/****************************************************************************

**

** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).

** All rights reserved.

** Contact: Nokia Corporation (qt-info@nokia.com)

**

** This file is part of the examples of the Qt Toolkit.

**

** $QT_BEGIN_LICENSE:LGPL$

** No Commercial Usage

** This file contains pre-release code and may not be distributed.

** You may use this file in accordance with the terms and conditions

** contained in the Technology Preview License Agreement accompanying

** this package.

**

** GNU Lesser General Public License Usage

** Alternatively, this file may be used under the terms of the GNU Lesser

** General Public License version 2.1 as published by the Free Software

** Foundation and appearing in the file LICENSE.LGPL included in the

** packaging of this file.  Please review the following information to

** ensure the GNU Lesser General Public License version 2.1 requirements

** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.

**

** In addition, as a special exception, Nokia gives you certain additional

** rights.  These rights are described in the Nokia Qt LGPL Exception

** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.

**

** If you have questions regarding the use of this file, please contact

** Nokia at qt-info@nokia.com.

**

**

**

**

**

**

**

**

** $QT_END_LICENSE$

**

****************************************************************************/

#include <QGLWidget>

#include <QMatrix4x4>

#include <QVector3D>

#include <qmath.h>

#include "qtlogo.h"

static const qreal tee_height = 0.311126;

static const qreal cross_width = 0.25;

static const qreal bar_thickness = 0.113137;

static const qreal inside_diam = 0.20;

static const qreal outside_diam = 0.30;

static const qreal logo_depth = 0.10;

static const int num_divisions = 32;

//! [0]

struct Geometry

{

    QVector<GLushort> faces;

    QVector<QVector3D> vertices;

    QVector<QVector3D> normals;

    void appendSmooth(const QVector3D &a, const QVector3D &n, int from);

    void appendFaceted(const QVector3D &a, const QVector3D &n);

    void finalize();

    void loadArrays() const;

};

//! [0]

//! [1]

class Patch

{

public:

    enum Smoothing { Faceted, Smooth };

    Patch(Geometry *);

    void setSmoothing(Smoothing s) { sm = s; }

    void translate(const QVector3D &t);

    void rotate(qreal deg, QVector3D axis);

    void draw() const;

    void addTri(const QVector3D &a, const QVector3D &b, const QVector3D &c, const QVector3D &n);

    void addQuad(const QVector3D &a, const QVector3D &b,  const QVector3D &c, const QVector3D &d);

    GLushort start;

    GLushort count;

    GLushort initv;

    GLfloat faceColor[4];

    QMatrix4x4 mat;

    Smoothing sm;

    Geometry *geom;

};

//! [1]

static inline void qSetColor(float colorVec[], QColor c)

{

    colorVec[0] = c.redF();

    colorVec[1] = c.greenF();

    colorVec[2] = c.blueF();

    colorVec[3] = c.alphaF();

}

void Geometry::loadArrays() const

{

    glVertexPointer(3, GL_FLOAT, 0, vertices.constData());

    glNormalPointer(GL_FLOAT, 0, normals.constData());

}

void Geometry::finalize()

{

    // TODO: add vertex buffer uploading here

    // Finish smoothing normals by ensuring accumulated normals are returned

    // to length 1.0.

    for (int i = 0; i < normals.count(); ++i)

        normals[i].normalize();

}

void Geometry::appendSmooth(const QVector3D &a, const QVector3D &n, int from)

{

    // Smooth normals are acheived by averaging the normals for faces meeting

    // at a point.  First find the point in geometry already generated

    // (working backwards, since most often the points shared are between faces

    // recently added).

    int v = vertices.count() - 1;

    for ( ; v >= from; --v)

        if (qFuzzyCompare(vertices[v], a))

            break;

    if (v < from)

    {

        // The vert was not found so add it as a new one, and initialize

        // its corresponding normal

        v = vertices.count();

        vertices.append(a);

        normals.append(n);

    }

    else

    {

        // Vert found, accumulate normals into corresponding normal slot.

