//! @File

//! @SYMTestSuiteName	lbsclientmodstatusevent.script

//! @SYMScriptTestEnvironment

// Copyright (c) 2008-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

//

LOAD_SUITE LbsClientTestServer -SharedData

PRINT Run LbsClientTestServer

PRINT

//Before we start LBS, select the test A-GPS integration module and network reg status txt file to use.

PREFIX RUN_UTILS

	MkDir c:\private\10282253\

	MkDir c:\private\10282253\lbs\

	MkDir c:\private\10282253\lbs\locmods\

	CopyFile c:\testdata\configs\xtestmodule.ini c:\private\10282253\lbs\locmods\agpsintegmodule.ini

    CopyFile c:\testdata\configs\lbstestconfig.txt c:\config.txt

	DeleteFile c:\private\10282253\lbs\lbsprofile.ini

REMOVE_PREFIX

RUN_TEST_STEP 010 LbsClientTestServer LbsStep_ResetDefaultAdmin 

RUN_TEST_STEP 030 LbsClientTestServer LbsStep_StartLbs

START_TESTCASE LBS-Client-ModStatusEvent-0001

//!@SYMTestCaseID		LBS-Client-ModStatusEvent-0001

//!@SYMTestCaseDesc		Request module status event for all modules

//!

//!@SYMTestActions			1. Configure test agps module with device and data quality

//!					2. Connect to the location server.

//!					3. Set the notify module event mask to select device status event 

//!					4. Request module status event for all modules (ie do not provide a moduleid)

//!					5. Kick test agps module to cause events requested above

//!					6. Wait for events from (test) agps module and verify as below

//!

//!@SYMTestExpectedResults	Verify the correct event is returned for agps modules. Ensure the event

//!				details are correct.

//!@SYMPREQ			

//!                             PREQ786

//!@SYMREQ 			REQ786.18

//!

//!@SYMTestType			CIT

//!@SYMTestPriority		1

//!@SYMTestStatus			Implemented, test a-gps modules maybe required.

RUN_TEST_STEP 010 LbsClientTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsClientTestServer LbsStep_SetUpPsy c:\testdata\configs\LbsClientModStatusEvent.ini LBS-CLIENT-MODSTATUSEVENT

RUN_TEST_STEP 120 LbsClientTestServer LbsStep_CreateVerifyModuleData c:\testdata\configs\LbsClientModStatusEvent.ini LBS-Mod-Status-Event-0002

RUN_TEST_STEP 20 LbsClientTestServer  LbsClientStep_ModStatus c:\testdata\configs\LbsClientModStatusEvent.ini LBS-Mod-Status-Event-0002

RUN_TEST_STEP 120 LbsClientTestServer LbsStep_VerifyModuleStatus

END_TESTCASE LBS-Client-ModStatusEvent-0001

START_TESTCASE LBS-Client-ModStatusEvent-0002

//!@SYMTestCaseID		LBS-Client-ModStatusEvent-0002

//!@SYMTestCaseDesc		Request multiple module status events for a given module

//!

//!@SYMTestActions		1. Configure test agps module with device and data quality

//!				2. Connect to the location server.

//!				3. Set the notify module event mask to select device status event 

//!				4. Request module status event using module id for (test) agps module

//!				5. Kick test agps module to cause events requested above

//!				6. Wait for event and verify as below

//!				7. Repeat steps 4 to 6, to request a further status event.

//!

//!@SYMTestExpectedResults	Verify the correct events are returned for the module. Ensure the event

//!				details are correct.

//!@SYMPREQ			

//!                             PREQ786

//!@SYMREQ 			REQ786.18

//!

//!@SYMTestType			CIT

//!@SYMTestPriority		1

//!@SYMTestStatus			Implemented, test a-gps module required.

