diff -r 7685cec9fd3c -r f2ddfa555b0f doc/api/helium/properties-table.html --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/doc/api/helium/properties-table.html Fri Sep 11 11:54:49 2009 +0100 @@ -0,0 +1,2235 @@ + + + + + + + + + + + + + + + + + + + Properties (Helium API) + + + + + + + + + + + + + + + + + +

+ + + + + + + + + + + +

overview

deprecated

properties-table

index

help

+Helium API + +

+ prev + next

+ frames + no frames + + + + + +

+ + +

+ + + + +

+ Properties table(Sortable) +

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

Property	Description	Edit Status	Type
absolute.prep.root.dir	This will convert absolute path for prep.root.dir if anybody use relative path.	never	string
ado.mapping.file	Path to a INI file that contains the mapping between the ADO from Synergy WA and it's location on the BA.	never	string
ado.quality.mapping.file	Path to a INI file that contains the mapping between the ADO from Synergy WA and it's location on the BA for quality targets.	never	string
antlib.import.module.path	Path where ant XML files dynamically downloaded from jar file.	never	string
archive.max.number.of.threads	Set the maximum number of threads running for archiving (for a parallel job).	allowed	integer
archive.using.ec	Set to true to enable EC zipping	recommended	boolean
ats.aste.drop.file	Path for creation of the drop file during the build. Default is ATS3AsteDrop.zip	discouraged	string
ats.aste.email.list	The property is needed if you want to get an email from ATS server after the tests are executed. There can be one to many semicolon(s) ";" separated email addresses.	recommended	string
ats.aste.plan.name	Modify the plan name if you have understanding of test.xml file or leave it as it is. Deafault value is "plan"	recommended	string
ats.aste.testrun.name	Modify the test-run name if you have understanding of test.xml file or leave it as it is. Deafault value is a string consist of build id, product name, major and minor versions	recommended	string
ats.ctc.enabled	Should be "True" if coverage measurement and dynamic analysis (CTC) tool support is to be used by ATS. Deafault value is "False", the values are case-sensitive.	recommended	string
ats.drop.file	Path for creation of the drop file during the build. Default is ATS3Drop.zip	discouraged	string
ats.drop.location	Server location (UNC path) to save the ATS3Drop file, before sending to the ATS. For example: \\trwsem00\some_folder\. In case, ``ats.script.type`` is set to "import", ATS doesn't need to have access to ats.drop.location, its value can be any local folder on build machine, for example c:\temp (no network share needed).	must	string
ats.email.list	The property is needed if you want to get an email from ATS server after the tests are executed. There can be one to many semicolon(s) ";" separated email addresses.	recommended	string
ats.flash.images	List of flash images (.fpsx files) to install on the phone. It is not recommended to set the value manually however, it is possible.	allowed	string
ats.flashfiles.minlimit	Limit of minimum number of flash files to execute ats-test target, otherwise ATSDrop.zip will not be generated. Default value is "2" files.	recommended	string
ats.password	Password for ATS. This password might be different from NOE or HTTP/UNIX password.	must	string
ats.plan.name	Modify the plan name if you have understanding of test.xml file or leave it as it is. Deafault value is "plan"	recommended	string
ats.product.hwid	Product HardWare ID (HWID) attached to ATS. By default the value of HWID is not set.	recommended	string
ats.product.name	Name of the product to be tested. For example: "PRODUCT"	must	string
ats.report.location	Sets ATS reports store location. Default location is "${publish.dir}/${publish.subdir}"	allowed	string
ats.script.type	There are two types of ats script files to send drop to ATS server, "runx" and "import"; only difference is that with "import" ATS doesn't have to have access rights to testdrop.zip file, as it is sent to the system over http and import doesn't need network shares. If that is not needed "import" should not be used. Default value is "runx" as "import" involves heavy processing on ATS server	recommended	string
ats.server	For example: "4fio00105" or "catstresrv001.cats.noklab.net:80". Default server port is "8080", but it is not allowed between intra and Noklab. Because of this we need to define server port as 80. The host can be different depending on site and/or product.	must	string