        // Must call finalize once finished accumulating normals

        normals[v] += n;

    }

    // In both cases (found or not) reference the vert via its index

    faces.append(v);

}

void Geometry::appendFaceted(const QVector3D &a, const QVector3D &n)

{

    // Faceted normals are achieved by duplicating the vert for every

    // normal, so that faces meeting at a vert get a sharp edge.

    int v = vertices.count();

    vertices.append(a);

    normals.append(n);

    faces.append(v);

}

Patch::Patch(Geometry *g)

   : start(g->faces.count())

   , count(0)

   , initv(g->vertices.count())

   , sm(Patch::Smooth)

   , geom(g)

{

    qSetColor(faceColor, QColor(Qt::darkGray));

}

void Patch::rotate(qreal deg, QVector3D axis)

{

    mat.rotate(deg, axis);

}

void Patch::translate(const QVector3D &t)

{

    mat.translate(t);

}

static inline void qMultMatrix(const QMatrix4x4 &mat)

{

    if (sizeof(qreal) == sizeof(GLfloat))

        glMultMatrixf((GLfloat*)mat.constData());

#ifndef QT_OPENGL_ES

    else if (sizeof(qreal) == sizeof(GLdouble))

        glMultMatrixd((GLdouble*)mat.constData());

#endif

    else

    {

        GLfloat fmat[16];

        qreal const *r = mat.constData();

        for (int i = 0; i < 16; ++i)

            fmat[i] = r[i];

        glMultMatrixf(fmat);

    }

}

//! [2]

void Patch::draw() const

{

    glPushMatrix();

    qMultMatrix(mat);

    glMaterialfv(GL_FRONT_AND_BACK, GL_AMBIENT_AND_DIFFUSE, faceColor);

    const GLushort *indices = geom->faces.constData();

    glDrawElements(GL_TRIANGLES, count, GL_UNSIGNED_SHORT, indices + start);

    glPopMatrix();

}

//! [2]

void Patch::addTri(const QVector3D &a, const QVector3D &b, const QVector3D &c, const QVector3D &n)

{

    QVector3D norm = n.isNull() ? QVector3D::normal(a, b, c) : n;

    if (sm == Smooth)

    {

        geom->appendSmooth(a, norm, initv);

        geom->appendSmooth(b, norm, initv);

        geom->appendSmooth(c, norm, initv);

    }

    else

    {

        geom->appendFaceted(a, norm);

        geom->appendFaceted(b, norm);

        geom->appendFaceted(c, norm);

    }

    count += 3;

}

void Patch::addQuad(const QVector3D &a, const QVector3D &b,  const QVector3D &c, const QVector3D &d)

{

    QVector3D norm = QVector3D::normal(a, b, c);

    if (sm == Smooth)

    {

        addTri(a, b, c, norm);

        addTri(a, c, d, norm);

    }

    else

    {

        // If faceted share the two common verts

        addTri(a, b, c, norm);

        int k = geom->vertices.count();

        geom->appendSmooth(a, norm, k);

        geom->appendSmooth(c, norm, k);

        geom->appendFaceted(d, norm);

        count += 3;

    }

}

static inline QVector<QVector3D> extrude(const QVector<QVector3D> &verts, qreal depth)

{

    QVector<QVector3D> extr = verts;

    for (int v = 0; v < extr.count(); ++v)

        extr[v].setZ(extr[v].z() - depth);

    return extr;

}

class Rectoid

{

public:

    void translate(const QVector3D &t)

    {

        for (int i = 0; i < parts.count(); ++i)

            parts[i]->translate(t);

    }

    void rotate(qreal deg, QVector3D axis)

    {

        for (int i = 0; i < parts.count(); ++i)

            parts[i]->rotate(deg, axis);

    }

    // No special Rectoid destructor - the parts are fetched out of this member

    // variable, and destroyed by the new owner

    QList<Patch*> parts;

};

class RectPrism : public Rectoid

{

public:

    RectPrism(Geometry *g, qreal width, qreal height, qreal depth);

};

RectPrism::RectPrism(Geometry *g, qreal width, qreal height, qreal depth)

{

    enum { bl, br, tr, tl };

    Patch *fb = new Patch(g);

    fb->setSmoothing(Patch::Faceted);

    // front face

    QVector<QVector3D> r(4);

    r[br].setX(width);

    r[tr].setX(width);

    r[tr].setY(height);

    r[tl].setY(height);

    QVector3D adjToCenter(-width / 2.0, -height / 2.0, depth / 2.0);

    for (int i = 0; i < 4; ++i)

        r[i] += adjToCenter;

    fb->addQuad(r[bl], r[br], r[tr], r[tl]);

