// Copyright (c) 2010 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of the License "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

// lukasz.forynski@gmail.com

//

// Description:

// Implementation of IIC master channel for a SPI bus.

//

#define DBGPRINT(x)

#define DBG_ERR(x) x

#ifdef _DEBUG

#define DEBUG_ONLY(x) //x

#else

#define DEBUG_ONLY(x)

#endif

// DO NOT CHANGE THESE- trying to tune the driver (unless you really know what you're doing)

// as this this is only for development purpose to tune the driver. Fifo mode is not yet enabled, but this

// doesn't affect operation. After development has been finished - these macros and #ifdefs will be removed

// entirely. For now only SINGLE_MODE should ever be defined.

//#define USE_TX_FIFO

//#define USING_TX_COUNTER

//#define PER_TRANSFER_MODE

#define SINGLE_MODE

#include <assp/omap3530_assp/omap3530_assp_priv.h>

#include <assp/omap3530_assp/omap3530_prcm.h>

#include <drivers/iic.h>

#include "omap3530_spi.h"

#include "psl_init.h"

#include "master.h"

DSpiMasterBeagle::DSpiMasterBeagle(TInt aChannelNumber, TBusType aBusType, TChannelDuplex aChanDuplex) :

	DIicBusChannelMaster(aBusType, aChanDuplex),

	iTransferEndDfc(TransferEndDfc, this, KIicPslDfcPriority)

	{

	iChannelNumber = aChannelNumber;

	iHwBase = KMcSpiRegBase[iChannelNumber];

	DBGPRINT(Kern::Printf("DSpiMasterBeagle::DSpiMasterBeagle: at 0x%x, iChannelNumber = %d", this, iChannelNumber));

	}

TInt DSpiMasterBeagle::DoCreate()

	{

	DBGPRINT(Kern::Printf("HW revision is %x", AsspRegister::Read32(iHwBase + MCSPI_REVISION)));

	TInt r = KErrNone;

	// Create the DFCQ to be used by the channel

	if(!iDfcQ)

		{

		TBuf8<KMaxName> threadName (KIicPslThreadName);

		threadName.AppendNum(iChannelNumber);

		r = Kern::DfcQCreate(iDfcQ, KIicPslThreadPriority, &threadName);

		if(r != KErrNone)

			{

			DBG_ERR(Kern::Printf("DFC Queue creation failed, channel number: %d, r = %d\n", iChannelNumber, r));

			return r;

			}

		}

	// PIL Base class initialization - this must be called prior to SetDfcQ(iDfcQ)

	r = Init();

	if(r == KErrNone)

		{

		// Call base class function to set DFCQ pointers in the required objects

		// This also enables the channel to process transaction requests

		SetDfcQ(iDfcQ);

		// PSL DFCQ initialisation for local DFC

		iTransferEndDfc.SetDfcQ(iDfcQ);

		// Bind interrupts.

		r = Interrupt::Bind(iIrqId, Isr, this);

		if(r < KErrNone)

			{

			DBG_ERR(Kern::Printf("ERROR: InterruptBind error.. %d", r));

			return r;

			}

		}

	// Make sure clocks are enabled (TBD: this could go to 'PowerUp/PowerDown' if using PRM)

	Prcm::SetClockState( Prcm::EClkMcSpi3_F, Prcm::EClkOn );

	Prcm::SetClockState( Prcm::EClkMcSpi3_I, Prcm::EClkOn );

	// TODO:consider auto-idle for PRCM.CM_AUTOIDLE1_CORE

	SetupSpiPins(iChannelNumber);

	return r;

	}

// A static method used to construct the DSpiMasterBeagle object.

DSpiMasterBeagle* DSpiMasterBeagle::New(TInt aChannelNumber, const TBusType aBusType, const TChannelDuplex aChanDuplex)

	{

	DBGPRINT(Kern::Printf("DSpiMasterBeagle::NewL(): ChannelNumber = %d, BusType =%d", aChannelNumber, aBusType));

	DSpiMasterBeagle *pChan = new DSpiMasterBeagle(aChannelNumber, aBusType, aChanDuplex);

	TInt r = KErrNoMemory;

	if(pChan)

		{

		r = pChan->DoCreate();

		}

	if(r != KErrNone)

		{

		delete pChan;

		pChan = NULL;

		}

	return pChan;

	}

// This method is called by the PIL to initiate the transaction. After finishing it's processing,

// the PSL calls the PIL function CompleteRequest to indicate the success (or otherwise) of the request

TInt DSpiMasterBeagle::DoRequest(TIicBusTransaction* aTransaction)