ats.target.platform	Sets target platform for compiling test components. Default value is "armv5 urel".	recommended	string
ats.test.timeout	To set test commands execution time limit on ATS3 server, in seconds. Default value is "60".	recommended	string
ats.testrun.name	Modify the test-run name if you have understanding of test.xml file or leave it as it is. Deafault value is a string consist of build id, product name, major and minor versions	recommended	string
ats.trace.enabled	Should be "True" if tracing is needed during the tests running on ATS3. Deafault value is "False", the values are case-sensitive.	recommended	string
ats.username	Username for ATS server. This is NOT the NOE or HTTP/UNIX username.	must	string
binary.root	Defines location of binaries created in build. Used in check-capability target while generating capability scan report.	never	string
branch.name	this along with week.number used to find proper history file based on releases.	allowed	string
build.cache.dir	Directory where Helium can store files on a temporary basis for a user per build.	never	string
build.cache.log.dir	Directory where Helium can store log files on a temporary basis for a user per build.	never	string
build.drive	Substed drive where the build is performed. if not defined then helium should search next available build drive letter and subst autometically	recommended	string
build.drive.notdefined	used to track if build.drive has predefined or not	never	flag
build.duplicates.log	Default name of the build duplicates log file.	discouraged	string
build.errors.limit	Maximum allowable errors in a build.	allowed	number
build.id	A unique ID for the build.	discouraged	string
build.int.db.dir	The directory where the build integer database text files are stored.	discouraged	string
build.log	Defines name of the log file.	never	string
build.log.dir	This is where the build logs are stored.	discouraged	string
build.logging.key.stages	Defines which stages are considered as key stages and logged.	discouraged	string
build.logging.start.stage	Defines at which point logging is started.	discouraged	string
build.name	A general label for this type of build. Currently if not defined, product.name will be used to set this property, but this will likely be removed in future.	must	string
build.output.dir	This is the directory where build output is placed.	never	string
build.property.cache.file	A file where persistent properties for a build should be stored.	never	string
build.sisfiles.dir	This is the directory where sisfiles are placed.	never	string
build.summary.file	This is the file where build summary is stored.	discouraged	string
build.system	This specifies which build system is used. Default for this is ebs You can use ec for Electric Cloud..	allowed	string
build.system.ebs	Defined if build.system is set to "ebs", which is the default.	never	string
build.system.sbs	Defined if ${build.system} is set to "sbs".	never	string
build.temp.dir	A directory for storing temporary build files.	never	string
build.type	The general type of the build. This is used for checking the tools environment. Potential values include core, ido, product.	recommended	string
build.version	Version of the build.	discouraged	string
cache.dir	Root directory where Helium can store files on a temporary basis for a user.	never	string
call.cleanup	Ensures the cleanup-all target is called when the build finishes.	allowed	string
canonical.sysdef.file	The path of the generated canonical System Definition file that contains all the input System Definition file content.	never	string
ccm.base.dir	Directory where CCM operations will be performed.	allowed	string
ccm.cache.xml	Location of the cache.xml file which enables global synergy sessions.	allowed	string
ccm.database	Name of the CCM database to use. No default value.	must	string
ccm.database.path	Path of the CCM database. No default value	discouraged	string
ccm.enabled	Defines that property if you want the ccm-get-input step to be run during the build area preparation.	allowed	string
ccm.engine.host	Engine host of CCM database. No default value.	must	string
ccm.home.dir	Home directory of CCM operations.	must	string
ccmgetinput	To check which ccmgetinput helium will be use	allowed	string
ccmtask.python.script.file	The path for the Python script to handle the ccm task bridge to the ccm.py module.	never	string
ci.min.ba.maintain	Minimal number of build area to keep.	allowed	string
ci.project.config	Location of the configuration that will be generated for the Cruise Control HLMSynergy modificationset.	allowed	string
