC-AUT-AUTHSVR-0023

//============================================================

////

//! @SYMTestCaseID SEC-AUT-AUTHSVR-0024

//! @SYMTestCaseDesc Attempt to register a new identity, but the transient key obtained from one of auth Plugin is non-unique.

//! 		     (RegisterIdentity4_NonUniqueTransientkey)

//! @SYMREQ REQ4953 REQ4954 REQ4955 REQ4957 REQ4958

//! @SYMTestPriority Medium

//! @SYMTestActions  Have a default plugin defined, which is inactive, and a second one which is inactive

//!			use a client that has ReadDeviceData capability to connect to the AuthServer, 

//!			call the Enumerate Plugins API

//!			Try to register a 2nd identity while using the same 'Entered-Pin' as for the default identity.

//! @SYMTestExpectedResults KErrAuthServPluginCancelled is received, then the plugin is showed as 

//!				partially trained, not fully trained

//! @SYMDevelopedForRelease Intulo

START_TESTCASE SEC-AUT-AUTHSVR-0024

RUN_UTILS MKDIR C:\testplugin_active\

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REMOVE_DBS

RUN_TEST_STEP !RESULT=Fail 100	tAuthSvr 	AUTHENTICATE	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0024b

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REG_IDENTITY	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0024a

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	AUTHENTICATE	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0024b

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	AUTHSVR_CHECK	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0024c

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	AUTHSVR_CHECK	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0024d

RUN_UTILS DELETEDIRECTORY C:\testplugin_active\

END_TESTCASE SEC-AUT-AUTHSVR-0024 

//============================================================

////

//! @SYMTestCaseID SEC-AUT-AUTHSVR-0025

//! @SYMTestCaseDesc Attempt to register a new identity, but a plugin returns the cancellation code

//! 		     (RegisterIdentity5_PluginCancel)

//! @SYMREQ REQ4954 REQ4955 REQ4958 REQ4968 REQ4970 4971 4972

//! @SYMTestPriority Medium

//! @SYMTestActions  Have a default plugin defined, which is inactive, and a second one which is inactive

//!			use a client that has ReadDeviceData capability to connect to the AuthServer, 

//!			call the Enumerate Plugins API

//!			Try to register a 2nd identity while using the 'Cancel' code as the PIN input

//! @SYMTestExpectedResults KErrAuthServPluginCancelled is received, then the plugin is showed as 

//!				partially trained, not fully trained

//! @SYMDevelopedForRelease Intulo

START_TESTCASE SEC-AUT-AUTHSVR-0025

RUN_UTILS MKDIR C:\testplugin_active\

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REMOVE_DBS

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	AUTHSVR_CHECK	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0025a

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	AUTHSVR_CHECK	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0025b

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REG_IDENTITY	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0025c

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	AUTHSVR_CHECK	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0025d

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	AUTHSVR_CHECK	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0025e

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	AUTHENTICATE	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0025f

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	RETRAIN_PLUGIN	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0025g

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	AUTHSVR_CHECK	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0025d

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	AUTHSVR_CHECK	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0025h

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	AUTHENTICATE	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0025i

RUN_UTILS DELETEDIRECTORY C:\testplugin_active\

END_TESTCASE SEC-AUT-AUTHSVR-0025

//============================================================

////

//! @SYMTestCaseID SEC-AUT-AUTHSVR-0026

//! @SYMTestCaseDesc Attempt to register a new identity, but a plugin returns the 'quit' code

//! 		     (RegisterIdentity6_PluginExit)

//! @SYMREQ REQ4954 REQ4955 REQ4958 REQ4968 REQ4970 4971 4972

//! @SYMTestPriority Medium

//! @SYMTestActions  Have a default plugin defined, which is inactive, and a second one which is inactive

//!			use a client that has ReadDeviceData capability to connect to the AuthServer, 

//!			call the Enumerate Plugins API

//!			Try to register a 2nd identity while using the 'Quit' code as the PIN input

//! @SYMTestExpectedResults KErrAuthServPluginQuit is received, then the plugin is showed as 

//!				partially trained, not fully trained

//! @SYMDevelopedForRelease Intulo

START_TESTCASE SEC-AUT-AUTHSVR-0026

RUN_UTILS MKDIR C:\testplugin_active\

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REMOVE_DBS

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REG_IDENTITY	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0026a