	{

	DBGPRINT(Kern::Printf("\n=>DSpiMasterBeagle::DoRequest (aTransaction=0x%x)\n", aTransaction));

	// If the pointer to the transaction passed in as a parameter, or its associated pointer to the

	// header information is NULL, return KErrArgument

	if(!aTransaction || !GetTransactionHeader(aTransaction))

		{

		return KErrArgument;

		}

	// The PSL operates a simple state machine to ensure that only one transaction is processed

	// at a time - if the channel is currently busy, reject the request (PIL should not try that!)

	if(iState != EIdle)

		{

		return KErrInUse;

		}

	// copy pointer to the transaction

	iCurrTransaction = aTransaction;

	// Configure the hardware to support the transaction

		{

		r = ConfigureInterface();

			{

			}

		}

	return r;

	}

	{

	TConfigSpiV01 &newHeader = (*(TConfigSpiBufV01*) (GetTransactionHeader(iCurrTransaction)))();

	// get the slave address (i.e. known as a 'channel' for the current SPI module)

		{

		}

	}

// Init the hardware with the data provided in the transaction and slave-address field

// (these values are already stored in the iCurrHeader)

TInt DSpiMasterBeagle::ConfigureInterface()

	{

	DBGPRINT(Kern::Printf("ConfigureInterface()"));

	// soft reset the SPI..

	TUint val = AsspRegister::Read32(iHwBase + MCSPI_SYSCONFIG);

	val = MCSPI_SYSCONFIG_SOFTRESET;  // issue reset

	AsspRegister::Write32(iHwBase + MCSPI_SYSCONFIG, MCSPI_SYSCONFIG_SOFTRESET);

	val = 0; // TODO will add here this 'smart-wait' stuff that was proposed earlier..

	while (!(val & MCSPI_SYSSTATUS_RESETDONE))

		val = AsspRegister::Read32(iHwBase + MCSPI_SYSSTATUS);

	// channel configuration

	//	Set the SPI1.MCSPI_CHxCONF[18] IS bit to 0 for the spi1_somi pin in receive mode.

	//	val = MCSPI_CHxCONF_IS; // pin selection (somi - simo)

	// TODO configuration of PINS could also be configurable on a 'per SPI module' basis..

	// Set the SPI1.MCSPI_CHxCONF[17] DPE1 bit to 0 and the SPI1.MCSPI_CHxCONF[16] DPE0 bit to 1 for the spi1.simo pin in transmit mode.

	val = MCSPI_CHxCONF_DPE0;

	// Set transmit & | receive mode for transmit only mode here. If needed - it will be changed dynamically.

	val |= MCSPI_CHxCONF_TRM_NO_RECEIVE;

	// set word length.

	val |= SpiWordWidth(iCurrHeader.iWordWidth);

	// use the appropriate word with (assuming the data is aligned to bytes).

	if(iCurrHeader.iWordWidth > ESpiWordWidth_16)

		{

		iWordSize = 4;

		}

	else if (iCurrHeader.iWordWidth > ESpiWordWidth_8)

		{

		iWordSize = 2;

		}

	else

		{

		iWordSize = 1;

		}

	// set Slave Select / Chip select signal mode

	val |= iCurrHeader.iSSPinActiveMode == ESpiCSPinActiveLow ? MCSPI_CHxCONF_EPOL_LOW : 0;

	// set the CLK POL and PHA (clock mode)

	val |= SpiClkMode(iCurrHeader.iClkMode);

	// Set clock. Note that CheckHdr() will be called prior to this function for this header,

	// so the value iClkSpeedHz is valid at this point, the KErrNotSupported is not possible

	// so the return value check can be ommited here

	val |= SpiClkValue(iCurrHeader.iClkSpeedHz);

	// __ASSERT_DEBUG(val >= KErrNone, Kern::Fault("spi/master.cpp, line: ", __LINE__));

#ifdef USE_TX_FIFO

	// enable fifo for transmission..

	// Update me: this can only set in a 'single' mode.. or for only one channel

	// but at the momment IIC SPI is used in 'single' mode onlny..

	val |= MCSPI_CHxCONF_FFEW;

//	val |= MCSPI_CHxCONF_FFER; // fifo enable for receive.. (TODO)

#endif

	// update the register..