ci.session.file	Location of the session file which will be created by Helium.	allowed	string
cmaker.component.dir	Location of the cmaker component to install it.	never	string
cmaker.config.dir	Directory where to execute cMaker.	discouraged	string
cmaker.pp.version	Version of PP(NCP) configuration to be exported	recommended	string
cmaker.s60.version	Version of S60(require cmaker.pp.version to be set) configuration to be exported	recommended	string
codescanner.config	Defines the location of a custom configuration for codescanner.	allowed	string
codescanner.format	Defines the format of Codescanner output (html\|xml\|std).	allowed	string
codescanner.log.unique	Defines if the folder for Codescanner output is unique (on\|off).	allowed	string
common.overlay.dir	Location of the common overlay.	must	string
compile.signal.name	Name of the signal to be able to override the compile-main target.	never	string
compile.symbianos	Property must be set if the Symbian System Definition file is included in a build, in order to do full build from source.	never	string
compile.sysdef.dtd.stub	compile.sysdef.dtd.stub	never	string
core.build.version	This Defaults to the ${major.version}.${minor.version} combo and is available so that 1 number can be used (dot can be removed)	allowed	string
core.rom.output.dir	/output/release_flash_images/rnd/core	must	string
create.bom.workarea.root	Your synergy work area directory (Set as the parent of the helium dir by default)	allowed	string
ctool.china.conf	configuration for the chinese variant.	allowed	string
ctool.dir	Location of the configuration tool.	allowed	string
ctool.japan.conf	configuration for the japanese variant.	allowed	string
ctool.region.china	.	never	string
ctool.western.conf	configuration for the western variant.	allowed	string
current.env.config	Internal property used for environment setting in the beginning of the build.	never	string
customer.makefile.target	Default makefile target for running customer iMaker ROM building.	never	string
data.model.file	The data model XML file for the Ant configuration.	never	string
data.model.parsed	The data model XML file for the Ant configuration parsed.	never	string
data.model.xsl	Data Model extra content	allowed	string
database.file	Location of helium database	never	string
delta.ant.file	Temp file	never	string
delta.exclude.commasep	Comma seperated excluded directories from the zip	allowed	string
delta.zip.delete.file	Special Instructions file for SymDEC	never	string
delta.zip.file	The zip file	never	string
delta.zip.file.size	Define the file size of the zipped up released file, this is then used by delta zipping code to determine if a delta zip is required or a full zip should be created. The delta zip will only be published if it is less than 1/2 the size of this property	must	string
delta.zip.location	Output location	never	string
delta.zip.temp.location	Temp location	never	string
diamonds.build.id	The ID assigned to the build by the Diamonds server.	never	string
diamonds.build.url	The full URL to the build entry on the Diamonds server.	never	string
diamonds.compile.summary	Compilation summary file for diamonds.	never	string
diamonds.host	Diamonds server's host address.	discouraged	string
diamonds.listener.configuration.file	Diamonds Configuration file with full path used for diamonds listener.	never	string
diamonds.mail	Email address of diamonds server.	discouraged	string
diamonds.path	Diamonds server build location.	discouraged	string
diamonds.port	Diamonds server port number.	discouraged	string
diamonds.schema	Diamonds rest api schema.	discouraged	string
diamonds.target.list.to.log	List of targets that should be logged in to Diamonds.	discouraged	string
disable.analysis.tool	Set this property to disable Analysis Tool. By default Analysis Tool will run with every build and send api metrics to diamonds but Analysis Tools takes time.	allowed	string
documentation.host	The host server where the Helium documentation is stored.	never	string
documentation.path	The full path on the host server where the Helium documentation is stored.	never	string
documentation.path.root	The root of the path on the host server where the Helium documentation is stored.	never	string
documentation.url.root	Root location of the Helium release documentation.	allowed	string
drop.file.counter	Drop package file counter. Updates its value automatically when a new drop file is created for ATS.	never	integer
