// Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies).
// All rights reserved.
// This component and the accompanying materials are made available
// under the terms of "Eclipse Public License v1.0"
// which accompanies this distribution, and is available
// at the URL "http://www.eclipse.org/legal/epl-v10.html".
//
// Initial Contributors:
// Nokia Corporation - initial contribution.
//
// Contributors:
//
// Description:
// USBSRV   Component tests

LOAD_SUITE T_UsbManagerServer

RUN_UTILS MkDir C:\testdata\
RUN_UTILS MkDir C:\testdata\config\
RUN_UTILS CopyFile Z:\testdata\config\stub2cc.ini C:\testdata\config\stub2cc.ini
RUN_UTILS MakeReadWrite C:\testdata\config\stub2cc.ini
RUN_UTILS MkDir c:\private\
RUN_UTILS MkDir c:\private\101fe1db\
RUN_UTILS CopyFile Z:\private\101fe1db\usbman.r01 c:\private\101fe1db\usbman.r01
RUN_UTILS MakeReadWrite c:\private\101fe1db\usbman.r01
// Delay 3 seconds for RUN_UTILS to complete
DELAY 3000

//! @SYMTestCaseID T_LoadPersonalitiesListNormal
//! @SYMTestType CT
//! @SYMTestCaseDesc Test Normal Case for startup USB Server and loading of personality list
//! @SYMFssID USB/DynamicClassChange/1
//! @SYMFssID USB/DynamicClassChange/1.3.1
//! @SYMFssID USB/DynamicClassChange/1.1.1
//! @SYMFssID USB/DynamicClassChange/1.2.2
//! @SYMFssID USB/DynamicClassChange/1.2.3
//! @SYMFssID USB/DynamicClassChange/1.2.3.1
//! @SYMFssID USB/DynamicClassChange/1.2.5
//! @SYMTestActions Create a new session with CUsbServer. It's cause creation of new 
//! CUsbDevice object wich read personality list from resource file and validate them.
//! @SYMTestExpectedResults The personality IDs requested from CUsbDevice should be equal to expected. 
//! Each personality should have expected textual description and UID list of supported CCs  
//! @SYMTestPriority Low
//! @SYMTestStatus Defined
START_TESTCASE T_LoadPersonalitiesListNormal
RUN_TEST_STEP 100 T_UsbManagerServer CUsbLoadPersonalityNormal z:\testdata\config\t_usbmancomponent.ini UsbLoadPersonalityNormal
END_TESTCASE T_LoadPersonalitiesListNormal

//! @SYMTestCaseID T_LoadPersonalitiesListOOM
//! @SYMTestType CT
//! @SYMTestCaseDesc Test startup USB Server and loading of personality list in OOM conditions
//! @SYMFssID USB/DynamicClassChange/1
//! @SYMFssID USB/DynamicClassChange/1.3.1
//! @SYMFssID USB/DynamicClassChange/1.1.1
//! @SYMFssID USB/DynamicClassChange/1.2.3
//! @SYMFssID USB/DynamicClassChange/1.2.5
//! @SYMTestActions Try to create a new session with CUsbServer in OOM conditions. It's cause creation of new 
//! CUsbDevice object which read personality list from recourse file and validate them.
//! @SYMTestExpectedResults Until OOM condition is present RUsb::Conect() method  should fail with KErrNoMemory. 
//! After removing OOM conditions the personality IDs requested from CUsbDevice should equal to expected. 
//! Each personality should have expected textual description and list of supported CCs 
//! @SYMTestPriority Low
//! @SYMTestStatus Defined
START_TESTCASE T_LoadPersonalitiesListOOM
RUN_TEST_STEP 100 T_UsbManagerServer CUsbTestOOM z:\testdata\config\t_usbmancomponent.ini UsbTestOOM 
END_TESTCASE T_LoadPersonalitiesListOOM 

//! @SYMTestCaseID T_SwitchPersonalityNormal
//! @SYMTestType CT
//! @SYMTestCaseDesc Test personality switching
//! @SYMFssID USB/DynamicClassChange/1
//! @SYMFssID USB/DynamicClassChange/1.2.1
//! @SYMFssID USB/DynamicClassChange/1.2.4
//! @SYMFssID USB/DynamicClassChange/1.2.5
//! @SYMTestActions Create a new session with CUsbServer. Compare ID, PID, VID, CC UIDs and description of current personality with expected data. Switch personality and check parameters again.
//! @SYMTestExpectedResults All gotten parameters should match with expected data. 
//! @SYMTestPriority Low
//! @SYMTestStatus Defined
START_TESTCASE T_SwitchPersonalityNormal
RUN_TEST_STEP 100 T_UsbManagerServer CUsbSwitchPersonalityNormal z:\testdata\config\t_usbmancomponent.ini UsbSwitchPersonalityNormal 
END_TESTCASE T_SwitchPersonalityNormal  