    // back face

    QVector<QVector3D> s = extrude(r, depth);

    fb->addQuad(s[tl], s[tr], s[br], s[bl]);

    // side faces

    Patch *sides = new Patch(g);

    sides->setSmoothing(Patch::Faceted);

    sides->addQuad(s[bl], s[br], r[br], r[bl]);

    sides->addQuad(s[br], s[tr], r[tr], r[br]);

    sides->addQuad(s[tr], s[tl], r[tl], r[tr]);

    sides->addQuad(s[tl], s[bl], r[bl], r[tl]);

    parts << fb << sides;

}

class RectTorus : public Rectoid

{

public:

    RectTorus(Geometry *g, qreal iRad, qreal oRad, qreal depth, int numSectors);

};

RectTorus::RectTorus(Geometry *g, qreal iRad, qreal oRad, qreal depth, int k)

{

    QVector<QVector3D> inside;

    QVector<QVector3D> outside;

    for (int i = 0; i < k; ++i) {

        qreal angle = (i * 2 * M_PI) / k;

        inside << QVector3D(iRad * qSin(angle), iRad * qCos(angle), depth / 2.0);

        outside << QVector3D(oRad * qSin(angle), oRad * qCos(angle), depth / 2.0);

    }

    inside << QVector3D(0.0, iRad, 0.0);

    outside << QVector3D(0.0, oRad, 0.0);

    QVector<QVector3D> in_back = extrude(inside, depth);

    QVector<QVector3D> out_back = extrude(outside, depth);

    // Create front, back and sides as seperate patches so that smooth normals

    // are generated for the curving sides, but a faceted edge is created between

    // sides and front/back

    Patch *front = new Patch(g);

    for (int i = 0; i < k; ++i)

        front->addQuad(outside[i], inside[i],

                       inside[(i + 1) % k], outside[(i + 1) % k]);

    Patch *back = new Patch(g);

    for (int i = 0; i < k; ++i)

        back->addQuad(in_back[i], out_back[i],

                      out_back[(i + 1) % k], in_back[(i + 1) % k]);

    Patch *is = new Patch(g);

    for (int i = 0; i < k; ++i)

        is->addQuad(in_back[i], in_back[(i + 1) % k],

                    inside[(i + 1) % k], inside[i]);

    Patch *os = new Patch(g);

    for (int i = 0; i < k; ++i)

        os->addQuad(out_back[(i + 1) % k], out_back[i],

                    outside[i], outside[(i + 1) % k]);

    parts << front << back << is << os;

}

QtLogo::QtLogo(QObject *parent, int divisions, qreal scale)

    : QObject(parent)

    , geom(new Geometry())

{

    buildGeometry(divisions, scale);

}

QtLogo::~QtLogo()

{

    qDeleteAll(parts);

    delete geom;

}

void QtLogo::setColor(QColor c)

{

    for (int i = 0; i < parts.count(); ++i)

        qSetColor(parts[i]->faceColor, c);

}

//! [3]

void QtLogo::buildGeometry(int divisions, qreal scale)

{

    qreal cw = cross_width * scale;

    qreal bt = bar_thickness * scale;

    qreal ld = logo_depth * scale;

    qreal th = tee_height *scale;

    RectPrism cross(geom, cw, bt, ld);

    RectPrism stem(geom, bt, th, ld);

    QVector3D z(0.0, 0.0, 1.0);

    cross.rotate(45.0, z);

    stem.rotate(45.0, z);

    qreal stem_downshift = (th + bt) / 2.0;

    stem.translate(QVector3D(0.0, -stem_downshift, 0.0));

    RectTorus body(geom, 0.20, 0.30, 0.1, divisions);

    parts << stem.parts << cross.parts << body.parts;

    geom->finalize();

}

//! [3]

//! [4]

void QtLogo::draw() const

{

    geom->loadArrays();

    glEnableClientState(GL_VERTEX_ARRAY);

    glEnableClientState(GL_NORMAL_ARRAY);

    for (int i = 0; i < parts.count(); ++i)

        parts[i]->draw();

    glDisableClientState(GL_VERTEX_ARRAY);

    glDisableClientState(GL_NORMAL_ARRAY);

}

//! [4]