ec.allow.duplicates	Setting this to "1" will force xml2mak to generate only warnings (instead of errors) for duplicate components in the component list	discouraged	string
ec.build.class	Build class for Electric Cloud. No default value.	never	string
ec.emake	Location of emake tool.	discouraged	string
ec.history.dir	This specifies the directory where Electric Cloud history files are stored. Currently defined in helium.ant.xml and mapped related to publish.root.dir	discouraged	string
ec.history.option	Should be create for single node build and merge for multi node build.	never	string
ec.historyfile	Temporary location of the EC history file used by the current build.	discouraged	string
ec.makefile.file	Location of the Makefile generated to run the EC build.	discouraged	string
ec.maxagents	Maximum number of agent to be used	allowed	string
ec.mem.limit	memory limit for EC execution. See user guide for more details	never	string
ec.mode	mode is either serial / parallel - default is parallel	allowed	string
ec.scripts.dir	ec scripts location	discouraged	string
ec.sysdef2make	Location of sysdef2make.pl file, which is used to translate system definition files to make files. Internal property that normally does not require changes.	never	string
ec.tools.dir	Location of EC-tools. Passed to environment variable EC_TOOLS_DIR, when calling ecbuild_electric.cmd to execute Electric Cloud build.	discouraged	string
ee_roms.log.file	ee log file location	never	string
ee.makefile.target	Defines make target that is run when creating engineer english images.	allowed	string
ee.rom.output.dir	/output/development_flash_images/engineering_english/logs	must	string
email.ldap.rootdn	Root distinguished name of the LDAP server.	allowed	string
email.ldap.server	Network address of the LDAP server.	allowed	string
email.smtp.server	Network address of the SMTP server.	allowed	string
enabled.aste	Value must be set to execute ats-aste target. for example, 'value="1"'	must	string
enabled.ats	Value must be set to execute ats-test target. for example, 'value="1"'	must	string
epocroot	epocroot path	discouraged	string
error.email.to.list	List of email addresses where email is sent in case of build failure. No default value	never	string
eunit.prepare.zip	Name of eunit zip file. Need to unzip into build area to start eunit test	must	string
eunit.test.package	The EUnit package name to be unzipped on the environment, for executing EUnit tests."	recommended	string
eunitexerunner.flags	Flags for EUnit exerunner can be set by setting the value of this variable. The default flags are set to "/E S60AppEnv /R Off".	must	string
exclude.test.layers	Comma seperated excluded test layers. The test components (mentioned in the excluded test layers) will not be included in the ATS test drops	allowed	string
ext.java.lib.dir	External ant library path	never	string
failonerror	failonerror attribute for exec	never	boolean
file-comparison.bcomp_conf	Defines the location of Beyond Compare configuration file.	allowed	string
file-comparison.bcomp_path	Defines the location of BComp.exe.	allowed	string
file-comparison.left_name	Defines the name of the folder for the left side of comparison.	allowed	string
file-comparison.left_side	The fileset id used on the left side of comparison.	must	string
file-comparison.output	Defines the location where comparison output should be put.	allowed	string
file-comparison.regexp.from	Defines the regexp pattern (in ANT-pattern style) which to mach from given filesets.	allowed	string
file-comparison.regexp.to	Defines the regexp pattern (in ANT-pattern style) what to use in (possible) replacement.	allowed	string
file-comparison.right_name	Defines the name of the folder for the right side of comparison.	allowed	string
file-comparison.right_side	The fileset id used on the right side of comparison.	must	string
flash.config.enabled	Define that property to enable config file generation.	recommended	flag
genxml.output.file	Path for the output XML file generated by genxml used as input to EBS or EC.	never	string
genxml.output.file.suffix	Suffix used in genxml related output files. This value is added into file names to show that they are genxml related. Used in log files, genxml output files and component list for EE images. Normally does not need to be set.	never	string
getenv.tool.location	Defines the location of the getenv.pl script.	never	string
helium.build.dir	The path where Helium-specific outputs are written to.	never	string
helium.ccm.workarea.dir	The path to a Synergy work area used for updating Helium releases.	allowed	string