//! @SYMTestCaseID T_StartStopPersonality1
//! @SYMTestType CT
//! @SYMTestCaseDesc Test start/stop personality with normal CCs and then with failed to start CC
//! @SYMFssID USB/DynamicClassChange/1
//! @SYMFssID USB/DynamicClassChange/1.3.3
//! @SYMFssID USB/DynamicClassChange/1.4.2
//! @SYMTestActions Create a new session with USB server, Issue TryStart request, try to change personality then TryStop. Switch to personality wich has "failure" stub CC.
//! Try to start this personality
//! @SYMTestExpectedResults The first TryStart request should be completed successfully.
//! The attempt to switch personality should fail. The second TryStart request should return error code signaling about problem with starting CC.
//! @SYMTestPriority Low
//! @SYMTestStatus Defined
START_TESTCASE T_StartStopPersonality1
RUN_UTILS DeleteFile C:\testdata\config\stub1cc.ini
RUN_UTILS CopyFile Z:\testdata\config\stub1cctest.ini C:\testdata\config\stub1cc.ini
RUN_UTILS MakeReadWrite C:\testdata\config\stub1cc.ini
DELAY 1000
RUN_TEST_STEP 100 T_UsbManagerServer CUsbStartStopPersonality1 z:\testdata\config\t_usbmancomponent.ini UsbStartStopPersonality1
RUN_UTILS DeleteFile C:\testdata\config\stub1cc.ini
DELAY 1000
END_TESTCASE T_StartStopPersonality1

//! @SYMTestCaseID T_StartStopPersonality2
//! @SYMTestType CT
//! @SYMTestCaseDesc Test start/stop personality at different USB server's states using TryStart/TryStop methods
//! @SYMFssID USB/DynamicClassChange/1
//! @SYMFssID USB/DynamicClassChange/1.3.3
//! @SYMFssID USB/DynamicClassChange/1.4.2
//! @SYMTestActions Create a new session with USB server, Issue TryStart and TryStop requests at all possible server's states.
//! @SYMTestExpectedResults The requests should be succeeded or failed according to the "State Transition Diagram" chapter from 
//! the "USB Design Document for PREQ 543"
//! @SYMTestPriority Low
//! @SYMTestStatus Defined
START_TESTCASE T_StartStopPersonality2
RUN_TEST_STEP 100 T_UsbManagerServer CUsbStartStopPersonality2 z:\testdata\config\t_usbmancomponent.ini UsbStartStopPersonality2 
END_TESTCASE T_StartStopPersonality2 

//! @SYMTestCaseID T_StartStopPersonality3
//! @SYMTestType CT
//! @SYMTestCaseDesc Test start/stop personality at different USB server's states using Start/Stop methods
//! @SYMFssID USB/DynamicClassChange/1
//! @SYMFssID USB/DynamicClassChange/1.3.2
//! @SYMFssID USB/DynamicClassChange/1.4.1
//! @SYMTestActions Create a new session with USB server, Issue Start and Stop requests at all possible server's states and check state of the USB server.
//! @SYMTestExpectedResults The requests should be succeeded, a finale state of USB manager after each request should be as requested. 
//! @SYMTestPriority Low
//! @SYMTestStatus Defined
START_TESTCASE T_StartStopPersonality3
RUN_TEST_STEP 100 T_UsbManagerServer CUsbStartStopPersonality3 z:\testdata\config\t_usbmancomponent.ini UsbStartStopPersonality3 
END_TESTCASE T_StartStopPersonality3  


//! @SYMTestCaseID T_SwitchPersonalityAbNormal
//! @SYMTestType CT
//! @SYMTestCaseDesc Test personality switching
//! @SYMFssID USB/DynamicClassChange/1
//! @SYMFssID USB/DynamicClassChange/1.2.1
//! @SYMFssID USB/DynamicClassChange/1.2.4
//! @SYMFssID USB/DynamicClassChange/1.2.5
//! @SYMTestActions Create a new session with CUsbServer. Compare ID, PID, VID, CC UIDs and description of current personality with expected data. Switch personality and check parameters again.
//! @SYMTestExpectedResults All gotten parameters should match with expected data. 
//! @SYMTestPriority Low
//! @SYMTestStatus Defined
START_TESTCASE T_SwitchPersonalityAbNormal
RUN_TEST_STEP 100 T_UsbManagerServer CUsbSwitchPersonalityAbNormal z:\testdata\config\t_usbmancomponent.ini UsbSwitchPersonalityAbNormal 
END_TESTCASE T_SwitchPersonalityAbNormal  


//! @SYMTestCaseID T_MemoryAllocationFailure
//! @SYMTestType CT
//! @SYMTestCaseDesc Test handling of memory allocation failure
//! @SYMFssID USB/DynamicClassChange/1
//! @SYMFssID USB/DynamicClassChange/1.3.1
//! @SYMTestActions Create a session with  CUsbServer. Call __UHEAP_FAILNEXT(1) and then call APIs
//! that requirement memory allocation. 
//! @SYMTestExpectedResults all calls should return KErrNoMemory
//! @SYMTestPriority Low
//! @SYMTestStatus Defined
START_TESTCASE T_MemoryAllocationFailure
RUN_TEST_STEP 100 T_UsbManagerServer CMemAllocationFailure
END_TESTCASE T_MemoryAllocationFailure