<?xml version="1.0" encoding="utf-8"?>

<!-- Copyright (c) 2007-2010 Nokia Corporation and/or its subsidiary(-ies) All rights reserved. -->

<!-- This component and the accompanying materials are made available under the terms of the License 

"Eclipse Public License v1.0" which accompanies this distribution, 

and is available at the URL "http://www.eclipse.org/legal/epl-v10.html". -->

<!-- Initial Contributors:

    Nokia Corporation - initial contribution.

Contributors: 

-->

<!DOCTYPE concept

  PUBLIC "-//OASIS//DTD DITA Concept//EN" "concept.dtd">

<concept id="GUID-E2641957-8163-5EF4-B282-FC3FD9CA75A6" xml:lang="en"><title>Sound

Driver Technology</title><shortdesc>Describes the technology concepts that are used in the Sound Driver. </shortdesc><prolog><metadata><keywords/></metadata></prolog><conbody>

<section id="GUID-CBC17614-34B3-52A1-9C74-F7093A175398"><title>Audio hardware

device</title> <p>An audio hardware device is an individual hardware codec

device together with any associated controller hardware that allows the CPU

to communicate with it. </p> <p>A basic audio hardware device typically provides

two communication paths: an input path for the audio recording and an output

path for audio playback. </p> <p>Most basic audio hardware devices support

full duplex data transfer although some are only half-duplex or maybe just

simplex. Each input or output path may be used to transfer mono data or stereo

data. In the case of stereo this consists of two audio channels, the left

and the right; mono data consists of just a single audio channel. </p> <p>A

more complex audio hardware device could be an AC 97 codec or similar, plus

its associated controller, which can support multiple input and output paths.

Each input or output path may be used to transfer mono data, stereo data or

'multichannel data'. For example, left, right, centre, left and right surround

and Low-Frequency Effects (LFE). </p> </section>

<section id="GUID-7C8FF32F-2E84-57B1-8962-9EDB4D51FEE6"><title>Unit</title> <p>Units

are used to provide access to the various audio hardware devices. Each unit

supports just one communication path this is either input or output. </p> <p>Clients

of the audio hardware system can open a separate connection to each unit.

The mapping between the units on a given phone and the audio hardware devices

themselves is platform specific; this is determined by the implementer of

the Sound Driver PDD for that platform. </p> <p>A basic full-duplex audio

hardware device is presented as two units, one input/record unit and one output/playback

unit. A more complex audio hardware device such as an AC 97 codec may be represented

to the rest of the OS as a number of audio input and output units. </p> </section>

<section id="GUID-74B14664-8D9D-57D2-B090-709136FEB5E3"><title>Audio channel</title> <p>An

audio channel is a data stream between a client and an audio unit. There are

one or more audio channels per driver channel. </p> </section>

<section id="GUID-4D6A01FE-47E7-5A6F-9DFE-F612B880165B"><title>Driver channel</title> <p>A

driver channel is a session between a client and an audio unit. A client may

have driver channels open on more than one unit. </p> <p><note> The difference

between a driver channel and an audio channel. A driver channel is a session

between the client and an audio device which can consist of one or more audio

channels. An audio channel refers to the audio stream, for example, left or

right output.</note> </p> <fig id="GUID-C3B51755-EDB0-5518-83D1-886E9148D65A">

<title>              The relationship between audio channels and device channels.

           </title>

<image href="GUID-2D98DB88-BA48-5EF8-A5F9-0CB8688B0B63_d0e32099_href.png" placement="inline"/>

</fig> </section>

<section id="GUID-5C66667B-55C0-521D-86E3-67593DB381C9"><title>Mono to stereo

conversion</title> <p>Many codecs that support stereo playback can only accept

audio data that is delivered with the samples for each of the channels interleaved,

for example, LRLRLR. For these audio hardware devices, in order to operate

the channel in mono mode and to play audio data which contains only samples

for a single channel it is necessary to perform mono-to-stereo conversion

on the audio data before delivering it to the codec. So, for a section of

mono audio data that contains three samples, lets call them S1, S2 and S3,

each sample is duplicated, so we have S1,S1,S2,S2,S3,S3, with identical samples

being delivered to each channel. </p> <p>Unfortunately, the only way for the

PDD to implement this conversion is for it to allocate a conversion buffer

and to copy each sample twice into this buffer. The PDD has to allocate a

separate conversion buffer for each simultaneous transfer operation it supports,

for example, for the template playback driver, a conversion buffer count equal

to <xref href="GUID-EE69DF4F-3341-355A-837A-5DA1C8A20A67.dita"><apiname>KTemplateMaxTxDmaRequests</apiname></xref>. </p> <p>When performing conversion

in this manner, the maximum transfer size that the PDD can accept from the

LDD becomes half the size of each conversion buffer, and when configured in

this mode, the value returned to the LDD in response to <xref href="GUID-61CC68CB-A01D-3CA0-93D9-F3717ABD6424.dita#GUID-61CC68CB-A01D-3CA0-93D9-F3717ABD6424/GUID-A47005E5-36B4-3795-A4C0-CB67B43802B5"><apiname>DSoundScPdd::MaxTransferLen</apiname></xref> must

equal this value. </p> <p>Likewise, the record data may be delivered by the

audio hardware device only in stereo format with the data samples for each

channel interleaved. If the driver channel is configured in mono record mode,

stereo to mono conversion has to be performed in the PDD to discard each alternate

sample. </p> </section>

</conbody></concept>