	AsspRegister::Write32(iHwBase + MCSPI_CHxCONF(iCurrSS), val);

	val = MCSPI_SYST_SPIDATDIR0;

	if(iCurrHeader.iSSPinActiveMode == ESpiCSPinActiveLow)

		{

		}

	else

		{

		}

	// Set the MS bit to 0 to provide the clock (ie. to setup as master)

#ifndef SINGLE_MODE

	AsspRegister::Write32(iHwBase + MCSPI_MODULCTRL, MCSPI_MODULCTRL_MS_MASTER);

#else

	AsspRegister::Write32(iHwBase + MCSPI_MODULCTRL, MCSPI_MODULCTRL_MS_MASTER | MCSPI_MODULCTRL_SINGLE);

#endif

	return KErrNone;

	}

TInt DSpiMasterBeagle::ProcessNextTransfers()

	{

	DBGPRINT(Kern::Printf("DSpiMasterBeagle::ProcessNextTransfers():%s", iState==EIdle ? "first" : "next"));

	// Since new transfers are strating, clear exisiting flags

	iOperation.iValue = TIicOperationType::ENop;

	// If this is the first transfer in the transaction the channel will be in state EIdle

	if(iState == EIdle)

		{

		// Get the pointer to half-duplex transfer object..

		iHalfDTransfer = GetTransHalfDuplexTferPtr(iCurrTransaction);

		// Get the pointer to full-duplex transfer object..

		iFullDTransfer = GetTransFullDuplexTferPtr(iCurrTransaction);

		// Update the channel state to EBusy and initialise the transaction status

		iState = EBusy;

		iTransactionStatus = KErrNone;

		// start timeout timer for this transaction

		StartSlaveTimeOutTimer(iCurrHeader.iTimeoutPeriod);

		}

	else

	// If not in state EIdle, get the next transfer in the linked-list held by the transaction

		{

		// Get the pointer the next half-duplex transfer object..

		iHalfDTransfer = GetTferNextTfer(iHalfDTransfer);

		// Get the pointer to the next half-duplex transfer object..

		if(iFullDTransfer)

			{

			iFullDTransfer = GetTferNextTfer(iFullDTransfer);

			}

		}

	TInt r = KErrNone;

	if(!iFullDTransfer && !iHalfDTransfer)

		{

		// There is no more to transfer - and all previous were were completed,

		DBGPRINT(Kern::Printf("All transfers completed successfully"));

		ExitComplete(KErrNone);

		}

	else

		{

		// Process next transfers

		TInt8 hDTrType = (TInt8) GetTferType(iHalfDTransfer);

		if(iFullDTransfer)

			{

			// For full-duplex transfer setup the read transfer first, as it doesn't

			// really start anything - SPI master starts operation when Tx (or clocks)starts..

			if(hDTrType == TIicBusTransfer::EMasterRead)

				{

				r = StartTransfer(iHalfDTransfer, TIicBusTransfer::EMasterRead);

				if(r != KErrNone)

					{

					return r;

					}

				r = StartTransfer(iFullDTransfer, TIicBusTransfer::EMasterWrite);

				}

			else // hDTrType == TIicBusTransfer::EMasterWrite)

				{

				r = StartTransfer(iFullDTransfer, TIicBusTransfer::EMasterRead);

				if(r != KErrNone)

					{

					return r;

					}

				r = StartTransfer(iHalfDTransfer, TIicBusTransfer::EMasterWrite);

				}

			}

		else

		// This is a HalfDuplex transfer - so just start it

			{

			r = StartTransfer(iHalfDTransfer, hDTrType);

			}

		}

	return r;

	}

TInt DSpiMasterBeagle::StartTransfer(TIicBusTransfer* aTransferPtr, TUint8 aType)

	{

	DBGPRINT(Kern::Printf("DSpiMasterBeagle::StartTransfer() @0x%x, aType: %s",

			               aTransferPtr, aType == TIicBusTransfer::EMasterWrite ? "write" : "read"));

	if(aTransferPtr == NULL)

		{

		DBG_ERR(Kern::Printf("DSpiMasterBeagle::StartTransfer - NULL pointer\n"));

		return KErrArgument;

		}

	TInt r = KErrNone;

	switch(aType)

		{

		case TIicBusTransfer::EMasterWrite:

			{

			DBGPRINT(Kern::Printf("Starting EMasterWrite, duplex=%x", iFullDTransfer));

			// Get a pointer to the transfer object's buffer, to facilitate passing arguments to DoTransfer

			const TDes8* desBufPtr = GetTferBuffer(aTransferPtr);

			DBGPRINT(Kern::Printf("Length %d, iWordSize %d", desBufPtr->Length(), iWordSize));

			// Store the current address and ending address for Transmission - they are required by the ISR and DFC

			iTxData    = (TInt8*)  desBufPtr->Ptr();

			iTxDataEnd = (TInt8*) (iTxData + desBufPtr->Length());

			if ((TInt)iTxDataEnd % iWordSize)