RUN_TEST_STEP !RESULT=Fail 100	tAuthSvr 	AUTHENTICATE	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0026b

END_TESTCASE SEC-AUT-AUTHSVR-0026

////

//! @SYMTestCaseID SEC-AUT-AUTHSVR-0027

//! @SYMTestCaseDesc Attempt to register a new identity, but the authserver cannot uniquely resolve the identity with any of the supplied plugins

//! 		     (RegisterIdentity7_NonUniqueIdentity_Retrain)

//! @SYMREQ REQ4953 REQ4954 4955 4956 

//! @SYMTestPriority Medium

//! @SYMTestActions  Have a default plugin defined, which is active, and two others which are active

//!			use a client that has ReadDeviceData capability to connect to the AuthServer, 

//!			call the Enumerate Plugins API

//!			Try to register a 2nd identity while using the '0000' code as the PIN input

//! @SYMTestExpectedResults The second identity is not registered. All the plugins are still 

//!				fully trained

//! @SYMDevelopedForRelease Intulo

START_TESTCASE SEC-AUT-AUTHSVR-0027

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REMOVE_DBS

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REG_IDENTITY	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0027a

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	AUTHSVR_CHECK	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0027b

END_TESTCASE SEC-AUT-AUTHSVR-0027

////

//! @SYMTestCaseID SEC-AUT-AUTHSVR-0028

//! @SYMTestCaseDesc Attempt to register a new identity, but the training for the 2 active plugins is cancelled

//! 		     (RegisterIdentity8_NonUniqueIdentity_AllPluginsCancelled)

//! @SYMREQ REQ4953 REQ4954 4955 4956

//! @SYMTestPriority Medium

//! @SYMTestActions  Have a default plugin defined, which is inactive, and a second one which is inactive

//!			use a client that has ReadDeviceData capability to connect to the AuthServer, 

//!			call the Enumerate Plugins API

//!			Try to register a 2nd identity while using the 'Cancel' code as the PIN input for all 3 plugins

//! @SYMTestExpectedResults The 2nd identity is not registered then the 3 plugins are showed as fully trained

//!			       

//! @SYMDevelopedForRelease Intulo

START_TESTCASE SEC-AUT-AUTHSVR-0028

RUN_UTILS MKDIR C:\testplugin_active\

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REMOVE_DBS

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REG_IDENTITY	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0028a

RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	AUTHSVR_CHECK	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0028b

RUN_UTILS DELETEDIRECTORY C:\testplugin_active\

END_TESTCASE SEC-AUT-AUTHSVR-0028

////

// //! @SYMTestCaseID SEC-AUT-AUTHSVR-0041

// //! @SYMTestCaseDesc Successful attempt at retraining a specified plugin

// //! 		        (RetrainPlug-in1_Normal)

// //! @SYMREQ REQ4953 REQ4954 4955 4956

// //! @SYMTestPriority Medium

// //! @SYMTestActions  Have a default plugin defined, which is active, and a second one which is active as well

// //!			use a client that has ReadDeviceData capability to connect to the AuthServer, 

// //!			call the Enumerate Plugins API

// //!			Successfully register a 2nd identity while using a specified PIN input

// //!			Authenticate then call the Train() function. Use the same PIN input so that the identity trained is one

// //!			that has been previously trained. The plugin status is then checked

// //! @SYMTestExpectedResults The authentication, registration and retrain are successful. The plugin status is 

// //!			fully trained, then fully trained again

// //! @SYMDevelopedForRelease Intulo

// START_TESTCASE SEC-AUT-AUTHSVR-0041

// RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REMOVE_DBS

// RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REG_IDENTITY	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0041a

// RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	AUTHENTICATE	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0041b

// RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	RETRAIN_PLUGIN	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0041c

// RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	AUTHENTICATE	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0041d

// END_TESTCASE SEC-AUT-AUTHSVR-0041

//============================================================

//

//! @SYMTestCaseID SEC-AUT-AUTHSVR-0042

//! @SYMTestCaseDesc Attempt at retraining a specified plugin, but authentication fails

//! 		     (RetrainPlug-in2_AuthFailed)

//! @SYMREQ 4969 4970 4971 4972 4975 4976 4977 4952

//! @SYMTestPriority Medium

//! @SYMTestActions  Have a default plugin defined, which is active, and a second one which is active as well

//!			use a client that has ReadDeviceData capability to connect to the AuthServer, 

//!			call the Enumerate Plugins API

//!			Successfully register a 2nd identity while using a specified PIN input

//!			Authenticate then call the Train() function. Use the a PIN input that has not been used before 

//!			so that no identity is returned as having that PIN. 