RUN_TEST_STEP 010 LbsClientTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsClientTestServer LbsStep_SetUpPsy c:\testdata\configs\LbsClientModStatusEvent.ini LBS-CLIENT-MODSTATUSEVENT

RUN_TEST_STEP 120 LbsClientTestServer LbsStep_CreateVerifyModuleData c:\testdata\configs\LbsClientModStatusEvent.ini LBS-Mod-Status-Event-0003

RUN_TEST_STEP 20 LbsClientTestServer LbsClientStep_ModStatus c:\testdata\configs\LbsClientModStatusEvent.ini LBS-Mod-Status-Event-0003

RUN_TEST_STEP 120 LbsClientTestServer LbsStep_VerifyModuleStatus

END_TESTCASE LBS-Client-ModStatusEvent-0002

START_TESTCASE LBS-Client-ModStatusEvent-0003

//!@SYMTestCaseID		LBS-Client-ModStatusEvent-0003

//!@SYMTestCaseDesc		Request module device status event for a-gps module

//!

//!@SYMTestActions		1. Configure test agps module with device and data quality

//!				2. Connect to the location server.

//!				3. Set the notify module event mask to select device status event 

//!				4. Request module status event using a valid module id for a-gps module

//!				5. Kick test agps module to cause events requested above

//!				6. Wait for event and verify as below 

//!

//!					

//!@SYMTestExpectedResults	Verify the correct event is returned for the module. Ensure the event

//!				details are correct.

//!@SYMPREQ			PREQ786

//!@SYMREQ 			REQ786.18

//!

//!@SYMTestType			CIT

//!@SYMTestPriority		1

//!@SYMTestStatus		Implemented. test a-gps required.

RUN_TEST_STEP 010 LbsClientTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsClientTestServer LbsStep_SetUpPsy c:\testdata\configs\LbsClientModStatusEvent.ini LBS-CLIENT-MODSTATUSEVENT

RUN_TEST_STEP 120 LbsClientTestServer LbsStep_CreateVerifyModuleData c:\testdata\configs\LbsClientModStatusEvent.ini LBS-Mod-Status-Event-0004

RUN_TEST_STEP 20 LbsClientTestServer LbsClientStep_ModStatus c:\testdata\configs\LbsClientModStatusEvent.ini LBS-Mod-Status-Event-0004

RUN_TEST_STEP 120 LbsClientTestServer LbsStep_VerifyModuleStatus

END_TESTCASE LBS-Client-ModStatusEvent-0003

START_TESTCASE LBS-Client-ModStatusEvent-0004

//!@SYMTestCaseID		LBS-Client-ModStatusEvent-0004

//!@SYMTestCaseDesc		Request module data quality status event

//!

//!@SYMTestActions			

//!					1. Configure test agps module with device and data quality

//!					2. Connect to the location server.

//!					3. Set the notify module event mask to select data quality status event

//!					4. Request module status event using a valid agps module id

//!					5. Kick test agps module to cause events requested above

//!					6. Wait for event and verify as below 

//!@SYMTestExpectedResults	Verify the correct data quality event is returned. Ensure the event details

//!								are correct.

//!@SYMPREQ				PREQ786

//!@SYMREQ 				REQ786.17

//!

//!@SYMTestType			CIT

//!@SYMTestPriority		1

//!@SYMTestStatus			Implemented, test a-gps module required.

RUN_TEST_STEP 010 LbsClientTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsClientTestServer LbsStep_SetUpPsy c:\testdata\configs\LbsClientModStatusEvent.ini LBS-CLIENT-MODSTATUSEVENT

RUN_TEST_STEP 120 LbsClientTestServer LbsStep_CreateVerifyModuleData c:\testdata\configs\LbsClientModStatusEvent.ini LBS-Mod-Status-Event-0005

RUN_TEST_STEP 20 LbsClientTestServer LbsClientStep_ModStatus c:\testdata\configs\LbsClientModStatusEvent.ini LBS-Mod-Status-Event-0005

RUN_TEST_STEP 120 LbsClientTestServer LbsStep_VerifyModuleStatus

END_TESTCASE LBS-Client-ModStatusEvent-0004

START_TESTCASE LBS-Client-ModStatusEvent-0005

//!@SYMTestCaseID		LBS-Client-ModStatusEvent-0005

//!@SYMTestCaseDesc		Request system module status event - system module error.