helium.dir	Defines the logical path to the helium directory used to start a build.	never	string
helium.doc.dir	Location of helium doc src.	never	string
helium.java.lib.dir	helium java library location	never	string
helium.svn.url	SVN URL where to find Helium.	allowed	string
helium.svn.workarea.dir	The path to a Subversion work area used for updating Helium releases.	allowed	string
helium.version	Contains Helium version information	never	string
hlm.enable.asserts	Enable helium asserts. Build will fail if this is enabled and asserts fail.	recommended	string
ido.build.filter	Property is used to define ido build filters in the configuration file.	never	string
ido.cenrep.root	Path to the cenrep root. Default value is "${build.drive}${env.EPOCROOT}/epoc32/tools/cenrep/ido/src"	never	string
ido.cenrep.target	Path to the cenrep target directory. Default value is "${build.drive}${env.EPOCROOT}/epoc32/data/z/private/10202be9"	never	string
ido.codescanner.config	Defines the location of a custom configuration for codescanner.	allowed	string
ido.codescanner.output.dir	Defines the location of Codescanner output.	recommended	string
ido.codescanner.output.type	Defines the format of Codescanner output (html\|xml\|std).	allowed	string
ido.keep.old	Once define this property will enable the backup of old ado before doing the copy.	allowed	string
ido.romtree	Path to the build romtree; the location contains iby files. Default value is "${build.drive}${env.EPOCROOT}/epoc32/rom/include"	never	string
ido.template.robot.ready	Location of the ready.txt FMPP template (override that property if you want to customize the content).	discouraged	string
image_creation.copyto	Path for copying the image files default is output/images	never	string
image_creation.drive	Drive (environment) to use for creating images	never	string
imagetool.cfg.xml.parsed	Locates the parsed configuration for ImageTool in the build directory.	never	string
imagetool.destination	Location where to copy ImageTool and definitions.	allowed	string
imagetool.images	Defines comma separated list of image names.	allowed	string
imagetool.log	Defines name of the ImageTool log file.	never	string
imagetool.output.dir	Defines the location of ImageTool output files.	never	string
imagetool.tooldir	Defines the location of ImageTool.	never	string
imaker.command	The path to the iMaker executable file.	never	string
imaker.engine	Defines which accelerator to use for running iMaker. (default value from build.system property)	never	string
imaker.fmpp.ant	Location of the Ant iMaker execution template.	never	string
imaker.fmpp.makefile	Location of the EC iMaker execution template.	never	string
internal.api.config	Location of the config to parse the build content.	allowed	string
internal.api.output.postbuild	Location of the postbuild ado header content.	allowed	string
internal.api.output.prebuild	Location of the prebuild ado header content.	allowed	string
is.published	The value is either true or false depending on whether the publish property is set or not.	never	string
isis_mktarget.list	Comma separated list of file names(main, what, check file names)	never	string
ivy.file	Location of ivy jar.	never	string
ivy.filename	Name of ivy jar.	never	string
last.major.helium.version	Last major helium version	never	string
loc.output.dir	The directory that will contain the zipped .loc files zip package.	never	string
loc.output.filename	The filename of the zip-loc-files target output zip file.	never	string
loc.temp.dir	The location of temporary directory used during zip-loc-files.	never	string
local.free.space	The amount of free space needed on the build machine in Mbs.	recommended	string
localisation.buildfile	begining of the localisation buildfile name	never	string
localisation.files.china	Localisation files for the China region.	recommended	string
localisation.files.japan	Localisation files for the Japan region.	recommended	string
localisation.files.western	Localisation files for the western region.	recommended	string
localisation.language.file	Defined where to find languages.xml.	never	string
localisation.makefile.target	Makefile target that is executed when creating localised rom images (target localisation-roms).	allowed	string
localisation.s60locfiles.dir	Location of Series 60 localisation input files. Internal property that does not normally needs to be set.	never	string
localisation.tool	This key defines which tool should be used to localise the build area (localisation-mcss-localiser or localisation-s60-localiser).	never	string
log.build.build_id	Diamonds logging information.	never	string
