// Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

// USBSRV   Component tests

LOAD_SUITE T_UsbManagerServer

RUN_UTILS MkDir C:\testdata\

RUN_UTILS MkDir C:\testdata\config\

RUN_UTILS CopyFile Z:\testdata\config\stub2cc.ini C:\testdata\config\stub2cc.ini

RUN_UTILS MakeReadWrite C:\testdata\config\stub2cc.ini

RUN_UTILS MkDir c:\private\

RUN_UTILS MkDir c:\private\101fe1db\

RUN_UTILS CopyFile Z:\private\101fe1db\usbman.r01 c:\private\101fe1db\usbman.r01

RUN_UTILS MakeReadWrite c:\private\101fe1db\usbman.r01

// Delay 3 seconds for RUN_UTILS to complete

DELAY 3000

//! @SYMTestCaseID T_LoadPersonalitiesListNormal

//! @SYMTestType CT

//! @SYMTestCaseDesc Test Normal Case for startup USB Server and loading of personality list

//! @SYMFssID USB/DynamicClassChange/1

//! @SYMFssID USB/DynamicClassChange/1.3.1

//! @SYMFssID USB/DynamicClassChange/1.1.1

//! @SYMFssID USB/DynamicClassChange/1.2.2

//! @SYMFssID USB/DynamicClassChange/1.2.3

//! @SYMFssID USB/DynamicClassChange/1.2.3.1

//! @SYMFssID USB/DynamicClassChange/1.2.5

//! @SYMTestActions Create a new session with CUsbServer. It's cause creation of new 

//! CUsbDevice object wich read personality list from resource file and validate them.

//! @SYMTestExpectedResults The personality IDs requested from CUsbDevice should be equal to expected. 

//! Each personality should have expected textual description and UID list of supported CCs  

//! @SYMTestPriority Low

//! @SYMTestStatus Defined

START_TESTCASE T_LoadPersonalitiesListNormal

RUN_TEST_STEP 100 T_UsbManagerServer CUsbLoadPersonalityNormal z:\testdata\config\t_usbmancomponent.ini UsbLoadPersonalityNormal

END_TESTCASE T_LoadPersonalitiesListNormal

//! @SYMTestCaseID T_LoadPersonalitiesListOOM

//! @SYMTestType CT

//! @SYMTestCaseDesc Test startup USB Server and loading of personality list in OOM conditions

//! @SYMFssID USB/DynamicClassChange/1

//! @SYMFssID USB/DynamicClassChange/1.3.1

//! @SYMFssID USB/DynamicClassChange/1.1.1

//! @SYMFssID USB/DynamicClassChange/1.2.3

//! @SYMFssID USB/DynamicClassChange/1.2.5

//! @SYMTestActions Try to create a new session with CUsbServer in OOM conditions. It's cause creation of new 

//! CUsbDevice object which read personality list from recourse file and validate them.

//! @SYMTestExpectedResults Until OOM condition is present RUsb::Conect() method  should fail with KErrNoMemory. 

//! After removing OOM conditions the personality IDs requested from CUsbDevice should equal to expected. 

//! Each personality should have expected textual description and list of supported CCs 

//! @SYMTestPriority Low

//! @SYMTestStatus Defined

START_TESTCASE T_LoadPersonalitiesListOOM

RUN_TEST_STEP 100 T_UsbManagerServer CUsbTestOOM z:\testdata\config\t_usbmancomponent.ini UsbTestOOM 

END_TESTCASE T_LoadPersonalitiesListOOM 

//! @SYMTestCaseID T_SwitchPersonalityNormal

//! @SYMTestType CT

//! @SYMTestCaseDesc Test personality switching

//! @SYMFssID USB/DynamicClassChange/1

//! @SYMFssID USB/DynamicClassChange/1.2.1

//! @SYMFssID USB/DynamicClassChange/1.2.4

//! @SYMFssID USB/DynamicClassChange/1.2.5

//! @SYMTestActions Create a new session with CUsbServer. Compare ID, PID, VID, CC UIDs and description of current personality with expected data. Switch personality and check parameters again.

//! @SYMTestExpectedResults All gotten parameters should match with expected data. 

//! @SYMTestPriority Low

//! @SYMTestStatus Defined

START_TESTCASE T_SwitchPersonalityNormal

RUN_TEST_STEP 100 T_UsbManagerServer CUsbSwitchPersonalityNormal z:\testdata\config\t_usbmancomponent.ini UsbSwitchPersonalityNormal 

END_TESTCASE T_SwitchPersonalityNormal  

//! @SYMTestCaseID T_StartStopPersonality1

//! @SYMTestType CT

//! @SYMTestCaseDesc Test start/stop personality with normal CCs and then with failed to start CC

//! @SYMFssID USB/DynamicClassChange/1

//! @SYMFssID USB/DynamicClassChange/1.3.3

//! @SYMFssID USB/DynamicClassChange/1.4.2

//! @SYMTestActions Create a new session with USB server, Issue TryStart request, try to change personality then TryStop. Switch to personality wich has "failure" stub CC.