//!

//!@SYMTestActions		1. configure system to be transient

//!				2. use agps test module that leaves during install or have a configuration file with no binary (Billy's suggestions)

//!				3. Connect to the location server.

//!				4. Set the notify module event mask to select system status event

//!				5. Request module status event using agps module id

//!				6. Cause a-gps manager to attempt to install agps module (how?)

//!				7. Wait for event and verify as below 

//!							

//!@SYMTestExpectedResults	Verify the correct system module error event is returned for. Ensure the

//!				event details are correct.

//!@SYMPREQ			

//!                             PREQ786

//!@SYMREQ 			REQXXX.XX

//!

//!@SYMTestType			CIT

//!@SYMTestPriority		1

//!@SYMTestStatus		Not Implemented. Requires leaving test agps module. Needs to be in a different script file since requires 'transient' config?

END_TESTCASE LBS-Client-ModStatusEvent-0005

START_TESTCASE LBS-Client-ModStatusEvent-0006

//!@SYMTestCaseID		LBS-Client-ModStatusEvent-0006

//!@SYMTestCaseDesc		Request system module status event - system module installed.

//!

//!@SYMTestActions		1. configure system to be transient

//!				2. Connect to the location server.

//!				3. Set the notify module event mask to select system status event

//!				4. Request module status event using agps module id

//!				5. Cause a-gps manager to attempt to install agps module (how?)

//!				6. Wait for event and verify as below 

//!				

//!@SYMTestExpectedResults	Verify the correct system module installed event is returned. Ensure the

//!								event details are correct.

//!@SYMPREQ				PREQ786

//!@SYMREQ 				REQXXX.XX

//!

//!@SYMTestType			CIT

//!@SYMTestPriority		2

//!@SYMTestStatus			Not Implemented. Requires leaving test agps module. Needs to be in a different script file since requires 'transient' config?

END_TESTCASE LBS-Client-ModStatusEvent-0006

START_TESTCASE LBS-Client-ModStatusEvent-0007

//!@SYMTestCaseID		LBS-Client-ModStatusEvent-0007

//!@SYMTestCaseDesc		Request system module status event - system module removed

//!

//!@SYMTestActions		1. configure system to be transient

//!				2. Connect to the location server.

//!				3. Set the notify module event mask to select system status event

//!				4. Request module status event using agps module id

//!				5. Cause a-gps manager to attempt to install agps module (how?)

//!				6. Wait for install event (?)

//!				7. Wait long enough (how long's that?) for a-gps mgr to uninstall a-gps module

//!				8. Wait for event and verify as below

//!							

//!@SYMTestExpectedResults	Verify the correct system module error event is returned. Ensure the

//!								event details are correct.

//!@SYMPREQ				PREQ786

//!@SYMREQ 				REQXXX.XX

//!

//!@SYMTestType			CIT

//!@SYMTestPriority		2

//!@SYMTestStatus			Not Implemented. Needs to be in a different script file since requires 'transient' config?

END_TESTCASE LBS-Client-ModStatusEvent-0007

START_TESTCASE LBS-Client-ModStatusEvent-0008

//!@SYMTestCaseID		LBS-Client-ModStatusEvent-0008

//!@SYMTestCaseDesc		Request devicestatus and device quality status events

//!

//!@SYMTestActions		1. Configure test agps module with device and data quality

//!				2. Connect to the location server.

//!				3. Set the notify module event mask to select both status events

//!				4. Request module status event using a-gps module id

//!				5. Kick test agps module to cause events requested above

//!				6. Wait for all module status events and verify as below

//!							

//!@SYMTestExpectedResults	Verify all the correct events are returned. Ensure the event details are

//!								correct.

//!@SYMPREQ			PREQ786

//!@SYMREQ 			REQ786.17

//!@SYMREQ 			REQ786.18

//!