//! @SYMTestExpectedResults The registration is successful, the authentication fails, and so the retrain is unsuccessful. 

//!			The plugin status is fully trained, then fully trained again

//! @SYMDevelopedForRelease Intulo

START_TESTCASE SEC-AUT-AUTHSVR-0042 

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REMOVE_DBS

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REG_IDENTITY	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0042a

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	RETRAIN_PLUGIN	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0042b

END_TESTCASE SEC-AUT-AUTHSVR-0042

//============================================================

//

//! @SYMTestCaseID SEC-AUT-AUTHSVR-0043

//! @SYMTestCaseDesc Attempt to retrain a specified plugin, but the plugin is unknown

//! 		     (RetrainPlug-in3_UnknownPlugin)

//! @SYMREQ 4969 4970 4971 4972 4975 4976 4977 4952

//! @SYMTestPriority Medium

//! @SYMTestActions  Have a default plugin defined, which is active, and a second one which is active as well

//!			use a client that has ReadDeviceData capability to connect to the AuthServer, 

//!			call the Enumerate Plugins API

//!			Successfully register a 2nd identity while using a specified PIN input

//!			Authenticate then call the Train() function. Use the a PIN input that has not been used before 

//!			so that no identity is returned as having that PIN. 

//! @SYMTestExpectedResults The registration is successful, the authentication fails, and so the retrain are unsuccessful. 

//!			The plugin status is fully trained, then trained

//! @SYMDevelopedForRelease Intulo

START_TESTCASE SEC-AUT-AUTHSVR-0043

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REMOVE_DBS

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REG_IDENTITY	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0043a

//RUN_TEST_STEP_RESULT 106 100	tAuthSvr 	RETRAIN_PLUGIN	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0043b

END_TESTCASE SEC-AUT-AUTHSVR-0043

//============================================================

//

//! @SYMTestCaseID SEC-AUT-AUTHSVR-0044

//! @SYMTestCaseDesc Attempt to retrain a specified plugin, but the 2nd authentication fails

//! 		     (RetrainPlug-in4_2ndAuthFailed)

//! @SYMREQ 4969 4970 4971 4972 4975 4976 4977 4978 4952

//! @SYMTestPriority Medium

//! @SYMTestActions  Have a default plugin defined, which is active, and a second one which is active as well

//!			use a client that has ReadDeviceData capability to connect to the AuthServer, 

//!			call the Enumerate Plugins API

//!			Successfully register a 2nd identity while using a specified PIN input

//!			Authenticate then call the Train() function. Use the a PIN input that was used before so that the 

//!			2nd identity is returned. A new PIN is now associated with the identity and that plugin

//!			Attempt the authentication again, but using a wrong PIN. 

//! @SYMTestExpectedResults The registration is successful, The first 'authenticate' and 'train' calls succeed. 

//!			The 2nd authentication fails, and so the 2nd call to train is unsuccessful. 

//!			The plugin status is fully trained, all three times that it is checked

//! @SYMDevelopedForRelease Intulo

START_TESTCASE SEC-AUT-AUTHSVR-0044

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REMOVE_DBS

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REG_IDENTITY	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0044a

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	RETRAIN_PLUGIN	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0044b

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	RETRAIN_PLUGIN	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0044c

END_TESTCASE SEC-AUT-AUTHSVR-0044

//============================================================

//

//! @SYMTestCaseID SEC-AUT-AUTHSVR-0045

//! @SYMTestCaseDesc Attempt to retrain a specified plugin, but a non-unique transient key is generated, prompting 

//!			the retrain to be cancelled

//! 		     (RetrainPlug-in5_NonUniqueTransientKey)

//! @SYMREQ 4969 4970 4971 4972 4975 4976 4977 4978

//! @SYMTestPriority Medium

//! @SYMTestActions  Have a default plugin defined, which is active, and a second one which is active as well

//!			use a client that has ReadDeviceData capability to connect to the AuthServer, 

//!			call the Enumerate Plugins API

//!			Successfully register a 2nd identity while using a specified PIN input

//!			Authenticate then call the Train() function. Use the a PIN input that has not been used before 

//!			so that the retrain is cancelled.

