#

# Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).

# All rights reserved.

# This component and the accompanying materials are made available

# under the terms of "Eclipse Public License v1.0"

# which accompanies this distribution, and is available

# at the URL "http://www.eclipse.org/legal/epl-v10.html".

#

# Initial Contributors:

# Nokia Corporation - initial contribution.

#

# Contributors:

#

# Description:

#   USE-CASE-1: Standard PPP session.

#   UP-TO-DATE

#   (1)	Setup a PPP session between the MN and the PDSN. The PDSN will attach the session

#	to the 192.168.200.x network, which has appropriate routes setup throughout 

#	the inter-network. 

#   (2)	Wait for a signal to bring down the link.

#   (3)	Tell the PDSN to close the PPP connection and send a TERM-ACK. Wait for the MN

#	side to shut itself down cleanly.

#

#######################################################################################

#

# MOBSTER:  Create an MT on the MN and the PDSN and link them to each other. Packetise

#			PPP frames before sending them over the network.

#

#######################################################################################

runcmd svcid=5 svchost="penmn" methodid=3 DATALINKCONFIG=2 FILTERCONFIG=0

	assign mt0=RESULT

runcmd svcid=5 svchost="penpdsn" methodid=3 DATALINKCONFIG=2 FILTERCONFIG=0

	assign mt1=RESULT

runcmd svcid=9 svchost="localhost" methodid=1 PERIOD=2000

runcmd svcid=5 svchost="penmn" methodid=4 DEVICEID=mt0

	assign local_uu_port0=AIR_INPORT

runcmd svcid=5 svchost="penpdsn" methodid=4 DEVICEID=mt1

	assign local_uu_port1=AIR_INPORT

runcmd svcid=5 svchost="penmn" methodid=10 DEVICEID=mt0 REMOTE_ADDRESS="192.169.10.11" REMOTE_PORT=local_uu_port1

	check RESULT=0

runcmd svcid=5 svchost="penpdsn" methodid=10 DEVICEID=mt1 REMOTE_ADDRESS="10.22.1.6" REMOTE_PORT=local_uu_port0

	check RESULT=0

#######################################################################################

#

# PPP:	Create a session on each machine using the new MTs. The PDSN session will 

#		specify the IP addresses which the other side will accept.

#

#######################################################################################

runcmd svcid=7 svchost="penmn"   methodid=31 MADDR="localhost" MPORT=7000 MTID=mt0 CONFIG="defaultroute noauth debug nodetach"

	assign sid0=RESULT

runcmd svcid=7 svchost="penpdsn" methodid=31 MADDR="localhost" MPORT=7000 MTID=mt1 CONFIG="defaultroute noauth 192.168.200.20:192.168.200.10 debug nodetach"

	assign sid1=RESULT

#######################################################################################

#

# PPP:	Wait for the session to become established

#

#######################################################################################

runcmd svcid=7 svchost="penmn"	 methodid=7 SID=sid0

	waitfor SESSION_STATUS=2

	check RESULT=0

runcmd svcid=7 svchost="penpdsn" methodid=7 SID=sid1

	waitfor SESSION_STATUS=2

	check RESULT=0

runcmd svcid=7 svchost="penmn"	 methodid=7 SID=sid0

runcmd svcid=7 svchost="penpdsn" methodid=7 SID=sid1

#######################################################################################

#

# CONNECTION ESTABLISHED: Now do what you want with the connection

#

#######################################################################################

signal

waitforsignal

#######################################################################################

#

# PPP:	Stop the PPP session from the PDSN side and wait for the MN to exit. Retrieve

#		all logs before removing the objects.

#

#######################################################################################

runcmd svcid=7 svchost="penpdsn" methodid=6 SID=sid1

	check RESULT=0

runcmd svcid=7 svchost="penpdsn" methodid=8 SID=sid1

runcmd svcid=7 svchost="penpdsn" methodid=32 SID=sid1

	check RESULT=0

runcmd svcid=7 svchost="penmn"	methodid=7 SID=sid0

	waitfor SESSION_PROCESS_STATUS=3

	check RESULT=0

	check SESSION_STATUS=4

runcmd svcid=7 svchost="penmn" methodid=8 SID=sid0

runcmd svcid=7 svchost="penmn" methodid=32 SID=sid0

	check RESULT=0

#######################################################################################

#

# MOBSTER: Remove the mobster devices, they should already have stopped

#

#######################################################################################

runcmd svcid=5  svchost="penmn"		methodid=6 DEVICEID=mt0

	check RESULT=0

runcmd svcid=5  svchost="penmn"		methodid=7 DEVICEID=mt0

	check RESULT=0

runcmd svcid=5  svchost="penpdsn"	methodid=6 DEVICEID=mt1

	check RESULT=0

runcmd svcid=5  svchost="penpdsn"	methodid=7 DEVICEID=mt1

	check RESULT=0

#######################################################################################

#

# DONE

#

#######################################################################################

rendezvous