log.build.category	Diamonds logging information.	never	string
log.build.computer	Diamonds logging information.	never	string
log.build.user	Diamonds logging information.	never	string
log.target	Enables logging of the start and end of individual targets.	allowed	string
log4j.cache.dir	Log directory for log4j.	allowed	string
log4j.configuration	Defines the path to log4j configuration.	never	string
logging.output.file	Location of generated logging config.	never	string
major.version	Part of a version information that is used to differentiate a build. Major version is the part that changes less frequently. Ie. year.	allowed	string
md5.signature.file	Output location of md5 file	never	string
md5.split	Number of partial md5 files to use during creation	never	string
metadata.db.file	The path to the SQLite metadata database file.	never	string
minor.version	Part of a version information that is used to differentiate a build. Minor version is the part that changes more frequntly. Ie week or a running number.	allowed	string
network.drive	The drive letter of a substed drive that maps to the network location where the build is published.	recommended	string
network.free.space	Amount of free space in MBs needed on the network drive where the build is published. The ``network.drive`` drive property must also be defined.	allowed	string
notes.database	The Notes database to do DCT5 upload to.	recommended	string
notes.release.dir	The DCT5 Release Notes SW Release Folder (where your build is Published to, so it can be obtained from there.)	never	string
notes.server	Lotus notes server name	recommended	string
number.of.threads	how many parallel threads can run	allowed	string
old.md5.file	A previous builds md5	allowed	string
old.md5.file.present	Is a previous builds md5 being passed manually	allowed	string
overlays.log.file	The path to the overlays output log file.	never	string
parse_abld_what.tool	Location of the parse_what_log.pl tool.	allowed	string
prep.build.dir	This is the directory where the build area is prepared. Once created it is substed to the build.drive.	never	string
prep.config.file	Defines configuration file used in prep-copy target. The file defines how files are copied and extracted into build area.	must	string
prep.delivery.file	Defines configuration file used in synergy operations (ccm-get-input for example). This file contains definition of projects that are checkouted or snapshotted.	must	string
prep.delivery.modificationset	Location where the XML modificationset file should be generated. If not defined the file is not generated. (Usefull for CI systems)	allowed	string
prep.root.dir	The directory where new build area directories are created and substed to the build drive.	recommended	string
product.family	In product builds defines the product family that the build product belong to.	must	string
product.list	In product builds defines the list of products that are build in the configuration. Property is used in rom image creation, localisation release notes creation and data packaging.	must	string
product.printname	A printable name for a product used in release notes.	must	string
product.type	Project ID in release notes.	must	string
programlevel.release.tag	Program level release tag name	allowed	string
publish	Defines whether the build content will be published to the network.	recommended	string
publish.base.dir	Directory where all builds are published. Same as publish.dir but without build.id at the end	never	string
publish.ccm.folder	Synergy folder where you want your task to be published.	allowed	string
publish.dir	Directory where the build is published (includes build.id)	must	string
publish.fileset.ids	The fileset id which will be upload	allowed	string
publish.release.dir	The directory where the release of this build is published to on the local network.	never	string
publish.release.subdir	Subdir part of the publish release dir, relative to publish.root.dir	never	string
publish.root.dir	Defines the root directory of publish feature. Should point into the root of the folder that will contain published nightly builds/releases.	recommended	string
publish.subdir	Subdir part of the publish dir, relative to publish.root.dir	allowed	string
python.modules.path	Python modules path.	allowed	string
qmake.enabled	If defined the qmake stage will be enabled during compilation.	allowed	string
qt.configure.args	The command lines argument passed to the configure tool.	allowed	string
qt.configure.log.name	The name of the Qt configure output log.	never	string