//! Try to start this personality

//! @SYMTestExpectedResults The first TryStart request should be completed successfully.

//! The attempt to switch personality should fail. The second TryStart request should return error code signaling about problem with starting CC.

//! @SYMTestPriority Low

//! @SYMTestStatus Defined

START_TESTCASE T_StartStopPersonality1

RUN_UTILS DeleteFile C:\testdata\config\stub1cc.ini

RUN_UTILS CopyFile Z:\testdata\config\stub1cctest.ini C:\testdata\config\stub1cc.ini

RUN_UTILS MakeReadWrite C:\testdata\config\stub1cc.ini

DELAY 1000

RUN_TEST_STEP 100 T_UsbManagerServer CUsbStartStopPersonality1 z:\testdata\config\t_usbmancomponent.ini UsbStartStopPersonality1

RUN_UTILS DeleteFile C:\testdata\config\stub1cc.ini

DELAY 1000

END_TESTCASE T_StartStopPersonality1

//! @SYMTestCaseID T_StartStopPersonality2

//! @SYMTestType CT

//! @SYMTestCaseDesc Test start/stop personality at different USB server's states using TryStart/TryStop methods

//! @SYMFssID USB/DynamicClassChange/1

//! @SYMFssID USB/DynamicClassChange/1.3.3

//! @SYMFssID USB/DynamicClassChange/1.4.2

//! @SYMTestActions Create a new session with USB server, Issue TryStart and TryStop requests at all possible server's states.

//! @SYMTestExpectedResults The requests should be succeeded or failed according to the "State Transition Diagram" chapter from 

//! the "USB Design Document for PREQ 543"

//! @SYMTestPriority Low

//! @SYMTestStatus Defined

START_TESTCASE T_StartStopPersonality2

RUN_TEST_STEP 100 T_UsbManagerServer CUsbStartStopPersonality2 z:\testdata\config\t_usbmancomponent.ini UsbStartStopPersonality2 

END_TESTCASE T_StartStopPersonality2 

//! @SYMTestCaseID T_StartStopPersonality3

//! @SYMTestType CT

//! @SYMTestCaseDesc Test start/stop personality at different USB server's states using Start/Stop methods

//! @SYMFssID USB/DynamicClassChange/1

//! @SYMFssID USB/DynamicClassChange/1.3.2

//! @SYMFssID USB/DynamicClassChange/1.4.1

//! @SYMTestActions Create a new session with USB server, Issue Start and Stop requests at all possible server's states and check state of the USB server.

//! @SYMTestExpectedResults The requests should be succeeded, a finale state of USB manager after each request should be as requested. 

//! @SYMTestPriority Low

//! @SYMTestStatus Defined

START_TESTCASE T_StartStopPersonality3

RUN_TEST_STEP 100 T_UsbManagerServer CUsbStartStopPersonality3 z:\testdata\config\t_usbmancomponent.ini UsbStartStopPersonality3 

END_TESTCASE T_StartStopPersonality3  

//! @SYMTestCaseID T_SwitchPersonalityAbNormal

//! @SYMTestType CT

//! @SYMTestCaseDesc Test personality switching

//! @SYMFssID USB/DynamicClassChange/1

//! @SYMFssID USB/DynamicClassChange/1.2.1

//! @SYMFssID USB/DynamicClassChange/1.2.4

//! @SYMFssID USB/DynamicClassChange/1.2.5

//! @SYMTestActions Create a new session with CUsbServer. Compare ID, PID, VID, CC UIDs and description of current personality with expected data. Switch personality and check parameters again.

//! @SYMTestExpectedResults All gotten parameters should match with expected data. 

//! @SYMTestPriority Low

//! @SYMTestStatus Defined

START_TESTCASE T_SwitchPersonalityAbNormal

RUN_TEST_STEP 100 T_UsbManagerServer CUsbSwitchPersonalityAbNormal z:\testdata\config\t_usbmancomponent.ini UsbSwitchPersonalityAbNormal 

END_TESTCASE T_SwitchPersonalityAbNormal  

//! @SYMTestCaseID T_MemoryAllocationFailure

//! @SYMTestType CT

//! @SYMTestCaseDesc Test handling of memory allocation failure

//! @SYMFssID USB/DynamicClassChange/1

//! @SYMFssID USB/DynamicClassChange/1.3.1

//! @SYMTestActions Create a session with  CUsbServer. Call __UHEAP_FAILNEXT(1) and then call APIs

//! that requirement memory allocation. 

//! @SYMTestExpectedResults all calls should return KErrNoMemory

//! @SYMTestPriority Low

//! @SYMTestStatus Defined

START_TESTCASE T_MemoryAllocationFailure

RUN_TEST_STEP 100 T_UsbManagerServer CMemAllocationFailure

END_TESTCASE T_MemoryAllocationFailure