//!@SYMTestType			CIT

//!@SYMTestPriority		1

//!@SYMTestStatus			Implemented, test module required.

RUN_TEST_STEP 010 LbsClientTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsClientTestServer LbsStep_SetUpPsy c:\testdata\configs\LbsClientModStatusEvent.ini LBS-CLIENT-MODSTATUSEVENT

RUN_TEST_STEP 120 LbsClientTestServer LbsStep_CreateVerifyModuleData c:\testdata\configs\LbsClientModStatusEvent.ini LBS-Mod-Status-Event-0009

RUN_TEST_STEP 20 LbsClientTestServer LbsClientStep_ModStatus c:\testdata\configs\LbsClientModStatusEvent.ini LBS-Mod-Status-Event-0009

RUN_TEST_STEP 120 LbsClientTestServer LbsStep_VerifyModuleStatus

END_TESTCASE LBS-Client-ModStatusEvent-0008

START_TESTCASE LBS-Client-ModStatusEvent-0009

//!@SYMTestCaseID		LBS-Client-ModStatusEvent-0009

//!@SYMTestCaseDesc		Request module status event for a non-existing module

//!

//!@SYMTestActions		1. Connect to the location server.

//!				2. Set the notify module event mask to select all status events

//!				3. Request module status event using an in-valid module id

//!				4. Wait for module status event and verify as below

//!

//!@SYMTestExpectedResults	Verify the correct error is returned (KErrNotFound).

//!

//!@SYMPREQ			PREQ786

//!@SYMREQ 			REQ786.17

//!@SYMREQ 			REQ786.18

//!

//!@SYMTestType			CIT

//!@SYMTestPriority		2

//!@SYMTestStatus			Implemented.

RUN_TEST_STEP 010 LbsClientTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsClientTestServer LbsStep_SetUpPsy c:\testdata\configs\LbsClientModStatusEvent.ini LBS-CLIENT-MODSTATUSEVENT

RUN_TEST_STEP 20 LbsClientTestServer LbsClientStep_ModStatus c:\testdata\configs\LbsClientModStatusEvent.ini LBS-Mod-Status-Event-0010

END_TESTCASE LBS-Client-ModStatusEvent-0009

// Not a valid test on variant2

//START_TESTCASE LBS-Client-ModStatusEvent-0010

//!@SYMTestCaseID		LBS-Client-ModStatusEvent-0010

//!@SYMTestCaseDesc		Request module status event when no events have been requested

//!

//!@SYMTestActions		1. Connect to the location server.

//!				2. Set the notify module event mask to select no events

//!				3. Request module status event using a valid module id

//!				4. Wait for module status event and verify as below

//!								

//!@SYMTestExpectedResults	Verify the correct error is returned (KErrArgument).

//!

//!@SYMPREQ			PREQ786

//!@SYMREQ 			REQ786.17

//!@SYMREQ 			REQ786.18

//!

//!@SYMTestType			CIT

//!@SYMTestPriority		2

//!@SYMTestStatus			Implemented. 

//RUN_TEST_STEP 010 LbsClientTestServer LbsStep_InstallScheduler

//RUN_TEST_STEP 020 LbsClientTestServer LbsStep_SetUpPsy c:\testdata\configs\LbsClientModStatusEvent.ini LBS-CLIENT-MODSTATUSEVENT

//RUN_TEST_STEP 20 LbsClientTestServer LbsClientStep_ModStatus c:\testdata\configs\LbsClientModStatusEvent.ini LBS-Mod-Status-Event-0011

//END_TESTCASE LBS-Client-ModStatusEvent-0010

START_TESTCASE LBS-Client-ModStatusEvent-0011

//!@SYMTestCaseID			LBS-Client-ModStatusEvent-0011

//!@SYMTestCaseDesc		Cancel module status event request

//!

//!@SYMTestActions		1. Connect to the location server.