qt.dir	The location of the Qt framework to build.	recommended	string
qt.qmake.ant.template	The location of the ant template to run qmake commands.	allowed	string
qt.qmake.default.args	Setting default arguments to qMake command line, if the qmakeArgs is defined from the system definition file then those arguments are discarded.	allowed	string
read.build.int	This must be set to enable reading the build.number from a text database file located on the network. It allows automated build number incrementing.	allowed	string
release.dir.root	This is the directory which points to release-directory root.	never	string
release.images.dir	The directory where flash images of build can be found	never	string
releasenotes.logo	Defines the logo image file which will be used in release notes.	never	string
releasenotes.output	Location of output rtf file	never	string
releasenotes.output.dir	Defines the directory that will contain the output of release notes creation.	never	string
releasenotes.props	Property file with customer values	never	string
releasenotes.scan2log	Location of scan2log HTML file	never	string
releasenotes.temp.errors	Temp file	never	string
releasenotes.temp.output	Temp file	never	string
releasenotes.temp.props	Temp file	never	string
releasenotes.temp.props2	Temp file	never	string
releasenotes.template	Defines the name of the release note template used.	never	string
relnotes.config.dir	Defines the directory that contains release notes creation configuration files.	must	string
remote.builds.config.file	The path to the configuration file for remote builds.	never	string
required.ant.version	The version of Apache Ant required by Helium.	never	string
robot.email.to	Comma seperated list of email address.	discouraged	string
rombuild.buildinfo.output	Location of the output file.	never	string
rombuild.buildinfo.template	FMPP template to generate a buildinfo makefile.	never	string
rombuild.config.file	This key defines where this parsed file will be located.	must	string
rombuild.config.file.parsed	Locates the parsed configuration for ROM builds.	never	string
rombuild.makefile.name	The filename of the output makefile generated by Helium for iMaker.	allowed	string
rombuild.using.var	Define this property if you build is using Symbian Binary Variation.	allowed	boolean
roms.spec.name	Used to select spec-section in rom image configuration for building. Used only for makefpsx.	never	string
s60.build.robot.date	This property represent the releasing interval. The syntax is as follow: day1,time1,day2,time2,projectname;day1,time1,day2,time2,projectname2 With day and time matching the following properties: day [1, 14] time [00, 23]:[00, 59] Example: 2,10:00,3,20:00,ABS_domain	must	string
s60.build.robot.path	Location where to publish the build robot delivery.	must	string
s60.delta.config.prefix	Define the prefix part of the configuration name that builds delta variant.	allowed	string
s60.getenv.trigger.location	Define the location of the trigger file that should be used by CI.	allowed	string
sbs.config	Configurations for which the components to be built(armv5,winscw)	allowed	string
sbs.hlm.scanlog	Enable helium scanlog for raptor. (experimental temporary solution)	allowed	boolean
sbs.implicit.tools.build	uses tools config to be built before building the actual configuration.	allowed	boolean
sbs.tools.config	tools configuration to be built	allowed	string
selge.ini.network.dir	\\\\vcfiler02\\pub\\flash_user\\Crashbin/working\\selge_ini_prep	must	string
signals.buildexception.signalname	Name of the signal configuration that is used when a signal is fired after catching a BuildException failure.	allowed	string
sis.config.file	Configuration file for SIS-file generation.	recommended	string
skip.ats.sending	Skips sending drop package file to ATS/ASTE after its creation.	allowed	boolean
skip.build.duplicates	This allow you to skip the build duplciates log generation.	allowed	boolean
skip.codescanner	Skip the codescanner target if true (true/yes/on).	allowed	boolean
skip.compile-ec-patch	If defined it skips the buildtools emake patching.	allowed	string
skip.policy-validation	Skip the policy validation target if true (true/yes/on).	allowed	boolean
sms.number	sms numbers to report error or build information.	never	string
sms.server	Server that sends SMSs	allowed	string
src	Source location for junit test class	never	string
src.classes	Java source files location for helium library	never	string
src.dir	java source directory location for helium library	never	string