//! @SYMTestExpectedResults The registration is successful, the authentication fails, and so the retrain are unsuccessful. 

//!			The plugin status is fully trained, then fully trained again

//! @SYMDevelopedForRelease Intulo

START_TESTCASE SEC-AUT-AUTHSVR-0045

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REMOVE_DBS

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REG_IDENTITY	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0045a

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	RETRAIN_PLUGIN	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0045b

END_TESTCASE SEC-AUT-AUTHSVR-0045

//============================================================

//

//! @SYMTestCaseID SEC-AUT-AUTHSVR-0046

//! @SYMTestCaseDesc Attempt to retrain a specified plugin, but a cancellation code is entered at the 'retrain' stage

//! 		     (RetrainPlug-in6_Cancel)

//! @SYMREQ 4969 4970 4971 4972 4975 4976 4977 4978

//! @SYMTestPriority Medium

//! @SYMTestActions  Have a default plugin defined, which is active, and a second one which is active as well

//!			use a client that has ReadDeviceData capability to connect to the AuthServer, 

//!			call the Enumerate Plugins API

//!			Successfully register a 2nd identity while using a specified PIN input

//!			Authenticate then call the Train() function. Use the a cancellation code as the input

//!			so that the retrain is cancelled.

//! @SYMTestExpectedResults The registration is successful, the authentication fails, and so the retrain are unsuccessful. 

//!			The plugin status is fully trained, then fully trained again

//! @SYMDevelopedForRelease Intulo

START_TESTCASE SEC-AUT-AUTHSVR-0046

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REMOVE_DBS

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REG_IDENTITY	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0046a

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	RETRAIN_PLUGIN	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0046b

END_TESTCASE SEC-AUT-AUTHSVR-0046

//============================================================

//

//! @SYMTestCaseID SEC-AUT-AUTHSVR-0047

//! @SYMTestCaseDesc Attempt to retrain a specified plugin, but a Quit code is entered at the 'retrain' stage

//! 		     (RetrainPlug-in7_Quit)

//! @SYMREQ 4969 4970 4971 4972 4975 4976 4977 4978

//! @SYMTestPriority Medium

//! @SYMTestActions  Have a default plugin defined, which is active, and a second one which is active as well

//!			use a client that has ReadDeviceData capability to connect to the AuthServer, 

//!			call the Enumerate Plugins API

//!			Successfully register a 2nd identity while using a specified PIN input

//!			Authenticate then call the Train() function. Use the a Quit code as the input

//!			so that the retrain is quit.

//! @SYMTestExpectedResults The registration is successful, the authentication fails, and so the retrain are unsuccessful. 

//!			The plugin status is fully trained, then fully trained again

//! @SYMDevelopedForRelease Intulo

START_TESTCASE SEC-AUT-AUTHSVR-0047

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REMOVE_DBS

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REG_IDENTITY	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0047a

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	RETRAIN_PLUGIN	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0047b

END_TESTCASE SEC-AUT-AUTHSVR-0047

//============================================================

//

//! @SYMTestCaseID SEC-AUT-AUTHSVR-0057

//! @SYMTestCaseDesc Successful attempt to retrain a specified plugin, then another. 2nd Authentication required in both cases

//! 		     (RetrainPlug-in8_2ndAuthRequired)

//! @SYMREQ 4969 4970 4971 4972 4975 4976 4977 4978

//! @SYMTestPriority Medium

//! @SYMTestActions  Have a default plugin defined, which is active, and a second one which is active as well

//!			use a client that has ReadDeviceData capability to connect to the AuthServer, 

//!			call the Enumerate Plugins API

//!			Successfully register a 2nd identity while using a specified PIN input

//!			Authenticate then call the Train() function on the first plugin. Use the a valid, unique input

//!			Authtenticate then call the Train function on the second plugin. Use a valid, unique input

//! @SYMTestExpectedResults The registration is successful, the 2nd authentication is successful in both cases, 

//!			as well as the retrain calls.