//!				2. Set the notify module event mask to select device status event

//!				3. Request module status event using a-gps module id

//!				4. Cancel module status event

//!				5. Wait for event to be cancelled and verify as below.

//!

//!@SYMTestExpectedResults	Request completed with the correct error (KErrCancel).

//!

//!@SYMPREQ			PREQ786

//!@SYMREQ 			REQ786.13

//!@SYMREQ 			REQ786.17

//!@SYMREQ 			REQ786.18

//!

//!@SYMTestType			CIT

//!@SYMTestPriority		1

//!@SYMTestStatus			Implemented.

RUN_TEST_STEP 010 LbsClientTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsClientTestServer LbsStep_SetUpPsy c:\testdata\configs\LbsClientModStatusEvent.ini LBS-CLIENT-MODSTATUSEVENT

RUN_TEST_STEP 20 LbsClientTestServer LbsClientStep_ModStatus c:\testdata\configs\LbsClientModStatusEvent.ini LBS-Mod-Status-Event-0012

END_TESTCASE LBS-Client-ModStatusEvent-0011

START_TESTCASE LBS-Client-ModStatusEvent-0012

//!@SYMTestCaseID		LBS-Client-ModStatusEvent-0012

//!@SYMTestCaseDesc		Cancel a non-existent module status event request

//!

//!@SYMTestActions		1. Connect to the location server.

//!				2. Cancel module status event 

//!				Note: do not request module status event.

//!

//!@SYMTestExpectedResults	Verify the correct bad argument error (KErrNotFound) is returned to

//!						indicate there is no outstanding request with the specified ID.

//!@SYMPREQ				PREQ786

//!@SYMREQ 				REQ786.13

//!@SYMREQ 				REQ786.17

//!@SYMREQ 				REQ786.18

//!

//!@SYMTestType			CIT

//!@SYMTestPriority		2

//!@SYMTestStatus			Implemented. 

RUN_TEST_STEP 010 LbsClientTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsClientTestServer LbsStep_SetUpPsy c:\testdata\configs\LbsClientModStatusEvent.ini LBS-CLIENT-MODSTATUSEVENT

RUN_TEST_STEP 20 LbsClientTestServer LbsClientStep_ModStatus c:\testdata\configs\LbsClientModStatusEvent.ini LBS-Mod-Status-Event-0013

END_TESTCASE LBS-Client-ModStatusEvent-0012

START_TESTCASE LBS-Client-ModStatusEvent-0013

//!@SYMTestCaseID		LBS-Client-ModStatusEvent-0013

//!@SYMTestCaseDesc		Request module status event with no server connection

//!

//!@SYMTestActions		1. Cancel a module status event request - use CancelRequest().

//!				  Note: no server connection is carried out and the request ID is not valid.

//!

//!@SYMTestExpectedResults	Verify the correct panic (EPositionServerBadHandle) is given, as a result of not having a connection

//!								established with the location server.

//!@SYMPREQ				PREQ786

//!@SYMREQ 				REQ786.13

//!@SYMREQ 				REQ786.17

//!@SYMREQ 				REQ786.18

//!

//!@SYMTestType			CIT

//!@SYMTestPriority		2

//!@SYMTestStatus			Not Implemented.

RUN_TEST_STEP 010 LbsClientTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsClientTestServer LbsStep_SetUpPsy c:\testdata\configs\LbsClientModStatusEvent.ini LBS-CLIENT-MODSTATUSEVENT

RUN_TEST_STEP !PanicCode=6 20 LbsClientTestServer LbsClientStep_ModStatus c:\testdata\configs\LbsClientModStatusEvent.ini LBS-Mod-Status-Event-0014

END_TESTCASE LBS-Client-ModStatusEvent-0013

RUN_TEST_STEP 030 LbsClientTestServer LbsStep_StopLbs

// Re-select the real A-GPS integration module.

RUN_UTILS DeleteFile c:\private\10282253\lbs\locmods\agpsintegmodule.ini

// Delete network registration status text file

RUN_UTILS DeleteFile c:\config.txt