subcon.build.drive	Build drive for subcon build	never	string
subcon.log.file	The path to the subcon ROMs log.	never	string
subcon.makefile.target	The name of the makefile target for making subcon ROMs.	never	string
subcon.prep.config.file	Subcon prep configuration file location	must	string
subcon.rombuild.config.file	A ROM configuration file for verifying subcon ROMS.	never	string
subcon.zips.dir	The directory where subcon zips are stored.	never	string
sysdef.clean.configurations.list	Comma-separated list of System Definition configuration names to be built in the ido-prep-clean stage. If not defined the sysdef.configurations.list will be used to generate that configuration list.	allowed	string
sysdef.configurations.list	Comma-separated list of System Definition configuration names to be built in the compile-main stage.	must	string
team	Used to specify which team configuration is being used. These configuration files are under /mc/mc_build/teams.	recommended	string
teamlevel.ci.system	Change release tag from team level to product level	allowed	boolean
teamlevel.folder.number	Folder name which contains those tasks to change the release tag	allowed	string
temp.build.dir	Directory to store temporary files generated during the process.	never	string
tools.ivy.config.file	The tools dependencies Ivy settings configuration file.	allowed	string
trace.log.file	The path to the trace ROMs log.	never	string
trace.makefile.target	The name of the makefile target for making trace ROMs.	never	string
tracing.csv.file	Path location for the memory tracing data captured by the TracingLogger.	never	string
tsrc.data.dir	The default value is "data" and refers to the 'data' directory under 'tsrc' directory.	allowed	string
tsrc.path.list	Contains list of the tsrc directories. Gets the list from system definition layer files. Assuming that the test components are defined already in te layers.sysdef.xml files to get compiled. Not recommended, but the property value can be set if there are no system definition file(s), and tsrc directories paths to set manually.	allowed	string
uda.makefile.target	The name of the makefile target for making UDA images.	never	string
unix.password	Unix password	never	string
unix.password.available	Equal 0 if the unix password if available	never	string
unix.username	Unix username.	never	string
unix.username.available	Equal 0 if the unix username if available	never	string
unsubst.after.build	Unsubsted drive after build finished. If not defined then helium should left the drive as subst. Set the value as "yes" if you want to unsubst after build finished.	allowed	string
validate.policy.csv	Location of the CSV file that defines policy IDs.	recommended	string
validate.policy.ignoreroot	Skip the validation of the given root folders.	allowed	boolean
validate.policy.log	Location validate policy xml log.	discouraged	string
validate.policy.log.xml	Location of the LogXML output file.	discouraged	string
validate.policy.pattern	Comma separated list of pattern for policy validation. Defualt value is, distribution.policy.s60,distribution.policy	allowed	string
validate.properties.at.startup	display warnings at build startup if required properties are not defined.	never	string
variant.image.targetpath	Path for copying the variant image files default is under output/variant_images	never	string
week.number	this is used to identify the history files based on releases	allowed	string
zip.config.file	Path to the the zip specification file	recommended	string
zip.config.file.parsed	Path to the parsed file of zip specification file	never	string
zip.ee.log.file	Defines log file where to record archiving of engineering english area.	never	string
zip.localised.log.file	The path to the localization zipping log file.	never	string
zip.subcon_roms.log.file	The log file name for zipping subcon_roms.	never	string
zip.subcon.log.file	Defines log file where to record archiving of subcon environment.	never	string
zip.trace_roms.log.file	The log file name for zipping trace_roms.	never	string
zip.uda_roms.log.file	The log file name for zipping uda_roms.	never	string
zip.wa.file	A unique name for the WA Sources ZIP file.	discouraged	string
zips.build.dir	This is the directory where build area is archived after the build has finished.	never	string
zips.ee.spec.name	the value should be "ee"	allowed	string
zips.flashfiles.dir	This is the directory where flash files are archived.	never	string
zips.loc.dir	This is the directory where build area is archived after the localisation.	never	string