//!			The plugin status for both plugins is fully trained, then fully trained again

//! @SYMDevelopedForRelease Intulo

START_TESTCASE SEC-AUT-AUTHSVR-0057

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REMOVE_DBS

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REG_IDENTITY	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0048a

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	RETRAIN_PLUGIN	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0048b

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	RETRAIN_PLUGIN	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0048c

END_TESTCASE SEC-AUT-AUTHSVR-0057

//============================================================

//

//! @SYMTestCaseID SEC-AUT-AUTHSVR-0058

//! @SYMTestCaseDesc Successful attempt to retrain a specified plugin, then another. 2nd Authentication required in both cases

//! 		     (RetrainPlug-in8_2ndAuthRequired)

//! @SYMREQ 4969 4970 4971 4972 4975 4976 4977 4978

//! @SYMTestPriority Medium

//! @SYMTestActions  Have a default plugin defined, which is active, and a second one which is active as well

//!			use a client that has ReadDeviceData capability to connect to the AuthServer, 

//!			call the Enumerate Plugins API

//!			Successfully register a 2nd identity while using a specified PIN input

//!			Authenticate then call the Train() function on the first plugin. Use the a valid, unique input

//!			Authtenticate then call the Train function on the second plugin. Use a valid, unique input

//! @SYMTestExpectedResults The registration is successful, the 2nd authentication is successful in both cases, 

//!			as well as the retrain calls.

//!			The plugin status for both plugins is fully trained, then fully trained again

//! @SYMDevelopedForRelease Intulo

START_TESTCASE SEC-AUT-AUTHSVR-0058

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REMOVE_DBS

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REG_IDENTITY	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0048a

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	RETRAIN_PLUGIN	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0048b

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	RETRAIN_PLUGIN	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0048c

END_TESTCASE SEC-AUT-AUTHSVR-0058

//============================================================

//

//! @SYMTestCaseID SEC-AUT-AUTHSVR-0061

//! @SYMTestCaseDesc Attempt to add a new authentication method first to one then the second of the

//!			two present identities

//! 		     (AddAuthMethod1_BothIdentities_Normal)

//! @SYMREQ 4969 4970 4971 4972 4975 4976 4977 4978

//! @SYMTestPriority Medium

//! @SYMTestActions  Have a default plugin defined, which is active, and a second one which is inactive

//!			use a client that has ReadDeviceData capability to connect to the AuthServer, 

//!			call the Enumerate Plugins API

//!			Successfully register a 2nd identity while using a specified PIN input with the default plugin only

//!			Authenticate then call the Train() function. Use an identifying input that corresponds to what

//!			was used to register the default identity using the default plugin. Therefore the default identity

//!			is returned following the Authentication. The training is then done for the 2nd plugin

//!			Carry out the same process with the second identity

//! @SYMTestExpectedResults The authentication is successful,  and the first train call passes.

//!			but the second train call passes as well

//!			The plugin status for the second plugin is untrained, trained, then fully trained

//!			There are 2 identities present after the register identity step

//! @SYMDevelopedForRelease Intulo

START_TESTCASE SEC-AUT-AUTHSVR-0061

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REMOVE_DBS

//RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	AUTHENTICATE	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0061Test

// RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	REG_IDENTITY	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0061a

// RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	AUTHSVR_CHECK	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0061b

// RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	RETRAIN_PLUGIN	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0061c

// RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	AUTHSVR_CHECK	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0061d

// RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	RETRAIN_PLUGIN	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0061e

// RUN_TEST_STEP_RESULT 0 100	tAuthSvr 	AUTHSVR_CHECK	c:\tauth\tAuthSvr\scripts\tauthsvr3.ini Test0061f

END_TESTCASE SEC-AUT-AUTHSVR-0061

//============================================================

//

//! @SYMTestCaseID SEC-AUT-AUTHSVR-0062

//! @SYMTestCaseDesc Attempt to add a new authentication method first to one then the second of the

//!			two present identities. Authentication fails in both cases.

//! 		     (AddAuthMethod2_BothIdentities_AuthFailed)

//! @SYMREQ 4969 4970 4971 4972 4975 4976 4977 4978

//! @SYMTestPriority Medium

//! @SYMTestActions   Have a default plugin defined, which is active, and a second one which is inactive

//!			use a client that has ReadDeviceData capability to connect to the AuthServer, 

//!			call the Enumerate Plugins API

//!			Successfully register a 2nd identity while using a specified PIN input with the default plugin only

//!			Fail to authenticate then try to call the Train() function. Use an identifying input that does not 

//!			corresponds to what was used to register the default identity using the default plugin. Therefore no identity

//!			is returned following the Authentication. The training is then attempted for the 2nd plugin