Destructor.

Frees all resources owned by the object prior to its destruction.

Cancels the registered notification event.

Clears the current playback window.

Closes the current audio clip (allowing another clip to be opened).

Returns the controller implementation information associated with the current controller.

Sends an asynchronous custom command to the controller.

Note: This method will return immediately. The RunL of the active object owning the aStatus parameter will be called when the command is completed by the controller framework.

Sends an asynchronous custom command to the controller.

Note: This method will return immediately. The RunL of the active object owning the aStatus parameter will be called when the command is completed by the controller framework.

Sends a synchronous custom command to the controller.

Sends a synchronous custom command to the controller.

Returns the duration of the audio sample in microseconds.

Returns the duration of the audio sample in microseconds, and the duration state.

Returns the current progress of audio loading.

Returns The current playback balance. This function may not return the same value as passed to SetBalance depending on the internal implementation in the underlying components.

Returns the bit rate of the audio clip.

Gets a controller's DRM custom command implementation.

Returns the requested meta data entry.

Returns the number of meta data entries in the current audio clip.

Returns the current playback position in microseconds from the start of the clip.

Returns the current playback volume.

Returns an integer representing the maximum volume.

This is the maximum value which can be passed to CMdaAudioPlayerUtility::SetVolume(). This value is platform independent, but is always greater than or equal to one.

Constructs and initialises a new instance of the audio player utility for playing sampled audio data from a descriptor.

The audio data must be in a supported format (e.g. WAV and AU).

The function leaves if the audio player utility object cannot be created. When initialisation of the audio player utility is complete, successfully or otherwise, the callback function MMdaAudioPlayerCallback::MapcInitComplete() is called.

Note: The Priority Value and Priority Preference are used primarily when deciding what to do when several audio clients attempt to play or record simultaneously. In addition to the Priority Value and Preference, the adaptation may consider other parameters such as the SecureId and Capabilities of the client process. Whatever, the decision as to what to do in such situations is up to the audio adaptation, and may vary between different phones. Portable applications are advised not to assume any specific behaviour.

Constructs and initialises a new instance of the audio player utility for playing sampled audio data from a read only descriptor.

The audio data must be in a supported format (e.g. WAV and AU).

The function leaves if the audio player utility object cannot be created. When initialisation of the audio player utility is complete, successfully or otherwise, the callback function MMdaAudioPlayerCallback::MapcInitComplete() is called.

Note: The Priority Value and Priority Preference are used primarily when deciding what to do when several audio clients attempt to play or record simultaneously. In addition to the Priority Value and Preference, the adaptation may consider other parameters such as the SecureId and Capabilities of the client process. Whatever, the decision as to what to do in such situations is up to the audio adaptation, and may vary between different phones. Portable applications are advised not to assume any specific behaviour.

Constructs and initialises a new instance of the audio player utility for playing sampled audio data from a file. The audio data must be in a supported format (e.g. WAV and AU).

The function leaves if the audio player utility object cannot be created.

When initialisation of the audio player utility is complete, successfully or otherwise, the callback function MMdaAudioPlayerCallback::MapcInitComplete() is called.

Note: The Priority Value and Priority Preference are used primarily when deciding what to do when several audio clients attempt to play or record simultaneously. In addition to the Priority Value and Preference, the adaptation may consider other parameters such as the SecureId and Capabilities of the client process. Whatever, the decision as to what to do in such situations is up to the audio adaptation, and may vary between different phones. Portable applications are advised not to assume any specific behaviour.

Constructs and initialises a new instance of the audio player utility.

The function leaves if the audio player utility object cannot be created.

No callback notification is made upon completion of NewL().

Note: The Priority Value and Priority Preference are used primarily when deciding what to do when several audio clients attempt to play or record simultaneously. In addition to the Priority Value and Preference, the adaptation may consider other parameters such as the SecureId and Capabilities of the client process. Whatever, the decision as to what to do in such situations is up to the audio adaptation, and may vary between different phones. Portable applications are advised not to assume any specific behaviour.

Opens an audio clip from a descriptor.

The audio data must be in a supported format (for example, WAV or AU).

Opens an audio clip from a file.

The audio data must be in a supported format (for example, WAV or AU).

This function leaves with KErrNotReady if there is a previous open statement awaiting notification of completion.

Opens an audio clip from a file.

The audio data must be in a supported format (for example, WAV or AU).

This function leaves with KErrNotReady if there is a previous open statement awaiting notification of completion.

Note: it is generally advisable that the RFile is shared through the call RFs::ShareProtected(). This allows the adaptation to pass it to another process, if that is required. This is particularly true of playing DRM encrypted files.

Opens an audio clip from a file.

The audio data must be in a supported format (for example, WAV or AU).

This function leaves with KErrNotReady if there is a previous open statement awaiting notification of completion.

Opens an audio clip from a URL.

The audio data must be in a supported format (for example, WAV or AU).

Pauses the playback of the audio clip.

Begins playback of audio sample data at the current playback position using the current volume, gain and priority settings.

When playing of the audio sample is complete, successfully or otherwise, the callback function MMdaAudioPlayerCallback::MapcPlayComplete() is called.

If this function is called whilst already playing then MMdaAudioPlayerCallback::MapcPlayComplete will return with the error code KErrNotReady.

Registers the Event for Notification when resource is avaliable.

Registers callback object to receive notifications of audio loading/rebuffering.

Sets the current playback balance.

Defines a window on the audio sample data.

The window is defined in terms of a start and end position. When the current playback position reaches the window end position, or Stop() is called, the current playback position is set to the window start position and playback stops.

The current playback position is not affected by a call to SetPlayWindow() unless it is outside the new playback window, in which case it is set to the window start or end position depending on which one is closer.

The window persists until ClearPlayWindow() is called. Loading new audio sample data without adjusting or clearing the window will result in playback errors if the window is outside the new data.

Sets the current playback position in microseconds from the start of the clip.

Sets the priority for playback. This is used to arbitrate between multiple objects trying to access a single sound device.

Sets the number of times the audio sample is to be repeated during the playback operation.

A period of silence can follow each playing of the sample. The audio sample can be repeated indefinitely.

Set the priority of the controller's sub thread.

This can be used to increase the responsiveness of the audio plugin to minimise any lag in processing. This function should be used with care as it may have knock-on effects elsewhere in the system.

Changes the current playback volume to a specified value.

The volume can be changed before or during playback and is effective immediately. The volume can be set to any value between zero (mute) and the maximum permissible volume (determined using MaxVolume()).

Defines the period over which the volume level is to rise smoothly from nothing to the normal volume level.

Stops playback of the audio sample as soon as possible.

If the audio sample is playing, playback is stopped as soon as possible. If playback is already complete, nothing further happens as a result of calling this function. The callback function MMdaAudioPlayerCallback::MapcPlayComplete() is not called.

Ensures that any subsequent calls to OpenXYZ() will create controllers that share a heap.

The default behaviour is that for each player utility a controller with its own heap is created. Each heap uses a chunk, so using this function avoids situations where the number of chunks per process is limited. The default behaviour is generally to be preferred, and should give lower overall memory usage. However, if many controllers are to be created for a particular thread, then this function should be used to prevent running out of heaps or chunks.

Waits for the client to resume the play even after the default timer expires.

This member is internal and not intended for use.