				{

				DBG_ERR(Kern::Printf("Wrong configuration - word size does not match buffer length"));

				return KErrArgument;

				}

			DBGPRINT(Kern::Printf("Tx: Start: %x, End %x, bytes %d", iTxData, iTxDataEnd, desBufPtr->Length()));

			// Set the flag to indicate that we'll be transmitting data

			iOperation.iOp.iIsTransmitting = ETrue;

			// initiate the transmission..

			r = DoTransfer(aType);

			if(r != KErrNone)

				{

				DBG_ERR(Kern::Printf("Starting Write failed, r = %d", r));

				}

			break;

			}

		case TIicBusTransfer::EMasterRead:

			{

			DBGPRINT(Kern::Printf("Starting EMasterRead, duplex=%x", iFullDTransfer));

			// Get a pointer to the transfer object's buffer, to facilitate passing arguments to DoTransfer

			const TDes8* aBufPtr = GetTferBuffer(aTransferPtr);

			// Store the current address and ending address for Reception - they are required by the ISR and DFC

			iRxData = (TInt8*) aBufPtr->Ptr();

			iRxDataEnd = (TInt8*) (iRxData + aBufPtr->Length());

			DBGPRINT(Kern::Printf("Rx: Start: %x, End %x, bytes %d", iRxData, iRxDataEnd, aBufPtr->Length()));

			// Set the flag to indicate that we'll be receiving data

			iOperation.iOp.iIsReceiving = ETrue;

			// initiate the reception

			r = DoTransfer(aType);

			if(r != KErrNone)

				{

				DBG_ERR(Kern::Printf("Starting Read failed, r = %d", r));

				}

			break;

			}

		default:

			{

			DBG_ERR(Kern::Printf("Unsupported TransactionType %x", aType));

			r = KErrArgument;

			break;

			}

		}

	return r;

	}

// Method called by StartTransfer to actually initiate the transfers.

TInt DSpiMasterBeagle::DoTransfer(TUint8 aType)

	{

	DBGPRINT(Kern::Printf("\nDSpiMasterBeagle::DoTransfer()"));

	TInt r = KErrNone;

	AsspRegister::Write32(iHwBase + MCSPI_IRQSTATUS, ~0);

	switch(aType)

		{

		case TIicBusTransfer::EMasterWrite:

			{

			// enable the channel here..

			AsspRegister::Write32(iHwBase + MCSPI_CHxCTRL(iCurrSS), MCSPI_CHxCTRL_EN);

			AsspRegister::Modify32(iHwBase + MCSPI_IRQSTATUS, 0,

			                       MCSPI_IRQ_TX_EMPTY(iCurrSS) /*| MCSPI_IRQ_TX_UNDERFLOW(iCurrSS)*/);

			AsspRegister::Modify32(iHwBase + MCSPI_IRQENABLE, 0,

			                       MCSPI_IRQ_TX_EMPTY(iCurrSS) /*| MCSPI_IRQ_TX_UNDERFLOW(iCurrSS)*/);

#ifdef SINGLE_MODE

			// in SINGLE mode needs to manually assert CS line for current

			AsspRegister::Modify32(iHwBase + MCSPI_CHxCONF(iCurrSS), 0, MCSPI_CHxCONF_FORCE);

			// change the pad config - now the SPI drives the line appropriately..

#endif /*SINGLE_MODE*/

#ifdef USE_TX_FIFO

			const TInt KTxFifoThreshold = 8;

			TUint numWordsToTransfer = (iTxDataEnd - iTxData);

			TUint wordsToWrite = Min(numWordsToTransfer/iWordSize, KTxFifoThreshold/iWordSize);

			TInt iAlmostFullLevel = 0;

			TInt iAlmostEmptyLevel = 1; //KTxFifoThreshold;

			// setup FIFOs

			AsspRegister::Write32(iHwBase + MCSPI_XFERLEVEL,

								  MCSPI_XFERLEVEL_WCNT(0) | // total num words

								  MCSPI_XFERLEVEL_AFL(iAlmostFullLevel)     | // Rx almost full

								  MCSPI_XFERLEVEL_AEL(iAlmostEmptyLevel) );   // Tx almost empty

			// copy data to fifo..

			for (TInt i = 0; i < wordsToWrite; i++)

				{

				iTxData += iWordSize;

				AsspRegister::Write32(iHwBase + MCSPI_TXx(iCurrSS), *(iTxData -iWordSize));

				}

#else /*USE_TX_FIFO*/

			TUint val = 0;

			for (TInt i = 0; i < iWordSize; i++)

				{

				val |= (*iTxData++) << i * 8;